Esso Agents 11.1.1.2.0 with Legacy Logon manager and PG

Hi
I have many applications that fail on single sign-on.Although the eso services are started I have many pcs having to be re-installed because of esso not working. I have tried the troubleshooting methods on repair and un/re-installation of the esso software with no success
The components I have currently installed are:
1. Esso Server
Logon Manager Console 10.1.410 (unpatched)
Provisioning Gateway server 10.1.410 (unpatched)
Microsoft ADAM repository on windows
2. Windows XP esso Client
Logon Manager Agent 10.1.410 (unpatched)
Provisioning Gateway Client 10.1.410 (unpatched)
My question is can I upgrade the clients to the latest version 11.1.1.2.0 now while having the Esso server version software remain the same. The upgrade of the Esso server will happen only during the latter half of the year.
Will the esso clients still continue to work connecting to the legacy software on the esso server.
We have a few sites that have been upgraded fully ( server and clients) to the 11.1.1.2.0 version and esso has been stable there ever since .
Thanks
Minesh

This is an SSL handshake problem of Websphere - has nothing to do with AM.
Websphere�s JDK does not trust the Signer / Cert of AM�s deployment container.
Either configure a truststore (or use an existing webshpere truststore) where you import the Cert of the Signing CA of your AM DC�s cert.
Other option - import the mentioned cert in cacert file of IBM JDK - but be aware that this might get lost when applying an Websphere fixpack/refreshpack.
BTW what have you configured for server.port,server.host and server.protocol in your AMConfig.properties?
If you have not changed that settings agent will use the port/protocol specified to communicate with AM.
-Bernhard

Similar Messages

Installing WorkFlow with ARES, Form Manager and Forms

Hi All,
I'm having issues when trying to install WorkFlow with ARES, Form Manager and Forms.
I've followed these steps:
1. Installed Forms v. 7.1
2. Installed Form Manager v. 7.0.1
3. Installed ARES v. 7.0 (using a trust directory with a keyfile, etc.)
4. Installed Workflow v. 7.0.1 with Turnkey option checked.
5. Ran configuration manager.
The progress gets to 12% then displays the error code "LCMerror101" with the message "Livecycle module pdfagent-client could not be copied to working directory".
I don't know what this error means, can someone help me?? I know the issue isn't related to disk space (20+ gigs free) and I'm using the administrator account to install. Any suggestions or tidbits of info would be much appreciated.
Thanks,
Stone.

