Essbase studio export

I want to deploy a cube design from development to production and I am using the file -> export feature of studio.
when I export a cube, i just have the cube selected with "include associated essbase models with cube schemas" ticked.
when i import the file into our production instance it fails.
i looked at the export file and it seems to contain the deployment history from development, plus.
+ some of the dimension data we load
+ osme of the load errors we have had in the past.
There appears to be no way to delete the deployment history.
i do the same export again but with the "include associated essbase models with cube schemas" NOT ticked.
the export is successful and i can import successfully into the production instance.
the production and development instances are 11.1.2
strangely we had this feature working when we did our initial tests on studio, but somewhere something has gone astray
grateful if anyone could shine the light on this issue.
many thanks
jack

Have you read the section on exporting/importing in the studio admin doc as it should help answer your question - "Exporting and Importing the Essbase Studio Catalog Database" - http://download.oracle.com/docs/cd/E17236_01/epm.1112/est_user.pdf
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

How to Clear Deployment History in Essbase Studio 11.1.2

Hi All,
I was unable to export the entire catalog in Essbase Studio 11.1.2.So,I posted the issue with Oracle Support and got reply as follows
"found the failure for the export of entire catalog could be related to a large deployment history. In this case there are two options for 11.1.2.0.00 release
1. Try to increase memory setting but on Windows 32-bit platforms ensure it should be below the maximum setting of 2048 MB.
2. If it doesn't help, please try to clean-up deployment history."
Which setting I have to increase
(or)
How to clear the deployment history for a Cube Schema Model.Thanks in Advance
Regards,
SatyaB

increasing the memory have a read of section "Configuring Virtual Memory" - http://download.oracle.com/docs/cd/E17236_01/epm.1112/est_user.pdf
Cheers
John
http://john-goodwin.blogspot.com/

