Ever since I agreed to install the new Mozilla Firefox I can't even send an e-mail successfully. I want the old Mozilla Firefox back and I will never agree to a newer version of anything. Please give me the old version back.
I want my old Mozilla Firefox back because ever since I agreed to try the new Firefox, I've had nothing but problems every single time I try to send an e-mail. What used to be easy and quick, now is difficult and takes an inordinate amount of time; sending it over and over, and telling the message that tells me something like a page is not responding, to send it again or quit; and I have to do this many times over to get it to send a text. That has never happened before. I will never agree to a newer version again. Just please give me back my old Mozilla Firefox.
Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
The good news is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. The bad news is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*VERY IMPORTANT; read this carefully: https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Similar Messages
-
I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
RaghavendarHi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support -
Hi ,This is Pratap,please give me the suitable answer
In ALV report,after filling the selection screen,if we save the selection screen,it will ask the varient name,after giving the varient name and description,we save it,where it is actually stored.
Please give me the answer.
In advance Thank's for your responce.
Pratap.Check the tables
TVARVC Table of Variant Variables (Client-Specific)
TVARV Table of variables in selection criteria
VARIDESC Selection Variants: Description
Edited by: Mahalakshmi Padmanaban on Feb 29, 2008 5:27 AM -
i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.
As newer iPhones and iOS versions are made, apps start to drop support for the older versions of the iOS. It looks like you have fallen victim to this. I commend you for sticking with the original iPhone until now, but it looks like it's time for an upgrade if you want to use apps that have dropped support.
Also the new iPhone provides hundreds of new features and spec upgrades from the original. Check it out! http://www.apple.com/iphone/ -
how to register a new responsibility in apps through backend. please give me the full details about it
Hi,
From backend you can add a responsibility to a user using FND_USER_PKG package, and there are so many hit in the google. Let me point out 1:
http://manoharbabuapps.blogspot.com/2013/08/how-to-add-responsibility-from-back-end.html
I personally dont know of any API where you can create a responsibility from backend, but from front end you can create. Steps detailed in following link:
Oracle Applications: creating responsibility in oracle apps R12
Thanks &
Best Regards,
Asif -
hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help
What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work -
ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over again why can't the techs at apple fix this defective program??????????????
ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over again why can't the techs at apple fix this defective program??????????????
-
Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.
Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
i have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?
Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.
-
since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc. I thought I had a Mac! What should I do to restore the facility?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
ever since i put a child lock on my Mac its never been the same .. now i cant even open my yahoo mail without it wanting me to reinstall this, can someone please help me work this out
What "child lock" are you talking about?
Do you mean you set up a Managed account (Parental Controls), or some other software?
For Parental Controls, select the account in Users & Groups and uncheck the "Enable parental controls" checkbox. -
I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?
Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help. -
My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..) and setting the account back up? and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
This just started happening for no reason...no changes to the phone or Ipad?my iphone and ipad will not send or receive emails or messages for the last few days. it is telling me that cannot connect to server
-
My itunes aacount was on my home computer that me and my brother both used. The computer died and we will need to buy a new one. We thought that if we just logged into our account from my laptop all the music would be there, it's not. Can anyone help us?
Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free
-
Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.
Maybe you are looking for
-
Error during import. Please HELP!
Hello All, We want to export / import some page groups and are faced with the following situation. We were able to get the transport set of the page group from the source and create the dmp file using the command: File.cmd -mode export -s portal -p <
-
Use fieldname into the tablename of a select-statement
I have made the next table : SQL> desc ttcafo001120; Name Null? Type T$GCMP NOT NULL NUMBER T$CUNO NOT NULL CHAR(6) T$NAMA NOT NULL CHAR(35) where t$gcmp is always a number of 3 postions. I want to make a program that look like this : When t$gcmp = 1
-
My ipod videos wont play on wmv
Im trying to edit and import videos from my ipod, but when played there is no sound and a black image on windows piece of crap movie maker.
-
How do I get a 4 minute video from my iPhone to my MacBook Pro? Can't seem to get AirDrop to do it. Thanks.
-
Is there a way to have folders automatically organize themselves?
Hello everyone, I would like to know if there is a way to adjust settings in OS X so that my folders automatically orgainze themselves into icon view arranged by name. I've looked for a script or workflow to help, but can't seem to find anything. Can