EWA state="data is available" but there is no "SM:EXEC SERVICES" job

Hi everybody,
i have a Problem with EWAs. It seems to work all fine, it does, until the EWA is in the state "data is available".I can generate a EWA without a problem, when i use the button "start service processing", but i want it to be generated automatically. I searched with TA SM37 for the job SM:EXEC SERVICES in SolMan and in the monitored system, but i didn´t find the job?
Any ideas, what the problem can be?
Best regards,
Stefan

Hi,
@Rohit
Thank you for your reply, but this was not what i looked for. Thank you anyway!
@David
Thanks, i will check my system and look at the table, i think this is a good beginning. Unfortuneately the note is at the moment not available....
I am going to give feedback, if i found the finally solution!
Bg,
Stefan

Similar Messages

  • I have a desktop imac with snow leopard 10.6.8 OS  I have a time capsule that shows all restore dates of 2009 but there is a Jan 2012 restore that is faded looking and will not open to be restored.

    I have a desktop imac with snow leopard 10.6.8 OS
    I have a time capsule that shows all restore dates of 2009 but there is a Jan 2012 restore that is faded looking and will not open to be restored.
    Thanks for any help you may give.

    Whatever is in the Finder window wasn't backed-up on that particular backup.
    See the pink box in Time Machine - Frequently Asked Question #15A

  • No data in cube,but there is data in F and E table, also in dimension table

    Hi, gurus,
         I successfully loaded more than 100,000 records of data into an infocube, but when I check the content of the infocube(without any restriction),  unexpectedly no data displayed, also after I checked the F and E table, still no data, but there is data in dimendsion tables. what happened?
        please help. thanks a lot.

    Hi Kulun Rao,
    Try the following options.
    Check in the selection screen
    Go to infocube through LISTCUBE t.code
    Check the compression and roll-up statuses.
    Check the reporting status in request tab.
    Refresh the cube ( u already do it)
    Check the index status in Request tab**
    might be these things will help u.
    Regards,
    HARI GUPTA

  • The i tune music library cannot be saved because there isn't enough memory available. (but there is more than enough)

    Hi
    I'm re creating my library and a window keep appearing saying that " my music library cannot be saved because there isn't enough memory available". There more than enough memory for what I 'm doing and I don't know what to do.
    Please some help
    thank you !!

    For resolving your issue, you are able to do as the followings :
     1.Close  any SkyDrive related process
     2.Open  a command prompt (not PowerShell), and change to the directory where Microsoft Office 2013 is installed by typing the command below:
     cd C:\Program Files\Microsoft Office\Office15\
     3.Then type “groove.exe /clean /all” to clear all SkyDrive Pro cache and settings, setting it back to default again
    Here is a similar post for your reference:
    http://www.mokonamodoki.com/skydrive-pro-critical-error
    If the issue still exists after doing the above steps, actually we have a dedicated support team regarding this kind of issue. I recommend you post a new thread in another forum where is staffed by many experts focusing on the Microsoft SkyDrive Pro client
    issue.
    If this helped you resolve your issue, please mark it Answered

  • On my iTunes page it keeps telling me there are updates available but there are not.

    In my iTunes account it tells me i have updates available however when i go to do the updates there is nothing to update. Finding this really annoying and would like to get this fixed. Anyone got any tips?

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • My IMAC recognises an external drive but won't let me save to it.  Message is the there is no space available but there is 500G left.

    My IMAC recognise an external drive but won't let me save video or files to it.  Error message is that there is not enough space but the drive is 500G.
    Only just started happening a week ago.  Same with USB drives.
    Regards,
    Robert

    How much is "plenty of storage"? Go to Settings>General>About>Available
    The GB size of the download file is the compressed size (like .zip or .dmg). When the file is installed/uncompressed it can be 2-3 times larger.
     Cheers, Tom

  • E65 No Software Updates available - but there are

    Phone CODE: 0536850
    Nokia E65 (RM-208) firmware version 1.0633.18.01
    Latest version is 2.0633.65.01
    Using Nokia Software Updater v1.4.14en I get :
    No software updates available for your phone
    Is anyone else having this problem .

