EWA Report of EP server

Hi,
I want to generate EWA Report of my Enterprise Protal server in my Solution Manager server.
Fot that I had install SMD in my Solman server and SMD & wily Introscope in my Enterprise Portal server.
Now can you please guide me which next steps is require so that  I can genetate EWA report in solman?
Regards,
Nisit

Once you have installed the agents on the satellite system and performed the other steps pertaining to the agent, you need to define the EP system in Solution Manager in SMSY with all the necessary details.
If the system information is already updated through SLD, verify whether the information maintained is correct and up to date.
Then execute the SOLMAN_SETUP steps.
Ensure that the SMSY details are correct as it plays an important role pertaining to the system information and the further setup of Diagnostics/Wily.
Verify whether the EP system has appeared in your Solution Manager Workcenter SID list.
Execute the setup wizard for managed systems, ensure that the setup is complete without any errors. If any errors, resolve them and ensure that the setup results are Green.
Execute the IS Agent setup for the satellite SID.
EWA reports will be successfully scheduled once all these steps are executed successfully and when the EP system is added in a Solution.
Hope this helps.

Similar Messages

  • EWA reports for SAP Content Server

    Hi
    I have installed the SAP Content Server 6.40 on Solaris and MaxDB but my client want to configure EWA for  SAP Content Server.
    As per Content Server for EWA reports need to be configuring only Database and OS.
    Kindly suggest me what are the steps need to be performed to setup the EWA for Content Server.
    Regards,
    Panu

    Hi There
    In order to have EWA report for any system you need to meet some prerequisit , for detail please refer to
    this link below..
    http://service.sap.com/EWA   >> Media Library
    Best Regards
    Jai Wardhan

  • EWA reports for non abap systems

    Hello gurus,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
    >>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
    In the SMD i can see just the abap systems  for which the EWA are being already generated.
    (i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
    Do you have any idea, what i have done wrong?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system , EP  SPS 19
    Thank you very much for your points!!

    Hello Jagan,
    I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
    And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
    Do you have any idea?
    Thanks,
    Best regards
    Slavomir

  • Parameter event - to be set according to  EWA report

    Good day fellas,
    I have a problem on my EWA report :
    event 10027 trace name context forever, level 1
      10028 trace name context forever, level 1
      10142 trace name context forever, level 1
      10183 trace name context forever, level 1
      10411 trace name context forever, level 1
      10629 trace name context forever, level 32
      14532 trace name context forever, level 1
      38068 trace name context forever, level 100
      38085 trace name context forever, level 1
      38087 trace name context forever, level 1
      44951 trace name context forever, level 1024
      10191 trace name context forever, level 1
      10753 trace name context forever, level 2
      10191 trace name context forever, level 1
      10091 trace name context forever, level 1
    and a bit below:
    The following table lists events we found to be activated in your system, but which should only be activated in special circumstances. Please check whether there are special reasons to set these events. If they are no longer needed, they should be removed.
    Event
    10091
    How can I check these special circumstances and if this parameter is needed ?
    Thanks in advance,

    Hi deepakkori.
    The parameter is already defined in initSID.ora:
    *.event='10027 trace name context forever, level 1','10028 trace name context forever, level 1','10142 trace name context forever, level 1','10183 trace name context forever, le
    vel 1','10411 trace name context forever, level 1','10629 trace name context forever, level 32','14532 trace name context forever, level 1','38068 trace name context forever, le
    vel 100','38085 trace name context forever, level 1','38087 trace name context forever, level 1','44951 trace name context forever, level 1024','10191 trace name context forever
    , level 1','10753 trace name context forever, level 2','10191 trace name context forever, level 1','10091 trace name context forever, level 1'
    and they do not recommned any SAP note. These are the only things recommended in EWA:
    Parameter EVENT
    To provide special functionality or control system behavior, Oracle has a number of events. These can be activated in the configuration file and/or dynamically in the server manager or sqlplus.
    In general, these events and parameters should be activated on request only. When they are no longer needed, they should be removed. However, it might be necessary to activate some events during normal database operation.
    The following table displays the values for the parameter "event" as
    found in your system:
    Parameter Current Value
    event 10027 trace name context forever, level 1
      10028 trace name context forever, level 1
      10142 trace name context forever, level 1
      10183 trace name context forever, level 1
      10411 trace name context forever, level 1
      10629 trace name context forever, level 32
      14532 trace name context forever, level 1
      38068 trace name context forever, level 100
      38085 trace name context forever, level 1
      38087 trace name context forever, level 1
      44951 trace name context forever, level 1024
      10191 trace name context forever, level 1
      10753 trace name context forever, level 2
      10191 trace name context forever, level 1
      10091 trace name context forever, level 1
    The following table lists events we found to be activated in your system, but which should only be activated in special circumstances. Please check whether there are special reasons to set these events. If they are no longer needed, they should be removed.
    Event
    10091
    So I am not sure, how to check if I should remove this 10091 or leave it there. What is that special case that this parameter needs to be present ?
    Any idea ?
    thanks in advance,

