Event to watch for JComboBox _finished_ selection?

When my app's JComboBoxes are clicked I can capture every
single change while the user is trying to decide with the
up arrow and down arrow keys. This allows some really neat
and dynamic things such as changing other components "live" or
in real time as the user navigates up and down. I make
extensive use of this Java event capture. The tutorial with
a little pig is a good example of that kind of event.
However, what I need additionally is to detect when the user has
made up her mind and the selecting process is finished. This
occurs for instance, when the <TAB> key is pressed and as a
result, the focus is transfered to the next component.
So, how can I detect not the fine grain event, up&down event,
but the higher level selection?
TIA,
-Ramon F. Herrera

I would suggest adding an action listener to the combo box and seeing if that will capture the event you are looking for.

Similar Messages

Is there any event listener for changing the selection of layer?

Hi all,
I am looking into an event listener which fires on changing the selection of layer. I found 'Select' event listener which fires on selecting the different object.
Actually the problem with Select event listener is that when we select an object and move it and deselect it by clicking on the document, event fires on the selection of that object. But if we again select the same object and move it, no event is fired at that time.
Is there any workaround of this? So that the event is fired every time when we select the same object.
Please help me on this..
Regards,
VG.

Thanks for the reply..
Actually I want the same behaviour as in illustrator i.e
- Select a layer. (Notifier calls the listener)
- Move it.
- Click on the document.
- Again select the same layer. (Notifier calls the listener again)
- Move it.
But in photoshop,
- Select a layer. (Notifier calls the listener)
- Move it.
- Click on the document.
- Again select the same layer. (Notifier doesnot calls the listener again as the layer is already selected in panel as you explained.)
- Move it.
Is there any way to get the same behaviour of illustrator in photoshop?