Essbase studio 11.1.2.1 problem

First of all hello to all and please please help. I'm in the on-site poc engagement where we successfully loaded customer's hierarchies using essbase studio but we cannot somehow make it working with loading data.
Few details:
fact table is very large, around 16 M records and is based on Oracle DB.
The message I'm getting after launching only load task says:
Cannot join following sets of tables: 1. [connection : \'pko'::'POC_A.KREDYTY']
2. [connection : \'pko'::'POC_A.DORADCA', connection : \'pko'::'POC_A.KAT_RYZYKA', connection : \'pko'::'POC_A.ORGANIZACJA', connection : \'pko'::'POC_A.OBSZAR', connection : \'pko'::'POC_A.TYP_KRED', connection : \'pko'::'POC_A.TYP_PROD', connection : \'pko'::'POC_A.KANAL', connection : \'pko'::'POC_A.TYP_RACH', connection : \'pko'::'POC_A.POC_PARMPF_AGR', connection : \'pko'::'POC_A.TERMIN', connection : \'pko'::'POC_A.LINIA', connection : \'pko'::'POC_A.PODMIOT', connection : \'pko'::'POC_A.SALDA', connection : \'pko'::'POC_A.TYP_OPROC', connection : \'pko'::'POC_A.DEPOZYTY', connection : \'pko'::'POC_A.WALUTA'].
I don't understand that as I did created joins between fact table and dimension tables.
In the log file I found following 2 sections:
Section 1
[2012-05-10T20:33:59.194-05:00] [hyperion] [NOTIFICATION] [ESSSTD-129007] [com.hyperion.cp.datasources.export.essbase] [host: demodrive] [nwaddr: 192.100.100.100] [tid: 37] [userId: demoadmin-2] [ecid: disabled,0] [SRC_CLASS: com.hyperion.cp.datasources.export.essbase.EssbaseMain] [SRC_METHOD: createEssbaseCube] Beginning creation of outline in database `essbase://bidemo:1423/?cluster=false#application=pko;database=pko`.
[2012-05-10T20:34:01.473-05:00] [hyperion] [NOTIFICATION] [ESSSTD-129037] [com.hyperion.cp.datasources.export.essbase] [host: demodrive] [nwaddr: 192.100.100.100] [tid: 37] [userId: demoadmin-2] [ecid: disabled,0] [SRC_CLASS: com.hyperion.cp.datasources.export.essbase.EssbaseSigner] [SRC_METHOD: sign] Sign on Essbase `bidemo:1423` by CSS token successful.
[2012-05-10T20:34:01.477-05:00] [EPMOHPS] [ERROR] [] [oracle.EPMOHPS] [host: demodrive] [nwaddr: 192.100.100.100] [tid: 37] [userId: demoadmin-2] [ecid: disabled,0] [SRC_CLASS: com.hyperion.dsf.server.framework.BaseLogger] [SRC_METHOD: writeException] Cannot create olap application. Essbase Error(1051031): Application pko already exists[[
com.essbase.api.base.EssException: Cannot create olap application. Essbase Error(1051031): Application pko already exists
Section 1
[2012-05-10T20:34:01.485-05:00] [hyperion] [NOTIFICATION] [ESSSTD-129041] [com.hyperion.cp.datasources.export.essbase] [host: demodrive] [nwaddr: 192.100.100.100] [tid: 37] [userId: demoadmin-2] [ecid: disabled,0] [SRC_CLASS: com.hyperion.cp.datasources.export.essbase.EssbaseMain] [SRC_METHOD: createEssbaseCube] Beginning data load to database `essbase://bidemo:1423/?cluster=false.pko.pko`.
[2012-05-10T20:34:01.507-05:00] [hyperion] [ERROR] [ESSSTD-127004] [com.hyperion.cp.datasources.export.essbase.util] [host: demodrive] [nwaddr: 192.100.100.100] [tid: 37] [userId: demoadmin-2] [ecid: disabled,0] [SRC_CLASS: com.hyperion.cp.datasources.export.essbase.util.EssbaseExportSupport$EssbaseExport] [SRC_METHOD: invoke] Unexpected exception in EssbaseExport prevented cube from being deployed.[[
com.hyperion.cp.server.UncheckedException: Cannot join following sets of tables:
1. [connection : \'pko'::'POC_A.KREDYTY']
2. [connection : \'pko'::'POC_A.CZAS', connection : \'pko'::'POC_A.DORADCA', connection : \'pko'::'POC_A.KAT_RYZYKA', connection : \'pko'::'POC_A.ORGANIZACJA', connection : \'pko'::'POC_A.OBSZAR', connection : \'pko'::'POC_A.TYP_KRED', connection : \'pko'::'POC_A.TYP_PROD', connection : \'pko'::'POC_A.KANAL', connection : \'pko'::'POC_A.TYP_RACH', connection : \'pko'::'POC_A.POC_PARMPF_AGR', connection : \'pko'::'POC_A.TERMIN', connection : \'pko'::'POC_A.LINIA', connection : \'pko'::'POC_A.PODMIOT', connection : \'pko'::'POC_A.SALDA', connection : \'pko'::'POC_A.TYP_OPROC', connection : \'pko'::'POC_A.DEPOZYTY', connection : \'pko'::'POC_A.WALUTA']
If I understand it correctly essbase studio doesn't allow to deploy app that is already there but the question is why it want to deploy when I select only load data task ?
Also, can somebody tell me why I cannot setup custom sql ?
I'd really appreciate your help as we can win million + deal
Thanks!!!!

I hear that there is a really good book available now on Studio (http://www.amazon.com/Look-Smarter-Than-Essbase-Studio/dp/1458362434/ref=sr_1_1?ie=UTF8&qid=1336684325&sr=8-1), you may want to see if that helps. Hopefully the very reasonable cost can be viewed as a good investment for that million + deal.

