Evaluation period expired, but...
Ok, here's my problem.
I downloaded vision NI software from this site, knowing it had a 30 days evaluation period, but not knowing we had the NI VISION cd at our laboratory. The software was asking for some VIs which i installed from the NI vision cd afterwards. Now, 30 days later, even though we own a fully registered version of labview, it won't let us use any vision VI, including those coming with the CD, saying that the evaluation period is over.
Is there anything I can do to solve this issue with formatting the computer? Is there anybody to contact who could send me a liscence key, or whatever else?
Thanks in advance.
If you have LabVIEW 7 or higher and the according IMAQ Vision
version, then you indeed need to activate the software even when
you install it from your CD Rom.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions
Similar Messages
-
Hi all,
I am using Xilinx 10.1 webpack... while i am compiling the code, the following error occur. Please any one guide me to
clear the error..
ERROR:Par:332 - The evaluation period for this evaluation software has expired. As stated in the guidelines of the
Evaluation Agreement, which was shipped to you along with the Evaluation CDs, this software will no longer operate.
We are eager to assist you as you conclude your evaluation of the Xilinx solution. Your local Field Applications
Engineer or salesperson is available to answer any questions or to assist you in the purchase of an annual software
license. You may also contact Xilinx directly at [email protected]
Thank you for evaluating the Xilinx solution. We appreciate your interest in Xilinx and we look forward to earning
your confidence and your business.
Process "Place & Route" failedHi mwilliams2684,
According to your description, you used SQL Server 2012 volume license edition on your VMware Vcenter server. Then error message “Evaluation Period Expired” was thrown out in the logs.
Firstly, as other post, we need to verify if you have installed SQL Server Standard 2012. There are other ways to review the version of SQL Server, please refer to this article: How to tell what SQL Server version you are running (http://www.mssqltips.com/sqlservertip/1140/how-to-tell-what-sql-server-version-you-are-running/).
Besides, error “Evaluation Period Expired” usually occurs when we are running an evaluation instance of SQL Server and the evaluation time period has expired. For detail information, please refer to this article: "Evaluation period has expired"
error message when working with SQL server (http://support.microsoft.com/kb/971268).
Finally, for more detailed information regarding to the license issue, please call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use
the Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
Best regards,
Qiuyun Yu -
The evaluation period of this instance of Microsoft sql server reporting services has expired
Hi All,
When i am trying to open power view report in Event log getting below error:
"The evaluation period of this instance of Microsoft sql server reporting services has expired: but how can we know which server ssrs has been expired..
please help me on this ...
Regards,
Jithendar.
Hi Jithendar,
For your issue, you can retrieve the SQL Server Evaluation Period Expiry Date to varify which server SSRS has been expired:
SELECT
create_date AS 'SQL Server Install Date',
DATEADD(DD, 180, create_date) AS 'SQL Server Expiry Date'
FROM sys.server_principals
WHERE name = 'NT AUTHORITY\SYSTEM'
Reference:
http://www.mssqlgirl.com/retrieving-sql-server-2012-evaluation-period-expiry-date.html
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
Evaluation Period has expired - SQL server Management Studio
I am new to this environment and I have an issue with SQL studio management – it says
“Evaluation period has expired. For information on how to upgrade your evaluation software please go to
http://www.microsoft.com/sql/howtobuy”.
The questions I have are :
1. How do I know what version of SQL I am running ?(since I cant go through studio management)
2. I can see sql server 2008 r2 on the program files- does that mean SQL management studio is 2008 R2?
3. How do I upgrade to a proper version ? – Is it through “installation center “ on program files ?
4. Will the upgrade stop any SQL services?
Many thanks guys – Im fairly new to sql troubleshooting – I have only done direct installations in the past.
Regards, MassonTechHi Guys
Many Thanks for your reply.
I have managed to find the version of SQL server 2008 R2 running through the registry and it says :
Edition: Standard Edition
Edition Type : Standard Edition
But i can not find any indication that an evaluation copy was initialy installed. - I have been asked to suggest an upgrade path. My question is ? am i upgrading just SQL management studio ? or SQL server 2008 R2.