  • EWA  Report  as Word Attachment to email address

    hi
    Currently I have html format of  EWA report automatically sent to Basis Team email id .
    How do I get EWA  report file  as  MSWORD  Attachment in email.
    Yes. I can see that   in Solman System , MSword file is generated ., But emailed  only HTML  version.
    Hope you got my Point .

    Mahesh Gangula wrote:
    Thanks for all your replies .
    >
    > SAP Already confirms that , Thats not possible.
    >
    > My Client Manager Asking , why EWA  comes are   In-place(email body)   HTML  .
    >
    > Can we make it asd  HTML Attachment  as email delivery ?
    Hello Mahesh
    The main technical difficulty is the fact that many a email servers reject HTML content as a attachment. Plus the fact that the EWA report uses IGS services if opened as a HTML page will fail all the time since the email is not connected to the IGS server of the Solution Manager.
    Hence a mail body is created instead of a attachment.
    I hope that you now understand the technicality of the issue.
    Regards
    Amit

  • Grey (blank) EWA reports generated for Portal systems

    I am attempting to set up EWA reports for J2EE systems. At this stage despite all efforts I continue to get grey rated (blank) reports generated for our Portal systems.
    As far as I can tell all required components are installed correctly (Wily, SMD server, SMD agents etc).
    This problem seems to be restricted to our Portal systems as report data is being generated for our XI J2EE engines with the same SMD components installed.
    CGA collection jobs are running successfully against the managed Portal systems, and I have attempted to manually generate reports via transaction DSA in the Solution Manager system, using an uploaded service data xml file generated with the SMD/services utility. This also results in a blank report.
    Our systems comprise the following components:
    Wily v7.1
    SMD 13 on Solution Manager and managed systems
    Solution Manager 4.0 SP13: (ABAP):
    SAP_ABA     700     0013     SAPKA70013
    SAP_BASIS     700     0013     SAPKB70013
    ST-PI  2005_1_700     0006     SAPKITLQI6
    PI_BASIS 2005_1_700     0013     SAPKIPYJ7D
    SAP_BW     700     0015     SAPKW70015
    SAP_AP     700     0009     SAPKNA7009
    BBPCRM     500     0009     SAPKU50009
    CPRXRPM     400     0010     SAPK-40010INCPRXRPM
    ST     400     0013     SAPKITL423
    BI_CONT     703     0008     SAPKIBIIP8
    ST-A/PI     01K_CRM560     0000          -
    ST-ICO     150_700     0011     SAPK-1507BINSTPL
    ST-SER     700_2006_2     0004     SAPKITLOK4
    Solution Manager (J2EE):
    sap.com     SAP_JTECHF     7.00 SP13 (1000.7.00.13.0.20070812015644)
    sap.com     ISAGENT     7.00 SP13 (1000.7.00.14.0.20070927052333)
    sap.com     SAP-JEE     7.00 SP13 (1000.7.00.13.0.20070812015311)
    sap.com     SAP-JEECOR     7.00 SP13 (1000.7.00.13.0.20070907082334)
    sap.com     BASETABLES     7.00 SP13 (1000.7.00.13.0.20070812013638)
    sap.com     CORE-TOOLS     7.00 SP13 (1000.7.00.13.0.20070812014121)
    sap.com     JLOGVIEW     7.00 SP13 (1000.7.00.13.0.20070812001600)
    sap.com     JSPM     7.00 SP13 (1000.7.00.13.0.20070812001700)
    sap.com     CAF     7.00 SP13 (1000.7.00.13.0.20070809092315)
    sap.com     UMEADMIN     7.00 SP13 (1000.7.00.13.0.20070809093947)
    sap.com     ADSSAP     7.00 SP13 (1000.7.00.13.0.20070812011854)
    sap.com     BI_MMR     7.00 SP13 (1000.7.00.13.0.20070812013749)
    sap.com     CAF-UM     7.00 SP13 (1000.7.00.13.0.20070809092324)
    sap.com     KM-KW_JIKS     7.00 SP13 (1000.7.00.13.0.20070812014519)
    sap.com     SAP_JTECHS     7.00 SP13 (1000.7.00.13.0.20070812015951)
    sap.com     BI_UDI     7.00 SP13 (1000.7.00.13.0.20070811190400)
    sap.com     LM-SERVICE     7.00 SP13 (1000.7.00.13.0.20070812001200)
    sap.com     LM-TOOLS     7.00 SP13 (1000.7.00.13.0.20070906104634)
    Among many, many others, the following notes and documentation has been followed:
    976054 Availability of EWA for Non ABAP components
    1010428 End-to-End Diagnostics
    762969 - Grey rating for Earywatch Report
    EWA guide for NON-ABAB components
    SAP Solution Manager 4.0 End-to-End Root Cause Analysis Installation Guide
    762969 - Grey rating for Earywatch Report
    And of course all the Wily & SMD installation guides.
    Please let me know if there is any other information required. I'm posting this in the hopes that someone else has had this problem and has been able to resolve it. I have read though what seems like hundreds of threads on SMD setup problems, however not many that describe the problem I'm having exactly.
    Many thanks in advace.
    Tim

