Event Listner for the console

I dont know whether this is the right forum for this question. May be this question is stupid. I am using a third part y jar file . I have a small swing application which calls this third party utility with certain arguments. This vendor utility spits out System.out.println statements to the console indicating the progress. I want to use this console print out and then update a progress bar for the swing applicatiion. Is there any way to write a console event listener for this?
Something gets printed on the console while the java program is running. could this event be trapped?
Thanks

I dont know whether this is the right forum for this
question. May be this question is stupid. I am using
a third part y jar file . I have a small swing
application which calls this third party utility
with certain arguments. This vendor utility spits out
System.out.println statements to the console
indicating the progress. I want to use this console
print out and then update a progress bar for the
swing applicatiion. Is there any way to write a
console event listener for this?
Something gets printed on the console while the java
program is running. could this event be trapped?
ThanksYou can redirect stdout to a stream that you has created. Read that stream and update the progress bar.
Kaj

Similar Messages

Warning: "No terminating events defined for the task used"

Dear all,
I created a task with ABAP class and method as its object method. This task is a background task. The ABAP class inherits the IF_WORKFLOW interface but doesn't implement any method of the interface.
When I try to confirm the task settings in transaction SWDD, a message shows up "No terminating events defined for the task used" and I cannot continue the work. Does anybody have any idea what I should do?
Thanks + Best Regards
Jerome

Hi Jerome,
If you set a background task in your workflow, and if it is asynchronous, then you need some way to tell the template if it is finished and what happened. In this case you set terminating events - that is events which are published in the system as a result of your method (ie document.posted etc).
Either use a synchronous method for your task or set appropriate terminating events in your task setup.
Regards
Gareth

Add Event Listener for the deletion

How can we add an event listner on the deletion of an item in the document?

As far as I know, InDesign DOM doesn't have such event, but Rorohiko's Active Page Item Developer (APID) Toolkit has it:
subjectDelete — Sent when one of the observed page items is about to be deleted.

Events triggered for the infotypes

Good day everybody,
I would like to know which events are triggered for the following infotypes:
1. PA0105.
2. PA0000.
3. PA0002.
4. PA0001.
5. PA0185.
Or can you please advice as to where to look or how to look for it
Thanks in advance,
Themba

Hi...
1) place a break point in FM "BF_FUNCTIONS_READ".
2) excute your infotypes so that execution stops at this FM and gave the event triggered.
Regards,
Lokeswari.

After renaming and moving to my desktop an iMovie project, i can not open it. I moved it back to iMovie but still it is not working. I noticed that there is not an Event Folder for the project. Can someone help me?

I renamed an iMovie project, then I moved it out of iMovie to my desktop. It did not work from there. Finally I managed to move it back to iMovie, but still does not work. I can't edit it, it does not even appear as an option. I found out that the Event Folder for this Project is gone. Is this the problem? Is there a way I can get it back? Can somenone help me?? Obviously after so many mistakes you can tell I am new on this. Any help will be appreciated it!!!!!

OK Let's take a step back.
If you imported video clips from a camcorder there would be an Events folder in the Movies/iMovie Events/ folder.
You have the option as you import from a camcorder to send your Event to an external drive instead. In this case, it would be in the iMovie Events folder at the top level of the external drive.
If your project has no video clips, but only photos, there may be no events folder, only links to iPhoto.
Similarly, if your camera imported your video clips to iPhoto, and you used the iPhoto event in iMovie, then your clips are in iPhoto, and there is no separate iMovie event.

How to fine event (BTE) for the std tcode

Hello Experts,
How can i find out event for the particular t-code,
Plz reply
thanks,
Sarang

Go to the transaction code and take the Program name.
Now come to se38 initial screen and enter the program name.
Now go to the menu Utilities-->Find in source code
One popup will come give the search value as OPEN_FI and search.
Now you can see the call function 'OPEN_FI_PERFORM_XXXX' where XXXX is the event number.
Now you can make the use of those event no in FIBF tcode.
Regards
Shiba Prasad Dutta

Orchestrator Console: Only use windows security promt one time for the console and not for the webservice

Hi there,
I have read the topics about the 2 windows Security Prompts. When I add the Console Website to my trusted internet sites, and use automatic logon to my intranet. Both prompts are gone. But that is not exactly what I want to achieve.
Is it possible to retain the first prompt (Authenticate Orchestration Console) but to disable the second prompt (Web service). I have tried to change the IIS Authentication Settings of 'Microsoft System Center Web Service Home' or 'Microsoft System Center
Web Service Home/Orchestrator2012 Home' from 'Windows Authentication' to 'Anonymous' authentication using the application pool Identity. This gives me the following error:
Does someone have been able to only preserve the fist prompt? Looking forward to you reply.