Also , if SQL is expired - i presume something should stop working (in terms of database etc) But in my enviroment - everything seems fine except the error message when you try to lunch SQL management studio.
Regards, MassonTech
I guess you have multiple instances or versions of SQl server installed on your machine.Please use below link to run a discovery report and paste result here so that we can understand
http://blogs.msdn.com/b/petersad/archive/2009/11/13/sql-server-2008-discovery-report.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
I have performed the above, please see below the output - Please could you advise on what next?
Product
Instance
Feature
Lanugauge
Edition
Version
Sql Server 2008
DAV01
Database Engine Serveices
1033
Standard
10.0.1600.22
Sql Server 2008
DAV01
SQL Server Replication
1033
Standard
10.0.1600.22
Sql Server 2008
DAV01
Analysis Services
1033
Standard
10.0.1600.22
Sql Server 2008 R2
Management tools basic
1033
Enterprise Evaliation
10.50.1600.1
Sql Server 2008 R2
Management tools Complete
1033
Enterprise Evaliation
10.50.1600.1
Sql Server 2008 R2
Integration Services
1033
Enterprise Evaliation
10.50.1600.1
Regards, MassonTech -
Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003 -
Error while running maintenace plan "Integration Services evaluation period has expired."
We are getting below mentioned error while executing SSIS package or maintenance plan.
Executed as user: ICROSSING\*****. Microsoft (R) SQL Server Execute Package Utility
Version 11.0.3381.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.
Started: 3:35:00 PM Error: 2014-02-23 15:35:01.56
Code: 0xC0000033 Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Error: 2014-02-23 15:35:01.58
Code: 0xC0000033 Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Could not execute package because of error 0xC0000033.
Started: 3:35:00 PM Finished: 3:35:01 PM
Elapsed: 0.671 seconds. The command line parameters are invalid.
The step failed.
We have license BI edition of sql server 2012. Other services and database are working fine. Issue with integration service only.
Please help me sort out the issue.
Thanks,
Shitalkumar KasliwalHi Shitalkumar,
The issue may occur if Evaluation Edition or CTP Edition of SQL Server was installed earlier on the server, however, the previous instance of SQL Server was not uninstalled completely or upgraded to Business Intelligence Edition successfully. To resolve
the issue, modify the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\110\ConfigurationState registry key value from 1 to 3, and then rerun the Edition Upgrade procedure from the SQL Server install media to upgrade the SQL Server components to the
licensed edition again.
Reference:
http://support.microsoft.com/kb/971268
Regards,
Mike Yin
TechNet Community Support -
SQL Server 2012 Standard saying its Evaluation period has expired
We installed SQL 2012 Standard on a server and have since created a 1TB SQL server database. Suddenly, we started receiving an error when opening the SQL management Studio that our evaluation period has expired. We purchased 2 licenses of Standard
2012 and installed it on two servers. One is working fine, and the other is saying it had an evaluation copy.
According to our VLSC account, there isn't a product key required, so I can't run the edition upgrade to upgrade it to standard. Is there a way we can get the license converted without risking the 1TB database we created?Hello,
Sometimes the media provided when you buy the licenses have the product key prepidded. You may find the product key shows by itself
when you reach the Product Key page of SQL Server setup. Please try that?
An edition upgrade won’t delete any data or configuration of the SQL Server instance. Please read the following article:
http://www.sqlcoffee.com/SQLServer2012_0015.htm
In some cases, even when you have performed an edition upgrade to a licensed edition, you still get that evaluation edition error message.