Essbase Studio Error(1021001): Failed to Establish Connection With SQL Data

Hi.
I have trying to deploy a cube with Essbase Studio but I get the error: "*Error(1021001): Failed to Establish Connection With SQL Database Server*"
My environment is Linux 5, Oracle 11g and EPM 11.1.1.2. Oracle database and Essbase was installed with diferent users. In the .bash_profile of hypadmin user (that install Essbase) I have set the following variables
ORACLE_BASE=/u01/app/oracledb/product/11.1.0
ORACLE_HOME=$ORACLE_BASE/db_1
LD_LIBRARY_PATH=/usr/X11R6/lib:$ORACLE_HOME/lib:$LD_LIBRARY_PATH
ORACLE_HOSTNAME=devbi.sigfe2
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/jdk/bin:$ORACLE_HOME/bin:/sbin:$ORACLE_HOME/opmn/bin:$PATH
ORACLE_SID=orcl
JAVA_HOME=/u01/app/installfiles/jdk1.5.0_19
In my pc (windows xp) I can open Essbase Studio console, do the connection to Oracle database, get tables and create minischema, mesures and hierarchies (I can see the preview of hierarchies). Also I can create cubes with EAS and can connect with MAXSHELL to essbase.
When I try to deploy the cube from Essbaes Studio y get the error "Error(1021001): Failed to Establish Connection With SQL Database Server".
The Essbase Studio Log File say:
+12:40:16 07/24/09 (admin-1) INFO Start creating outline in database "5.4.0.41:1423.POC_ESS.POC_ESS1"...+
+12:40:16 07/24/09 (admin-1) FINA Sign on Essbase by CSS token "5.4.0.41:1423" successfully...+
+12:40:16 07/24/09 (admin-1) INFO Start building dimension "DM_CIUDADES" ...+
+12:40:16 07/24/09 (admin-1) MÁS FINA Start creating rule file ...+
+12:40:16 07/24/09 (admin-1) INFO SQL statement has been created and put into rule file "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+
+12:40:16 07/24/09 (admin-1) INFO The query is "SELECT (CONCAT('reg_',CAST(cp_105."ID_REGIONPADRE" AS VARCHAR2(1000)))) as "REGION_PADRE", (CONCAT('reg_',CAST(cp_105."ID_REGION" AS VARCHAR2(1000)))) as "REGION_HIJO", cp_105."DE_REGION" as "REGION_HIJO.Default" FROM "POC"."DM_REGIONES_ESS3" cp_105 ORDER BY cp_105."DE_NIVEL" ASC, cp_105."ID_REGIONPADRE" ASC, cp_105."ID_REGION" ASC"+
+12:40:16 07/24/09 (admin-1) INFO Rule file has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+
+12:40:16 07/24/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file.+
+12:40:16 07/24/09 (admin-1) ADVERTENCIA (1021001): Error al establecer conexión con el servidor de bases de datos SQL. Consulte el registro para obtener más información.+
+12:40:16 07/24/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException+
+12:40:16 07/24/09 (admin-1) GRAVE Unexpected exception in EssbaseExport prevented cube from being deployed+
-------------- Exception --------------
com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: Failed to deploy Essbase cube
Thanks in advance to all that have any idea to help me to solve this issue.
A.S.

Hi,
If you type database SID in lowercase, try to reenter iot in uppercase. Strange, but I and my colleagues encounter this behaviour many times.

