Establishing Forcasting
Hello,
I am getting the following error when trying to establish forecasting within the CRM:
A forecast can be validated only if all forecast users, other than the top person in the reporting tree, have a manager included in the forecast. Two or more of the users, related to the roles you have selected for your forecast, do not have managers. Please review your selected roles and their associated users in User Management to ensure that your reporting tree is valid and then try again.(SBL-ODS-00137)
Does this error refer to users not having a direct report in "Reports To" field or "Supervisor" as everyone has a direct report in "Reports To" .
Is anyone able to shed some light on this very basic question i am sure.
You need to make sure that the hierarchy chain is unbroken when you add the roles to the forecast. In other words, if your Hierarchy is something like this:
CEO
SVP
VP
Regional VP
Market Mgr
Sales Rep
You cannot include the CEO, VP, and Market Mgr in the forecast without also including the SVP and Regional VP... the Market Mgr's forecast has to roll up to the Regional VP and the VP's has to roll up to the SVP... they cannot skip a level in the hierarchy.
You do not need to include Sales Rep or anything lower in the hierarchy, but the reporting chain between the included roles must be complete.
If you have any additional questions regarding forecasting, I encourage you to post in the CRM On Demand Administration forum. The participants in that forum are more focused on administration topics such as this.
Good luck,
Mike L
Similar Messages
-
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
This is a new problem for an IPod Touch I have had for a year. The IPod is hooked up by cable and appears in ITunes. I can examine all the content on the IPOD and I can click "sync". It goes through to Step 7 and then the error messages occur. First "a session could not be started with the IPod" and when that dialogue box is closed, the message "a connection could not be established to the IPod."
Maybe:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities -
Problem with an incoming message. For example, during my conversation the second line receives a call, I hear the sound in dynamics such as "piiiip piiiip," but when in this situation I recieve SMS and i hear established melody and I do't hear the person on all over SMS. How to solve this problem? Perhaps someone tell me? save in advance
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Establish mail flow from Exchange 2007 to Exchange 2013
I am currently using Exchange 2007 into three sites in three cities and two of the sites are connected to Internet sending and receiving emails via Edge transport servers.
Now I am planning to upgrade to exchange 2013 CU1. I don't find any documentation on how to establish mail flow between Exchange 2007 and Exchange 2013. Will it be automatic or do i need to create specific connectors between them?Was this question answered. We're in the same situation now as we're upgrading to Exchange 2013 from 2007. The latest CU certainly helped. Initially the test mailboxes on Exchange 2013 couldn't email each other - This was resolved with CU7 and
using "Custom Settings" - manually entered IPs for DNS in the Exchange Admin Center "DNS Lookups".
Issue at the moment Test mailboxes on Exchange 2013 cannot email mailboxes on 2007 or visa-versa and mail from external sources queues on the 2007 box.
Any assistance will be greatly appreciated. -
How do I send an email from my Iphone to a "group" that I have established in my Yahoo account?
So I have bought a couple of apps on my iphone and would like to transfer them to my itunes library, but not sure how.
iTunes > File > Transfer purchases
When I plug in my iphone and try and sync the two, I get a warning from itunes that everything on my iphone will be wiped and everything from my itunes library will be moved to it.
Have you changed the computer you are syncing with? -
Connection Pool establishment problem
Hi Experts,
we have one application with JCo mechanism. For this application,
we are using one properties file, which holds ABAP connection information. From this connection information(sapconn.props), we created connection pool and fetching data from the back end. Now my requirement is, instead of this properties file, we want to use one SLD, from this i would like to fetch connection information and establish a connection pool. How can we implement this one...?
Is there any API to read the ABAP connection informaation from visual admin (JCo RFC provider) ?
Thanks
mahaYour question has been answered in this [thread|connection establishment doubt;.
Please read the [rules|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], in particular - do not cross post.
-- Vladimir -
JDBC Adapter - Established database connection failed
Hi Guys,
we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
So in my point of view we have done everything right during the installation.
Now the developer tested theJDBC Adapter and he comes back with following Error:
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Do you have any ideas?
Regards
MarkusHello Markus,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar
Reward Points If it is Useful.. -
How to establish an Https connection from a html client
Hi! I�m totally new to Java so my question is rather"stupid". I have an html page that sends a post to a servlet
<form name="form" action="servlet/ServletLogOn" method="post">
I want to establish an https connection between the client and the servlet. How is it?
Thanks in advance.Ignore the previous poster's reply - he was obviously mislead by my original post re: JSSE.
