Every photo has a blue sting but not in the level view. What must I do to change this? In other programms the pictures are shown right.
Every photo has a blue sting but not in the level view. What must I do to change this? In other programms the pictures are shown right.
Open the PSE Editor, not the Organizer.
Enhance>Adjust Color>Remove Color Cast
If that does not fix it, you can post a picture here on the forum so that we may provide additional suggestions. To do that, use the camera icon at the top of the reply box.
Similar Messages
-
I have a IPad 3 and IPod Touch 4. When an IPhone 4 or 5 sends à photo on Inessage, it tells that the message nr could be delievered. But, the photo comes to my IPod but not My IPad 3. What problem could this be?
Can it be some problems with the WiFi?Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
They say purchased but wont go into my itunes library or onto my iphone. Please help.
Hey there aussieboss123,
It sounds like you are wanting to download an album that you pre ordered, not all the songs are downloading. First, use this section of the following article to see if the tracks download:
Download a pre-ordered item
When a pre-ordered item becomes available, you will receive an email letting you know that you can download your pre-order.
If you enabled the option to automatically download prepurchased content in iTunes, then your pre-ordered content may already be in your library. If not, click the download link provided in your email notification, and your pre-ordered content will begin to download. You can also use the Check for Available Downloads feature in iTunes on your computer (choose Store > Check for Available Downloads) to begin downloading your pre-order.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
If it does not, I would use the following article to report a problem with the purchase to the iTunes Store support directly:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
Cheers,
Sterling -
1px is missing from text, but not in the stage area
So my issue is this. I have some text, static, arial. The letter "F" has the top bar missing so it almost looks like a t. But this only looks like this when I render. In the staging area while viewing actual pixels the F looks perfectly fine. Is there a way to fix this without making the text thicker? Whats worse is that when i do custom anti alias settings and thicken the font by 200(which is the max) it actually is thicker than some of the other texts but the to of the F is still missing....its practically bolder than the actual bold setting and its messed up....
I tried to make sure that its positioning is not on a decimal point with no success(that includes any other layers that the text is in).
Any suggestions on how to fix this?Hello everybody,
PL 32 is taken back from the portal and the PL 31 is re-available. If you have had upgraded the PL, downgraded it back except you want the bug or error in the PL 32 still exists, just use it.
PL 34 will be available within several days next. Adios amigo...Zorro.
Rgds, -
I see songs such as "Monday, Monday" or "Paint It, Black" or even the artist name such as "Fireballs, with Jimmy Gilmer" which have comma's in them, being a problem when I try to do the following:
1. Export a playlist which contains songs which are all there and play fine, but some have comma's in the title such as listed above.
2. I then open that file in Excel and bring it in as a Tab-delimited file. Everything lays out fine, and all the songs are thing (including those with comma's).
3. I then sort the varoius fields I want (which I can't do in i-tunes because i-tunes won't sort it properly), and resave the file as a newly named file, which is also a .txt file.
4. I then import that playlist into my itunes. It is exactly the same songs that I just had exported but i-tunes says some of the songs can't be found.
I have traced this problem to comma's in the file name of the song such as listed above. There must be a solution to this either as the file is opened in excel or in how it's saved or some other solution short of having to rename song/artists without using comma's.
Thanks.The additional problem is the file name of the song itself. Even if I were able to delete the commas or replace with a space for example, changing the file name would result in itunes not being able to find the file. I would have to go through each file (out of about 15,000+ songs) to find any that have titles such as described in this thread and change not only the song and artist in the fields, but changing the mp3 file itself.
I fear that I am really pretty much going to have to start with a list of songs that have no comma and then do a file compare to find those songs with commas and then just physically moving them into a new playlist I'm trying to create, but this is a royal pain as I want to be able to create a variety of playlists based on these chart dates/peak positions.
I'm trying to sort the songs in this manner: I use different fields in itunes so that I can put the "peak position" of each song based on Billboard charts, as well as the date the peak position was acheived. I use the "comment box" for that. I use the "grouping" field for my peak position.
So I end up with something like "10/14/1980" in the comment box as the peak position for a song which is in the grouping field, and so forth. If I try to sort the comments column in itunes for example, it won't sort properly. If I sort the Grouping field, it will bring up all the "1's", but that's followed by "10", 11, ...19, then "2", etc. This is why I want to export the playlist and sort it as I want, and then reimport the playlist into itunes.
What I'm ultimately trying to achieve is a year-by-year peak position playlist so that I end up with every #1 song (in this case) from, say, January 1st 1980 and then every #1 song in sequential order for the rest of the year falls in line. I have chart position dates from 1955 through 1999. I have entered in all the data from Billboard books I own so I can really create some amazing playlists, but these commas are problematic. Had I known this ahead of time I would have made "Monday, Monday" as "Monday Monday" and not included commas, but it's too late for that.
Any suggestions? -
when i download any picture with Firefox that time it shows only Microsoft word logo but don't show the picture logo ,thus when i open the download file it only show the Microsoft word file . and i cant see my file. but now what can i do?...
Which file extension do those files get when you save them?