If that is the case, please read the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/9e50de75-6119-4963-8d5e-9d8b0367bc8e/evaluation-period-has-expired-sql-2012-ssms?forum=sqlsetupandupgrade
(Allen Li)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Windows Server 2008 - Activating 180 evaluation period
I recently installed an evaluation copy of Windows Server 2008 which I downloaded from the Microsoft evaluation website. I did not immediately go through any activation process. I wasn't clear about the process previously but have attempted to activate
the software now as it now indicates that the Windows license is expired and the copy of Windows is not genuine. The issue I have with attempting to activate my copy is that the server is located on a private network where I do not have online access. There
does not appear to be any other option available to complete the activation.Hi,
Regarding the issue here, please check the below KB article to see if it could help:
How to extend the Windows Server 2008 evaluation period
http://support.microsoft.com/kb/948472
Also please check the thread below for more information:
http://social.technet.microsoft.com/Forums/en-US/1892a04d-0961-4046-b8dd-6518a13784bf/never-received-activation-code-for-180-day-eval-of-windows-server-2008?forum=winservergen
Hope this helps
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Contract Validity period expired throw error message?
Hi All,
We created the contract and its validity date expired but the system allows to create the sales order with warning message that that validity of contract expired.
We need here error message so that the system should not allow to create the sales order with reference to that contract.
Regards,You can try this.
Go to OVA2, select "A-Sales Header" and double click on Procedures. Again select "10-Inquiry/Quotation" and double click on Fields. Now tick the box "Warning" for VBAK / BNDDT
thanks
G. Lakshmipathi
ps:- It has been observed that out of total 15 questions you posted, you have not responded properly for 9 threads which are still open. Please develop the habit of updating the forum periodically as and when you post any questions. It is the other way to show that you respect forum members time. -
Prod Server ! Reporting Services evaluation has expired .
Hi all ,
Mistakenly evaluation period sql server 2012r2 was installed on our production server. Can't afford down time .
I have the full version product key with me
Am getting the below error
Microsoft.ReportingServices.Diagnostics.EvaluationCopyExpiredException: , Microsoft.ReportingServices.Diagnostics.EvaluationCopyExpiredException: The evaluation period
for this instance of Microsoft SQL Server Reporting Services has expired. A license is now required.;
Kindly let me know what all steps and precaution needs to be followed.
Thanks in Advance
PriyaHi Sir ,
So once i upgrade keeping in mind that there will be downtime .
Do i also need to do these 2 workarounds as the version has already expired its not nearing expiration .
1. Install Service Pack 1 before upgrading SQL Server 2008 evaluation edition to any licensed edition.
2. Modify Registry. Go to Start->Run->Regedit. In the Registry Editor, select the following keyHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\ConfigurationState and change the value
of the Common Files REG_DWORD to 3 as shown in the figure below.
Or a simple upgrade is sufficient enough for the restoration of all the functionality .
Thanks Priya -
Hi,
In vendor evaluation, How system calculates from and To date?
Example, Vendor is evaluated yearly twice such as september and March Months.
First evaluation happened in the september,on that time system takes current date.Next evaluation happened in March month on that time system takes current date .Here current date means TO date ,
Hence any Validation should be between the periods only.
but which date system consider the From date?
Thanks in advance.
Kumar.Hi,
Perhaps my answer was not very clear, but the months I chose were just an example.
What I try to explain is that you cannot set a "from" period in vendor evaluation. An evaluation covers all data that exists for the vendor, this is because it is important to get an accurate score. To select when the evaluation was to start from would have a negative effect on the score for the vendor.
What you can do is search for vendors not evaluated since (ME6D) and enter a date yourself or before you carry out your evaluations download all the scores to a spreadsheet to record the improvement.
Where Date Evaluation created = ELBK - LEBDT and overall score = ELBK - GESBU.
The document below is excellent to understand whole process.
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/8d/b985b0414511d188fc0000e8322f96/frameset.htm]
Thanks. -
HELP! URGENT - You have exceeded the evaluation period of this product?!
Hello Experts,
I am having a huge issue here. Our analysts have been receiving this error as of last night and as a result no one can connect to SCSM, this is a really big problem as we cannot provide support until it is fixed.
