Every time I load my igoogle home page opening firefox, it opens it in two tabs instead of one, and then AVG tells me firefox is using too much memory and I should close and reopen it; Why

I open firefox using my igoogle home page and immediately it opens two igoogle tabs on top instead of just one how do I stop it from opening the second one? and then after about two minutes AVG tells me firefox is using too much memory slowing my machine and tells me to close and reopen fire fox...how do I fix that?

Make sure that Firefox closes properly and that that there are no longer Firefox or plugin-container processes left on the Processes tab in the Task Manager. Otherwise session restore will reopen the page(s) from the previous session.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs

Similar Messages

  • Why does Firefox keep telling me that it is using too much memory, (eg: 235MB) and I should restart Firefox?

    Lately Firefox has been popping up a warning while I am on the internet saying, that "Firefox" is using too much memory. It suggests shutting down Firefox and restarting Firefox. It also told me how much memory that is in use at that time. It is usually about 235MB or more. What is normal memory use for Firefox to use while I am on the internet? Does high usage mean that some other person is trying to get into my computer?

    You appear to have AVG installed:
    *See --> http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=173969#post_173969
    From reading on the internet, it appears that when there is a spike in memory usage, AVG "interprets" that as a memory leak, possibly caused by malware. AVG could be incorrect concerning that assumption. Maybe they are being a bit too conservative about memory usage; just my opinion.
    The decision is yours to turn off the "advisor" or leave it on.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Avg tells me firefox is using too much memory,close and restart

    avg pops up and tells me firefox is using too much memory.close firefox and restart it.page gets slow when this happens

    Now using Firefox 7 I'll give it some time and let you know the results Thanks Jack

  • Why does my laptop give me a warning saying that firefox is using too much memory and to restart firefox to be more efficient? I just bought this laptop so I know it has the power to run what I need it to.

    Why does my laptop give me a warning saying that firefox is using too much memory and to restart firefox to be more efficient? I just bought this laptop so I know it has the power to run what I need it to.

    You appear to have AVG installed:
    *See --> http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=173969#post_173969
    From reading on the internet, it appears that when there is a spike in memory usage, AVG "interprets" that as a memory leak, possibly caused by malware. AVG could be incorrect concerning that assumption. Maybe they are being a bit too conservative about memory usage; just my opinion.
    The decision is yours to turn off the "advisor" or leave it on.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Why does AVG keep telling me Mozilla is using too much memory?

    Why does AVG keep telling me that Mozilla is using too much memory and I have to close and reopen the program?

    the Advisor is just telling you the same thing you can see for yourself in the Task Manager; I can open firefox with only a few tabs and then watch the memory usage skyrocket when Firefox should be doing nothing - after a couple of hours it will get up to as high as 1.5GB before it completely hangs and I have to end the process in Task Manager, and this does this with all extensions disabled and in Safemode.

  • Firefox uses too much memory, gets bloated, and won't respond.

    For the past several versions of FF....I have posted here about it's 'behavior' under OS X.
    The browser uses too much memory. After a short period of time, it becomes 'bloated', slow to respond, and requiring a 'force quit' to get out of it.
    Being as I've posted about this before, for a previous version, and only received feedback from other Mac users experiencing the same thing, and not getting answers or help...I've stopped using it once more. It was a one day trial, and I didn't make it past 6 hours of use.
    Welcome back, Safari!!!

    For the past several versions of FF....I have posted here about it's 'behavior' under OS X.
    The browser uses too much memory. After a short period of time, it becomes 'bloated', slow to respond, and requiring a 'force quit' to get out of it.
    Being as I've posted about this before, for a previous version, and only received feedback from other Mac users experiencing the same thing, and not getting answers or help...I've stopped using it once more. It was a one day trial, and I didn't make it past 6 hours of use.
    Welcome back, Safari!!!