My "regular guy" impressions of using the Apple Watch for a few days

I was asked by friends to give my impressions of owning an Apple Watch. I guess it all comes down to:
Is the Apple watch worth about a dollar a day for the first year, and free thereafter?
I guess that depends on how much value you put on being able to leave your phone on silent, remaining in your pocket most of the day.
Because of the Taptic notifications, which are distinct "taps" on the wrist by the Watch for different things, I no longer have to keep my phone volume on all day (iPhone vibrations weren't strong enough in my pocket to notify me reliably) leading to a much nicer all day experience. On top of that, when I do get a notification, I can quickly flick my wrist to see what it is instead of digging my phone out. Much nicer to quickly glance at the latest 20% off offer from "YouNeedThis!.com" and dismiss it than dig the phone out, unlock it, click on mail, ...grumble.
The ease of notifications alone makes it worth it to me. It is easy to quickly respond most of the time, too. I find myself using my phone WAY less, which is refreshing (and I am sure appreciated by those around me.)
And the chirps, pings, whistles that used to emanate from my pocket all day are gone. Ahhhhh.
A few other things I have found convenient:
Actually knowing the time, date, weather etc. easily. Sure, I could have been wearing a wrist watch for some of that, but for the last few years I have used my Smartphone for these things. They are just so much simpler on the wrist.
Answering the phone easily when doing something. I am not one to wear a Bluetooth headset around like a Borg, so being able to easily answer when my wife calls as I am fixing lunch for the kid is really convenient.
Having the next thing on my daily calendar right there visible when I look at the Watch. I use the Mickey Mouse watch face normally (hey, I have an 18 month old daughter who loves pushing and seeing Mickey "dancing") and right there on the bottom it tells me the next thing on the list. I don't know how other folks do things on their phones, but I always had trouble sifting through notifications on the phone seeing what was on the agenda for the day. Yeah I could go to the calendar several times during the day on the phone, but it wasn't convenient. It is simple on the Watch seeing what is coming up during the week. And I say "week" because the Watch only shows you what is coming up in the NEAR future. To me that makes sense. Again, it is all about quick information and what works best in a glance. On the Watch it makes sense to quickly see what is coming soon. On the phone it makes sense to meander over months and make full edits in a more convenient manner.
Setting quick timers, reminders or alarms is a breeze using Siri on the Watch. So much more convenient than digging out the phone.
Getting a quick overview on the Watch on how active I have been (or not been) has already spurred me to get up and move more often. Yes there are other devices that help with this (I had a Fitbit previously) but having it all self contained within the Watch is nice and (here I go again) convenient.
A few things that are not perfect on the watch:
The speaker is pretty quiet when trying to have a hands free "Dick Tracy" conversation. Any kind of louder noise in the room and you will have trouble.
Apple is synonymous with consistency. Their entire platform is built on making a consistent experience for everyone that just works. On the Watch, however, there are some inconsistent uses of actions to do certain things. For example, sometimes when I get a notification and I want to dismiss it off the watch I can "Force press" which brings up a "Clear All" button to tap. Other times I have to scroll to the bottom of the notification to "dismiss." I like the "Force press" thing... let's make it happen consistently.
Most apps now are really pretty useless on the watch. For one thing, the screen times out too quickly for them. For another, anything in which one needs more than a glance to get the information is MUCH easier to do on the phone. Of all the apps in the Watch App store, the only things I have downloaded and find I actually use are a quick note dictation app, a "what is nearby me" type app, and a sports scores app. That being said, I am perfectly OK with that because that is really not what the Watch is for in my opinion. We aren't SUPPOSED to be doing things on the Watch that are more easily done on the phone. Things that are designed to be quick (check time, check weather, check who just sent a message) are great on the Watch. Things like searching for the best item on Amazon are just ridiculously silly on the Watch (really, Amazon?)
Conspicuously missing from the core apps on the Watch is Apple's "Notes" app. A perfect use for the Watch is to quickly take a note of something you need to remember later. I was forced to download a 3rd party app, Evernote, for this. The Evernote app works well, but I am very surprised that this was missed by Apple as a perfect example of what would be helpful to use the Watch to do.
There is no way to set the "screen on" time to a custom time period. Six seconds or so is default and unchangeable. This makes the Watch worthless for anyone in a health profession. Nurses and EMTs still take pulses using their watch to time the heart rate. Often, with irregular heart rates, a full 60 seconds must be observed. One just can't do this with the Watch. This is quite surprising as the Watch has actually been marketed to health workers with apps even designed solely to assist health workers in their daily planning. Apple clearly wanted to be able to control battery life with such a quick screen off "feature" but allowing us to decide for ourselves the tradeoff of battery life vs. usability would be a much better choice.
There are ways to make Tweets, Facebook status updates and the like on the Watch, but it really doesn't make sense to try to do it "all" socially on the Watch. It is so much easier on the phone to actually interact socially, that it really only makes sense to do so on the Watch in more of a "one off" way. When you just have to share something quickly, but don't really have time for give and take.
Finally, some things work a bit slow or wonky right now. I expect this to improve greatly over time with future versions of the software. Stuff like this ALWAYS gets better.
So for me, the Watch is working as I expect it should. There are certainly improvements that Apple can and will be able to make, but it is saving me time, adding ease of use to many actions I do every day, and is kind of fun to use. I am enjoying it because I am not expecting it to do things for which ANY wearable would not be well suited. The things it is best for, it does pretty well.
That is worth a dollar a day... to me at least.

To put the iPod into forced disk mode, this is what you should be doing.
Press and hold the Menu and Select buttons for at least 6 seconds until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Have you also seen this?
iPod shows only an Apple logo and doesn't start up.

Steps to create tabstrip for subscreen in selection screen

hi,
can let me know the steps taken to create subscreen in selection screen and put in tabstrip?
i need to have 3 screens. 1000 being the tabstrip, 2000 being first subscreen and 3000 being the second subscreen.
i have the abap code but i do not know the steps to create especially 1000 screen.
for 2000 and 3000, once i activated the program, these 2 screens added but i do not know where can i create the 1000 screen.
also, should i use wizard to create tabstrip?
please advise. thanks
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.        SELECTION-SCREEN BEGIN OF BLOCK x WITH FRAME TITLE text-001.
SELECT-OPTIONS: para1 FOR field1 ,
                              para2 FOR field2.
SELECTION-SCREEN END OF BLOCK x.
SELECTION-SCREEN END OF SCREEN 2000.
SELECTION-SCREEN BEGIN OF SCREEN 3000 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK y WITH FRAME TITLE text-002.
SELECT-OPTIONS: para3 FOR field3 ,
                              para4 FOR field4.
SELECTION-SCREEN END OF BLOCK y.
SELECTION-SCREEN:SKIP.
SELECTION-SCREEN END OF SCREEN 3000.