    Hi Stephan,
    You're on the right track! When I try manually generate reports for our XI systems via uploaded service data, I only get valid report data if I generate report with graphics - otherwise the report is blank.
    Alas with the Portal systems, I get no report data either way.
    The XML storage table does contain data (with XI & Portal systems) - so comms with the J2EE is working.
    Thanks for your help.
    Tim

  • Configuration of EWA reports for java systems.

    Hello,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I  am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
    So far, so good according to manuals but when i  want do define data collection in the SMD for Gargage Collection  (task in scheduler) i cannot see host of my portal system.
    I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been  generated.
    Am i missing something?
    Some configuration in SMD?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system  NW 7.0 EP, SPS 6 (planning to SPS 19)
    Thank you for your advices!!!

    Hi Suveer,
    I did the configuration before. I forgot to mention it.
    I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
    Step BI Details
    Cannot invoke CCMSBISETUP on host localhost
    !! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
    Exceptions
    com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
    at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
    ... 37 more
    And also this one>>
    Step RFC Details
    Failed to create TCP/IP RFC on ABAP side (SM59)
    !! Exception :      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    Exceptions
    com.sap.aii.proxy.framework.core.BaseProxyException:      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
    at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
    Thanks a lot for your remarks

  • Grey EWA report in solution manager

    I have migrated the server to another system with different SID, and then upgraded the system to solution Manager 4.0, with sp11,
    Oss Note 762696 has been followed, but I still have grey EWA report.
    any insight or suggestion ?
    thank you,
    Vedi

    Hi Ruediger,
    I already open SAP message, but I see their feedback not for a week now.
    Btw, according to that note(917558), I also have to put ST-SER in satellite system,
    which I never have to put there in the past.
    Could you confirm,
    here is my satellite system support package lists:
    SAP_ABA     700     0011     SAPKA70011     Cross-Application Component
    SAP_BASIS     700     0011     SAPKB70011     SAP Basis Component
    PI_BASIS     2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
    ST-PI     2005_1_700     0003     SAPKITLQI3     SAP Solution Tools Plug-In
    SAP_BW     700     0012     SAPKW70012     SAP NetWeaver BI 7.0
    LCAPPS     2005_700     0004     SAPKIBHD04     LCAPPS 2005_700 : Add-On Installation
    SAP_AP     700     0008     SAPKNA7008     SAP Application Platform 7.00
    EA-IPPE     400     0007     SAPKGPID07     SAP iPPE (EA-IPPE) 400
    SCM_BASIS     500     0008     SAPK-50008INSCMBASIS     SCM Basis 5.0
    SCM     500     0008     SAPKY50008     Supply Chain Management 5.0
    QIE     200     0004     SAPK-20004INQIE     Quality Inspection Engine 2.00
    BI_CONT     702     0001     SAPKIBIHP1     Business Intelligence Content
    CPRXRPM     400     0007     SAPK-40007INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
    ST-A/PI     01I_SCM500     0000     -     Application Servicetools for SCM 500
    regards,
    vedi