Upon login, users are getting an error "Failed to connect to server xx.xx.xx.xx"
When reading the details of the error I notice it says I have exceeded the evaluation period of this product - We have not installed the evaluation edition but registered with a serial #...
How can I fix this and get our system back up?
Details of error:
Microsoft.EnterpriseManagement.Common.UnknownServiceException: The service threw an unknown exception. See inner exception for details. ---> System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to System.UnauthorizedAccessException: You have exceeded the evaluation period of this product. For information on purchasing the retail version of this product, go to http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)).
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ServiceManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, EnterpriseManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.ServiceManagementGroup..ctor(ServiceManagementConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.Credentials.ManagementGroupConnection.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to System.UnauthorizedAccessException: You have exceeded the evaluation period of this product. For information on purchasing the retail version of this product, go to http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)).
Thanks in advance.I got this fixed by downloading this tool and re-entering my product key: https://drive.google.com/file/d/0B9DOC059xKJgcXBXV3lRRnp6ZW8/edit?usp=sharing
found it on this post:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/bdcdae43-a4c8-4256-88e9-7f128d078eec/scsm-2012-installing-product-key
People will recommend not using this but it worked for me and countless others.... that being said I am NOT responsible for any loss of information or corruption. I only used this because I had constant backups every day to fall back on if this did any damage
(fortunately it didn't).
Of-course Microsoft wants you to open another support case so they can make more $$ just to offer you the same tool. Hope anyone who experiences this issue finds this post. Have a great day. -
Sql server 2012 evaluation edition expired
Hi Gurus,
sql server 2012 evaluation edition expired,
Here i don't have any backups and when i browsed few blogs suggest to upgrade to another edition from Evaluation edition.
1)Do upgrading the edition keeps all the user databases the same and how about the logins and jobs and other data in system databases.
2) Am having a developer edition 2012 can i attach the data files ( .mdf ) to the instance using attach database method from Evaluation Edition Instance 2012 to Developer Edition 2012.
3)If i uninstall the Evaluation edition 2012 can i have any loss of data.
4)Please suggest me the best practice if any thing available.
Thanks in advance..Hi Gurus,
sql server 2012 evaluation edition expired,
Here i don't have any backups and when i browsed few blogs suggest to upgrade to another edition from Evaluation edition.
1)Do upgrading the edition keeps all the user databases the same and how about the logins and jobs and other data in system databases.
2) Am having a developer edition 2012 can i attach the data files ( .mdf ) to the instance using attach database method from Evaluation Edition Instance 2012 to Developer Edition 2012.
3)If i uninstall the Evaluation edition 2012 can i have any loss of data.
4)Please suggest me the best practice if any thing available.
Thanks in advance..
Lets take your question point wise
1. In place upgrade will take care of all Logins,jobs and other objects. But before running inplace upgrade its advisable to run SQL Server upgrade advisor
2. Yes you can do it perfectly. As Erland said this will not transfer logins and you might have
orphaned users
3. Since Eval edition has expired and if you uninstall it you might loose all data. This is not a correct approach please either do an in place upgrade to licensed version( like developer edition) or first install developer edition and move database by backup
restore or attach detach method. I would say to use inplace upgrade.
4 Best practice would be to do an inplace upgrade. Since Developer edition is same as enterprise and Evaluation edition you dont need to worry about features. Just run the Developer edition setup by running setup.exe file and then select maintenance on window
which pops up in maintenance select edition upgrade and then follow the process to upgrade evaluation to developer edition. Below link would help
http://www.sqlcoffee.com/Troubleshooting073.htm
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Apply password period expire policy to resource accounts
Hi! In IDM 7.1 I know can apply Password Period Expire Policy to Lighthouse account. It's simple and It works so well.
But, I ' d like to know how can I apply a password period expire policy to resource accounts to synchronize as Lighthouse as resources accounts (i.e. LDAP accounts, etc.).
I knew in previous versions of IDM wasn't possible.
Thanks.Figures the solution form my own Q....