Essbase Studio: Failed to deploy Essbase cube

Hi
I have started working with Essbase studio sometime back and I am able to deploy BSO cube with success using the TBCSample Database which comes along with Essbase. Now I wanted to deploy ASO cube, as no sample database is available I thought to create one, I extracted ASOSamp using ODI to CSV files. Then I bulk inserted the csv extracts into MSSQL 2003 server which created 11 tables (Age, Geography, IncomeLevel, Measures, PaymentType, Product, Stores, Time TransactionType, Year). The above mentioned table does not have any keys(Primary, Foreign) as it is an Essbase export.
I then successful created ASO Cube Schema using the newly created sample database in MSSQL, validated cube schema without any errors.
Essbase Property Setting:
Measures Hierarchy is tagged as Dynamic Compression at dimension level
Time, Product and Year Hierarchy is tagged as Multiple Hierarchies Enabled, Year does not have multiple hierarchies but it has formulas for Variance and Variance % member. Is there a way to tag Year as Dynamic hierarchy?
But when I try to deploy the cube to Essbase I receive following errors:
Failed to deploy Essbase cube
Caused By: Cannot end incremental build. Essbase Error(1060053): Outline has errors
\\Record #1 - Member name (Time) already used
+ S Time + S
\\Record #6 - Member name (1st Half) already used
MTD + S 1st Half + S
\\Record #7 - Member name (2nd Half) already used
MTD + S 2nd Half + S
\\Record #21 - Member name (Qtr1) already used
Qtr1 + S Feb + S
\\Record #22 - Member name (Qtr1) already used
Qtr1 + S Jan + S
\\Record #23 - Member name (Qtr1) already used
Qtr1 + S Mar + S
\\Record #24 - Member name (Qtr2) already used
Qtr2 + S Apr + S
\\Record #25 - Member name (Qtr2) already used
Qtr2 + S Jun + S
\\Record #26 - Member name (Qtr2) already used
Qtr2 + S May + S
\\Record #27 - Member name (Qtr3) already used
Qtr3 + S Aug + S
\\Record #28 - Member name (Qtr3) already used
Qtr3 + S Jul + S
\\Record #29 - Member name (Qtr3) already used
Qtr3 + S Sep + S
\\Record #30 - Member name (Qtr4) already used
Qtr4 + S Dec + S
\\Record #31 - Member name (Qtr4) already used
Qtr4 + S Nov + S
\\Record #32 - Member name (Qtr4) already used
Qtr4 + S Oct + S
\\Record #33 - Member name (Time) already used
Time + S MTD + S
\\Record #34 - Member name (Time) already used
Time ~ S QTD ~ S
\\Record #35 - Member name (Time) already used
Time ~ S YTD ~ S
\\Record #9 - Error adding Attribute to member QTD(Jan) (3320)
\\Record #9 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD + S QTD(Jan) + S [Jan]
\\Record #10 - Error adding Attribute to member QTD(Apr) (3320)
\\Record #10 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Apr) ~ S [Apr]
\\Record #11 - Error adding Attribute to member QTD(Aug) (3320)
\\Record #11 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Aug) ~ S [Jul]+[Aug]
\\Record #12 - Error adding Attribute to member QTD(Dec) (3320)
\\Record #12 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Dec) ~ S [Oct]+[Nov]+[Dec]
\\Record #13 - Error adding Attribute to member QTD(Feb) (3320)
\\Record #13 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Feb) ~ S [Jan]+[Feb]
\\Record #14 - Error adding Attribute to member QTD(Jul) (3320)
\\Record #14 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Jul) ~ S [Jul]
\\Record #15 - Error adding Attribute to member QTD(Jun) (3320)
\\Record #15 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Jun) ~ S [Apr]+[May]+[Jun]
\\Record #16 - Error adding Attribute to member QTD(Mar) (3320)
\\Record #16 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Mar) ~ S [Jan]+[Feb]+[Mar]
\\Record #17 - Error adding Attribute to member QTD(May) (3320)
\\Record #17 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(May) ~ S [Apr]+[May]
\\Record #18 - Error adding Attribute to member QTD(Nov) (3320)
\\Record #18 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Nov) ~ S [Oct]+[Nov]
\\Record #19 - Error adding Attribute to member QTD(Oct) (3320)
\\Record #19 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Oct) ~ S [Oct]
\\Record #20 - Error adding Attribute to member QTD(Sep) (3320)
\\Record #20 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
QTD ~ S QTD(Sep) ~ S [Jul]+[Aug]+[Sep]
\\Record #36 - Error adding Attribute to member YTD(Jan) (3320)
\\Record #36 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD + S YTD(Jan) + S [Jan]
\\Record #37 - Error adding Attribute to member YTD(Apr) (3320)
\\Record #37 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Apr) ~ S [Qtr1]+[Apr]
\\Record #38 - Error adding Attribute to member YTD(Aug) (3320)
\\Record #38 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Aug) ~ S [1st Half]+[Jul]+[Aug]
\\Record #39 - Error adding Attribute to member YTD(Dec) (3320)
\\Record #39 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Dec) ~ S [1st Half]+[Qtr3]+[Qtr4]
\\Record #40 - Error adding Attribute to member YTD(Feb) (3320)
\\Record #40 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Feb) ~ S [Jan]+[Feb]
\\Record #41 - Error adding Attribute to member YTD(Jul) (3320)
\\Record #41 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Jul) ~ S [1st Half]+[Jul]
\\Record #42 - Error adding Attribute to member YTD(Jun) (3320)
\\Record #42 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Jun) ~ S [1st Half]
\\Record #43 - Error adding Attribute to member YTD(Mar) (3320)