  • Warning about the parallel_max_servers parameter in ewa reports

    Hi gurus,
    We produce ewa reports using our solution manager system. The health and performance of the systems are evaluated using these reports.
    For all our sap systems, although the database parameter settings are configured correctly according to the oss note 830576, in the section 9.2, it gives warning for the parameter parallel_max_servers. We are almost sure that the value of the parameter parallel_max_servers is also set correctly. Whatever we did, we couldn't set it green.
    Is there a way to turn it green, or as the sentence says in the report "If it is configured correctly, then ignore the yellow rating for this parameter." means that there is no way, although  the parameter is set correctly, it will stay in yellow?
    Best Regards,
    Tolga

    Hi,
    The optimal value for PARALLEL_MAX_SERVERS depends on the CPU cores in the database server available for database ( total CPU cores on database  server minus CPU requirements of other applications including SAP central instance). As the CPU requirements for all applications other
    than database cannot be determined automatically by the EarlyWatch Alert  tool, it doesnt have a reference value to compare the current setting and comment on it. The optimal setting has to be determined manually. If  the PARALLEL_MAX_SERVERS is set correctly then please ignore the
    alert generated in the EarlyWatch Alert report
    Just because the rating is yellow in the report doesnt mean that the setting is incorrect. The report just tries to alert you that the optimal setting for this parameter could not be determined and asks
    you to ensure it is set optimally.
    Cheers!

  • EWA report: didnt send to SAP!!! Help Please

    Hi experts,
    All of my servers generated EWA reports, but it did not sent to SAP. I have the checked mark to send to SAP.... It was working fine. one of my team members, he deleted all the jobs and scheduled em again.... which perticular job do I need to schedule to send to SAP? I thought this is the job that needs be schedulled >>> "SEND_SYSTEM_RELATIONSHIP_TO_SUPP". this job is working fine. Other than that, I dont understand why it didnt send to SAP?
    Please help.
    Thanks in advanced!!
    I will post points for sure!!

    Hi Afi,
    Kindly note the sequence of steps to be done for EWA generation.
    1. Setup of the Server, database and system in transaction SMSY.
    2. Generating the RFC's for the System and ensuring that the trusted
    RFC works.
    3. Adding the system to a logical component and assigning the logical
    component to a Solution Landscape created in DSWP.
    3. Setting up of EWA from the Solution Settings from the operations
    setup in DSWP.
    4. Configuring the SDCC / SDCCN on the satellite system (see note Note 763561 ) and adding the Solution Manager RFC to the SDCC settings.
    5. Refreshing of sessions via the SDCCN transaction on the Satellite
    system. This can be automated via the Auto session Manager Report.
    6. Processing of the session and sending the collected data to Solution
    manager.
    7. Processing the collected data in the Solution Manager System and
    generating the EWA Report.
    if helpful reward points are appreciated

  • EWA Report Issue: No complete data is populated in EWA report

    Hi All,
    I am facing a problem where in, the generated EWA  report for our XI system is not poplated with the complete data. This problem is there from past 2 months and before that this EWA report for XI system was duly generated with full and correct data.
    There has been no changes in the recent time and all of a sudden this problem erupt. May any one help me in diagnosing this problem and solving it? Help is greatly appreciated.
    Should there be any queries, please do ask me.
    Waiting for your kind replies.
    Regards,
    Faisal

