EUL Export errors - comments in Custom Folders

In the spirit of sharing.
I recently had some major problems releasing a Discoverer EUL through our database release process, using the EUL Export functionality (i.e. creating an .eex file).
I have a large complex Custom Folder in the EUL, comprised of 14 large unioned select statements.
The EUL would seem to import OK into the new database, but a Workbook based on the Custom Folder continually came up with an item dependancy error.
We traced the problem back to the Custom Folder, which was invalid in the Admin Tool, and therefore not visible to the EUL Users - with a workbook based on the offending Custom Folder.
The moral of the story is DO NOT put single line comments "--" in Discoverer Custom Folder SQL queries - especially large queries. The EUL Export process will unformat your queries, and the single line comments will end up inside the valid SQL - which will invalidate it.
Only use block comments "/* Comment */" in your Custom Folders.
Hope this helps someone else save some time.

Just a note to thank u for this post. This is one of the answers I was searching for today and now I see the light!

Similar Messages

  • Export error adobe premiere elements 12

    im trying to save a video as AVCHD with the YouTube HD presetting. ive done it before but this past time ive tried it, it gave me a message saying export error an unknown error has occured.
    Please help
    Thanks,
    Noah Ogan

    Noah Ogan
    Thanks for the reply. It is late where I am so I will just give a few comments now and more in the morning.
    1. If you have not already, open a new project and try the export
    Publish+Share
    Computer
    AVCHD
    with Presets = MP4 - H.264 1920 x 1080p30 (assuming a NTSC setup)
    2. What is the video compression for your file with the .avi file extension? The file property appears to include
    a. file size 101 GB and file extension .avi.
    b. duration 25 minutes and 7 seconds
    But, when you get to export as cited above, what is the estimated file size and duration? The duration should
    remain 25 minutes and 7 seconds, but what does it show for estimated file size.
    3. Is your computer optimized - no pile ups of preview files, conformed audio, or conformed video files? Where are
    the Scratch Disks pointed to and how much free hard drive space is there?
    4. Do you have any older source files that worked before for export that you could try in the present situation to compare with this current source?
    More later.
    ATR

  • Export - error 1005033

    Hi,i'm trying to export data using maxl script:export database tbcdemo.tbc1copy data to data_file 'tbc1copy1.exp' ; and I get this error message: OK/INFO - 1019020 - Writing Free Space Information For Database <tbc1copy>. OK/INFO - 1005029 - Parallel export enabled: Number of export threads <1>. ERROR - 1005033 - Parallel export error: Failed to open input file <QTEMP/QACX0CDS60>.. What is wrong with this command?How come the error 1005033 is not in the Messages Help manual?This is Hyperion Essbase MaxL Shell - Release 6.5.4 (6.51.000) running on AS/400.Thanks,Daniel

    Does anyone know if there are fixes coming for this.   I have only had the software for a week and still unsuccessful in producing a single quality video.  The only way i have gotten it to actually publish a movie is to use the "instant movie" process which took about 14 hours and was a cluster - none of the clips matched up - it jumped all over the place and repeated many of the clips but not anywhere near to the right sequence - didn't follow dates of the clips or the order I brought them in - more like a random slideshow of clips.
    I have tried un-installing nad re-installing, removing the media clips and then bringing them back in, burning to DVD, publishing to the computer - all I get is errors.   And the errors vary and vary at the point in the process - sometimes right at the beginning - sometimes 7%, 32%, 61% adn made it once to 83% only for it to die with an Error Compiling Movie.  Unknown Error.
    I am running it on a monster machine -   Intel i7 CPU 970 at 3.2 GHZ, 12 GB ram, 64 Bit OS, Windows 7 Ultimate, and have over a Terabyte of free space on the HDD the application is running from.
    I have re-run the same project on my old machine running Windows Movie maker and it ran perfectly first run.
    I wish I would have read the Adobe boards on all the issues with this software prior to buying.  I have seen some comments that PE7 works much better than 8 - does anyone know if Adobe will allow you to downgrade/

  • General Export Error 301 while running syndication batch

    Hi
    When I run the syndication batch for the map of the Customer repository I get an error "General Export Error 301 ".Has anyone faced this problem.Is any configuration needed to be done.The syndication server is running fine..
    Is there any blog related to this..
    Points will be awarded for useful answers.
    Thanks in advance

