Every time i down itunes on my pc i seems like it worked at the end i get a messace that the register setting used by itunes is missing and to re-install, i am using win7prem.
i have tried to download itunes several times it seems like it is working but at the end of the install i get a box telling me the register i tunes uses is missing to reinstall. i turned off my fire wall for the download i removed lg and nero burning software but it still does not work. my os system is windows 7 prem. how can i replace the missing program in the register i-tunes needs to work?
thank you pete
Album artwork can be added/changed on songs via the iTunes Get Info menu item from the File menu. Note that music that you loaded from CDs will not have any artwork. If you want to aquire artwork you can try the File menu item Library > Get Artwork or you can download artwork from the internet, etc. Note that just changing artwork on your computer won't affect the iPod until you sync.
If the artwork is correct on your computer iTunes then delete all the music on your iPod by syncing with iTunes with no music selected. Then reload the music onto your iPod by again syncing with iTunes with all the music you want selected.
Similar Messages
-
I am trying to restore my Calendar from my Time Machine back up. I can get through the process but at the end I get a message that Calendars cannot be removed or amended as it is required by OS10, there does not appear to be any option to authorise the backup or change. How can I get round this roadblock?
I am trying to restore my Calendar from my Time Machine back up. I can get through the process but at the end I get a message that Calendars cannot be removed or amended as it is required by OS10, there does not appear to be any option to authorise the backup or change. How can I get round this roadblock?
-
Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
ThanksThanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying. -
My iMatch is crashing every time is reaches the end of step #2 - checking all the songs in my iTunes library. There are 4,389 songs to match, and when it reaches 4,388 songs checked and matched, it crashes and shuts downs iTunes altogether.
hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo
-
Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
ThanksIt is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.
-
I use my PowerPC Quicksilver G4 (2.1), 867 MHz, 1.5 GB standart video card system 10.4.11 to scan (lack of driver for my Mac Pro 10.6.8)
The G4 has been running flawless, now I get kernel panics every time (shut down your computer). When it stays on I get blotched video
left-over spots, tearig and then shut down your computer...
I did all recommended software tests Diskutility, rebuild with DiskWarrior and Apples full Hardware test. Everything comes out fine!
I am at the end of my know how. Thank you for any help
W.W.
I am attaching the latest crashreport:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000047AC834E PC=0x0000000000821D3C
Latest crash info for cpu 0:
Exception state (sv=0x37D2EA00)
PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
0x00029234 0x000233F8 0x000ABEAC 0x5038514E
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Proceeding back via exception chain:
Exception state (sv=0x37D2EA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x38A98780)
PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x37D2EA00)
PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
0x00029234 0x000233F8 0x000ABEAC 0x5038514E
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Exception state (sv=0x38A98780)
PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8 Model: PowerMac3,5, BootROM 4.2.5f1, 1 processors, PowerPC G4 (2.1), 867 MHz, 1.5 GB
Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB
Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333
Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333
Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333
Modem: Spring, UCJ, V.90, 7.0F, á¸
Network Service: Built-in Ethernet, Ethernet, en0
Parallel ATA Device: WDC WD1200JB-00GVA0, 111.79 GB
Parallel ATA Device: ST3120814A, 111.79 GB
Parallel ATA Device: PIONEER DVD-RW DVR-103
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Fujitsu Takamisawa Component, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mAThank you for your reply BDAqua.
Yes I ran short and the Extended Test. All pass. One of the first things I did is Safe Boot several times I also repaired permissions. Safe boot takes no longer than before the crashes and as long as I stay in safe boot mode it won't crash. What does that mean?I also ran MacJanitor and removed the SCCUZI card Apple put in when I bought the G4 as well as an M-Audio Delta 66 card which I do not use (both) anymore. I also started up on an external firewire drive 10.4.6. It also (crashes) does the same thing.
I was hoping somebody understands the crash report I enclosed? Isn't that suppose to say what went wrong?
Thank you again for your input BDAqua
W.W. -
I have tried uninstalling and installing itunes several times following the outlined tutorial. During part of the installation i get a message that recommends me get in contact help/support and concludes with HRESULT:0x800736B3 ...................any ideas?
The links on this Support page may be of help: http://www.apple.com/support/itunes/install/
-
(The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
can anyone help me with this issue, every time i try to restore it will come up like this error message.Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?
I hope it doesn't effect how I down load my itunes to my ipod and iphone.
No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.) -
Hi there - Every time I try to open an app, it seems to crash. Has anyone experience this problem? Suggestions are appreciated for getting this fixed. Thx!
- Reset the iPod. Nothng is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/.install any new app.
- The remaining items here:
iOS: Troubleshooting applications purchased from the App Store
- Last, restore the iPod -
When I tried to use my saved credit card, I made an error & it didn't work. Now, although the error is corrected, I keep getting a message that the card is declined. Can I fix this, or will the error time out?
Hello KGDJ,
Thanks for using Apple Support Communities.
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message
For more information on this, take a look at:
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/ts1646
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
Best of luck,
Mario -
I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can anyone help me please as I have several photos to edit before the end of this month. Many thanks for any help
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight
This is a wireless carrier issue. The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
Contact your wireless carrier about your call quality issue. -
I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!
Hello there, xkatiex255.
The following Knowledge Base article should provide the steps for you to resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro instead of the free reader?
It may depend on the plugin that is loaded into your browser. However, right click on a PDF and select the Open With option and go to the default button to select Acrobat as the default. That might do it.
Maybe you are looking for
-
Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After a period of time the screen will turn grey, but the mouse will still operate, but not boot up.
-
Adobe Acrobat XI Pro Context Menu is missing Windows 8
Hi there, I've just installed acrobat XI and I found that the context menu (convert to pdf, combine files...) is missing. Does anyone know how to put it back? Cheers!
-
Xml transformation of element attributes ?
I have already build a succesfull transformation with an xml file I could define myself. now I get an xml file out of another software pacakge that I also try to transform into tables. the structure is totally different since this vendor puts all the
-
FB4.7 SDK vs. AIR 3.4 SDK
It seems that 4.6.0 SDK provided with Flash builder 4.7 is incosistent with AIR 3.4 SDK available for download: under 4.6.0 SDK available in FB 4.7 - I can build my project nicely, no warnings, no errors, unit tests runs - when I compare this sdk to
-
Word pagination not correct in converted files
We use word 2007 pagination in headers of documents, but sometimes when these docments are converted to pdf they don't paginate correctly. For example the word doc is 20 pages so the pagination say X of 20. But when converted each page says 1 of 1,