ESX24 Saves changes to my instruments in Editor - When choosing DONT SAVE

The header pretty much says it all...
I do editing in an instrument via the editor - when clicking in the "close" button of the editor I am presented with a dialog that asks me to whether save of dont save or cancel... I choose DONT SAVE on 3 different instruments--- However - when choosing another instrument and then going back to the instrument that I did not save - the changes I did not save are still there - in my case it left me with 5 un-playable instruments... Is this the standard behavior of the EXS24??? If so - what sense does that save dialog make ?
Thanks for any Replies

This sounds like the exact same (annoying) behavior as in L7. It's disheartening (I'm being nice) to hear that this hasn't been changed in L8.
The only way to work around this is to save your edits under names that will be easy to find when you later do a Finder search for them for the purpose of trashing them. Anyway, after you save those instruments, reload the original ones and you'll be OK.

Similar Messages

Can I change the defualt folder that opens when I press 'save' in answers?

Hi
like in the question above: can I change the default folder that opens when I press 'save' in answers?
it shows the path but in order to see the content of the folder where I wanna save sth i need to navigate through folders to get to that destination folder
can i change the set up so that by default directly the content of the folder displays where the report is saved?

I am on a webiste and wish to upload a photo.
I click on select file on the website
You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
To change the download direction, you must do so through your browser's Preferences. If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums. I do not use Safari.
If using Firefox>Preferences>General>Save Files to:

Disable "Do you want to save changes to *.pdf before closing?" when closing a tif

We upgraded to Office 2007 and decided to stop using the Office 2003 document imaging tool to view TIF TIFF files. This tool wasn't included with Office 2007 so we started using Acrobat 9.1.3 Standard as our default TIF viewer.
Here is the problem. When you close the TIF document you are prompted "Do you want to save changes to 'xxx.pdf' before closing?" Is there a way to disable this prompt? We don't want to convert the files since they are in a read only database.

Nope. Using WORD or Acrobat is forcing a conversion and it not an ideal way to view such files. In addition, you may want to change resolution or such of the graphic before you import it to something such as WORD. Many folks embed graphics that are 3500 dpi and millions of colors and totally bloat the file. They even crop the graphic and reduce the size, wondering why their DOC file is sooooo big. In that sense, there is an advantage to having some of the other tools available. You may have special needs and I do not want to second guess your company needs, so that is my two-cents worth. Sorry that I do not have other ideas, but using an existing graphics package would be the best for your need.

How to save changes to preset instruments

I make changes to the preset instruments (reverb/echo/etc) and I would like to save the instruments so I can use them in different projects. Is it possible?

When you change the settings for a patch and then click the name of the patch again in the Inspector, GarageBand 10 should show the following prompt:
Click "Save as" to name the patch and save the settings.
If you want to use the saved settings again, you will find them in the "user Settings" section of the Library Inspector.

How to save changes to downloaded instrument driver

I am using downloaded Tk278x drivers. The default address is different from my what I want. I tried to change the address in the VIs. But I am not lucky. How can I do it? Many thanks.

It looks like this is a driver that Tektronix wrote and donated to the Instrument Driver library. The VIs on the palette are a mix of examples and instrument driver VIs, and the examples hard-code the GPIB address. (The instrument driver VIs have the white background on the icon, and the examples have a gray background.)
So, if you are interested in using one of the examples in your application, I would make a copy of just that example VI. Be sure to rename the VI when you make a copy. (E.g., "My TEK 278X.vi". Otherwise, since LabVIEW only allows one VI of the same name in memory at a time, your application might link to the original VI in instr.lib.) Ensure that all of your VIs reference the new copy, and not the VI with the original name in instr.lib.
In these examples, it appears that there's a string constant on the diagram that you just need to change from "1" to whatever your GPIB address is.
I hope this helps.
Brian

In Dreamweaver CS3, can I save to Test AND Production FTP Servers when I press save the document?