    Hi,
    You have given port no 2015. Are you sure that the port no of the repository from which you are going to syndicate data is correct.You can check the port no of any MDM repository using MDM console.For this you have to click on the mounted MDM server name.It will display the list of all repositories available on that server with their port numbers.Please confirm port no. is correct.
    Also confirm that you are using client system code instead of the client system name.IN addition to this,also check
    &#9679;      Is the target MDM repository loaded?
    &#9679;      Is the port type Outbound?
    &#9679;      Is the port’s Processing property set to Automatic?
    &#9679;      Is the port connected to a Syndicator or other MDSS?
    &#9679;      Do the Login and Password values in the mdss.ini file match the Login and Password values for the repository on the MDM Console
    You can try one more thing, Just give the command with <b>"-l" option</b>
    Hope it will help you.Revert back if you have further queries.
    Thanks,
    Shiv.

  • Lightroom 1.1 Export Error

    I just upgraded to Lightroom 1.1. Now I can't export. I get an export error message pop up.
    I have tried to exporting from a file (left menu) and from collections (left menu). Both render an export error message.
    When trying to export 16 photos, here is the message I get:
    "An error occurred while exporting. 16 folders failed to export."
    Am I missing something here? It worked really well in V1.0.

    I am also having problems with 1.1 and exporting. I attempted to batch about 3,000 RAW files to JPG the other day. I selected the folder and chose my export settings. Then it began to churn through them as normal. The goofy thing is that when they finished about 3hrs later only 250 of the 3000 were on the disk. LR gave me an error, "Unable to export 25xx pictures" with no other information. I have about 300gb free on the disk and am using a Inspiron 1705 with 2.2ghz core 2 duo and 2gb of ram. I don't understand why it would continue to act like its exporting when it really wasn't? Oh! not to mention I have been getting the OUT OF MEMORY upside down in red with 1.1 as well!

  • How to create a UNION between two custom folders

    Hi all, I have two different dataset based respectively on two custom folders: CF1 and CF2
    The first custom folder (CF1) is joined with a custom folder called Groups and retrieve the amount of tickets_id which are owned by the groups.
    The second custom folder (CF2) is joined with another custom folder called User and retrieve the amount of tickets_id which have been created by the users.
    This two sets, as you have understood are independents and not correlated, because the two different amount of tickets_id follow two different logics....
    However, now I need to have a single field called TICKET_ID which is the UNION (not UNION ALL) of all tickets_id retrieved by CF1 and CF2
    I tried to use a complex folder...but it showed always two distinct fields...instead I want to merge the two dataset into a single field called TICKET_ID
    Is there a way or a workaround to resolve this problem ???
    Thanks a lot in advance
    Alex

    Hi Rod, just an explanation...
    I red and follow the threads you mentioned in your previous mails and I'm using the context.
    I summarized what I did
    1) I created the context and the package (with the 2 functions inside)
    2) I created on the Administrator a custom folder with the following sql:
    select vl.user_id,g.group_id
    from apps.jtf_rs_emp_dtls_vl vl,
    apps.jtf_rs_group_members_vl g
    where g.resource_id = vl.resource_id
    and (g.delete_flag = 'N' AND vl.end_date_active IS NULL)
    and g.group_id = COMPLAINTS_GET_GROUP_ID(SYS_CONTEXT('DISCO_CONTEXT','GROUP'))
    where COMPLAINTS_GET_GROUP_ID is the package name which contains the 2 function SET_CONTEXT and SHOW_CONTEXT, even if I use directly the SYS_CONTEXT function....
    3) Inside my workbook I have 2 sheets and one parameter (called GROUP):
    a. inside the first sheet I created the calculated field which set the parameter value with the following code : SET_CONTEXT('GROUP',:GROUP)
    b. inside the second sheet I show the list of user_id retrieved from the select above
    This mechanism works perfectly, even if the refresh of the parameters on the first sheet is mandatory to see the right data on the second one. But this works ONLY if my parameter GROUP has ONLY one value....
    Now I have the necessity to pass to the select a LOV of groups !
    Reading the previous threads I saw that there are two ways to solve this problem: (Re: Parameters in SubQuery
    a. - join your subquery to you list of values folder. If you have a parameter that is based on a LOV then there will be a folder that defines the LOV. You should be able to join the subquery folder to the LOV folder either in the EUL or in a custom folder and use the parameter to select from the LOV folder.
    I can't use this option because inside the same custom folder I need to have a UNION of 2 different select with their separated joins
    b. use multiple parameters, so you define a fixed number of optional parameters, say, PARAM1,PARAM2,PARAM3,PARAM4 and PARAM5. Then set them in a separate workbook and then use a condition col IN (SYS_CONTEXT('NAMESPACE','PARAM1'), SYS_CONTEXT('NAMESPACE','PARAM2'), SYS_CONTEXT('NAMESPACE','PARAM3'), SYS_CONTEXT('NAMESPACE','PARAM4'), SYS_CONTEXT('NAMESPACE','PARAM5'))
    This solution is very interesting but I didn't understand how to implement it (remember that I have only one parameter "GROUP" with more than on value).
    How can I modify the calculation and the condition inside the select ?
    Thanks a lot

