Essbase DataExport to relational: where to define the dsn?

I am running Essbase 11.1.1.2, and using DataExport in a calc to generate a flat file. Now I want to push the data into a relational table using:
DATAEXPORT "DSN" "dsnName" "tableName" "userName" "password"
What do I need to do to get the 'dsnName' recognizable to the Essbase server? ODBC, tnsnames? I assume whatever I do should be done on the Essbase server and not on the client where I am running EAS.
Thanks

Thank you John. After updating the odbc.ini file, do I need to restart the Hyperion services? I am expecting that I will see an entry in the 'sql data source' on the left side of the 'open sql data sources' for load rules, but this dropdown and radio button is disabled, but then I have not entered the 'connect' information on the right-hand of 'server', 'application', 'database' or 'dictionary path'. I was expecting that I would have different options here, for the Oracle database.
? Thanks - Davis

Similar Messages

  • WTA: where to define the variable in GBB0 or GBB1

    Dear gurus,
    I found our company has GGB0/GGB1 prerequisite as below:
    COBL-HKONT IN R_HKONT1 OR
    COBL-HKONT IN R_HKONT2
    My question is where and how do we define the R_HKONT1 and R_HKONT2?
    Anyone keen to show the steps?
    Thanks in advance.

    Hello Alexander,
    These are nothing but Sets.
    You need to create the Sets in Transaction Code GS01.
    For change: Tx. Code is GS02
    For Display: TX. code is GS03.
    BR
    Amitash

  • Where to define the details of employment offer in E-recruiting?

    Any one knows, where can the recuiter define the details of employment offer in E-recruiting, for example, salary, onboard date.  what's the process for recuiter to do this?

    Hi,
    Even I was facing the same problem.
    There is no provision in SAP E-rec for the same.
    As if you have seen the standard SAP letter there is no annexure for the salary or its break up.
    there are two approaches to this
    a) You change the letter before sending it to the candidate as all the letters in SAP E-rec can be modified.
    b) I had developed a questionnaire which I ask the recruiter to fill prior to generating the offer letter and then a code was written in the smart form to read the questionnaire with the break up of salary components.
    The second approach was what I followed however in this thesmartform for offer letter had lots of Zcode to read the questionnaire.
    Regards,
    Divya

  • Inserting a Lead (can't find where to define the URL)

    Hi Everyone,
    I am doing a Lead-insert using a WebApplication. I've added the Lead_v2.wsdl as a service reference. First i'll get the SessionId by logging in. Works like a charm.
    But I can't define where to actually define the URL to where it's suppose to post the data. In almost every example there is a URL-paramater, combined with the jsessionid.
    // Initiate the integration (Here is where I access my SessionId by doing crmOnemand.SessionId
    var crmOnDemand = new CRMOnDemand();
    var myLead = new VitroLife.LeadReference.LeadClient();
    // here is where the url-paramater is suppose to be?
    // mylead.url = url+crmOnDemand.SessionId
    // Create arrary of a Lead record to be inserted
    LeadReference.LeadData[] leadData = new LeadReference.LeadData[1];
    leadData[0] = new LeadReference.LeadData();
    leadData[0].Source = hdnSource.Value;
    leadData[0].Owner = hdnLeadOwner.Value;
    // Missing field priority
    leadData[0].IndexedPick1 = ddlRegion.SelectedValue;
    leadData[0].Product_Interest = chkInterest.SelectedValue;
    leadData[0].LeadFirstName = txtFirstname.Text;
    leadData[0].LeadLastName = txtLastname.Text;
    leadData[0].LeadEmail = txtEmail.Text;
    leadData[0].Description = txtComments.Text;
    // Add lead data array to ListofLeadData class
    var listOfLeadData = new LeadReference.ListOfLeadData();
    listOfLeadData.Lead = leadData;
    // Create an instance of leadinsert_input class
    var leadInsertInput = new LeadReference.LeadInsert_Input();
    leadInsertInput.ListOfLead = listOfLeadData;
    // Insert the data
    var leadOutput = myLead.LeadInsert(leadInsertInput);