I had pass through configured with LDAP to a login module group - which had the following as the order.
1. LDAP
2. IDM
As LDAP resource adaptor does not support expiry, we have to look for the IdM Expiry. so i reversed the order so that IdM takes precedence in resolving the value of 'loginwarning" on the end user dashboard.
Anyways in my environment, All password resets are handled from IdM so the Pass through wont hurt. -
You have exceeded the evaluation period of this product
Microsoft SQL Server 2012
MSSQLSERVER
MSRS11.MSSQLSERVER
Reporting Services - Native
1033
Standard Edition
11.0.2100.60
No
I am getting you have exceeded the evaluation period error every time I try and log into our reporting service url. I am able to access SQL Server just fine it is only Reporting Services I am having issues. Can anyone
let me know the best way to resolve it. This is the full error"
An error occurred when invoking the authorization extension.
(rsAuthorizationExtensionError)
Get Online Help
You have exceeded the evaluation period of this product. Please upgrade to
the retail version to continue using the product. For information on purchasing
the retail version of this product, go to
http://go.microsoft.com/fwlink/?LinkID=74446.Product
Instance
Instance ID
Feature
Language
Edition
Version
Clustered
Microsoft SQL Server 2012
MSSQLSERVER
MSSQL11.MSSQLSERVER
Database Engine Services
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSSQL11.MSSQLSERVER
SQL Server Replication
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSSQL11.MSSQLSERVER
Full-Text and Semantic Extractions for Search
1033
Enterprise Edition
11.1.3000.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSSQL11.MSSQLSERVER
Data Quality Services
1033
Enterprise Edition
11.1.3000.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSAS11.MSSQLSERVER
Analysis Services
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
MSSQLSERVER
MSRS11.MSSQLSERVER
Reporting Services - Native
1033
Enterprise Edition
11.0.2100.60
No
Microsoft SQL Server 2012
Management Tools - Basic
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Management Tools - Complete
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Client Tools Connectivity
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Client Tools Backwards Compatibility
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Client Tools SDK
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Integration Services
1033
Enterprise Edition
11.1.3128.0
No
Microsoft SQL Server 2012
Reporting Services - SharePoint
11.1.3128.0
No
If you notice correctly you can see your SQL server reporting service is not patched to SP1.I would recommend you to first apply SP1 for reporting service and then try to follow advise mentioned in below article.
It is same which Allen Li pointed
http://support.microsoft.com/kb/971268
I am not sure this could be workaround but you should give it a try.
There are 2 reporting services mode running one is sharepoint integrated and other is native try upgrading native and can you please tell which one is giving the error.
Also if you see the screenshot pasted by you one has stand edition other has enterprise .Is is correct ?
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Maybe you are looking for
-
Select- Color Range- Results in Blue Screen (PC) (driver out of date)
I've been using the CS6 beta about two days. While experimenting with color range I experienced two consecutive blue screen crashes. The first time it happened,I was working with the color range selector and was replacing the selected areas with an
-
Why "not authorized to play it on this computer" + other problems
I just bought my first song for my first iPod (a 16GB iPod touch). I am very impressed with the hardware, but I am already extremely disappointed with Apple and iTunes. iTunes is one of the least intuitive applications I have ever used. One among the
-
SSRS 2012 Report Manager web browser display issues
Hi Guys I'm having a issue with the report manager display in explorer, Firefox and chrome web browsers, it doesn't display correctly, any advice would be greatly appreciated, thanks
-
I am using HFR 7.2 , I have a grid that retrieves data from Essbase , here I am getting negative sign for all the datavalues, Can anyone tell why I am getting the -ve sign. Does I need to change any option. Can anyone tell me the different reasons wh
-
Deadline: 22 May 08H00 Help ME Please Scrolling a movie clip from the Centre
Hi It has been a while since I have been here I am in need for some serious help, I am so frustrated. What I want to do is pretty simple, I am building a DJ website and the navigation is a pitch controller, similar to what they have on a mixing board