\\Record #43 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Mar) ~ S [Qtr1]
\\Record #44 - Error adding Attribute to member YTD(May) (3320)
\\Record #44 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(May) ~ S [Qtr1]+[Apr]+[May]
\\Record #45 - Error adding Attribute to member YTD(Nov) (3320)
\\Record #45 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Nov) ~ S [1st Half]+[Qtr3]+[Oct]+[Nov]
\\Record #46 - Error adding Attribute to member YTD(Oct) (3320)
\\Record #46 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Oct) ~ S [1st Half]+[Qtr3]+[Oct]
\\Record #47 - Error adding Attribute to member YTD(Sep) (3320)
\\Record #47 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
YTD ~ S YTD(Sep) ~ S [1st Half]+[Qtr3]
\\Record #2 - Incorrect Dimension [Year] For Member [ParentName] (3308)
ParentName Consolidation DataStorage MemberName Consolidation DataStorage Formula
\\Record #1 - Member name (Promotions) already used
S Promotions S
\\Record #2 - Incorrect Dimension [Promotions] For Member [ParentName] (3308)
ParentName DataStorage MemberName DataStorage
\\Record #3 - Member name (Promotions) already used
Promotions S Coupon S
\\Record #4 - Member name (Promotions) already used
Promotions S Newspaper Ad S
\\Record #5 - Member name (Promotions) already used
Promotions S No Promotion S
\\Record #6 - Member name (Promotions) already used
Promotions S Temporary Price Reduction S
\\Record #7 - Member name (Promotions) already used
Promotions S Year End Sale S
\\Record #2 - Incorrect Dimension [Payment Type] For Member [ParentName] (3308)
ParentName DataStorage MemberName DataStorage
\\Record #2 - Incorrect Dimension [Transation Type] For Member [ParentName] (3308)
ParentName DataStorage MemberName DataStorage
\\Record #22 - Member name (Home Entertainment) already used
Home Entertainment + S Home Audio/Video + S
\\Record #23 - Member name (Home Entertainment) already used
Home Entertainment + S Televisions + S
\\Record #24 - Member name (Other) already used
Other + S Computers and Peripherals + S
\\Record #25 - Incorrect Dimension [Product] For Member [ParentName] (3308)
ParentName Consolidation DataStorage MemberName Consolidation DataStorage
\\Record #26 - Member name (Personal Electronics) already used
Personal Electronics + S Digital Cameras/Camcorders + S
\\Record #27 - Member name (Personal Electronics) already used
Personal Electronics + S Handhelds/PDAs + S
\\Record #28 - Member name (Personal Electronics) already used
Personal Electronics + S Portable Audio + S
\\Record #31 - Member name (All Merchandise) already used
Products + S All Merchandise + S
\\Record #32 - Member name (High End Merchandise) already used
Products ~ S High End Merchandise ~ S
\\Record #33 - Member name (Systems) already used
Systems + S Desktops + S
\\Record #34 - Member name (Systems) already used
Systems + S Notebooks + S
\\Record #18 - Error adding Attribute to member Digital Recorders (3320)
Home Audio/Video + S Digital Recorders + S
\\Record #36 - Error adding Attribute to member Flat Panel (3320)
Televisions + S Flat Panel + S
\\Record #37 - Error adding Attribute to member HDTV (3320)
Televisions + S HDTV + S
\\Record #8 - Incorrect Dimension [Income Level] For Member [ParentName] (3308)
ParentName DataStorage MemberName DataStorage
\\Record #1 - Member name (Geography) already used
S Geography S
\\Record #2 - Error adding member 27425 (3317)
\\Record #2 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
A M F GREENSBORO - NC S 27425 S 336
\\Record #3 - Error adding member 36310 (3317)
\\Record #3 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABBEVILLE - AL S 36310 S 334
\\Record #4 - Error adding member 29620 (3317)
\\Record #4 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABBEVILLE - SC S 29620 S 864
\\Record #5 - Error adding member 67510 (3317)
\\Record #5 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABBYVILLE - KS S 67510 S 316
\\Record #6 - Error adding member 58001 (3317)
\\Record #6 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABERCROMBIE - ND S 58001 S 701
\\Record #7 - Error adding member 42201 (3317)
\\Record #7 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABERDEEN - KY S 42201 S 502
\\Record #8 - Error adding member 21001 (3317)
\\Record #8 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABERDEEN - MD S 21001 S 410
\\Record #9 - Error adding member 39730 (3317)
\\Record #9 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABERDEEN - MS S 39730 S 601
\\Record #10 - Error adding member 28315 (3317)
\\Record #10 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABERDEEN - NC S 28315 S 910
\\Record #11 - Error adding member 79311 (3317)
\\Record #11 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABERNATHY - TX S 79311 S 806
\\Record #12 - Error adding member 79601 (3317)
\\Record #12 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABILENE - TX S 79601 S 915
\\Record #13 - Error adding member 79608 (3317)
\\Record #13 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
ABILENE - TX S 79608 S 915
\\Record #14 - Error adding member 79698 (3317)
\\Record #14 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
Are these errors due to data source, if yes what could be possible work around?
Is there any problem with Essbase properties which I have set if so then when I validate cube schema why I dn't get any errors?
Please help me, I am stuck here not able to deploy ASO Cube.
Thanks in advance