How you install an SSL certificate on your webserver is completely dependent on the webserver you are using. Ususally there is some functionality for doing this from the administrative interface - usually involves pasting some text from the CA's (certificate authority, e.g. Verisign) site into a text box and designating a port number for SSL traffic (use 443, it's internet standard). I've actually only done this for Netscape Enterprise Server - you may want to find a forum for users of your webserver to ask for specifics. -
What is the best way to establish sso between iphone and IIS?
Hi experts,
I try to configure the SCEP, and I can view a IIS content with "Certificate required", but, can I validate the username with this certificate?
thanks in advance,Hi,
Yes, TCP/IP is most universal way for the communication. Otherwise you should develop some parts for establish connection / break connection / wait for the data. This way also good when you need to transfer the data across network.
Another possible way is following: you can create DLL from your LabVIEW code, then call this dll from your C# application, and interchange the data through this DLL. Here you can use different techniquies (also TCP/IP as well). The advantage of this method that you will establish LabVIEW<->LabVIEW communication.
In attached example I have create "quick and dirty" project with shared variables. LabVIEW application will write the shared variable, then external application will read this, increment variable, then LabVIEW will read it back. I have used CVI, but you can call SharedLib from C#, here no differences.
Something like that:
best regards,
Andrey.
Message Edited by Andrey Dmitriev on 10-28-2008 03:17 PM
Attachments:
App Intercomm Test.zip 224 KB
ScreenshotSV.png 13 KB -
ITunes won't let me add new songs to established playlists - what's wrong?
I'm more than frustrated. Yesterday, everything worked fine! I created 3 playlists and did the drag/drop of songs into the playlists. Today, I bought more music. Those songs show up in my library. But ... when I try to drag/drop the new songs into the established playlists, the playlists don't update. No new songs.
iTunes 6.0.4.2
Windows XP Home
Thanks!
Windows XPI'm really a novice at this ... I just found the added songs. I thought they would be put in alphabetically just like the first round. They weren't ... they were added on the bottom.
Sorry for my stupid question. ::sigh:: -
Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support -
(VPN) There is no internet after connection established.
Hi Guys,
Mission: PC-1 in country X would like to use the internet(browsing, using his IP-->) of PC-2 in country Y.
Stage: on PC-2 i created "new incoming connection trough the internet" (VPN server) and on PC-1 i set up VPN client with (PPTP). The connection was established, i could browse even shared folder between PC-1 to PC-2,
BUT: on PC-1 after connected to VPN there was no internet, only file shareing, could not ping the PC-2 Ip, only the PC-2's VPN server. i spent hours checking settings, playing with IPs, route tables, but nothing worked.
i need assistant, what i did forgot or how can i accomplish my mission other way.
P.S in many cases i saw people on Client (PC-1) only unchecked "Use default gateway on remote network".. yes but than its use PC-1 ISP's internet.. but thats what i dont want .. i want to use PC-2's ISP internet...
Please help.Hi,
This issue may occur if you configure the VPN connection to use the default gateway on the remote network. This setting overrides the default gateway settings that you specify in your Transmission Control Protocol/Internet Protocol (TCP/IP) settings.
Please refer to this fix:
https://support.microsoft.com/kb/317025?wa=wsignin1.0
Karen Hu
TechNet Community Support -
I just purchased the iMac and was in the process of setting it up and it locked up, requiring me to put in a password. I never established a password, does the iMac have a default password?
If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
Tell us the issues that you encounter trying to set up the iPhone with the mac.com account. -
Cisco asa- vpn established but cant ping
I am using 2 cisco asa 5505 routers, i have established vpn between them but i cant ping client internal or outside interface, client can ping my outside interface. Only configuration on client is basic easy vpn settings and interfaces, here is server part configuration on my side:
ASA Version 9.1(1)
hostname ciscoasa
enable password NuLKvvWGg.x9HEKO encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.1.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group iskon
ip address pppoe setroute
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network inside
subnet 10.1.2.0 255.255.255.0
object network outside
subnet 10.1.3.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
access-list 101 extended permit object-group DM_INLINE_PROTOCOL_1 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0
access-list 102 extended permit object-group DM_INLINE_PROTOCOL_2 10.1.3.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list global_access extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit 10.1.3.0 255.255.255.0 echo-reply inside
icmp permit any inside
icmp permit any outside
icmp permit 10.1.3.0 255.255.255.0 echo-reply outside
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (any,any) source static outside outside destination static inside inside no-proxy-arp
object network obj_any
nat (inside,outside) dynamic interface
access-group global_access global
route inside 0.0.0.0 0.0.0.0 10.1.3.1 tunneled
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.1.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set mySET esp-3des esp-md5-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map DYN-MAP 5 set ikev1 transform-set mySET