    You need to upgrade your OS, if your Mac meets the requirements below) to Leopard OS 10.5.
    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • UltraFlix: Sony blog states Ultraflix is available, but can't see app

    According to the Sony blog:
    http://blog.sony.com/2015/04/new-exclusive-4k-content-coming-to-sony-4k-ultra-hdtvs/
    Ultraflix is now available on 2014 models:
    "Also, UltraFlix is now available on Sony’s 2014 4K Ultra HDTVs"
    However, I can't see the app anywhere, and other owners I know also can't.
    I've tried:
    Redoing network set up
    Refresh Internet Content.
    Can someone from Sony please confirm what's going on.

    i'd like to know also. My 850B is updated & I can't find it. What is up with Ultraflix? We have it or we don"t?

  • "No data to retreive" depending selection but there are data

    Hi folks,
    It's happening something really weird in a webi we have built.
    We have a webi report built on a query bex - olap connection.  In the query we have a variable which is 0PLANT, it's a hierarchy variable; in the webi itself we have specified the rest of variables, amongst then Document Date (0DOC_DATE).
    If we run the report choosing different values just in 0PLANT and 0DOC_DATE variables, webi shows data... sometimes!
    Case 1)
    0PLANT = the top hierarchy node
    0DOC_DATE = 01.10.2013 - 31.12.2013
    Data -> ok
    Case 2)
    0PLANT = the top hierarchy node
    0DOC_DATE = 01.01.2013 - 31.12.2013
    No data to retrieve, which is a nonsense because at least there are date for the last 3 months
    Case 3)
    0PLANT = a minor hierarchy node
    0DOC_DATE = 01.01.2013 - 31.12.2013
    Data -> ok
    As you see, sometimes reports shows a message saying "No data to retreive" but there are data.
    We are thinking when we make a huge selection, as webi would show a huge amount of rows, instead of giving a "time-out" or another error, is saying that "no data to retreive".
    What do you think?
    Thanks

    Hi,
    After having done lots of executions and tests, we think we have found the possible explanation. It turns out that this report has a lot of dimensions (around 30) as "free dimensions", I mean, not shown directly in the report, but possible to include them once run.
    It seems that when a webi is executed, BO looks for all data, independently it's or not in the default view. We have removed all dimensions, remaining just those which are really needed, and webi worked!
    It looks like it was a kind of time-out error.
    Extrange.
    BYT Koen; case1 is january, and case2 is october (I should have put a more visible example lol)
    Thanks

  • I've upgraded to Yosemite. Iphoto is out of date and won't open. I'm being directed to the app store for a free upgrade but there is nothing there. being told 'upgrade is not available in the US'

    I've upgraded to Yosemite. Iphoto is out of date and won't open. I'm being directed to the app store for a free upgrade but there is nothing there. being told 'upgrade is not available in the US'

    iPhoto is no longer available from the Mac App Store. Update to 10.10.3 and use Photos.
    (125792)

  • Availability reporting or EWA availbilty data

    Dear all,
    I need some information about the availabitliy report of a system, urgently.  In my EWA report , the availability of a particular system is showing as 40%, but my system was not down. I do understand the availabilty report calculates the availability of the work process at a particular time and based on that data, the % of availabiliy is calculated.
    Now what I want is:
    1. Is there any document or SAP links which speaks about how the availability of a system is calculated, so that I can show that to my customer and inform them that this does not mean system was down for any time.
    2. Is there any way to calculate the real availability of my system; not calcuating the % of availability of the work process. The availability should reflect the up time of the system and down time.
    Any help will be appreciated. 
    Regards,
    Rajeev.