Hii
I have the same problem , you have.
did you manage to solve it ??
Thanks in advance

Essbase Studio - Import Catalog using an automatic process

Hello,
I'd like to make the process of importing Essbase Studio catalog more automatic in the customer environment. Instead of having to open Essbase Studio application every time I want to deploy a new version of the catalog ( either full or partial ), is there any way to export/import the catalog using a unix shell script or DOS command ?
Thanks in advance
Victor

I think the options will be quite limited for automating migrations until 11.1.2.3 where LCM supports Studio.
Cheers
John
http://john-goodwin.blogspot.com/

Essbase studio application migration

Hi,
We need to migrate Essbase studio model in 11.1.1.3. When I tried tofind options I cannot find export/import options. Also right clicked on the the folder and not able to see any options for export, import, copy etc.
How do we migrate this?
Thank you
Raj

Hi,
Thanks for the reply. Your reply helped me to get some insgits. Then how the incremental migration happens. Does it mean we need to update manually? If a new model is created for new application and you know that schema copy is not possible. Does it mean that, we need to migrate the new model by manually creating all artifacts of Essbase studio?
Thank you
Raj

Import Hierarchies into Essbase Studio

Hi all,
I am running Essbase Studio 11.1.1.3.00.I have exported hierarchies into text files from an EAS database. I want to use the files to create the hierarchies in Studio. Is this possible and how can I do it?
Thanks in advance.

Sorry I slightly misunderstood. If you are talking about an export, then it will not give you what you need. You would have to get the hierarchies from your Essbase model. Options for doing that would be
ODI,
the outline extractor available at appliedOlap.com (there is also one from Star Analytics that I don't remember the name of)
or from the API.
Each of the dimension extracts would have to be in a format acceptable to Studio like Parent child. You would have to include all the properties of each member to get it to build properly. Then you could load your data (either from within studio or with just a load rule.

Essbase Studio Cube Migration

Hi All,
We have a requirement where we want to migrate our Essbase Studio Cube from one environment to another. We want to migrate the entire catalog/models/cube/data.
Can anyone mention the correct sequence to follow.
(Version: 11.1.1.3)
I was trying to search this in forum; I found that the cubes can be migrated via LCM while the catalog migration is difficult.
Also please verify my understanding:
1. LCM cannot be used for Studio v11.1.1.3.
2. The catalog export/import option is not available for v11.1.1.3. It was introduced for v11.1.2.
Any response will be highly appreciated.
Thanks.

LCM still does not support studio in 11.1.2.2
11.1.2.0 Studio New Features - "In this release, you can replicate the Essbase Studio catalog database among different machines for various administrative purposes, such as making catalog backups, restoring the catalog, and moving the catalog from one machine to another. Essbase Studio now provides an option to export the catalog into an XML file. This file can then be imported to a new location or a different machine to recreate the catalog. You can selectively copy some catalog objects, export to an XML file, and then recreate these objects in a new location or on a different machine."
Cheers
John
http://john-goodwin.blogspot.com/

Unable to load data into Essbase cube using Essbase Studio

Hi
We are creating an essbase cube using Essbase Studio using flat files as data sources.
We have taken different hierarchies into different flat files and created one fact file having dimension intersection along with data.
We are able to create the cube and the hierarchy but not able to load any data.
We are getting the following error
Failed to deploy Essbase cube.
Caused by: Unable to perform dataload from more than one flat file.
Could anyone please help on this?

Oh this was killing me, so I did this test in 11.1.1.3:
1) Excel 2007 format -- no go, Essbase didn't see it
2) Excel 2003 format, three sheets -- only the first sheet was read into an empty rule
3) Excel 2003 format, one sheet -- the first sheet was read into an empty rule
4) Excel 95 format, one sheet -- the first sheet was read into an empty rule
The lesson?
1) Excel 2007/2010 sheets don't work (no surprise there as the .xlsx format isn't supported).
2) Excel 2003 and lower (hey, if you have Excel 4, I'll bet that works as well) work, but only the first sheet is recognized.
Regards,
Cameron Lackpour

Error in access with Essbase Studio Console

We get error to connect with Essbase Studio Console.
"children for Root. Reason: Unknown package name 'drillthrough'.Line = 1."
It is a new installation.
EPM 11.1.2.2