  • SQL query to find all the custom folders in Discoverer (query posted)

    I know its not a question I am posting..this is just to inform community users that this query makes life easier in case someone wants to find out all the custom folders in a particular EUL (folder name starting with XX)
    select b.ba_name,f.obj_name folder_name,f.obj_id,f.obj_ext_owner Owner
    from
    APPS.EUL5_objs f
    , APPS.EUL5_ba_obj_links l
    , APPS.EUL5_bas b
    where 1=1
    and f.obj_id= l.bol_obj_id
    and b.ba_id= l.bol_ba_id
    and b.ba_name like 'XX%'
    order by b.ba_name,f.obj_name;
    Hopefully it would be useful to others!

    Connect as sysdba and try..
    To list all objects >100M in size.
    SQL> select owner, segment_type, segment_name, sum(bytes)/(1024*1021) from dba_segments
    group by owner, segment_type, segment_name
    having sum(bytes)/(1024*1021) > 100
    For tablespaces ..
    select tablespace_name, sum(bytes) tablespace_size
    from dba_data_files
    group by tablespace_name
    union all
    select tablespace_name, sum(bytes) tablespace_size
    from dba_temp_files
    group by tablespace_name
    order by tablespace_name

  • Export-Error Message EXP-00003

    Dear List
    I'm using Oracle 9.2.0.5 on Windows.
    Seventeen Tables in the schema have Spatial-Columns (MDSYS.SDO_GEOMETRY).
    I try to export the schema.
    For 2 tables the Exp-program gives the error message EXP-00003.
    When I set all spatial-values in these tables to null by an UPDATE-Statement the Export-Error still occures.
    When I drop the spatial-column and then reintroduce it the Export-error disappears.
    The error comes back, after filling the spatial-column with data again.
    Documentation says:
    EXP-00003 no storage definition found for segment(number, number)
    Cause: Export could not find the storage definitions for a cluster, index, or table.
    Action: Record the accompanying messages and report this as an Export internal error to Oracle Customer Support.
    Any suggestions?

    You could be using a older version (9.2.0.4) of the export utility.
    Check note 274076.1 on metalink for details.

  • Error  while running custom BI report in R12.1.1

    Hi All,
    We are encountering below error while running custom BI report in R12.1.1...
    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Enter Password:
    MSG-00001: started report
    REP-1401: '': Fatal PL/SQL error occurred.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-1401: '': Fatal PL/SQL error occurred.
    Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
    Please let us know how to fix this error.
    Thanks
    Praveen

    Hi Praveen,
    Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
    REP-1401: '': Fatal PL/SQL error occurred.

  • Adobe application manager - download error. please contact customer support

    trying to download cc apps to my laptop (my second computer) - mac os 10.8.3 - safari browser (failed w/ firefox too)
    been having this issue for a couple months... want to clear it up befor the new cc releases
    so I just uninstalled and removed all adobe apps from my computer - including the adobe application manager
    restarted my computer (shut down my desktop) - downloaded the 'new' adobe application manager
    tried to log in and got the following error (same error I have been getting for months)
    adobe application manager - download error. please contact customer support

    I renamed the OOBE folder to OOBE_old
    but I cannot find the opm.db file -
    I do not seem to have a library in my user h2oonstone folder...
    I did search the HD for the opm.db file - says nothing found

  • Adobe media encoder export error  "writer not found"

    When trying to export to wmv using adobe media encoder I get an export error of "writer not found". I did a search and found others having the same issue with no fix as far as I can see. Just wondering if anyone has any more iformation on this. I'm using Vista Ultimate and Premiere CS3.
    Thanks

    I registered the WMEncoderHelper.exe file with regserv, but I still get
    the "writer not found error". I wish I knew what codec it is trying to find and use.