e_l,
See the total doc.. with example.
Assigning a Subscreen Area to a Tab Title
You must assign a subscreen area to each tab title. There are two ways of doing this:
Paging in the SAPgui
You need to assign a separate subscreen area to each tab title, and define the function codes of the tab titles with type P (local GUI function). In the screen flow logic, you call all the subscreens in the PBO event. This means that all of the tab pages reside locally on the SAPgui.
When the user chooses a tab title, paging takes place within the SAPgui. In this respect, the tabstrip control behaves like a single screen. In particular, the PAI event is not triggered when the user chooses a tab title, and no data is transported. While this improves the performance of your tabstrip control, it also has the negative effect that when the user does trigger the PAI event, all of the input checks for all of the subscreens are performed. This means that when the user is working on one tab page, the input checks may jump to an unfilled mandatory field on another page.
Local paging at the SAPgui is therefore most appropriate for screens that display data rather than for input screens.
Paging on the Application Server
One subscreen area is shared by all tab titles and called in the PBO event. You define the function codes of the individual tab titles without a special function type. When the user chooses a tab page, the PAI event is triggered, and you must include a module in your flow logic that activates the appropriate tab page and assigns the correct subscreen to the subscreen area.
Since the PAI event is triggered each time the user chooses a tab title, this method is less economical for the application server, but the input checks that are performed only affect the current tab page.
Procedure in Either Case
You create the subscreen areas within the tabstrip area. You assign the subscreen areas to one or more tab titles in the Screen Painter by selecting one or more titles. You can also assign a subscreen area to a tab title in the tab title attributes by entering the name of the subscreen area in the Reference field attribute.
The procedure for the alphanumeric Screen Painter is described under Creating Tabstrip Controls.
If you are paging at the SAPgui, create a subscreen area for each tab title. If you are paging at the application server, select all tab titles and create a single subscreen area. The subscreen areas may not cover the top line of the tab area. However, within a tab area, more than one subscreen area can overlap.
Programming the Flow Logic
In the flow logic, all you have to do by hand is include the correct subscreens. The screen flow and data transport to the ABAP program is the same as for normal subscreens. There are two ways of programming the screen flow logic, depending on how you have decided to page through the tabstrip control.
Paging in the SAPgui
When you page in the SAPgui, you must include a subscreen for each subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN: <area1> INCLUDING [<prog 1>] <dynp 1>,
                  <area2> INCLUDING [<prog 2>] <dynp 2>,
                  <area3> INCLUDING [<prog 3>] <dynp 3>,
PROCESS AFTER INPUT.
CALL SUBSCREEN: <area1>,
                  <area2>,
                  <area3>,
Paging on the Application Server
When you page on the application server, you only have to include a subscreen for the one subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN <area> INCLUDING [<prog>] <dynp>.
PROCESS AFTER INPUT.
CALL SUBSCREEN <area>.
Handling in the ABAP Program
Before you can use a tabstrip control in your ABAP program, you must create a control for each control in the declaration part of your program using the following statement:
CONTROLS <ctrl> TYPE TABSTRIP.
where <ctrl> is the name of the tabstrip area on a screen in the ABAP program. The control allows the ABAP program to work with the tabstrip control. The statement declares a structure with the name <ctrl> . The only component of this structure that you need in your program is called ACTIVETAB.
Use in the PBO event
Before the screen is displayed, you use the control to set the tab page that is currently active. To do this, assign the function code of the corresponding tab title to the component ACTIVETAB:
<ctrl>-ACTIVETAB = <fcode>.
When you page at the SAPgui, you only need to do this once before the screen is displayed. This initializes the tabstrip control. The default active tab page is the first page. After this, the page activated when the user chooses a tab title is set within SAPgui.
When you page on the application server, you must assign the active page both before the screen is displayed for the first time, and each time the user pages. At the same time, you must set the required subscreen screen.