Hi,
During the installation of Essbase Studio only, ess_es_server.jar and ess_japi.jar are missing. If you install both Essbase and Studio, they are not missing.
This is due to unpublished bug 14232814 - DURING THE INSTALLATION ONLY STUDIO SOME .JAR FILES NOT INSTALLED
Try the following:
Stop Essbase Studio
copy files into EPMSystem11R1\common\EssbaseJavaAPI\11.1.2.0\lib
ess_es_server.jar
ess_japi.jar
If folder does not exist create it.
1. Stop essbase Studio.
2. Drop tables from relational database
3. Recreate tables.
4. Start Essbase Studio.
Scripts for dropping & recreating catalog located under
oracle\middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\database\common\db_name
Hope it helps....
KosuruS
PS: If the above information is helpful, mark it :)

Essbase Studio Error in 11.1.2.2

Hi Everyone,
I have installed hyperion 11.1.2.2 in windows 2008 Server and configured sucessfully however when i click on essbase studio console i am getting the below error.
A javaruntime environment (JRE) or java development kit (JDK) must be available. No Virtual Machine was found after searching the following locations.
C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\Essbasestudio\console\jre\bin\javaw.exe
javaw.exe is current path.
i don't see the javaw.exe file in the above path. Kindly help me in this.
Regards,
AS

If you edit
<MIDDLEWARE_HOME>\EPMSystem11R1\products\Essbase\EssbaseStudio\Console\startStudio.bat
then you will probably see "set JAVA_HOME=..." is pointing to an incorrect location
As the Studio console is 32bit then it needs to point to a 32bit JRE e.g.
set JAVA_HOME="E:\Oracle\Middleware\EPMSystem11R1\common\JRE"
Cheers
John
http://john-goodwin.blogspot.com/

ESSBase studio server is not running

Dear All,
When I run ESSBase studio server, I get below error. Kindly advice me on this.
C:\Hyperion\products\Essbase\EssbaseStudio\Server>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
Log file location is:
C:\Hyperion\logs\esbstudio\server.log
18:49:34 12/29/09 INFO Starting up
18:49:34 12/29/09 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009
18:50:41 12/29/09 (system) WARNING Failed to load driver for sap
18:50:41 12/29/09 (system) SEVERE Cannot load Teradata connector
18:50:41 12/29/09 (system) WARNING Failed to load driver for teradata
18:50:41 12/29/09 (system) WARNING Failed to load driver for mysql
18:50:41 12/29/09 (system) WARNING Failed to load driver for netezza
18:50:41 12/29/09 (system) SEVERE Cannot initialize catalog storage. Make sure that server.properties has correct information
-------------- Exception --------------
com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Cannot initialize data storage engine
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:53)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:97)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
Caused by: com.hyperion.cp.datasources.exploration.sql.SqlExplorerException: Sql exploration exception
at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.performExploration(SqlExplorer.java:237)
at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.explore(SqlExplorer.java:143)
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:49)
... 11 more
Caused by: com.hyperion.cp.driver.util.DriverException: Data Driver for url '%s' is absent or failed to initialize. Please see server start
p log for more information.
at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:102)
at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)
at com.hyperion.cp.driver.DriverEngine.executeStringQuery(DriverEngine.java:131)
at com.hyperion.cp.datasources.exploration.Explorer.executeStringQuery(Explorer.java:138)
at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.getCatalogs(SqlExplorer.java:456)
at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.exploreSources(SqlExplorer.java:261)
at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.performExploration(SqlExplorer.java:195)
... 13 more
Thanks in advance,
Best,
Veeranna Ronad.