Here's a copy of the log file. lcm.log
[2006-02-21 14:11:34,437], Runnable bean context: My Action (bean23), com.adobe.idp.install.lcm.LCMProcessManager, INFO , Copying component to working dir: com.adobe.idp.install.lcm.config.Component@857327[monitorui,../components/monitorui,./wor king/monitorui]
[2006-02-21 14:11:36,750], Runnable bean context: My Action (bean23), com.adobe.idp.install.lcm.LCMProcessManager, INFO , Copying component to working dir: com.adobe.idp.install.lcm.config.Component@14b2db7[xmlform,../components/xmlform,./workin g/xmlform]
[2006-02-21 14:11:38,718], Runnable bean context: My Action (bean23), com.adobe.idp.install.lcm.LCMProcessManager, INFO , Copying component to working dir: com.adobe.idp.install.lcm.config.Component@a65760[fontmanager,../components/fontmanager,. /working/fontmanager]
[2006-02-21 14:11:48,312], Runnable bean context: My Action (bean23), com.adobe.idp.install.lcm.LCMProcessManager, INFO , Copying component to working dir: com.adobe.idp.install.lcm.config.Component@1e140bf[registry,../components/registry,./work ing/registry]
[2006-02-21 14:12:30,593], Runnable bean context: My Action (bean23), com.adobe.idp.install.lcm.LCMProcessManager, INFO , Copying component to working dir: com.adobe.idp.install.lcm.config.Component@161bfa3[pof,../components/pof,./working/pof]
[2006-02-21 14:12:32,390], Runnable bean context: My Action (bean23), com.adobe.idp.install.lcm.LCMProcessManager, INFO , Copying component to working dir: com.adobe.idp.install.lcm.config.Component@6c9220[workflow,../components/workflow,./worki ng/workflow]
[2006-02-21 14:12:35,515], Runnable bean context: My Action (bean23), com.adobe.idp.install.lcm.LCMProcessManager, INFO , Copying component to working dir: com.adobe.idp.install.lcm.config.Component@1ed7524[fm,../components/formmanager,./working /fm]
[2006-02-21 14:12:39,921], Runnable bean context: My Action (bean23), com.adobe.idp.install.lcm.LCMProcessManager, INFO , Copying component to working dir: com.adobe.idp.install.lcm.config.Component@a5c9f1[pdfagent-client,../components/pdfagent- client,./working/pdfagent-client]
[2006-02-21 14:12:39,921], Runnable bean context: My Action (bean23), com.adobe.idp.install.lcm.LCMProcessManager, ERROR, Could not copy components
com.adobe.idp.install.lcm.LCMException: Could not copy components
at com.adobe.idp.install.lcm.LCMProcessManager.copyComponentsToWorkingDirectory(LCMProcessMa nager.java:463)
at MyAction.execute(MyAction.java:165)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Caused by: com.adobe.idp.install.lcm.LCMException: Illegal state found: File does not exist
at com.adobe.idp.install.lcm.LCMProcessManager.copyDirOrFile(LCMProcessManager.java:554)
at com.adobe.idp.install.lcm.LCMProcessManager.copyDirOrFile(LCMProcessManager.java:508)
at com.adobe.idp.install.lcm.LCMProcessManager.copyComponentsToWorkingDirectory(LCMProcessMa nager.java:459)
... 2 more
[2006-02-21 14:12:40,015], Runnable bean context: My Action (bean23), MyAction, ERROR, LCMerror101{pdfagent-client}
com.adobe.idp.install.lcm.LCMException: Could not copy components
at com.adobe.idp.install.lcm.LCMProcessManager.copyComponentsToWorkingDirectory(LCMProcessMa nager.java:463)
at MyAction.execute(MyAction.java:165)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Caused by: com.adobe.idp.install.lcm.LCMException: Illegal state found: File does not exist
at com.adobe.idp.install.lcm.LCMProcessManager.copyDirOrFile(LCMProcessManager.java:554)
at com.adobe.idp.install.lcm.LCMProcessManager.copyDirOrFile(LCMProcessManager.java:508)
at com.adobe.idp.install.lcm.LCMProcessManager.copyComponentsToWorkingDirectory(LCMProcessMa nager.java:459)
... 2 more
[2006-02-21 14:12:40,031], Runnable bean context: My Action (bean23), MyAction, ERROR, ErrorCode: LCMerror101, ErrorStr: Livecycle module pdfagent-client could not be copied to working directory.

Transfer it to another PC (with ADOBE DOWNLOAD MANAGER), and continue download from it ?

When I download a file and stops at the half, may by
anyway(how?) transfer it to another PC (with ADOBE DOWNLOAD MANAGER
installed), and continue download from that PC ?

No. You must start and finish the download from the same PC.
If your connection speed is not adequate, I would recommend going
back to Adobe and asking for media to be shipped out.