Hi there,
I have read the topics about the 2 windows Security Prompts. When I add the Console Website to my trusted internet sites, and use automatic logon to my intranet. Both prompts are gone. But that is not exactly what I want to achieve.
Is it possible to retain the first prompt (Authenticate Orchestration Console) but to disable the second prompt (Web service). I have tried to change the IIS Authentication Settings of 'Microsoft System Center Web Service Home' or 'Microsoft System Center
Web Service Home/Orchestrator2012 Home' from 'Windows Authentication' to 'Anonymous' authentication using the application pool Identity. This gives me the following error:
Does someone have been able to only preserve the fist prompt? Looking forward to you reply.

Help for the Console

Where can I get more Info on the Console?
Where is a command-list with explaination?

Where can I get more Info on the Console?
Where is a command-list with explaination?What type of console interface do you have ?
- Lom or Alom,
Which version of console interface do you have ?
Did you try 'help' ?
Did you search on docs.sun.com ?
Which hardware are you using ?
Coco D.

How can I use my Events album for the Screen saver?

I would like to use the "Events" album from my iPhoto 09 for my Screen Saver pictures source, but can't seem to find a way to do this. I tried to create a new folder in the Screen Saver preferences, but couldn't find a way to get to the Events album.
If anyone has a tip I would appreciate the help. I'm using Snow Leopard on a 27" iMac. Thanks much!

Try System Preferences - Desktop & Screensaver - Click the + sign at the bottom of the box on the left (see the picture) then choose where the photos are stored and you should be good to go.

Batch job scheduling based on Event AND for the job to complete

I am trying to schedule a background job based on an event AND based on the job finishing itself.
Example:
Job name: Send_Message
After Event: SAP_NEW_PROCESS Message
Program: Program xxxx
I want that the Send_Message job only runs when the Event SAP_NEW_PROCESS message happens AND the Send_Message job is not running.
Right now, I could only schedule it based on the event SAP_NEW_PROCESS Message which means that everytime this event happens the job runs and I end up having the job "Send_Message" in multilple intances where the others will immediately cancel since the first job is still running and so I end up with a lot of Cancelled job when it is not necessary to run them all when there is already 1 instance of the Job running.
How do I set it up in SAP?

Thanks but I am new to SAP having to set up a batch job.
The Event "SAP_NEW_PROCESS_MESSAGES" is a standard SAP Event. We used that such that when a new transaction comes in, the batch job will run but we don't want to run the batch job if the same batch job is already running.
YOu mentioned that I should set up Job_0. Do I need to create an ABAP prorgram to check if JOB_1 is running? How do I set up Job_0? What is the trigger for my Job_0 to run?
You also said that I set up Job_1 and trigger that based on the outcome of Job_0 AND at the same time be triggered by the event "SAP_NEW_PROCESS_MESSAGES". How do I set up this Job_1 so that it can be triggered by both Job_0 and a new transaction coming in(SAP_NEW_PROCESS_MESSAGES).
if you can provide me the step by step guide as I am new to this and I only know basic.
The current set up I have is
Job_1
Job Start:
      After Event
            Event: SAP_NEW_PROCESS_MESSAGES
      Step 1: program to run RCOCB002
I was thinking following your suggestion is this:
Job_0
Job Start
      After Event
            Event: SAP_NEW_PROCESS_MESSAGES
      Step 1: program to run - What will be my program to run?
Job_1
Job_Start
      After Event
            Event: What will be my trigger for Job_1 and how do I set it up?
      Step 1: program to run RCOCB002
Edited by: Shirley Te on Mar 10, 2010 3:25 PM

Using the right event/method for the PDF Factsheet.