    Hi Faisal,
    Last time I asked you if the Red flag was gone.
    You are saying the ABAP data is missing.
    This would mean there is a Rated EWA report missing the ABAP instance data.
    Does this mean it is a dual stack and the Java data is present.
    EWA is a pretty straight forward process, so if you follwo the process, you can usually narrow down where the problem has occurred.
    If ABAP data is missing in a generated EWA report, the first place to look for that missing data is in the service session.
    You can view the service session by clicking the eye glasses under tha activity column in DSWP, or entering the session number in transaction DSA. If the data is mssing, then it never got to solution manger from the managed system, so you would then check the RFC functions and the RFC user has a valid logon, THere would be no point checking SM:EXEC:SERRVICES, or authorizations if the data is not int he service session.
    If the data is in the service session and is missing, then it would be in the processing of the session into a Word ot HTML document, not the processing of the service session, because it would be processed and rated already by SM:EXEC SERVICES..
    I had explained that you create an EWA and it is scheduled in DSWP > Solution Monitoring > Earlywatch Alert
    it creates a service session, with a number and a tree. This is determined by the defintions in SMSY and the mapping to the DMD. It is scheduled for a date and time. On the managed system via RFC throught the maintenance package task in SDCCN or perhaps a scheduled refresh session taask, runs and via RFC to SOlman, logs on with the RFC use (SM*_BACK) and gets the
    session numbers of unprocessed servies sessions for that SID. If it can't open the service session, it will just find not sessions to refresh. If it can, then an EWA task is created that will prepare a transport with the collected data. So if the collectors have issues, data won't be available. ST-A/PI and ST-PI are involved on colelction of data and preparation for transport on managed systems. But there is also SAPOSCOL and ST03 and ST06 that need to be checked. The SDCCN EWA task log. Then it sends the data back to Solman via the RFC and either the single Flask or the red flag will then turn to 2 flasks indicating the data is ready to be processed by SM:EXEC SERVICES. SM:EXEC SERVICES processes the session, populates it, and rates it.
    Then you can look at the session in DSA o DSWP, you can geerate the report in Word or HTML.
    So this is the process.flow overview. And it helps to know where it gets to in the flow to determine where something went missing or if it was ever there at all.SM:EXEC SERVICES doesn't colelc the data. So if it processes a service session the user had the authorizations. If the data is not int he service session its because it was never passed to Solution manage.
    Iif the data is in thd service session, but missing from the report, then the issue is likely with ST-SER, or perhaps SCU.update has not been applied.
    I suspect that the data is not in the service session and you are still having issues. Is the EWA still red flagged? Yes or No?
    If yes, then you still have an issue where no ABAP data was sent via SDCCN to Solman. If no, then likely there is an issue with
    collection, where data is being sent, but some data is missing, and this could be due to errors that have not been addressed in the SDCCN task logs. Or it could be problems wit SDCCN service definitions, and may need to be replaced.
    I hope tis helps.
    Regards,
    Paul

  • Error when scheduling WEBI report to FTP server

    Hi
    We are getting error "destination directory error. CrystalEnterprise.Ftp: 550 Requested action not taken" while scheduling WEBI report to FTP server.
    Any help would be appreciated
    Regards,
    Anisa

    Hi All,
    I want a run my report once by scheduling, so i provide a time interval for scheduling a report
    start date/ time : 11:38:AM 10/30/2011
    end date/time : 11:43:AM 10/30/2011
    after completion of end time....report is failed and fetching an error
    Error : Object could not be scheduled within the specified time Interval
    Any solution for resolving this error

  • Error running reports from Crystal Server XI R2 with datasets

    Hi, sorry if my english is not good. I'm from Spain.
    I have a problem. I'm programming with Visual Basic .NET 2008.
    I'm using Crystal Reports Server and programming under Visual Basic to take reports from crystal Server, changing the tables from the report to datasets and scheduling this report.
    Crystal server change connections to CrystalReports.Dataset.
    Preview reports from server sends me an error "DataBase connector unknown"
    If I run this report (with datasets) into my VBNET application (into a  CrystalDecisions.Windows.Forms.CrystalReportViewer control), IT WORKS!!!
    I need help because I need to schedule these reports (to send them by email, export to PDF formats, ...)