    I'm having a very similar problem; there simply is no checkbox visible for the remote. This is especially puzzling since it's worked on this same laptop in the past.
    A short list of fixes I've tried for the issue:
    - Created a new user account, logged it in, checked for appropriate preference.
    - Erased preferences folder for Security and restarted.
    - Reinstalled 10.5 using "Archive and Install".
    - Reinstalled 10.5 using "Erase and Install" and restored from a TM backup.
    - Reinstalled 10.5 as a blank slate, no restore at all.
    - Reinstalled 10.4 using the original install DVDs.
    The USB tab in System Profiler +does not+ show an entry for the IR Receiver, which is puzzling, since, as far as I'm aware, all MBPs have one, and there's been one working on this laptop previously.
    I don't mind saying I'm a little bit at wits' end with this, since I don't really care to go through the installation packages and try to manually install the IR driver if I can possibly avoid it. Any thoughts?

  • Report template : where are defined the class

    Hello,
    I'm looking where the class are defined, such used in "before rows"
    <td><table cellpadding="0" border="0" cellspacing="0" summary="" class="t1standard">
    I'd like to add by owns or to modify existing one.

    Hello,
    It's in the css file if you open up the page template there should be something like.
    <link rel="stylesheet" href="#IMAGE_PREFIX#carl/theme_1/theme_V2.css" type="text/css" />
    and thats the css file that is being used by your pages. Either edit that file (discouraged) add another file right after it it that overrides the classes you want to change or just change it inline in the page header or the template.
    Take a look at this http://www.brainjar.com/css/using/
    Carl

  • Where to define the Business Area in SAP?

    Hi All,
    could anyone tell me where is created a Business Area in SAP?
    thanks
    Gandalf

    Hi,
    Please follow the below path to create Business area.
    IMG --> Enterprise Structure --> Definition --> Financial Accounting --> Define business area
    Thanks,
    Giridhar

  • Where are defined the keybindings for keyboard navigation on a JTree?

    I guess in the JTree.java file but I can't find the line of that tells the JTree to expand a node when you press the + key.

    Do you mean, where is the binding (i.e., the InputMap) created? For the most part, they're generated by the by the LookAndFeel and stored in the UIDefaults table under the keys "FocusInputMap", "AncestorInputMap" and "ComponentInputMap". Most will be found in BasicLookAndFeel.java, but the concrete LnF may override some of them. Also, some UI delegates generate or add to the InputMaps; I know BasicEditorPaneUI does.
    If you want the code for the action itself, it's in BasicTreeUI.java, in the inner class "Actions".

  • Essbase vs. Relational Data Warehouse (Which one is the fact table in DW)?

    Guys, thanks in advance for your feedback but below is a simple question i am trying to get feedback on. I am trying to compare an Essbase cube to Relational Data Warehouse containing the same set of information:
    Essbase Dimensions
    Time, Account, Product, Scenario (making it easy)
    Relational Data Warehouse
    Time (dim), Account (dim), Product (dim), Scenario (Fact table)
    OR
    Time (dim), Product (dim), Scenario (dim), Account (Fact Table)
    Which of the relational lines is correct? Is Account the fact table? or Scenario the fact table? Account will contain your usual P&L accounts. Scenario will contain your usual Actual, Budget and Forecast scenarios.
    Thanks,

    I am so not a DW guy, it's amazing, but I've never let little more than a brush with a product stop me from posting...
    Wouldn't all of your dimensions need to be in your fact table? How else would you join from the fact table to the dimensions?
    In either layout, wouldn't you have the keys for Product, Time, Scenario, Acount, and then data in the fact table?
    Or are you talking about the last dimension in your layouts be the columns? If that were the case (and I don't know that it is), I would guess that Scenario changes less, so it would be in columns, although I can definitely see that not being efficient as you are likely to pull all or some of the Accounts for a given time, product and scenario versus all of the scenarios for a given time, product, and account.
    I'm really curious about this as I am just the consumer of star schemas, never (thankfully, and obviously, given the above insane ramblings) the designer of them.
    Regards,
    Cameron Lackpour