    >
    Rajeev P wrote:
    > Dear all,
    > I need some information about the availabitliy report of a system, urgently.  In my EWA report , the availability of a particular system is showing as 40%, but my system was not down. I do understand the availabilty report calculates the availability of the work process at a particular time and based on that data, the % of availabiliy is calculated.
    System availability in EWA is based on availability of entries in OS Collectors log, which are created every hour.
    Actually, you should not use this not very precise indicator  to check contract fulfillment.
    CCMSPing based system availability monitoring provide accurate and precise data.
    Ruediger

  • Soft ware updater shows that there is an update available (apature) but there is no way i can find to install the update ML

    Imported some pics from my iphone to my laptop using apature. From the default foldere I created a new project using the new twb. For the first time I used the 'move selected items to folder'  And this is where my problems started,coppied pics took ages to show up. but 27 pics in the origional folder just dont show up even though it states that the folder contains 27 pics. can restore from the clowd but would like an easier fix
    The last thing that is just as frustrating is that updater is showing that there is an update available for Aperature but there is no way to install it I updated aperature before upgrading to >ML since then thi up date has shown up but will not install. GRRRRRRRR
    KaOz

    You cannot upgrade to another major release of Mac OS X via Software Update, since such upgrades - 10.5 to 10.6 or 10.7 - are not free. You will first need to purchase a copy of Mac OS X 10.6 Snow Leopard and upgrade your system, and then you can upgrade to 10.7 Lion. For both purchases you will need to call the online Apple Store, 10.6 and 10.7 both no longer being available for web ordering. For 10.6 you will get a disk, and for 10.7 you will get a code which you can redeem in the Mac App Store to which you'll have access once you upgrade to 10.6.
    Regards.
    Message was edited by: varjak paw

  • App Store icon shows updates available, but all apps up to date

    Just bought Iphone 5c, second day, App store icon shows updates available, but PC, store and other Iphones show none.  Tried resetting, updates to ios 8.02, synching, going through each app individually to see if there is an update, no luck.
    Wnen I reset, the icon shows a badge with 7 updates available.  I opened App Store, bottom right (update icon) showed the same.  Tapped it, the update screen appears (as normal), and the 7 on the update icon disappeared, screen says UPDATES All apps are up to date.  However, on the home screen, the App store badge still shows 7 updates.
    Anyone else having the same prob?  What is the fix?

    Tried that, tries a soft reset, and a hard reset, no luck.  Funny thing is, my other iphones and IPad work fine, its just the Iphone 5.

  • FF67 problem, can't change statement date(statement saved but not post)

    I need to change the statement date of a bankstatement. I did not post the statement yet.
    I used a wrong statement date, and I want to change it, but I saved it after booking the second screen(the one with the
    statement items)
    When I look by Manual Bank Statement Overview I see the bankstatement, but it has no Posting complete remark yet, because it has not been postefdofcourse.
    The problem is I can't change the statement date, because when I try to Post then the systems gives an error because it does not accept the new statement date I want to use.
    Is there a way to solve this problem? The statement has not been posted yet, so I suprised I can't change the statement date.
    Anyway I hope somebody can help me out.

    I had to post them first because otherwise it looks I could not delete the statement.
    I saw no Id with only saving, that's why I post them. then the statement got an id.
    What do I have to choose to make it possible to delete statements, not posted yet.
    I guess I have to select something else because I did not see any Id to choose.
    I do a manual input of the bankstatements (no import).
    Whst's the best I can do now?  What do you mean with FI?
    I guess I can do a manual booking on the three(send/receive and general) bankaccounts to get the right position of the accounts?
    The bankstatements are ok(booked with ff67) only the three accounts I mention above have the wrong position.

  • PSA Request struck in yellow state if no data is available

    If there is no data available in the source system then the PSA reuest in the Datasource is not updated as sucess rather it is struck in yellow state.
    However, if there is data available then there is no issue.
    We are running a delta load through a Process chain and daily we have to manually set the satus to sucess for the chain to continue its execution.
    Any help would be appreciated

    Time out time(TOT)
    This settings are useful when we have huge data and load will take more time. in general default  time out time maintained some number(ex 7hours). 
    when that time was crossed we get time out time error for info pack. in that case we need to increase the wait time for info pack.
    Treatment for warning(TFW)  - if we receive any warning during the load in default request will be red.  in generally warnings are allowed. once you check what is the warning, after that accordingly warning message you can make request to green.

Maybe you are looking for