Problem with Gourmet Recipe Manager and Python

Hi everyone.
I am using Arch with openbox. I've installed gourmet from the repository, but unfortunately it doesn't work. Python is installed, too. When I start gourmet I get a lot of error messages:
[mario@krynn ~]$ gourmet
** Message: pygobject_register_sinkfunc is deprecated (GtkWindow)
** Message: pygobject_register_sinkfunc is deprecated (GtkInvisible)
** Message: pygobject_register_sinkfunc is deprecated (GtkObject)
WARNING: Plugin module import failed
PATH: ['/usr/bin', '/usr/lib/python26.zip', '/usr/lib/python2.6', '/usr/lib/python2.6/plat-linux2', '/usr/lib/python2.6/lib-tk', '/usr/lib/python2.6/lib-old', '/usr/lib/python2.6/lib-dynload', '/usr/lib/python2.6/site-packages', '/usr/lib/python2.6/site-packages/PIL', '/usr/lib/python2.6/site-packages/gst-0.10', '/usr/lib/python2.6/site-packages/gtk-2.0', '/usr/share/gourmet', '/usr/lib/python2.6/site-packages/gourmet/plugins', '/usr/lib/python2.6/site-packages/gourmet/plugins/import_export', '/usr/share/gourmet/']
Traceback (most recent call last):
File "/usr/lib/python2.6/site-packages/gourmet/plugin_loader.py", line 243, in get_module
self._loaded = __import__(self.module)
File "/usr/lib/python2.6/site-packages/gourmet/plugins/import_export/pdf_plugin/__init__.py", line 1, in <module>
import pdf_exporter_plugin,print_plugin
File "/usr/lib/python2.6/site-packages/gourmet/plugins/import_export/pdf_plugin/print_plugin.py", line 4, in <module>
import poppler
ImportError: No module named poppler
WARNING: Failed to load plugin pdf_plugin
Traceback (most recent call last):
File "/usr/lib/python2.6/site-packages/gourmet/plugin_loader.py", line 93, in load_active_plugins
self.active_plugins.extend(self.available_plugin_sets[p].plugins)
File "/usr/lib/python2.6/site-packages/gourmet/plugin_loader.py", line 256, in __getattr__
if attr == 'plugins': return self.get_plugins()
File "/usr/lib/python2.6/site-packages/gourmet/plugin_loader.py", line 262, in get_plugins
return self.get_module().plugins
AttributeError: 'NoneType' object has no attribute 'plugins'
/usr/lib/python2.6/site-packages/gourmet/backends/db.py:294: SADeprecationWarning: The Binary type has been renamed to LargeBinary.
Column('image',Binary(),**{}),
/usr/lib/python2.6/site-packages/gourmet/backends/db.py:295: SADeprecationWarning: The Binary type has been renamed to LargeBinary.
Column('thumb',Binary(),**{}),
/usr/lib/python2.6/site-packages/gourmet/gtk_extras/mnemonic_manager.py:312: GtkWarning: Invalid input string
widget.set_text_with_mnemonic(txt[0:index] + '_' + txt[index:])
/usr/lib/python2.6/site-packages/gourmet/GourmetRecipeManager.py:1011: GtkWarning: Invalid input string
self.main.add(self.main_notebook)
Gourmet starts but I can't create a new recipe. I've already tried to change the first line in /usr/bin/gourmet to
#!/usr/bin/python2.6
but it doesn't make any difference. Does anyone know what to do.
Thanks, mario.

I'm experiencing the same issues with Arch and Openbox using gourmet and gourmet-dev. Sorry I don't have anything to add. I installed python-poppler from AUR and that got rid of the errors on startup, but when trying to create a new recipe I get
[mbynum@m1330 ~]$ gourmet
Problem adding recipe with dictionary...
KEY: deleted of type <type 'str'> VALUE: False of type <type 'bool'>
KEY: last_modified of type <type 'str'> VALUE: 1286338412.47 of type <type 'float'>
KEY: title of type <type 'str'> VALUE: New Recipe of type <type 'unicode'>
Traceback (most recent call last):
File "/usr/lib/python2.6/site-packages/gourmet/GourmetRecipeManager.py", line 1132, in show
rc=reccard.RecCard(self)
File "/usr/lib/python2.6/site-packages/gourmet/reccard.py", line 69, in __init__
recipe = self.rg.rd.new_rec()
File "/usr/lib/python2.6/site-packages/gourmet/backends/db.py", line 1416, in new_rec
return self.add_rec(blankdict)
File "/usr/lib/python2.6/site-packages/gourmet/backends/db.py", line 1179, in add_rec
ret = self.do_add_rec(dic)
File "/usr/lib/python2.6/site-packages/gourmet/backends/db.py", line 1304, in do_add_rec
select = self.recipe_table.select(self.recipe_table.c.id==insert_statement.execute(**rdict).lastrowid)
File "/usr/lib/python2.6/site-packages/sqlalchemy/engine/base.py", line 2310, in lastrowid
return self.cursor.lastrowid
AttributeError: 'NoneType' object has no attribute 'lastrowid'
I don't know any python, so I'm not sure what these errors are pointing to. Hopefully someone else can give us some insight.