  • Quicktime Export Error: "An output module stopped responding."

    I'm experiencing an odd export error whenever I use any Quicktime codecs:
    "After Effects error: An output module stopped responding. The file may be damaged or corrupted. You may need to restart After Effects."
    Similarly, Adobe Media Encoder hangs when outputting to Quicktime codecs. Neither program makes any progress at all before the hang occurs. At that point, I have to manually "end task" to exit. Also, it doesn't seem to matter what I try to export. In AME, for example, I can simply try to convert one video format to another and have it hang, so I don't think the problem is due to a problem with the source settings or effects. Also, I'm not attempting any multiprocessing since I don't really have enough RAM for that. Other output modules work, so I'm just exporting image sequences for the time being.
    System specs:
    Windows 7 64-bit
    Intel i7-2600k processor
    8 GB RAM
    GTX 580 GPU
    Software:
    Adobe CS6
    AE Plugins include Tracode Suite 12 and Optical Flares
    Quicktime 7.7.3
    Any thoughts on this? I've seen very few references to this error in other places, and not really found a solution that seems to apply to my situation. Thanks in advance for your help.
    Josh

    Thanks for setting me in the right direction. Clicking through to the 25 :: 101 error page (http://myleniumerrors.com/2013/01/06/25-101-4/) led me to a reference about other software, such as remote access software, using the same ports that AE needs for communication with its various processes. In my case, LogMeIn was the culprit. I had no idea that AE even used TCP for these types of operations, so that's very helpful to know.
    *EDIT*
    That worked temporarily, and now it doesn't work. I ran into a similar effect when I first disabled the Windows Firewall. But of course, as I type this and piddle around, it works again. It SEEMS like if I open AME and click into the output settings and scrub through the video preview, it makes everything work when I go to actually export. That's exactly the type of thing I would say is completely unrelated under normal circumstances, but at the moment all I know is that it is currently working and I don't want to test anything else until I finish the rendering I need to accomplish today. I'll work on it more later and post an update at that time.
    Thanks,
    Josh

  • PE 7 memory and export errors

    In Premiere Elements ver 7, I have put together a 4 1/2 minute video made up of mpeg4 HD 720p mixed with regular avi digital footage. I am having memory errors and export errors when trying to render into a wmv or mpeg file.  When working on previous videos with non-HD footage, I didn't have these issues. I also recently put together a 1 minute mpeg4 HD 720p video rendered into HD 720p wmv file without any issues.
    1) memory errors - I got these when I was putting the video together and when rendering. After a lot of restarting the PC and reworking the video, I was able to finally complete in pre-render format.  It includes music soundtrack and transitions/effects.
    Here are my PC's specs:
    Dell Inspiron 530 with Intel Quad Core CPU 2.66Ghz processor
    4 GB RAM
    32 bit OS
    Windows Vista SP1
    When rendering, I get the "caution - low memory, save your work" message. I have since set the virtual memory paging file size per Technote kb404939.  This seems to have helped a little bit but still getting the message even though it continues to render....but then I get the export error message....
    2) Export errors - I first tried to render into a wmv HD 720p 30fps file. In the first 1 of 2 rendering phase, I got the "Export Error - failed to return a frame - cancelling operation" message. I checked for gaps in the timeline and there are none. Even though I do have some black space/dip to black sequences, I can "page down" through the entire movie without any pauses or hiccups with the CTI (Current Time Indicator).
    I then tried to render into a smaller wmv LAN speed file, and it went through the first 1 of 2 phases rendering (with the low memory message but it kept on going). Just after it started into the 2 of 2 rendering phase, I got an error message saying "Export Error - Unknown Error".
    What to do? I'm very frustrated at this point after a great deal of time invested in this video and troubleshooting the issues. Please help. Thanks.

    What are the sources of your video? What types of camcorders did this video come from?
    Premiere Elements supports AVCHD video, but does not work well with video from Flip and webbie camcorders, which use proprietary codecs. They can also use non-standard frame rates. Conversion is usually necessary before the files can be edited in Premiere Elements.
    And does your DV footage come from a miniDV camcorder captured over FireWire? And what project settings are you using in Premiere Elements.
    I would also not recommend mixing HD and DV footage in the same project. This could also be contributing to your problems.
    I also recommend you visit Windows Update and manually download any (even non-critical) updates. Vista should be at least on SP2. You may also want to download the latest version of Quicktime.