If they do not have a valid file extension for an image like .jpg or .png then try to rename the files and give them a .jpg file extension to see if that helps.<br />
If Windows is hiding the file extension then use quotes ("image.jpg") around the name.<br />
You can verify the file type via the right-click context menu > Properties. -
My wife & I have an Ipad each, & both of us have the same problem. When we have received our e-mails only certain ones give notice of arrival, & the rest go straight to trash. How can we stop this. I can't find any settings to alter it & this is a problem as most are wanted.Thanks.
What you have there is either a jailbroken unit with some crazy custom UI or an eastern knockoff. Give us some photos of the ipad itself, mainly the back and some experts can help.
If you plug it into iTunes does iTunes even acknowledge that an ipad is connected? If it does then try a restore.
Failing that, head down to an apple store and see what they can do for you. -
I can't access my email while in foreign countries although my Iphone 5c will access
wifi for all other applicatons.How do I fix this?Apple doesn't seem to have the answer>My daughter's 4S did this after Apple replaced the back.
There's a clear piece of plastic in there was not seated correctly and the flash was popping back into the lens.
Apple store just took the back of and reset the piece where it's supposed to go. Took about 2 minutes.
Take it to an Apple store. -
why is the ios6 compatible for all the iphones but not all the phones got the all upgrades, for example the panorama camera?? this is another reason I am starting to dislike apple. An ipod is able to us an upgrade but not all the phones are? makes sense
"why is the ios6 compatible for all the iphones"
Ios 6 is not available for all iphones. Original Iphone and iphone 3 are not supported.
"but not all the phones got the all upgrades, "
This is common for most any device/computer. Not all iphone/computer/device models can handle all of the new features. Like any device, hardware is limited and cannot always support all new features and software. -
When converting a Word doc to a PDF the pictures are surrounded by a blue shadowed boxes
I started off with a PDF, then converted to a Word doc, made necessary changes, and converted back to a new PDF. However, the new PDF has put blue colored boxes around all the pictures. Anyone know how to fix?
I am using Adobe Acrobat X Pro on a workstation using Windows 7.
I have converted docs this way many times before, but for some reason it does not seem to complete the process about 50% of the time these days.
Here is a screen shot
Thanks!! Tom -
When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.
Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I am trying to attach multiple photos to an email using ipad 2. I can see how to do it using the camera and camera roll ap...
But not using the photos ap..which is where the photos are. Any help would be appreciated.!In an album in Photos touch the Edit button and then touch the desired photos (up to 5). A blue check appears in each selected photo. Next touch the Share button at the upper left and select Mail. This starts a email with the photos attached.
-
In downloading my Events from iPhoto on my Mac to my Ipad Air, the Events arrive in Photos in the correct order but not showing the Key photo. At the same time, the Events arrive in iPhoto in a totally random order but with the Key phto showing. Why? of course and is there a way to shift the order in Iphoto and get a Key photo in Photos?
HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
i tried to sort it out by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated. -
just recently my iphone is not syncing calendar to my macbook. It has worked all along until about a week ago. It does transfer new items from the computer to the iphone but not from the iphone to the computer.
Plug you iPhone into your computer, select the iPhone, select the photos tab. Now check (not uncheck) the sync photos from... Select the folder where the photo came from, click apply then sync, now uncheck the sync photos box, click apply, it will ask you if you want to remove the photos click remove, it will not delete other photos exept the ones in the folder that was synced. Then click sync and the photos will be removed
-
How do I download previously purchased albums from iTunes when the album has either disappeared from my computer or the tunes are not playable? The albums show as purchased on the iTunes store, but not available to download to my authorized device. I also have albums that appear in my library, but are not able to be added to my iPod from my computer
When you download something from the iCloud, it is a brand new licensed copy. Your iCloud account just contains a notation that you have this app. It isn't storing an actual copy of the app from your Mac.
Maybe you are looking for
-
Java Stack mandatory for a SAP BI system integrated with EP?
Hi Guru's, Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI. This is integrated with the EP. But our BI system does not contain the Java Stack installed. When we work on WAD templates and execute the template, it is automati
-
Error while transferin intenal table data to application server
*& Report YGL_BALANCES REPORT YGL_BALANCES. TABLES:BAPI1028_0,BAPI1028_4,faglflext. data: f_glacc(10) type c value 'flgl.text' . DATA: BALANCE LIKE BAPI1028_4-BALANCE, RETUR LIKE BAPIRETURN, FISC_YEAR LIKE BAPI1028_4-FISC_YEAR, F
-
LR Resizing Engine? Which method does it use?
The stock agency I am submitting to wants images upsampled to 12"x18" at 300ppi (55MB). They suggest doing this in PS using Bicubic Smoother (best for enlarging). I'd like to be able to avoid having to introduce PS into my workflow, but I don't know
-
How to get IDOC segment occurence
Hi All, I am trying out IDOC to File scenario and facing a problem due to repetition of segments in IDOC. Requirement is to repeat the field in output file base on the segment occurance. i am trying to map the record set of target file structure to
-
I've got a very similar story to Chris. My broadband went down from about 4.8Mbps to 0.14 last week. I used the BT chat facility to report it and someone did something at the exchange which made it worse - now not only slow but dropping out every few