Problem with Embedded Event Manager and Object Tracking

Hi,
I have a 2801 running c2801-advipservicesk9-mz.124-24.T2.bin. It has the following configuration:
track 300 list boolean or
object 10
object 11
object 12
object 13
event manager applet clear_ipsec_tunnel
event track 300 state down
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
My problem is that after the tracked object number 300 transitions from an up state to a down state, nothing happens. It seems like the applet doesn't work with object tracking. Here's what I see in logs:
Dec 7 21:52:32.236 MCK: %TRACKING-5-STATE: 12 ip sla 12 reachability Up->Down
Dec 7 21:52:37.236 MCK: %TRACKING-5-STATE: 13 ip sla 13 reachability Up->Down
Dec 7 21:52:57.236 MCK: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
Dec 7 21:53:07.236 MCK: %TRACKING-5-STATE: 11 ip sla 11 reachability Up->Down
Dec 7 21:53:07.996 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
That's it. For some reason, the applet won't execute the CLI commands when the EEM applet is triggered. Am I doing something wrong or I have encountered some bug? Thanks.

jclarke,
Today I added the router into the tacacs server database and the applet started working just fine by using my login name. So the working configuration looks like this:
event manager session cli username "my login name"
event manager applet clear_ipsec_tunnel
event track 300 state down maxrun 30
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
Then I tried to use a login name from the local database that has "privelege 15" access and of course the debug output showed me this:
Dec 8 18:12:58.203 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
Dec 8 18:12:58.203 MCK: fh_track_object_changed: Track notification 300 state down
Dec 8 18:12:58.203 MCK: fh_fd_track_event_match: track ED pubinfo enqueue rc = 0
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: msg_type=64
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: sval=0
Dec 8 18:12:58.219 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_open called.
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>enable
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Command authorization failed.
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>clear crypto session
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : ^
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : % Invalid input detected at '^' marker.
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel: IPSec tunnel has been cleared by clear_ipsec_tunnel applet
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_close called.
So I guess this problem arises when you have command authorization enabled and the tacacs server is not reachable or something like that. I have tried to find a way to use the local database instead of using the aaa server but didn't succeed. Although I have found an interesting workaround. Here it is:
Link: http://blog.ioshints.info/2007/05/command-authorization-fails-with-eem.html
Workaround found after reading the "Executing IOS commands from Tcl shell" from the "Tclsh on Cisco IOS tutorial".
On the above article it is mentionned that the ios_config command is executed inside the context of another VTY line (also found with the AAA debug). The workaround is to define the FIRST VTY line with "transport input none" to prevent ssh or telnet to grab it and to configure the aaa authorization without any command authorization for this line.
Kind regards
Christian Chautems
Looks great, but I am not quite sure how to "configure the aaa authorization without any command authorization for this line".
Anyway, jclarke thank you so much for taking your time to look into my problem and for your help.

Reset & reverse document with open item managed and none open item managed

Dear forum,
I would like to confirm the below.
If i have a posted document where the double entry has open item managed account and none open item managed account and where the open item managed account is cleared, how can i reverse this document.
The problem now is FBRA cannot reset and reverse (as the document partly has none open item managed account) and FB08 also cannot reverse (as part of the account is open item managed account and it is cleared).
Besides manually reverse via FB01, any other method?
Thanks
Moderator: Please, avoid asking basic questions

Which document are you trying to clear using FBRA? You should reset the "clearing document" using FBRA; not the original document that has one open item and one non-open item. Once you reset the clearing document using FBRA, you should then be able to reverse the original document (the one that has one open item and one non-open item) using FB08.

[eSSO] Profiles in Logon Manager

People!
We have Logon Manager, and are going to make the custom MSI so we can deploy it through ZenWorks. The question is, we have three profiles of users (managers, users and builders). The first uses the entire pool of apps we included in Logon Manager. The second type uses a subset of these, and the third one, only 3 or 4 apps of the set.
We generated several versions of the MSI with the configurations, but although each MSI reflect these profiles of people, when installed ALL users (belonging to the three profiles) have the entire set of apps in their LM app pool.
The LM is using AD for storing credentials. Let me know how this can be done.
Thanks!