You can suppress a tab page dynamically by setting the ACTIVE field of table SCREEN to 0 for the corresponding tab title.
Use in the PAI event
In the PAI event, ACTIVETAB contains the function code of the last active tab title on the screen.
When you page in the SAPgui, this allows you to find out the page that the user can currently see. When you page at the application server, the active tab page is controlled by the ABAP program anyway.
The OK_CODE field behaves differently according to the paging method:
Paging in the SAPgui
When you page in the SAPgui, the PAI event is not triggered when the user chooses a tab title, and the OK_CODE field is not filled. The OK_CODE field is only filled by user actions in the GUI status or when the user chooses a pushbutton either outside the tabstrip control or on one of the subscreens.
Paging on the application server
If you are paging at the application server, the PAI event is triggered when the user chooses a tab title, and the OK_CODE field is filled with the corresponding function code.
To page through the tabstrip control, you must assign the function code to the ACTIVETAB component of the control:
<ctrl>-ACTIVETAB = <ok_code>.
This statement overwrites the function code of the last active tab page with that of the new tab title. At the same time, you must ensure that the correct subscreen is inserted in the subscreen area.
Otherwise, tabstrip controls are handled like normal subscrens in ABAP programs, that is, the ABAP program of a subscreen screen must contain the dialog modules called from the flow logic of the subscreen.
Examples
Tabstrip control, paging at SAPgui
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ENDIF.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The screen contains a tabstrip area called MYTABSTRIP with three tab titles PUSH1, PUSH2 and PUSH3. The function codes have the same name, and all have the function type P. One of the subscreen areas SUB1 to SUB3 is assigned to each tab title. The pushbutton has the name BUTTON and the function code OK.
In the same ABAP program, there are three subscreen screens 110 to 130. Each of these fits the subscreen area exactly. The layout is:
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN: SUB1 INCLUDING SY-REPID '0110',
                  SUB2 INCLUDING SY-REPID '0120',
                  SUB3 INCLUDING SY-REPID '0130'.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN: SUB1,
                  SUB2,
                  SUB3.
MODULE USER_COMMAND.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
When you run the program, a screen appears on which the second tab page is active, since the program sets the ACTIVETAB component of the structure MYTABSTRIP to PUSH2 before the screen is displayed. The user can page through the tabstrip control without the PAI event being triggered. One of the three subscreens is included on each tab page.
When the user chooses Continue, the PAI event is triggered, and an information message displays the function code of the tab title of the page that is currently active.
Tabstrip control with paging on the application server.
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
DATA NUMBER TYPE SY-DYNNR.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
NUMBER = '0120'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ELSE.
    MYTABSTRIP-ACTIVETAB = SAVE_OK.
    CASE SAVE_OK.
      WHEN 'PUSH1'.
        NUMBER = '0110'.
      WHEN 'PUSH2'.
        NUMBER = '0120'.
      WHEN 'PUSH3'.
        NUMBER = '0130'.
    ENDCASE.
ENDIF.
ENDMODULE.
The statically-defined next screen for screen 100 is itself, and its layout is the same as in the above example. However, the function codes of the three tab titles have the function type <blank> and they all share a single subscreen area SUB.
The same subscreen screens 110 to 130 are defined as in the last example.
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN SUB.
MODULE USER_COMMAND.
In this example, the program includes a subscreen screen in the subscreen area SUB dynamically during the PBO event.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
This example has the same function as the previous example, but the paging within the tabstrip control is implemented on the application server. Each time the user chooses a tab title, the function code from the OK_CODE field is assigned to the ACTIVETAB component of structure MYTABSTRIP. At the same time, the variable NUMBER is filled with the screen number of the subscreen that has to be displayed in the subscreen area SUB of the tabstrip control
Pls. reward if useful