Hi, and thank you for reading this.
I've setup a production and test FTP servers in Dreamweaver CS3. It is either saves to production or test server when I click COMMAND+S (CONTROL on PC), but I'd like teh file to be saved on both simultaneously. Persssing Sync the Servers won't work since the servers are not mine and they a bit different, teh files are not the same. I just would like to be able to save 1 file at a time in both production and server with one click.
I've been searching the Interenet but could not find anything other than basic FTP setup. Any help would be appreaciated. Thanks!
Anton

Hi John, first of all thank you for replying!
The reason why I would like to have Dreamweaver to save to both servers Test and the Production at the same time is because it would save me a lot of time keeping both servers more or less in sync. I have to keep both Test and Production servers syncronized, but only wihtin a specific content. While I test my design I do use Test server, but then the hassle begins when I am asked to make changes to the content.
For example, I have a content page called books.html. I first built it on a Test server. Then switched to the tab called Remote, connect to the Remote Server, and save it. Very simple.
However, then I need to create 10 more pages, lets call them books1.html, books2.html, and so on. Again sync them with the Remote server.
All is great, but then my boss comes and say, hey there is a mistake on these files: books3, books4, books7, and books8. Please change the text content on those. So, I know the pages are working fine, I just need to update the text on both Test and Remote servers.
So at this point I have to open these 4 files, change the text, then SAVE ALL to Test server. Then, I switch to Remote tab, go back to files press any key and 'Delete' keys so that Dreamweaver would see the change in file so that it would be able to save it. Then again 'SAVE ALL' to the Remote server.
This is happening very OFTEN. It would save me so much time and brain power remembering which files I should sync if I am in a hurry and jump from one project to another, losing track of small changes in files when there are a lot of .html files.
CMS is only in development now so I have to work with what I got. As to regard to backups, I use Time Machine so I am set with that. Plus I use MAMP. So basically I first use MAMP for testing, then upload changes to the Test server with all the BIG databases, and only then to Remote (production) with real Database. However, this is only when I develop new pages, very often I just need to modify what's already has been created. So that's why a feature like Save to BOTH servers (Test and Remote) would make a big difference to me.
- Nookeen
http://nookeen.com

When I try to save changes to an existing file, Acrobat X Standard stops working and closes. How to

After making changes to an existing pdf, when I select Save from the File menu Acrobat X Standard crashes and closes down. The same scenario happens if I choose Save As and select the same fie name. How do I save changes to an existing document? I can sometimes Save As using a new file name but that does not always work either.

Please try repairing Acrobat by going to the 'Help' menu > Repair Acrobat.
Also make sure that Acrobat is updated to the latest release.You can check for updates from the same 'Help' menu > check for updates.
Regards,
Ravi.

Could not save changes to this script because of a program error. -2706

OK, this is very odd! Please try the following and let me know your results:
1) Create a new script with the following example code:
set testList to {}
repeat with i from 1 to 8145
copy i to end of testList
end repeat
2) Save the script as an Application (name it whatever you like).
3) Launch the newly created Application and see if you get the same error message I am getting...
*Could not save changes to this script because of a program error.*
-2706
If you replace the number 8145 with 8144 (or any number less than 8145) the script runs without error. Any number greater than 8144 returns the error message shown above. Maybe there's a reason for this that I'm overlooking or is this another bug?
I looked up error code -2706 ([HERE|http://developer.apple.com/Mac/library/documentation/AppleScript/Concept ual/AppleScriptLangGuide/reference/ASLRerrorcodes.html]) which says it is a "*Stack overflow.*"
Thanx in advance for any insight on this!!
NOTE:
The only workaround I've found for this is to make sure the script resets the variable before it quits. Like this:
set testList to {}
repeat with i from 1 to 8145
copy i to end of testList
end repeat
set testList to ""