Hi Octavion,
I am trying to connect MS AD which is on SSL from eSSO LM Manager.
AD is running on 636 SSL port - this is already tested with Softerra LDAP Browser.
I am getting connected on (SSL checked) 636 if I select "LDAP Compliant Directory" while connecting.
It is ot getting connected if I choose "Microsoft Active Directory" from Drag Drop Repositories list.
I am getting an error Service not Operational,iIf I provide IP Address of AD Server. If I provide Fully Qualified DOmain Name of LDAP Server I am getting an error "Log On Failure-Unknown Username or Bad Passowrd".
- Mangesh

Working with version management and promotion management best practices BO 4.1

Hi Experts
I wondered if anybody knows if there is a document or something about best practices to work with the version management and promotion management in BO 4.1?
Our Environment includes two servers. The first one is our development and test server. The second server is our prod system.
Now on the dev server we have basically two folders called dev and test. We control access to them with a right system based on the folder structure.
My question now is how you would work in this scenario (third server is not an option). Main target is to have as few reports as possible. Therefore we try to work with the version management system and only have one version of each report in the dev folder of the cms. But this is where problems start. Sometimes the newest version is not the version we want to publish to the test folder or even prod server.
How would you publish the report to the other folder? Make a copy of the concerned report (transport to the same system via promotion management is not possible). Also how would you use the version management in regards to the folder structure? Only use version management in dev folder and export reports to test folder (out of vms control) or also use vms in test folder and how would that work?
Further more I’d be interested in learning best practices with promotion management. I found out that the promotion of a report that doesn’t exist in prod doesn’t make any problems. But as soon as an older version already exists there is only partial success and the prod folder gets renamed to “test”.
Any suggestions on how to handle these problems?
Thank you and regards
Lars

Thank you for your answer.
So you are basically proposing to work with the vms in the dev folder and publish the desired version to the test folder. And the test folder is out of version control in this scenario if I understood you correctly (like simple data storage)?
And how would you suggest promoting reports to the prod system? Simply by promoting the
desired version from dev folder directly to prod? This would probably lead to inconsistence because we would need to promote from dev system to test and dev to prod instead of promoting a straight line from dev over test to prod. Furthermore it would not solve the problem of the promoting result itself (A new folder called dev will be generated in prod but the report gets promoted to the prod folder if there was no report before).
Thank you for the link. I came across this page just a few days ago and found also lots
of other tutorials and papers describing the basic promoting process. The promoting process in general is clear to me but I wondered if it is possible to change some parameters to prevent folder renaming for example.
Regards
Lars

WebLogic Admin Console won't work with java security manager enabled.

By just enabling the security manager on the command line with -Djava.security.manager and using the default weblogic.policy in the server/lib directory, the admin console will not work. I just see a blank page when I try to access the admin console with permission errors all over on the server console.
In looking at the admin console's weblogic.xml it should have access to everything since it contains:
grant {
permission java.security.AllPermission;
Are there known issues with this? If I add this permission to the weblogic.policy file everything works fine but then I might as well not turn on the security manager.
Thanks,
Dave

David,
I was glad to see your post regarding WLS 9.2 and the troubles with enabling Java Security Manager.
Were you able to learn any more on things like - why doesn't the admin console work when the security manager is enabled with the default policy file. Also, why is it so difficult to add permissions for your own applications and get them to actually work.
I'd be curious to see if you were able to get it to work or if you have any insights or resources that can help with this as we are really struggling to get a restrictive policy file that works.
Thanks,
D

Problem with the agent console created in the ESSO-Logon Manager 64 bits

Friends,
When I use the installer that I created in the console ESSO-Logon Manager for 32-bit, this I install it on the client side and when I synchronize with the console-Logon Manager ESSO brings me and I can see the agent all the templates I configured.
I have a problem with the agent console created in the Logon Manager ESSO-64bit.
When I use this installer on the client stations and then by the agent does not envision the applications that I have configured in the console.
This causes you can not do single sign on to applications that I have configured in the client stations
To generate this installer use the source name: ESSO-LMx64.msi
Can someone please help me with this problem, this only happens when I use the msi installer on 64-bit client stations.
Thanks.