For r in (select) loop: execution plan question

Hi there,
I have a procedure which does the following (on Oracle 11.1.0.7):
begin
for r in (select col1,max(col2) as col2 from tab@remote_db group by col1 ) loop
    update tab2
       set col_a = r.co1
       where col_b = r.col2;
    commit;
end loop;
end;The subselect from the remote table delivers about 4000 rows.
When executing fast, the procedure runs about 20 seconds, the trace shows that the select is executed 1 time, fetches 49 times. The update executes 4000 times.
When executing slow, the procedure runs about 20 minutes (!), the trace shows that the select is executed 1 times, fetches 4000 times. The update executes 4000 times.
This happens without changing the code, from the same client (sqlplus on the server, same version as database).
Can anyone probably give me a clue how I could track down the plsql execution steps like the optimizer trace that let you see why a certain sqlplan was not taken or what might cause that change in behavior?
I cannot produce that behavior at will - most times the procedure runs fast.
thanks,
Heimo

Hi again,
regarding the "faulty test" and what is fastest: user tested both versions and came up with the for-loop to satisfy him best. I would, of course, utilize event 10046 and tkprof and a repeatable dataset to have solid data. Sorry for not setting enough emphasis on my real question, which is described in the following.
But, and that is what is really causing awkward feelings for me: when doing plain sql, I can use events 10046, 10053 and learn from the tracefiles why a decision was taken (now that is making me feel good, actually). But when it comes to plsql, I have not yet such a handy toolset that helps me understand what influences the plsql-engine to go this or that way.
Thus, I valued the posts pointing to dbms_trace and plsql_optimization_level as helpful answers.
Because of that I learned about the views %_PLSQL_OBJECT_SETTINGS and remembered to check for other plsql-initora settings.
I also verified that neither the 10046 nor the 10053 trace files contain any reference to plsql-parameters/settings, and that the 10053 trace only shows the subselect and update, but no info if it would "bulkify" or not.
Meanwhile I did start to utilize dbms_trace (which causes the statement to go the unbulkifyed by the way) and maybe I can learn from that output or from following posts?
best regards
Heimo

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

How to create a event to display records depend on selection ofdropdownlist

BSP
how to create a event to display records depend on selection of dropdownlist box,
Using BHTML,
thank you,
regards,
jagrut bharatkumar shukla

1) Copy this script to the code
<script type="text/javascript">
function displayVacationDates() {
    for (var i=0; i < document.forms[0].Status.length; i++) {
        if (document.forms[0].Status[i].checked && document.forms[0].Status[i].value=='Vacation'){
          document.getElementById('startDateRow').style.visibility='visible';
          document.getElementById('endDateRow').style.visibility='visible';
         if (document.forms[0].Status[i].checked && !(document.forms[0].Status[i].value=='Vacation')){
         document.getElementById('startDateRow').style.visibility='hidden';
          document.getElementById('endDateRow').style.visibility='hidden';
</script>
2) Set initial style to 'hidden'
<tr id="startDateRow" style="visibility:hidden">
<td align="left"><blockquote>
<p><span class="style16 style8"><strong>Start date:
</strong></span></p>
</blockquote>                 </td>
<td align="left"><script>DateInput('VacStart', true, 'DD-MON-YYYY')</script></td>
</tr>
<tr id="endDateRow" style="visibility:hidden">
<td align="left"><blockquote>
<p><span class="style16 style8"><strong>End date:
</strong></span></p>
</blockquote>                      </td>
<td align="left"><script>DateInput('VacEnd', true, 'DD-MON-YYYY')</script></td>
</tr>
3) Call the display script
<input name="Status" type="radio" value="In the Field" onclick="displayVacationDates()">
<input name="Status" type="radio" value="Vacation" onclick="displayVacationDates()">
<input name="Status" type="radio" value="Sick day" onclick="displayVacationDates()">
<input name="Status" type="radio" value="Admin Day" onclick="displayVacationDates()">
<input name="Status" type="radio" value="DSR Ride Along" onclick="displayVacationDates()">
<input name="Status" type="radio" value="ServiceCall" onclick="displayVacationDates()">

Iphoto events not showing for Facebook

Not sure if this is iPhoto or Facebook, so apologies in advance!!
I can upload pics direct to Facebook from iPhoto, but when I try and pick a photo for a specifice group etc it comes up with the following message as if it can't open iPhoto
Can anyone help me please :-) Have looked through settings, tried to google, but not having any luck!

OK, thanks Leonie... unfortunately I can't do them in a batch though, I have about 300 of these!
An example of somebody who is able to do it in a batch is in here: Convert iPhoto Events to Photos Albums
kieran485Apr 16, 2015 7:08 AM
Re: Convert iPhoto Events to Photos Albumsin response to Kevin Hawkins
I had the same problem. There is a quick and easy fix. Go to My Albums section and then go into the album "iPhoto Events" and then hit Command + A (Select All) that will highlight all the events. Then right click and click on move events out of "iPhoto Events". Once you do this, all your events will be individual albums listed in the album section.
.. so why am I unable to do that?