Hey Pierre, thanx for taking the time to scratch your head with me!
Very odd indeed.
Glad it's not just me that thinks this!
I've also noticed that the problem occurs even when you try to save the script as a compiled script. That's possible as long as you haven't run the script. Once you have run it, trying to save it seems impossible. You get the message: *“The document “Document title” could not be saved.”*
I've noticed the same thing as you and have experienced this extra error several times while trouble shooting this problem!
On the other hand, is there any good reason for which you would want to save such a big list? Are there any drawbacks to the workaround you've found?
I don't want to save ANY variable EVER unless I explicitly tell my script to do so! This variable is not a property, so why would my script want to save it? I haven't noticed any drawbacks to the workaround. Setting the list variable to "" or {} (or ANYthing with under 8145 items) seems to work fine. I just find it weird that my script can't "*save changes to itself*"?! What is there to save? It's just a variable that should release after my script has run ...unless I'm completely misunderstanding how variables work after ALL these years of scripting.
Btw, the following version of the script (as you probably already know) is much faster, although it doesn't change anything to the result:
*set testList to {}*
*set testListRef to a reference to testList*
*repeat with i from 1 to 8144*
*copy i to end of testListRef*
*end repeat*
Yeah, it definitely runs much faster this way! I just posted a quick example that would illustrate the 8144 list count limit. My script sets a variable to a list of numbers contained in a text file. This list is almost always rather large! Right now there are over 20,000 items in this list of numbers.
Again, thanx for your time my friend!!

Commit button on panelCollection toolbar facet does not save changes

Using ADF 11.
I have a master-detail relationship.
The master is in panelFormLayout.
The detail is af:table enclosed by af:panelCollection.
On the toolbar facet of the af:panelCollection, I have put a Commit button to save changes on the master table.
When pressing Commit, the changes on the master are not saved.
If I put the Commit button outside the toolbar facet of the af:panelCollection, it works.
Is there a way to have the Commit button working inside the toolbar facet of the af:panelCollection?

we have same issue, it seem to apply value only in the panelCollection.

After 9.5.1 iphoto doesn't save changes in its library

Since I've updated iphoto to v9.5.1, iphoto doesn't save changes made to the library.
When I
- delete event
- import event from aperture
- import pictures
everything goes well until I close and reopen iphoto. Than everything is the same as when I opened iphoto before the changes.
So it doesn't save the changes in its library.
Anyone experiencing the same problem? Or anyone who has a solution?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Error when trying to "Save for Web"