  • OIM 11g using too much memory and not releasing it when shutting down

    Hello,
    we have a problem with OIM 11g using too much memory (about 5gb) and it's not releasing it at shutdown (4gb still used).
    We are using a VM with RedHat Linux 5.6. Originally we had 4gb RAM + 2gb swap file. We installed Admin Server, OAM, OIM and SOA on that machine but quickly realised we couldn't run all 4 programs at once in 6gb. AdminServer could run with 2 other products, but it was a tight fit in memory.
    So we increased the RAM to 8gb (still 2gb swap file). But then our problem occured : I start the Admin Server (2.7gb total memory used), then OAM (4.6gb total memory used) and then OIM. After it started the server is now using 9.6gb of memory (~300mb of free memory) ! The problem gets even better : after I shut down everything (OIM, OAM, admin server) the "top" command show that there is still 4gb of memory used even tho nothing else is running on the server ! There is absolutely no other process (other than root stuff) running and no other users connected to the machine. After a reboot, it shows 400mb of memory used. I tried restarting the programs and it did the same thing.
    Our intuition is that there might be a memory leak or some bug in OIM that might use up almost all the free memory and it's not releasing it upon shutdown. It might have been there before we increased the memory but have not noticed it since memory was already tight.
    Anyone encountered the same problem ? Any idea ? Any suggestion to narrow down the problem ?
    Thank you

    You can adjust the memory settings for WLS by editing the setSOADomainEnv.sh file that can be found in your /middleware/user_projects/domains/<domain>/bin/ folder. There is an argument called PORT_MEM_ARGS which is used to set your Java memory arguments. This way you can decrease/increase the amount of memory used by each managed server.
    I usually type "ps -ef | grep oracle" to see what processes are running by the oracle user. This way the output doesn't get cluttered with root processes.
    Sunny Tsang

  • Every time I click on my home page it opens two tabs one of which is the mozilla atart page. I would like it to stop.

    I believe that the question is self descriptive. I open a new tab and it opens. I click on my home page which is Google. The browser then opens a second tab and in the second tab that it opens is the Mozilla start page. if I do this several times during the day I end up with several tabs open to the Mozilla start page and it is irritating.
    Thank you for your help.

    Firefox can have multiple home pages, check your list of home pages to ensure that the 2 sites are not listed. See [[how to set the home page]] for details.

  • How do you remove the serveads pop up that occurs every time you load a new web page?

    This only occurs with my Mozilla Firefox browser.

    See this article about the New Tab page (about:newtab):
    *https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
    Try to reset some preferences to the default with the SearchReset extension:
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • Running slow and I keep getting messages saying Firfox is using too much memory and that I should close the progtam. Do I have memory leakage?

    Firefox quits responding

    You appear to have AVG installed:
    *See --> http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=173969#post_173969
    From reading on the internet, it appears that when there is a spike in memory usage, AVG "interprets" that as a memory leak, possibly caused by malware. AVG could be incorrect concerning that assumption. Maybe they are being a bit too conservative about memory usage; just my opinion.
    The decision is yours to turn off the "advisor" or leave it on.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Firefox uses too much memory and processor power, up to 800k at times

    Firefox.exe sometimes uses 60% of my CPU usage, up to about 800k...whatever that is. My AOL virtually stops, and refreshing pages or opening new ones on Firefox can take up to 30 seconds. I have 2 gigs RAM, and without that upgrade, my Dell wouldn't be working at all. I have Windows XP Pro, and 80 gigs HDD. Thanks,
    Carl

    If you consider the problem solved you could mark it as such please.
    However note Norton Internet Security, by default, is likely to run 'pulse updates' not really a topic to discuss here other than to say that such activity may well continue, depending on your settings with Norton, regardless of whether or not, you have the Norton toolbar installed.
    I currently have a paid for version of Norton installed.
    My understanding being that the Norton bar relates to, password etc management, safe searching, and general connection with the Norton site.
    *The Norton Toolbar is not compatible with the current firefox 4 beta
    * I would not know if it has any other detrimental effects on firefox
    * In itself removing the toolbar will not stop Norton software impacting on use of firefox (but it is of course there to provide security, I do not suggest you remove it, only that you take into account its cost CPU wise)

  • How do I reduce CPU and high Firefox usuage when I mainly just check my email when the box pops up saying I'm using too much

    I'm really frustrated because a message pops up all the time when I'm checking my email and then it does something really strange and I can't click on anything to open for a short period of time while it looks like it is reloading. It is so slow and it happens so frequently. What can I do?

    You can't avoid that if you use backspace or go back otherwise (toolbar Back button or via the right-click context menu). You will have to use the link or button on that page to go to the inbox.