Jackson_Bill wrote:
What IDE are you using and what platform?Read first.
Moh Bob wrote:
I'm using J2ME platform SDK 3.0
db

Management agents for 10g OEM Grid setup with HP's MC/Serviceguard

I am trying to set up the OEM Management agents in a MCserviceguard environment.
Each db is a serviceguard "package" with its own disks and a floating IP. The floating
IP is constant, but is dynamicly associated with whichever server currently hosts the package.
The goal is to have a Management agent (formerly Intelligent agent) per db.
There are notes and tech forums on how this is achieved in version 9.2 with
Intelligent Agent. However, not having any luck in finding this for 10g.
In 9.2, a forum note
From: John Low 14-Sep-04 21:20
Subject: OEM setup with HPs MC-Serviceguard
Has anyone setup the 10g Management agents to run on an MC Service Guard environment
(or similar cluster environment on another platform)? If you have please let me know!!
David
Message was edited by:
wan00823
Message was edited by:
wan00823

Here is a nice document that should answer your question
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gEMAgentActivePassive.pdf
I did not bother installing three agents. I just installed one at the package level. My hosts are monitored by HP Openview. OEM just monitors the databases.
I have not used the command line parameter in runInstaller to set the hostname. Here is how I did it - may not be supported though. I have learnt the hard way that with HPUX you are on your own for most part with OEM. I modify Disk1/install/oraparam.ini. Change SHOW_HOSTNAME=NEVER_SHOW to SHOW_HOSTNAME=ALWAYS_SHOW. Installer will prompt you for hostname and the network card to use. Choose the one to which the service guard ip is attached to and change the hostname.
Take a look at my previous post regarding installing management service I have the tweaking described in more detail. The tweak is same for both management agent and management service install.
10g Grid Control and MC/Service Guard on HP-UX 11i

ESSO Logon Manager not working with FireFox 3.5

Hi,
I am using Oracle ESSO Logon Manager (v.10.1.410) but it's not detecting my FireFox 3.5.3 browser.
I am not able to Login using Logon Manager to any of web sites while browsing using FF3.5+
regards,
S.Vasanth Kumar.
Edited by: vasanth.s.kumar on Oct 6, 2009 12:37 PM

Hi,
this is planned for a future release of Logon Manager. Currently 3.0 is the highest version supported.
There is an enhancement request (8652660) logged for support of FF3.5
Regards

Esso logon manager client - Application List Blank

Hi
I have a scenario where the esso logon manager anf provisioning gateway clients are installed on the D drive of a client pc.This is due to the fact that a new batch of HP laptops have their system partition as C drive and their windows partion as the D Drive. So applications are automatically forced to install to the D Drive instead of the C drive as per default.
Upon rebooting the machine after installing the packaged esso msi packaged apps the esso application list is blank ?? However if the packages are installed to the C drive on another machine esso works fine.
Are there any tweaks or hacks or any solution to get this to work.
Your help would be greatly appreciated
Minesh

Check your Global Agent Settings. Specifically, I would check the one related to your synchronizer. This is a setting that exists in the registry of the client that points to the location of the dll file that it uses to do its synchronization with your chosen repository. You can find this setting in the Administrative Console under Synchronization-->[Synchronizer Name]-->Required-->Extension Location
There are some other DLL extension files that could be explicitly defined as well in the Global Agent Settings, I would go through your values and ensure they are set to the correct values, but the specific DLL that is preventing you from seeing templates is the one under your Synchronizer.

How to generate an msi in Logon Manager ESSO

Friends,
How to create a msi in the administrative console logon manager to install it on a pc client to access automatic.
Very grateful

Hi
In version ESSO-LM 11.1.1.5 the agent customised MSI can be created completely in the admin console.
Copy ESSO-LM MSI from the original software, load it into the generate customised MSI wizard. Select the features you want including the correct synchroniser, select next, add the global agent settings set that you know function. Name the new MSI and generate.
Run it with a command similar to this for a silent install:
msiexec.exe /i "<install path>\ESSO-LM_XP_23Sepr11.msi" /qn
Hope this helps
S

Problems with display of preview - and Adobe's tech support.