I, like others have the same problem in Photoshop Elements 6 editor when trying to "Save for Web". I get an error:
could not complete the export command because of a program error
I've searched the forum, but it seems like no one has found a solution.
I have a new PC with Windows 7 on it. It's Win 7 Ultimate 64-bit. i5 processor, 16GB RAM and plenty of HD space.
I am running Photoshop Elements 6.
When I used the same version of Photoshop Elements 6 on my old XP computer, I didn't have this problem.
Adobe Photoshop Elements Language Version: 6.0 (6.0 (20070910.r.377499))
Operating System: Windows Vista
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP
Physical processor count: 4
Built-in memory: 15822 MB
Free memory: 11064 MB
Memory available to Photoshop: 1621 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: 10571087952197841429
Application folder: D:\Program Files\Adobe Photoshop Elements\
Temporary file path: C:\Users\Roger\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 111.7G, 76.2G free
Primary Plug-ins folder: D:\Program Files\Adobe Photoshop Elements\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
   3D Transform 10.0 (10.0x001)
   ADM NO VERSION
   ASDStrm NO VERSION
   Accented Edges 9.0
   Angled Strokes 9.0
   Auto Divide 6.0.0.0 (6.0 (20070910.r.377499))
   Average 10.0 (10.0x001)
   BMP 10.0 (10.0x001)
   Bas Relief 9.0
   Camera Raw 4.2
   Chalk & Charcoal 9.0
   Charcoal 9.0
   Chrome 9.0
   Clouds 10.0 (10.0x001)
   Color Halftone 10.0 (10.0x001)
   Color Variations 10.0 (10.0x001)
   Colored Pencil 9.0
   CompuServe GIF 10.0 (10.0x001)
   Conditional Mode Change 10.0 (10.0x001)
   Conté Crayon 9.0
   Correct Camera Distortion 9.0
   Craquelure 9.0
   Crop and Straighten Photos Filter 10.0 (10.0x001)
   Crosshatch 9.0
   Crystallize 10.0 (10.0x001)
   Cutout 9.0
   Dark Strokes 9.0
   De-Interlace 10.0 (10.0x001)
   Difference Clouds 10.0 (10.0x001)
   Diffuse Glow 9.0
   Displace 10.0 (10.0x001)
   Dry Brush 9.0
   Extrude 10.0 (10.0x001)
   FastCore Routines 10.0 (10.0x001)
   Fibers 10.0 (10.0x001)
   Film Grain 9.0
   Filmstrip 10.0 (10.0x001)
   Filter Gallery 9.0
   Frame From Video 6.0
   Fresco 9.0
   Generic EPS 10.0
   Glass 9.0
   Glowing Edges 9.0
   Grain 9.0
   Graphic Pen 9.0
   Halftone Pattern 9.0
   Ink Outlines 9.0
   JPEG 2000 2.0
   Lens Flare 10.0 (10.0x001)
   Lighting Effects 10.0 (10.0x001)
   Liquify 7.0
   MMXCore Routines 10.0 (10.0x001)
   Magic Extractor 10.0 (10.0x001)
   Matlab Operation 10.0 (10.0x001)
   Mezzotint 10.0 (10.0x001)
   Mosaic Tiles 9.0
   Multiprocessor Support 10.0 (10.0x001)
   NTSC Colors 10.0 (10.0x001)
   Neon Glow 9.0
   Note Paper 9.0
   Ocean Ripple 9.0
   OnEdge 1, 0, 0, 1
   PCX 10.0 (10.0x001)
   PNG 10.0 (10.0x001)
   PNG Icons 1.22x1
   Paint Daubs 9.0
   Palette Knife 9.0
   Patchwork 9.0
   Photocopy 9.0
   PhotomergeUI 10.0 (10.0x001)
   Picture Package Filter 10.0 (10.0x001)
   Pinch 10.0 (10.0x001)
   Pixar 10.0 (10.0x001)
   Plaster 9.0
   Plastic Wrap 9.0
   Pointillize 10.0 (10.0x001)
   Polar Coordinates 10.0 (10.0x001)
   Poster Edges 9.0
   Radial Blur 10.0 (10.0x001)
   Read Watermark 1.70.19
   Reticulation 9.0
   Ripple 10.0 (10.0x001)
   Rough Pastels 9.0
   Save for Web 3.0
   ScriptingSupport 10.0
   Shear 10.0 (10.0x001)
   Smart Blur 10.0 (10.0x001)
   Smudge Stick 9.0
   Solarize 10.0 (10.0x001)
   Spatter 9.0
   Spherize 10.0 (10.0x001)
   Sponge 9.0
   Sprayed Strokes 9.0
   Stained Glass 9.0
   Stamp 9.0
   Straighten Image 10.0 (10.0x001)
   Straighten and Crop Image 10.0 (10.0x001)
   Sumi-e 9.0
   Targa 10.0 (10.0x001)
   Texture Fill 10.0 (10.0x001)
   TextureSelect 10.0 (10.0x001)
   Texturizer 9.0
   Tiles 10.0 (10.0x001)
   Torn Edges 9.0
   Twain Acquire 10.0 (10.0x001)
   Twain Select 10.0 (10.0x001)
   Twirl 10.0 (10.0x001)
   Underpainting 9.0
   WIA Support 10.0 (10.0x001)
   Water Paper 9.0
   Watercolor 9.0
   Wave 10.0 (10.0x001)
   Wind 10.0 (10.0x001)
   Wireless Bitmap 10.0 (10.0x001)
   ZigZag 10.0 (10.0x001)
Plug-ins that failed to load: NONE
Installed TWAIN devices:
   WIA-HP Scanjet 4800 series