LYNC 2013 Event Logging Parameters for LYNC server logs

Hi,
We have LYNC server 2013 enterprise voice. We have third party Monitoring server to monitor the event logging.
Do we have default event logging parameters for LYNC Server logs in LYNC 2013?
Thanks
jitender

There's really just the default level of logging for Lync Server Event Logs. For individual call troubleshooting you might use the debug logger, and for longer term troubleshooting you'd deploy the Lync Monitoring role. The monitoring role, service
status, and performance monitor counters are what you really want to be monitoring if you're watching your Enterprise Voice deployment.
If I understand the question, there isn't a way to turn up the amount of logs generated in the Lync event logs or change parameters around this.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

How to create a F4 help for a report selection screen field

hi,
can any one guide me to create F4 help for a field in a selection screen in a report program,plz give me a sample code

hi,
Here are the following ways
1.with the help of match code objects we can create the F4 Functionality for Field.
Syntax is :
PARAMETERS: p_org LIKE t527x-orgeh MATCHCODE OBJECT zorg.
2. One more thing is we can do it with Search Help's also.
3. Even we can do it HELP Views also.
Help Views:
You have to create a help view if a view with outer join is needed as selection method of a search help
The selection method of a search help is either a table or a view. If you have to select data from several tables for the search help, you should generally use a database view as selection method. However, a database view always implements an inner join. If you need a view with outer join for the data selection, you have to use a help view as selection method.
All the tables included in a help view must be linked with foreign keys. Only foreign keys that have certain attributes can be used here. The first table to be inserted in the help view is called the primary table of the help view. The tables added to this primary table with foreign keys are called secondary tables.
The functionality of a help view has changed significantly between Release 3.0 and Release 4.0. In Release 3.0, a help view was automatically displayed for the input help (F4 help) for all the fields that were checked against the primary table of the help view. This is no longer the case in Release 4.0.
As of Release 4.0, you must explicitly create a search help that must be linked with the fields for which it is offered (see Linking Search Helps with Screen Fields ).
Existing help views are automatically migrated to search helps when you upgrade to a release higher than 4.0.
A help view implements an outer join, i.e. all the contents of the primary table of the help view are always displayed. You therefore should not formulate a selection condition for fields in one of the secondary tables of the help view. If records of these secondary tables cannot be read as a result of this selection condition, the contents of the corresponding fields of the secondary table are displayed with initial value.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:15 PM

Multi color gradient for touch and selected color of spark mobile list

multi color gradient for touch and selected color of spark mobile list
how to get dat?

or how about a bitmap as the background for the touch and selected color for the items in a list.

No Schedule Lines for Delivery upto selected date

Hi,
I have a scenario for Repairs order. Following are the steps of my scenario:
1. Create a Repair Order.
2. Create return delivery to recieve the faulty item.
3. Create Outbound Delivery to send a loaner item to customer (This item would be returned once the returned item is repaired and sent to customer)
4. Send the item after repairing.
5. Receive the loaner item.
When I am trying to create outbound delivery for Loaner item, i am getting an error "No Schedule Lines for Delivery upto selected date".
I have checked and verified the schedule line date.
I have checked for Confirmed Quantity.
Below are the screenshots. Please let me know how can this issue be resolved.

Hi,
With reference of your screens,I can see there is no qty in the field loner hence you are getting issue.
1.May I know ,why you have checked indicator -Repair?
because ,you are not going to repair the goods.You are just sending loner items to customer.In this case what is the use of to indicate repair ?.
Thanks,
Naren

DYNP_VALUES_READ Limitations for multiple lines select options

Hi all !
   First post here, but a tough one I think. Here is my inquiry :
   I have worked on an specific abap function used in many long abap list reports. Theses reports are launched in background processing. The aim of this routine is to stop the report execution if a background job with the same selection parameters is already launched for the current user (to Prevent useless several launch of a time-expensive program).
    Because this routine is dynamic, I read the selection screen of the current report with the function 'DYNP_VALUES_READ'. And I compare the result with the variant of the backgroung job (read with function 'RS_VARIANT_CONTENTS').
    The real problem is that function "DYNP_VALUES_READ" only extract the first line of select-options. I found an alternative solution to extract the select options values (a dynamic assign with field symbols), but external conversions (for WBS elements for example ) are lost, so the comparison detects differences between the background job's variant values and the current selection screen values.
    Does anybody know a way to get entire select options values from a selection screen just as they are displayed on screen ?
Thanks for reading my message
Message was edited by: Thomas BRICOUT