  • Where to define third party logical system name in file to idoc scenario

    Hi Friends,
      I am shalini shah.
    I have one doubt, where I can define the logical system name in File to Idoc scenario.
    I created Logical system for R/3 system in SALE t.code, but where to define the Third party logical system ,
    In SALE or any where.
    Please give me solution.
    Warm Regards,
    Shalini Shah

    Hi Shalini,
    You need to create Business system in SLD and import the business system in ID.Then u will start with the configuration.
    Just refer the below link for configurations with step by step solution.
    File To IDOC - Part1 (SLD and Design):
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
    File To IDOC - Part2 (Configuration):
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
    File To IDOC - Part3 (Steps required in XI and R3):
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
    Thnx
    Chirag

  • Where to define remote function module name in RFC adapter

    R/2(IDOC) <->XI <-> R/3 (RFC)
    I can only define remote server information in RFC receiver adpater, but where to define the function module on remote server&#65311;

    Hi,
    the communication channel need the request in an specific xml format.
    Part of this format is the function modul name.
    when you use an imported rfc module you have automaticly the right xml format which the communication channel understand.
    the Communication channel need as root tag the function module name
    like:
    <ns0:Z_MY_FUNCTION xmlns:ns0="urn.sap-com:document:sap:rfc:functions">
    so it is with xslt mappings (for example) as well possible to call a rfc modules without importing it into your repository.
    regards,
    Robin

  • Hyperion Shared Services Import security files where to define roles-11.1.2

    Hi,
    I want to create the shared services security import file. Do anyone knows where to define the group or user roles for it. Earlier we have to changes in CSImportexport.
    Now in version 11.1.2.1 things are different.
    Do anyone knows about it.
    Thanks!!!!

    Thanks for the reply.
    I am taking export only first and this is what i got from export, if you see below under role id there are some codes generated internally, if I have to give any group different roles like planner, application creator, interactive user... where in csv file I can define those.
    #provisioning     
    project_name ----------     application_name     -----role_id     --------------------------------------------------------------------------------------------- product_typ--------user_id-------     user_provider     
    Default Application Group---     CPSPlan-----     native://DN=cn=HP:0003,ou=HP,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE--     HP-11.1.2.0-------     admin--------Native Directory     
    Default Application Group---     CPSPlan-----     native://DN=cn=HUB:2,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE---     HUB-11.1.2.0-----     admin--------Native Directory     
    Default Application Group---     CPSPlan-----     native://DN=cn=HP:0001,ou=HP,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE--     HP-11.1.2.0-------     devusr-------Native Directory     
    Default Application Group---     CPSPlan-----     native://DN=cn=HP:0001,ou=HP,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE--     HP-11.1.2.0-------     OMBUsr-----     Native Directory     
    Default Application Group---     CPSPlan------native://DN=cn=HP:0003,ou=HP,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE--HP-11.1.2.0-------     processadmin-----     Native Directory     
    Regards.

  • Using dataexport in a business rules and define the filename with a sub var

    Hi,
    I have created a calc script to export data using DATAEXPORT, and to define the filename an essbase variable.
    Here all right
    I copy this code to a business rules to run it from a business rules, but I have a problem with the essbase variable, when I validate it, it gives me the error:
    Detail:Encountered "&FileNm" at line 28, column 26.
    Was expecting:
    My essbase variable is set to:
    "e:\Hyperion\products\Essbase\EssbaseServer\app\TMPGB\dataexportCustomerY2.txt"
    in double quote
    How anyone use in a Business rules with the command dataexport an essbase substitution variable