  • My iPhone 5 appears to be using too much memory, particularly 7.9GB out of the 32GB labeled "OTHER". Even my iPad Air has only 3.9GB labeled "OTHER". How do I identify what "OTHER" is actually used for and how do I mitigate this?

    According to iTunes I am using approximately 20.35GB of the available 27.32GM of memory, leaving about 7GB free. Of the used memory, about 7.9GB is labeled "OTHER". Making the same measurement on my iPad Air, only 3.9GB is labeled "OTHER". Why am I loosing so much memory capacity and what do I do to mitigate this problem?
    This is having a significant effect on using my iPhone for recording Video interviews which in some cases constitute two to three hours of video. I need to be able togged the "OTHER" memory space so I can do more than one video recording during a session. Lowering the "OTHER" category to 3.9GB, the same as the iPad Air, would make it possible to record two or in some cases three videos before having to offload them to the MacBook Pro for editing in the evening.

    Charliebear88 wrote:
    No. He mentions freeing up storage on the iPhone, Mac, and hard drive. I'm looking for just the iPhone, and his suggestion for that is downloading some program.
    No, it's not, if you would actually read the linked information like I said.  There is plenty of information in this link about how to reduce or eliminate your 'Other' data without using third-party programs or procedures:
    http://appducate.com/2013/01/reclaim-other-storage-space-on-ipad-iphone-and-ipod /
    • Delete Browser Cache
    • Delete Mail account and re-add
    • Delete Text Messages
    • Empty out the Reading List
    • Delete iTunes Backups
    • Backup to iCloud instead of iTunes
    • Restore as new then restore the backup
    • Restore as new, but don't restore backup

  • Sometimes I get a message on the task bar at the bottom of the screen saying Firefox is using too much memory and the browser slows down terribly. What do I need to do?

    This has been happening for several months now.
    I use AVG anti-virus and it runs both updates and scans regularly. I do find that if I do an extra full scan it improves the situation for perhaps half a day.
    Sometimes the fault slows down the browser so much that it times out and I have to click the retry button.
    It seems to happen with most sites that I visit, I have been unable to identify any particular one as being worse than the others

    If you want to reduce memory(60%) '''when firefox minimize[only in windows os] '''there is an easy old good trick:
    type in the address bar '''about:config'''
    then press the button '''i'll be careful i promise'''
    then '''right-click''' anywhere in the list of preferences and choose '''new''' > '''boolean'''
    then type in the open window '''config.trim_on_minimize'''
    then click''' OK''', and in the next window select '''TRUE''' and click '''OK'''.
    exit firefox and restart-it.
    '''works only in windows os'''
    see for more info :
    [http://kb.mozillazine.org/About:config About:config]
    [http://kb.mozillazine.org/Config.trim_on_minimize Config.trim on minimize]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Every time i go to my home page firefox open a new tab for "mozilla firefox home page"

    keeps opening extra tabs

    See: Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    See: [[Options window - Advanced panel#General_tab]]
    See also: http://kb.mozillazine.org/accessibility.blockautorefresh

Maybe you are looking for

  • I want to create a new apple account and switch my iPod Touch over to it. How can i do this without erasing all of the data?

    I have an iPod Touch (4th generation) and found i would like to switch it over to a new apple account. Is there anyway for this to happen without deleting any data?

  • Blank screen after 'slide to setup'

    Hi After a restore and update to iOS 7.0.4 via iTunes from 6.1.3, I am now stuck at the slide to set up screen, when swiping the screen just goes black and cannot proceed. The device is visible in iTunes, phone number etc. But can't use the phone...

  • HELP PLEASE, MEDIA ENCODER HAS ME HOSTAGE

    I know someone has two easy answers...help, help. Big Problem one, exporting from Premiere C4, forced into using Media Encoder, which sit there and won't encode from the project/timeline. The project is even small, 7 minutes, and I just want to me a

  • UTF-8 not displaying correctly in terminal

    I'm installing Arch for the first time, and it's going fairly well but one thing that's still bugging me is that UTF-8 characters aren't displaying correctly in the terminal. I seem to be having exactly the same problem described in this thread: http

  • Updating DB from Edit control

    Hi    I have a list control that displays the data from a database.When I click on an item in a list control, the details of that item are displayed in the Edit control. Now, when I edit on those details in edit controls and click on an Update button