Event ID 1001 Bug check Occurred, After updation of Kaspersky Windows 7

Hi,
Recently I have updated my Anti Virus Kaspersky 10 on my Windows 7 Ultimate System 32 bit. After that it restart automatically again and again. Then i restore it on Last known good configuration. It resolve the issue. In event viewr i found out the
Error 1001 Bug check ..
I exactly want to know that what happened to my system . For this How can i send my dmp files to support team .
I have face the problem non my multiple systems but not all .. .
Please guide me asap .

The following log occurred
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000c9 (0x0000024d, 0x9047b25a, 0x8d5ed0b8, 0x00000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041714-22230-01.
when i run verifier.exe
and select " Create standard Setting" then select "Automatically select drivers build for older version of windows" and press Next
it display the Kl1.sys driver
what does it means .. is there any problem with this file?

Similar Messages

TS3694 error -42110 occurs after update of itunes last friday 22-02-13

error occurs after updating iTunes last friday.
every time at startup error -42110 occurs.
is there a solution?

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

Why isn't my device showing up on either the sidebar or upper right hand corner of the screen? This has only occurred after updating to the new ITunes update?

Why isn't my device showing up on either the sidebar or upper right hand corner of the screen? This has only occurred after updating to the new ITunes update?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

Touch pad controls disappeared after update for Bootcamp windows 7

After updating Bootcamp for Windows 7 on my MacBook Pro 13" (Mid 2009), the touchpad lost its tap functionality and there, nolonger, is a touchpad tab in the Bootcamp Manager. Is there any way to reinstate the "tap to click" function?

Thanks, but what do you mean by Windows Support Software? ... the Windows 7 drivers, Windows 7 OS, or Bootcamp for Windows 7 ?

After update, Creative Cloud window empty

after update, Creative Cloud window empty

Hi natzoo1964,
Please follow the mentioned steps:
Windows:
C/Users/User Name/AppData/Local/Adobe/OOBE/opm.db and delete it.
Mac:
~/Library/Application Support/Adobe/OOBE/opm.db and trash it. (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html)
Launch CC desktop and try to sign in.
Regards,
Romit Sinha

Event 1001 Bug Check Windows 7 Ultimate 64-bit

Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 1/17/2014 6:56:51 PM
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: KT-PC
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000019 (0x0000000000000003, 0xfffff8a0245c2580, 0xfffff8a0245c2580, 0x73634946030c030c). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 011714-30997-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-17T23:56:51.000000000Z" />
<EventRecordID>389585</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>KT-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">0x00000019 (0x0000000000000003, 0xfffff8a0245c2580, 0xfffff8a0245c2580, 0x73634946030c030c)</Data>
<Data Name="param2">C:\Windows\MEMORY.DMP</Data>
<Data Name="param3">011714-30997-01</Data>
</EventData>
</Event>

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to skydrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem. The
work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

N8, unable to check-in after updating to ovi map 3...

I cannot use my check-in function as it keeps saying system error after updating the ovi map.
the version is 3.06 11wk10 b01 with map version 0.2.42.122.
my n8 is in PR 1.1 013.016
please help Nokia!
Solved!
Go to Solution.

Unfortunally I would recommend a factory reset of the device
You cant uninstall Ovi Maps 3.06, and if you get a system error its usually the software that isnt installed properly somehow.
If you dont already got it, download and install Nokia Ovi Suite from www.nokia.com/ovisuite
Start Ovi Suite and follow the guide to connect your phone.
Do a Backup of your phones content via Tools -> Backup (in Ovi Suite)(Be aware that e-mail accounts and programs might not be in the backup)
Disconnect phone from computer
On the phone press Call, then typ *#7370#
Phone will restart.(This will remove your personal content from Phone memory and Mass memory)
Set time and Date (and timezone) correctly on the phone.
Connect phone to Ovi Suite.
In Ovi Suite choose Tools -> Restore.
Restore your backup (I would advice you to not restore 'settings')
Try and download latest Ovi Maps via Ovi Store in phone.

Bug at "refresh after update "

I have an EO, PK (CODPEDV,CODPROD), with two (CANT_APROB, CANT_PROG) attributes defined as "Refresh after Update" in
the Attribute Settings of the EO, as they are being corrected by a Trigger on Update in the DB. all that is Ok;
but, What if my update involves the PK of the EO (CODPEDV)?, here's the result:
Error Message: JBO-26041: Failed to post data to database during "Update":
SQL Statement "BEGIN UPDATE ITEM_PEDIDO_VENTA ItemPedidoVenta SET CODPEDV=:1 WHERE CODPEDV=:2 AND CODPROD=:3;
SELECT CANT_APROB, CANT_PROG INTO :4, :5 FROM ITEM_PEDIDO_VENTA ItemPedidoVenta WHERE CODPEDV=:6 AND CODPROD=:7; END;".
As i suppose, the FrameWork is trying to bring the values back for the Attributes updated from the DB of a Row that
no longer exists (CODPEDV,CODPROD) , because was changed by the first sentence (CODPEDV). I'm Wrong??
Alex.
(I've already got a workaround for my case)
null