  • Question - are we not able to create indexed items in custom folders?

    Just a question here. I would like to use the index/Value option for parameters in a workbook. This is where the List of Values drop down box for the parameter would show both the index number and the value and let you choose to select based on the index or on the value. An obvious example of this would be with months, where you would have January (1), February (2), March (3), and so forth. To do this, you have to set up indexed items in Discoverer Administrator.
    That is where I am running into a problem/issue. I am not being able to pick an item and click to look at its properties, scroll down to the Indexed Item property, click on that property, and get a list of items to pick from. On the indexed item property I see a value of <None>, and when I click on that property, no list of items pops up.
    I have defined indexed items before, but that was always done on regular folders (imported from the database). In this case, I am working with a custom folder.
    The SQL that I have keyed in for this custom folder is this -
    SELECT flex_value, description, flex_value_set_id, flex_value_id
    FROM fnd_flex_values_vl
    WHERE flex_value_set_id = 1011187
    ORDER BY flex_value;
    FND_FLEX_VALUES_VL is an Oracle view, that combines Oracle tables FND_FLEX_VALUES and FND_FLEX_VALUES_TL.
    My goal would be to show both the FLEX_VALUE and the DESCRIPTION in the parameter to the users, so they can better decide what value(s) they want to pick. This is a general ledger application that I am working with, with the General Ledger account number segments and the Flexfield value set for each segment (we are using 7 segments to define our general ledger account number).
    Am I not able to define indexed items when working with a custom folder? The documentation is not real clear. It talks about simple folders and complex folders, but does not mention custom folders, at least that I can find. Or perhaps I need to do something different with how I code the SQL for the custom folder to enable me to define indexed items in the custom folder?
    Hope this makes some sense. Always a challenge to explain the situation in a clear manner. Thanks for any insight/assistance anyone can give me on this.
    John Dickey

    Ahh, those picky little details. Once I created an Item Class LOV on my item, then I could click on the Indexed Item property and get the list of fields in the folder to show up and pick my item (to be the indexed item) from that list. I went back to the user guides and the documentation sure does not indicate this requirement. For example, in the Discoverer Administrator guide, you have the section (page 9-30 in the version I have) titled "How to assign an indexed item to an item". Nowhere in that section does it say that you have to create an Item Class LOV first to be able to do this. Though it does show how if you do not have an LOV on the item you pick to be the indexed item, you will be prompted to create an LOV for that item. In the past I had my LOVs created first. This time I was trying to do the indexed item first before creating my LOVs. So lesson learned - you have to create an Item Class LOV first before you can assign an indexed item to an item.
    Thanks for the assistance.
    John Dickey

  • Error while creating customer account sites from backend

    I am creating Customer Account Sites using the TCA API from Toad.
    I am getting the following error
    The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.
    The Operating unit has been defined.
    I am using the following code:
    DECLARE
    p_cust_acct_site_rec hz_cust_account_site_v2pub.cust_acct_site_rec_type;
    x_return_status VARCHAR2(2000);
    x_msg_count NUMBER;
    x_msg_data VARCHAR2(2000);
    x_cust_acct_site_id NUMBER;
    BEGIN
    p_cust_acct_site_rec.cust_account_id := 9462;
    p_cust_acct_site_rec.party_site_id := 5473;
    --p_cust_acct_site_rec.language := 'US';
    p_cust_acct_site_rec.org_id := 126;
    p_cust_acct_site_rec.created_by_module := 'TCA-EXAMPLE';
    hz_cust_account_site_v2pub.create_cust_acct_site(
    'T',
    p_cust_acct_site_rec,
    x_cust_acct_site_id,
    x_return_status,
    x_msg_count,
    x_msg_data);
    dbms_output.put_line(SubStr('x_return_status =
    '||x_return_status,1,255));
    dbms_output.put_line('x_msg_count = '||TO_CHAR(x_msg_count));
    dbms_output.put_line(SubStr('x_msg_data = '||x_msg_data,1,255));
    IF x_msg_count >1 THEN
    FOR I IN 1..x_msg_count
    LOOP
    dbms_output.put_line(I||'. '||SubStr(FND_MSG_PUB.Get(p_encoded =>
    FND_API.G_FALSE ), 1, 255));
    END LOOP;
    END IF;
    END;
    Thanks and Regards,
    K tanna

    Duplicate post.
    Error while creating customer account sites
    Error while creating customer account sites

Maybe you are looking for