Hi,
The content of the server.properties is given below. Even after making suggested changes, the server is not running.
I am running the server from the path "C:\Hyperion\products\Essbase\EssbaseStudio\Server\stopServer.bat".
server.properties
catalog.autoinit=true
catalog.username=prototype_int
transport.port=5300
catalog.url=oracle\://10.1.126.248\:1521/ORCL
catalog.password=T1JBQ0xF
catalog.db=prototype_int
server.hss.bpmApplication=BPM\:73317
Below is the error.
C:\Hyperion\products\Essbase\EssbaseStudio\Server>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
Log file location is:
C:\Hyperion\logs\esbstudio\server.log
17:56:32 01/15/10 INFO Starting up
17:56:32 01/15/10 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009
javax.crypto.IllegalBlockSizeException: Input length must be multiple of 8 when decrypting with padded cipher
at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
at com.sun.crypto.provider.DESCipher.engineDoFinal(DashoA12275)
at javax.crypto.Cipher.doFinal(DashoA12275)
at com.hyperion.cis.config.persistent.utils.Encrypter.decrypt(Encrypter.java:103)
at com.hyperion.cis.config.persistent.utils.Encrypter.decryptString(Encrypter.java:130)
at com.hyperion.cp.util.PropertyManager.getProperty(PropertyManager.java:143)
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:33)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:97)
at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
17:56:38 01/15/10 (system) WARNING Failed to load driver for sap
17:56:39 01/15/10 (system) WARNING Failed to load driver for mysql
17:56:39 01/15/10 (system) WARNING Failed to load driver for netezza
17:56:40 01/15/10 (system) SEVERE Cannot establish connection to Oracle server
javax.crypto.IllegalBlockSizeException: Input length must be multiple of 8 when decrypting with padded cipher
at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
at com.sun.crypto.provider.DESCipher.engineDoFinal(DashoA12275)
at javax.crypto.Cipher.doFinal(DashoA12275)
at com.hyperion.cis.config.persistent.utils.Encrypter.decrypt(Encrypter.java:103)
at com.hyperion.cis.config.persistent.utils.Encrypter.decryptString(Encrypter.java:130)
at com.hyperion.cp.util.PropertyManager.getProperty(PropertyManager.java:143)
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:33)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:97)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
17:56:40 01/15/10 (system) SEVERE Cannot establish connection to Oracle server
17:56:40 01/15/10 (system) SEVERE Cannot initialize catalog storage. Make sure that server.properties has correct information
-------------- Exception --------------
com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog.CatalogInitializationException.StorageInitializationFailure
at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:155)
at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:98)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:149)
... 12 more
Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: No table PROTOTYPE_INT.CP_NONE_TRANSACTIONS found
at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:193)
at com.hyperion.cp.catalog.storage.StorageEngine.<init>(StorageEngine.java:87)
at com.hyperion.cp.catalog.storage.SQLStorageEngine.<init>(SQLStorageEngine.java:20)
... 17 more
Thanks in advance,
Best,
Veeranna Ronad.
Edited by: Ronad on Jan 15, 2010 4:02 PM
Edited by: Ronad on Jan 15, 2010 5:58 PM

Error while deploying Essbase studio

Hi All,
I need some help with the studio deployment error. I have created a bat script to run Maxl which will deploy essbase studio, then create some user defined measures using rules files and then calculation.
When I ran the batch script first time, it was successful. Now its giving me the following error :
BPM Connect Status: Success
Failed to deploy Essbase cube.
Caused by: Cannot begin incremental build. Essbase Error(1007151): Wrong incremental dimension build sequence
BPM maxl deployment ...failure.
Please help
Thanks

There is no issue for BSO cubes. Internally the BSO outlines are different from ASO cubes and this restriction does not appear in them. For ASO cubes, the problem is caused by deleting and readding dimensions. If you do incremental builds on dimensions, you will not have the 255 dimension issue, but the ASO outline will still grow. So the compaction utility in EsscmdQ is still valid for that.

Error in deploying the cubes in Essbase Studio

I am getting below error when I try to depoly ASO cubes in Essbase Studio.
***Failed to deploy Essbase cube***
***Caused By: Error when retrieving data from SQL source***
***Caused By: Error when retrieving data from SQL source***
***Caused By: [Hyperion][DB2 JDBC Driver]SQLDIAGGRP was specified and not null.***
I also checked the error log generated in the applications asking to increase the NETDELAY and NETRETRY COUNTS in ESSBASE.CFG, the config file. I made those changes, restarted the services and deployed again but in vain.

There have been a number of MaxL bugs with encryption that produce 'Parse error near...' messages. If you login to Oracle Support and search the Knowledge Base on 'Parse error near' you will find them. I can't see anything specifically relating to 11.1.2.1 or a known defect in the release notes... ...I'd get a support ticket raised, if you haven't already.
You don't mention platform, but I've also run into a bug running 'deploy' in 11.1.2.1 on a 64-bit Windows environment and there was a Unix bug too, but they both caused crashes so probably aren't your problem.

Essbase studio export

Similar Messages

Maybe you are looking for