I also tried the alt/ctrl/shift buttons when clicking Editor in the Photoshop welcome screen. It did ask if I wanted to reset the preferences. I chose yes. I still get the same error message when trying to save for web.
Below....showing I don't have a "save for web" folder on my C drive.
And below, showing the same error after pressing alt/shift/ctrl when clicking on editor and clearing the preferences.
I don't have a 'Save for Web' folder anywhere on my C: drive. I searched and came up with no folder with the text "save for web" in it.
I did find a "save for web" folder on my D: drive and deleted that.. but now when I start up Photoshop, the option for Save for Web is grayed out...not able to select it.

Site Editor : can't save changes

When I save edited pages in the Site Editor (incontext editing), I get the message:
"There was a communication error with the server. Your internet connection may not be working or the server might not respond"
The one page site was created and uploaded from Dreamweaver with no problems.
OSX 10.8
Safari 5.2
Thanks for the help,
Cam

Hi:
I'm back... The Site Editor won't save again. Apparently, I have malformed characters on my site.
What's a malformed character? Am I creating them? Make them stop!
Thanks.

How do I save changes made to games? Example...Mafia Wars on FaceBook...Thank's

Trying to change stats on Mafia Wars game for FaceBook. It allows the change and then it goes away when I try to play. How do I make them permanent? Thank's
== This happened ==
A few times a week
== today

I afraid you cannot save these changes with the F12 developer tool. You could copy these changes to an external editor.
Note The Changes tab will clear if you close the F12 developer tools, but the changes you made with
DOM Explorer persist until you refresh the webpage.
More information about F12 developer tools, please refer to here:
Using the F12 developer tools
DOM explore
https://msdn.microsoft.com/en-us/library/ie/dn255008(v=vs.85).aspx#editing_an_element
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Instrument I/O Assistant refuses to save serial port settings

(I'm using Labview 7.1 on
Windows XP)
I have a problem communicating with a device over a serial port using my lab
computer. The serial port is the only port on the device.
I have successfully communicated with the device on this computer using
windows HyperTerminal.
I have successfully communicated with the device through Labview on another
computer.
I am using the Instrument I/O assistant to get things up and running, this
worked fine on the other computer, but on this computer there are problems.
When I click on COM1port "properties" in the "select
device" pane I get the "Edit vesa resource" dialog, but it comes
up with a "port settings conflict", it says:
"The Vesa port settings are different from the Windows port settings. Select the
settings you want to keep."
Whichever settings I choose, when I hit save I get a dialog box with the
message "could not write specified port settings to the operating
system." So it won't save the settings and so it won't work when I run the
vi. (I know the right settings and they work in HyperTerminal, Labview just
won't accept them.
Can anyone help?
thanks,
Luke
Luke_A_P

I have solved the problem!
It seems that admin rights are needed to save the settings, this seemed odd to me since HyperTerminal did not need them and I could change settings in device manager (which didn't help in itself). But, trying Labview with an admin logged in allowed the settings to be saved.
Luke
Luke_A_P

Is it possible to play my guitar and have the sound changed to different instrument like a sax? Like an emulator.

Is it possible to play my guitar and have the sound changed to different instrument like a sax? Have my Mac act as an emulator. I'm a guitar player, not a sax player, but I want a sax solo in my song.

You'd need a midi guitar for that. GarageBand does not create midi from audio. Use a different application, like Finale to create a midi file from your Guitar audio file.
Or play the sax track using a midi keyboard or simply GarageBand's musical typing. You can use the track editor to add expression and articulation afterwards.

ESX24 Saves changes to my instruments in Editor - When choosing DONT SAVE

Similar Messages

Maybe you are looking for