    Just tried:
    Script: DATAEXPORT "File" " " &Filename "#Missing";
    SubsVar: "c:\DataExtract.txt"
    it worked with no issues.
    Cheers,
    Alp

  • In the context of Business Service, where to define

    Hi,
        When we use Business system, there will be corresponding Technical System, and associated Products and SWCV. So it is very clear Where to declare my SWCV in SLD. And no confusion  about transporting SLD objects.
      But with Business service, It is not declared in SLD, So there is no related Technical System, no product. But I need to define SWCV so that i can import in to repository to define my design objects(DT,MT,MM etc).
    Here are my questions.
    1. In which Product i need to define the SWCV?
    2. Do i have to have a product associated with every SWCV?
    3. Do i have to have a Technical system when i use Business service?
    4. How do I transport SWCVs from dev SLD to TEST SLD, without Technical system and Business System?
    5.Do i need to transport the SWCVs from dev SLD to test SLD as it working fine without doing SLD transport?
    Thankx
    Moni

    Hi Moni,
    In case of business service you are only defining interfaces in integration directory. It can use more then one software component version. You need to transport content in sld only in such case when you have development, quality and production sld.
    /wojciech
    > Hi,
    > When we use Business system, there will be
    > corresponding Technical System, and associated
    > Products and SWCV. So it is very clear Where to
    > declare my SWCV in SLD. And no confusion  about
    >  transporting SLD objects.
    > But with Business service, It is not declared in
    > SLD, So there is no related Technical System, no
    > product. But I need to define SWCV so that i can
    > import in to repository to define my design
    >  objects(DT,MT,MM etc).
    > Here are my questions.
    >  1. In which Product i need to define the SWCV?
    it doesn't matter
    > 2. Do i have to have a product associated with every
    > SWCV?
    actually all swcv should be in some product
    > 3. Do i have to have a Technical system when i use
    >  Business service?
    no
    > 4. How do I transport SWCVs from dev SLD to TEST SLD,
    > without Technical system and Business System?
    I don't know.
    > 5.Do i need to transport the SWCVs from dev SLD to
    > test SLD as it working fine without doing SLD
    > transport?
    >
    In my opinion you have to. But the best configuration is only one sld for whole landscape than you don't have to transport it.
    > Thankx
    > Moni
    <i>** Please reward points if found it useful **</i>

  • Where do I define the automatic posting of goods issue to Cost Center?

    Dear Experts,
    I found out that all the raw material consumed each time I do the confirmation of process order via CORK did not post to Cost Center.
    Where do I define the automatic posting to Cost Center for Goods issue for consumption?
    regards,
    Abraham

    Hi,
    I found out the default movement type has been predefined to 261 (GI for Order, in which it doesn't post to Cost Center).  I guess the standard system has a valid reason to set it as 261 instead of 201 (GI for cost center). 
    As far as I understand, the Process order will accumulate all the costs (direct cost - material, labour and machine hour and also indirect cost) during the confirmation (material is backflushed and fnished goods is auto-GR).  And at the end of the period, this process order will be settled its variance if there is (between the total cost credited - based on standard cost of the finished goods and actual total accumulated costs debited).
    So, my question is, by right should there be any CO posting being made to Cost Center for material consumption in the above process flow as I checked in the standard system, the material movement for raw material and finished goods have no Cost Center posting at all?
    regards,
    Abraham

  • Output device - printing in unix file - where do I define the UNIX path?

    Hi,
    We use an special Output Device to print spool requests directly in Unix. These Output Devices are defined as Local Unix File. When those spool requests are printed, a file is created in certain path in UNIX.
    The question is where this link is defined?, I dont see where in the Output Device (trn SPAD) is defined the path in UNIX.
    Thanks!
    Aaron

    Hi,
    Might be the unix path would have been defined in the SPAD only under the Access method of the output device, in the field Destination host.
    Regards,
    Aditya

Maybe you are looking for