crypto map MAP 60 ipsec-isakmp dynamic DYN-MAP
crypto map MAP interface outside
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption des
hash md5
group 2
lifetime 86400
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
vpdn group iskon request dialout pppoe
vpdn group iskon localname *********
vpdn group iskon ppp authentication pap
vpdn username ***** password *****
dhcpd auto_config outside
dhcpd address 10.1.2.5-10.1.2.132 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy VPN internal
group-policy VPN attributes
split-tunnel-policy tunnelall
split-tunnel-network-list value 101
nem enable
username user password enq05bKrudsJMMBu encrypted privilege 15
username user attributes
vpn-group-policy VPN
vpn-session-timeout none
group-lock value VPN-TUNNEL
tunnel-group VPN-TUNNEL type remote-access
tunnel-group VPN-TUNNEL general-attributes
default-group-policy VPN
tunnel-group VPN-TUNNEL ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:3f2923b78a04ee8cfe9324e3e2733d78SOLVED!!! i just needed to configure nat here is configuration for any1 with same problem
: Saved
ASA Version 9.1(1)
hostname ciscoasa
enable password NuLKvvWGg.x9HEKO encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.1.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group iskon
ip address pppoe setroute
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network ladimirevci
subnet 10.1.2.0 255.255.255.0
object network lekenik
subnet 10.1.3.0 255.255.255.0
access-list 101 extended permit ip 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0
access-list 101 extended permit ip object lekenik object ladimirevci
access-list 101 extended permit ip object ladimirevci object lekenik
access-list outside_access_in extended permit ip object ladimirevci object lekenik
access-list outside_access_in extended permit ip object lekenik object ladimirevci
access-list outside_access_in extended permit ip any any
access-list inside_access_in extended permit ip object ladimirevci object lekenik
access-list inside_access_in extended permit ip object lekenik object ladimirevci
access-list inside_access_in extended permit ip any any
access-list nonat extended permit ip 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0
access-list 102 extended permit ip 10.1.3.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list global_access extended permit ip object lekenik object ladimirevci
access-list global_access extended permit ip object ladimirevci object lekenik
access-list global_access extended permit ip any any
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any echo-reply outside
asdm image disk0:/asdm-712.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (any,any) source static ladimirevci ladimirevci destination static lekenik lekenik
object network obj_any
nat (inside,outside) dynamic interface dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
access-group global_access global
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
http 10.1.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
no sysopt connection permit-vpn
crypto ipsec ikev1 transform-set mySET esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map DYN-MAP 5 set pfs
crypto dynamic-map DYN-MAP 5 set ikev1 transform-set mySET
crypto dynamic-map DYN-MAP 5 set reverse-route
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set reverse-route
crypto map MAP 60 ipsec-isakmp dynamic DYN-MAP
crypto map MAP interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ca trustpool policy
crypto ikev1 enable inside
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
console timeout 0
management-access inside
vpdn group iskon request dialout pppoe
vpdn group iskon localname vivaindo@iskon-dsl
vpdn group iskon ppp authentication pap
vpdn username vivaindo@iskon-dsl password *****
dhcpd auto_config outside
dhcpd address 10.1.2.5-10.1.2.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption rc4-md5 rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev2 ssl-clientless
group-policy VPN internal
group-policy VPN attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec
group-lock value VPN-TUNNEL
split-tunnel-policy tunnelspecified
split-tunnel-network-list value 101
nem enable
username user password enq05bKrudsJMMBu encrypted privilege 15
username user attributes
vpn-group-policy VPN
group-lock value VPN-TUNNEL
tunnel-group VPN-TUNNEL type remote-access
tunnel-group VPN-TUNNEL general-attributes
default-group-policy VPN
tunnel-group VPN-TUNNEL ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:ddac35422ebbf57095be7a1d33b0b67d
: end
asdm image disk0:/asdm-712.bin
no asdm history enable
Maybe you are looking for
-
I've got an iphone, and one of my favorite apps is the "Remote" app to control iTunes. Is there a similar app for the Mac that I can run, either in dashboard or as a standalone? It's frustrating that I can 'see' shared music through itunes, but I can
-
The underlining has become a real problem. Many words are both links within the page I'm on and also wikipedia links. When I clicki the wiki link takes predence.
-
Changes to a credit released document .
Hi Friends, A sales order has been credit blocked and subsequently released. Later when we make any kind of change to the the order , would the order go for credit check again . The condition being the value in ' no of days, field in credit cont
-
Iphone change Safari "open in mercury" to pdf
I want to know how to change defaud from "open in mercury" to "open in pdf" on safari after download a pdf file
-
Email attachments are changing the original icons to a generic preview icon
When I send or receive an attachment, the original icon such as photoshop is changed to a generic icon called preview which is white with a graphic of a photo and a magnifing loop. How do I stop this? thank you!