Hello, all.
After quite a bit of struggle I am still experiencing problems with the way Bridge CS5 displays previews. Previews are displayed with rather low quality. By that I mean low resolution that causes images to appear pixelated and out of focus. I've tried every possible setting in Bridge (or at least I think I have) but nothing seems to work. The setting that forces Previews to be built to the specific monitor size of the computer used doesn't work for me as I spend equal amounts of time working between my Macbook Pro 17" and my Apple 30" cinema display that have different resolutions. I've tried this setting and the preview images created on the notebook would not display at all on the 30" display.
I have contacted support only to find it is nearly non-existent. A voice obviously from someone located in India answered and kept asking what I considered to be basic questions and must have used the word "apologize" at least 20 to 30 times (no exageration) during the 1 hour and 43 minutes we were on the phone to accomplish nothing other than to "register" my complaint.
What is happening to Adobe ? This is not a joke, a rumor or an angry comment but rather a serious question from a user who has built a professional workflow based on the use of Adobe's products. I have been an user of the Adobe Creative Suite since its very first version and of the individual applications even before then. Bridge is one of the applications I use the most in my workflow that involves the organization of my large database of medical images I keep from my treatments and research. So this is very serious to me. I am now on the phone with Adobe waiting again to speak with someone in technical support. I was told the average waiting time would take between 35 and 50 minutes and I didn't think it would be possible but so far I have been on hold waiting for 1 hour and 7 minutes and someone has yet to answer the phone. What is happening with Adobe ? Is the company about to go out of business ? The last time I remember experiencing such a lack of support from a company I did so when contacting Polaroid and we all know what happened to it.
To make matters worse I have twice contacted Adobe and asked their technical support agent to remove a phone number that they seem to have mistakenly written as a contact number in my files. More than one month after I registered my support request I finally received an e-mail stating that had tried to contact me at the phone that isn't mine and shouldn't be a part of my records despite the fact I have instructed them twice to remove. There are serious legal implications here as I am bound to confidentiality when it comes to the medical information I manage with my Adobe applications and the idea that someone in technical support may accidentally share this information with a stranger while calling the wrong number is a serious problem.
What is going on ?
Outside of this forum I have no idea who to contact and if it is even worthwhile doing so as it may prove to be a huge waste of time.
Bridge has been a problem application since its inception. In fact the only version of Bridge that seemed to have worked (somewhat) right out of the box was the first one. I have experienced problems with Bridge with every single new version. Previews that don't display properly, crashes, folder hierarchy indicators not displaying properly, and others. The same images display fine if I open them in Apple's OS X Preview or Photoshop CS5. The problem is restricted to Bridge. All images are RAW high-quality images from a professional Canon EOS 1Ds MK II camera with a 17 megapixel full size sensor, and they always look stunning on everything else.
What is one to do ???
Sorry about the long post but I am one frustrated user who doesn't know what else to do.
Thanks,
Joe

Hi again, Steve.
In answer to your questions:
> What view are you using for the Slideshow (centered, fit screen, fill screen, 100%)?
Centered.
> What is the slide duration set to in Slide Show Options, does changing it to manual help?
I have it always set to manual.
> What are you're Preferences> Advanced> settings for 'Software Rendering' and 'Monitor Previews' (checked or unchecked)?
I've tried both choices for both options. My usual default options are 'Software Rendering' unchecked as I have a new Macbook Pro (only a few months old) and the graphics card is powerful enough to handle the previews and 'Monitor Previews' also unchecked.
> What are you're Preferences> Cache settings for Options (Keep 100%..., Automatically Export...)?
' Keep 100% Previews in Cache ' option - checked
' Automatically Export Cache to Folders When Possible ' option - unchecked
> What resolutions do you have set for both the 17" MBP and 30" ACD?
Their native resolutions: 1920 x 1200 for the MBP 17" built-in display and 2560 x 1600 for the 30" cinema display.
> In the Mac System Prefs.> Energy Saver... do you have the Automatic graphics switching checked off ?
No. I have this option checked for both Battery and Power Adapter.
On Bridge's interface upper right hand corner I have also selected using one of its pull down menus the following options:
' Always High Quality ' and ' Generate 100% Previews '
Any ideas ???
Thanks,
Joe

Esso Agents 11.1.1.2.0 with Legacy Logon manager and PG

Similar Messages

Maybe you are looking for