Yes, you're right. And it sounds like you already have a workaround.
Blaise

Bug Check Error on Exchange 2013: Microsoft-Windows-WER-SystemErrorReporting

This is the error which prompted the server to reboot:
Log Name:      System
Source:        Microsoft-Windows-WER-SystemErrorReporting
Date:          3/1/2015 9:27:00 PM
Event ID:      1001
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      exch13-02.domain.com
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000ef (0xffffe000f9bfc080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 030115-27921-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-02T05:27:00.000000000Z" />
    <EventRecordID>36389</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>exch13-02.SC.ESILICON.com</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">0x000000ef (0xffffe000f9bfc080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)</Data>
    <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
    <Data Name="param3">030115-27921-01</Data>
</EventData>
</Event>

Hi,
It seems like a Windows Server problem, not an Exchange Server problem.
What’s the version of your Windows Server and Exchange Server?
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/f132d246-7114-4223-9ff7-e72f3ade0708/exchange-server-2013-restarts-frequently-after-cumulative-update-3-is-installed?forum=exchangesvradmin
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Oracle report out of order after update Rollup for windows 2000 sp4

hi
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
thanks

Hi
first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
Thanks

Help! oracle report out of order after update Rollup for windows 2000 sp4

hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanks

I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this.

BSOD event 1001, bug check

<can someone help me what is the cause of it? it just happened a while ago and i got feared it will damage my pc..
n
System
Provider
[ Name]
Microsoft-Windows-WER-SystemErrorReporting
[ Guid]
{ABCE23E7-DE45-4366-8631-84FA6C525952}
[ EventSourceName]
BugCheck
EventID
1001
[ Qualifiers]
16384
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-04-20T23:40:42.000000000Z
EventRecordID
10197
Correlation
Execution
[ ProcessID]
0
[ ThreadID]
0
Channel
System
Computer
rustyevangelista
Security
EventData
param1
0x0000007e (0xffffffffc0000005, 0x0000000000000000, 0xfffff880031fbb08, 0xfffff880031fb370)
param2
C:\Windows\MEMORY.DMP
param3
042114-53539-01

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Prefered sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
Please note that any "cleaner" programs such as TuneUp Utilities, CCleaner, etc, by default will delete .DMP files upon use.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Problem occurs after updated to new mac os x 10.7.4

I Brought my first Macbook (15-inch) and 3 days before i updated my mac os x to 10.7.4
after installing the new mac os x,my mac is got slow its gettig time to stat and the others process like opening system preferences,adjusting volume,opening applications etc
so please give me an solution for it.
Best warm regards
<Email Edited by Host>

Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Then download and install the OS X Lion Update 10.7.4 (Client Combo) updater.

Quicktime does not preview and quit unexpectedly when opening a file. Occurred after updating to 10.8.4

Hey Apple Community! How are you guys? I got a problem please help me if you can:
Ever since I updated to 10.8.4 my Quicktime is acting up. It doesn't preview video or audio files, and quits when I try to open a file. Here are some screenshots.
It previews pictures fine, but audio and video files do not preview. I can't use Skype anymore either cause Quicktime is acting up. Look:
I cannot uninstall Quicktime because OSX says it's required and cannot be uninstalled. Look:
I have the latest updated software as well. I am sure a lot of us are having the same problem, what do you guy's think is the solution?
Thanks!
Peace and Love
Brian

Ever since I updated to 10.8.4 my Quicktime is acting up. It doesn't preview video or audio files, and quits when I try to open a file. Here are some screenshots.
QT and QL are related but different functional technologies. I would probably look for something common to both causing the problem. Normally, the first thing I would do is check to see if the problem is local to a single user account or is global. If global, I would initialize an external stratup drive with the same system and see if the problem is duplicated on that drive. (I.e., develop a troubleshooting process.)
It previews pictures fine, but audio and video files do not preview. I can't use Skype anymore either cause Quicktime is acting up.
Not a Skype user so I don't know anything about potential associated QT/QL problems.
I cannot uninstall Quicktime because OSX says it's required and cannot be uninstalled.
QT is actually a structure embedded in the operating system. As such, it cannot be removed/deleted. The QT X Player, on the other hand, is a GUI app used to access the embedded QT structure. Unfortunately, since users of previous versions of the QT X player have created self-inflicted problems by moving the app and/or accidentally deleting it, my guess here is that Apple decided to institute safeguards to prevent users from being able to "modify" or "delete" the QT X player app at all. If you really feel the app or the structure is in fact corrupted, then re-install the entire Mountain Lion operating system. (Again, I personally would try creating a secondary startup external drive to test this hypothesis before doing anything further to the primary startup volume.)

Bug with MAIL after update Maverick 10.9.4

Since I've update Maverick 10.9.3 to 10.9.4, MAIL can't recognize all my email account that I have in my preference system.
Mail ask me all time to configure my email accound (add email account).
When I try to configure an email account in MAIL, MAIL still frozen.
Someone have a tip our a solution ?
Thanks,
Bernard

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Event ID 1001 Bug check Occurred, After updation of Kaspersky Windows 7

Similar Messages

Maybe you are looking for