Thomas,
Perhaps the following code will help you. A function module in the code captures everything on the selection screen into an internal table. It doesn't actually capture the information the way you want it, but I believe you will be able to work with it to achieve your desired result. If it doesn't meet your needs, it is still useful for printing selection screen fields and their values.
Bruce
report zybttes2.
tables: zf137,   " 137 General Ledger Document Details Table
        zf137a. " 137 General Ledger Document Details Table, Archive
selection-screen begin of block b1 with frame title text-004." BCT003
parameters: p_zf137   radiobutton group xxx,                " BCT003
            p_zf137a radiobutton group xxx.                " BCT003
selection-screen end of block b1.                           " BCT003
selection-screen begin of block parameter with frame title text-001.
selection-screen skip 1.
select-options: s_date for zf137-zzpostdat.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-002.
selection-screen end of line.
selection-screen skip 1.
select-options: s_loan for zf137-zzloan.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-003.
selection-screen end of line.
selection-screen skip 1.
select-options: s_ccentr for zf137-zzcostctr.
selection-screen skip 1.
selection-screen end of block parameter.
data: ww(3) type n.
data: zz(3) type c.
data: c1(1) type c value '0'.
do 2 times.
ww = ww + 1.
zz = ww. shift zz left deleting leading c1.
write: / zz.
enddo.
Capture and then print the selection screen fields and their values
data: begin of i_info occurs 20,
        flag,
        olength type x,
        line like raldb-infoline,
      end of i_info.
call function 'PRINT_SELECTIONS'
exporting
    mode      = 'TABLE'
    rname     = sy-cprog
    rvariante = sy-slset
tables
    infotab   = i_info.
loop at   i_info.
write: / i_info-line.
endloop.
write: / 'end'.

How to use Event Tracking Code for Google Analytics in Dreamweaver CS5

I need to track clicks on links that go to an outside website. I've read about "event tracking code". I'm not sure if it's the right tool to use. And if it is, I've spent several hours reading about it and I can't figure out how to use it. It looks like you need to be an expert developer to be able to make sense of all this. I've always been helped when I ask a question here, I'm hoping that someone can help me.
What my client needs is to know what links are being clicked, and how often. Here's the page where I want to do this: Available Homes - Arizona Vacation Home Rentals
I added a code that I created using the tool I found here: General Event Tracking Code for Google Analytics but can't see to be able to make this work. I added this code to the first link called "View it Here" for the top, left house. Here's the code: <a href="http://www.homeaway.com/vacation-rental/p3495538" onClick="ga('send', 'event', { eventCategory: 'clicks', eventAction: 'clicks on homes', eventLabel: 'Clicked'});" target="_blank">View it HERE!</a>
Then I set a Goal in Google Analytics like it said in the instructions but it doesn't seem to work... I would APPRECIATE ANY HELP!
Thanks,
Brigitte

I think you misunderstood what Event Tracking is designed for. This is from Google Help
Tracking Code: Event Tracking - Google Analytics — Google Developers
"Use this to track visitor behavior on your website that is NOT related to a web page visit, such as interaction with a Flash video movie control or any user event that does not trigger a page request."
Clicks on links are page requests. I think for your purposes, you may want the Cross Domain Link Tracking plugin.
Cross Domain Tracking - Web Tracking (analytics.js) - Google Analytics — Google Developers
Nancy O.

How do I move an event and keep the favorite clip selections?

Hi all,
I have to move several events from one external hard drive to another. On many of these events I've already started selecting favorite clips. When I moved my first event it erased my favorite selections. Not good. That took a lot of time and work. How do I move events and save the favorite clip selections within each event?
Thanks,
ggbeamer

It would be a good idea to learn iPhoto - the iPhoto '09 tutorials will help - and it would be a worthwhile investment of time to take the iphoto tutorials - http://www.apple.com/findouthow/photos/ - they are very helpful and will save you a lot of time and frustration. and there are iPhoto '11 tutorials under the help menu
A small investment of time now will save a lot of time and lost photos later
LN

Event to watch for JComboBox _finished_ selection?

Similar Messages

Maybe you are looking for