When we click on the button to display the PDF Factsheet the current setup forces a java script to be used, named OpenPopup(). This seems to execute and complete before the DO_HANDLE_EVENT method is called. So if I place a break-point in the do_handle_event the PDF is on the screen before the breakpoint is displayed.
I want to detect the button value BEFORE the PDF Factsheet is created and was wondering if anyone knew how this can be achieved. I'm using B P_HEAD/OVERVIEW.
Jason

Hi Jason,
Just a pointer in case you don't know this funcion is the result of browser event (onClientlclick), which will be called immidiately in the browser before server round trip happens.
you can find the code of this function OpenPopup() in the BP_HEAD/AccountDetails html, from here you can debug and analyze what's happening in the application.
Cheers,
Sumit Mittal

Event Handlers for the Textfield

How can I capture the 'value changed' event of a text field, without using IB.

you can do addTarget:action:forControlEvents on UITextField, e.g.:
[myTextField addTarget:(id)self action:@selector(textFieldChanged) forControlEvents:UIControlEventEditingChanged]
then implement the textFieldChanged function, e.g.:
- (void)textFieldChanged{
NSLog(@"value changed");
Message was edited by: bratax

What is the Workflow Business Event Name for Order Management Price List

Hello Everyone,
Can anyone please help me to find out the Workflow Business Event name for the Order Management Price List?
Thanks in advanced,
Chandan

Chandan
Are you looking for business event name that is raised when the price list is created?
Thanks
Nagamohan

Unable to get automatic event handling for OK button.

Hello,
I have created a form using creatobject. This form contains an edit control and Search, Cancel buttons. I have set the Search buttons UID to "1" so it can handle the Enter key hit event. Instead its caption changes to Update when i start typing in the edit control and it does not respond to the Enter key hit. Cancel happens when Esc is hit.
My code looks like this -
Dim oCreationParams As SAPbouiCOM.FormCreationParams
        oCreationParams = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
        oCreationParams.UniqueID = "MySearchForm"
        oCreationParams.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Sizable
                Dim oForm As SAPbouiCOM.Form = SBO_Application.Forms.AddEx(oCreationParams)
oForm.Visible = True
'// set the form properties
        oForm.Title = "Search Form"
        oForm.Left = 300
        oForm.ClientWidth = 500
        oForm.Top = 100
        oForm.ClientHeight = 240
        '// Adding Items to the form
        '// and setting their properties
        '// Adding an Ok button
        '// We get automatic event handling for
        '// the Ok and Cancel Buttons by setting
        '// their UIDs to 1 and 2 respectively
        oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 5
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
        oButton = oItem.Specific
        oButton.Caption = "Search"
        '// Adding a Cancel button
        oItem = oForm.Items.Add("2", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 75
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
        oButton = oItem.Specific
        oButton.Caption = "Cancel"
oItem = oForm.Items.Add("NUM", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oItem.Left = 105
        oItem.Width = 140
        oItem.Top = 20
        oItem.Height = 16
        Dim oEditText As SAPbouiCOM.EditText = oItem.Specific
What changes do i have to make to get the enter key to work?
Thanks for your help.
Regards,
Sheetal

Hello Felipe,
Thanks for pointing me to the correct direction.
So on refering to the documentation i tried out a few things. But I am still missing something here.
I made the following changes to my code -
oForm.AutoManaged = True
oForm.SupportedModes = 1 ' afm_Ok
oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 5
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
oItem.SetAutoManagedAttribute(SAPbouiCOM.BoAutoManagedAttr.ama_Visible, 1, SAPbouiCOM.BoModeVisualBehavior.mvb_Default)
        oButton = oItem.Specific
        oButton.Caption = "OK"
AND
oForm.Mode = SAPbouiCOM.BoFormMode.fm_OK_MODE
oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 5
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
oItem.AffectsFormMode = False
I get the same behaviour OK button changes to update and enter key does not work.
Could you please tell me find what is it that i am doing wrong?
Regards,
Sheetal

How to start midi event playing from the middle of event?

I'm not sure if my post title is correct but...
I have a two minute piece of music with various instruments playing. There are some strings that play the same couple of notes throughout.
At the moment I am working on a middle section but as I loop, the srings aren't triggered - I have to play from the start (before the event starts). I did not have a problem with Cubase but I can't find a way to do this in Logic.
It's probaly quit simple though?

This typically means the midi notes themselves start before the beginning of the loop point you have choosen
You can quantize or manually move the first notes so that they start at the beginning of the loop and not just before... to resolve this..
Select the regions and then check the event list for the region to confirm this is what is going on...

Event Listner for the console

Similar Messages

Maybe you are looking for