    Reporting off of a dataset is reporting off of a disconnected datasource.  The reason your application works is beacuse you most likely populating a dataset in your application and passing it to the report at the same time.  When scheduling, there is no interaction with the report so unless the report is using an xml file on disk as its datasource, how can it retrieve data?
    To get around this, you can build a dll (.net data provider) that returns either a dataset or datatable and point your report to this dll.  this way, when the report is executed, it loads the dll which fetches the data for you.
    - so the first step is to compile a dll that returns a dataset or datatable.
    - to design your report off of this dll open the database expert and create a new ADO.NET connection.
    - in the File Path area, click the ellipsis ("...") button to browse to your dll and make sure the selected File Type is ".Net DataSet Provider".
    - once the dll is selected, you can choose the dataset/table returned by the dll.
    If your method in the dll is parameterized, it will add a parameter to the report (similar to stored procedure parameters.
    note: the location of your dll must be in the same path on the CR Server as it was when you designed your report in order for it to be loaded correctly.  I usually put the dll in a folder that I know will exist on both machines.
    Dan

  • Short dump when running EWA report

    Dear Expert,
    I got error dump when generating EWA report: OBJECTS_OBJREF_NOT_ASSIGNED_NO
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_GUI_GP=====================CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
         caught in
        procedure "IF_GRAPHIC_PROXY~EXPORT" "(METHOD)", nor was it propagated by a
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component.
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    Missing RAISING Clause in Interface
        Program                                 CL_GUI_GP=====================CP
        Include                                 CL_GUI_GP=====================CM017
        Row                                     1
        Module type                             (METHOD)
        Module Name                             IF_GRAPHIC_PROXY~EXPORT
    Trigger Location of Exception
        Program                                 CL_GUI_GP=====================CP
        Include                                 CL_GUI_GP=====================CM017
        Row                                     19
        Module type                             (METHOD)
        Module Name                             IF_GRAPHIC_PROXY~EXPORT
    Please advise asap since we need the report immediately.
    Thank you in advance,
    Rudi

    Hi,
    [This note|https://websmp109.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=944541&_NLANG=E] will solve your problem.
    feel free to revert back.
    --Ragu

  • Missing data in weekly EWA report

    Hello SDN,
    I have run weekly EWA reports for our productive ECC5 system through SolMan 3.1 for some time, but recently I've noticed that some information is missing from the report.
    Section 11.2 (Response Times) includes a graph showing the Top 5 transactions. The transactions are listed as Transaction 1, 2, 3, 4 and 5 on the graph and there used to be a table below the graph that showed that (e.g.) Transcation 1 was MMBE, Transaction 2 was LT27, etc..
    For some reason, that table no longer appears and the graph is of no little use on its own, because I have no idea what transactions it refers to.
    Has anyone else experienced this problem?
    Thanks,
    Arwel Owen.

    Hi Ragu,
    The strange thing is that this table used to be displayed up until around 6 weeks ago, when it just disappeared off the EWA report. Nothing was changed (knowingly) to cause this. Also, the graph that the table refers to is still included in the report, it's just the table that's disappeared. If anything had been changed, I would have expected both graph and table to change.
    Thanks for your help.
    Arwel.

Maybe you are looking for

  • How to know whether object is locked

    Hi All Experts, Which table holds the dynamic objects(Lets say a PP order) which are locked. I mean lets say I am editing some PP order 012344567 through tcode CO02 and after this in another session this PP order is also in use in some other transact

  • Bypass proxy settings ignored

    Hi folks, At work we connect to the web via web proxy (Squid by all accounts). If I set the proxy manually in my browser, everything works fine but I'd rather have that set at Network prefs level. However, when I add *.local, 169.254/16 at Network pr

  • Can't Send Link via IM (azlyrics)

    I just tried to send my husband a link to azlyrics, but it kept coming up as 'This message has been deleted' for him. In my chatbox it looks fine. I then tried to send it to a group we're both in, and though I get the yellow alert with the exclaimati

  • Cant find Mac address BBT Hom Hub 2.0

    Hi, I have my NAS severe connected directly to my HH. Everything has worked fine for months, I had port forwarded some ports on the router so that I could access  my Nas externally. All of a sudden, ports are blocked and I cannot find my NAS device o

  • Print Screening

    How do i print screen (screen shot) on a macbook pro?