[EWS][FastTransfer][MS-OXCFXICS] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

Hi Haiyang,
Your questions are not covered by the Open Specification documentation and this is documented in [MS-OXWSBTRF] — v20141018 section “1.3 Overview”.
The upload and export data stream is an opaque format that only needs to be understood by a server implementation. The client only serves as a repository for the opaque data stream so that it can be uploaded to the server at
a later time.
You made good progress in interpreting the buffer using other documents. Why do you need to be able to parse the data? Please describe your project in details and I might submit a suggestion to document the layout of the data stream,
if your project justifies it. You can send the description directly to me.
Thanks, Vilmos

Similar Messages

[EWS][FastTransfer] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

OK. Thank you.
Today I build a stream with a paging rule as below:
1. Keep each page's byte length is 31680.
2. Make sure a complete property value in a page except binary type property whose value length is larger
than 31680.
And it can work very well when import the stream to the folder by EWS.

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

Question about setup_MITE in the PCI-MIO-16E-1

I have a quick question about setup_MITE in the PCI-MIO-16E-1. In one of the manuals, it states that if you're using Dell Optiplex GX series for our hardware configuration, is it true we need to re-write the MITE functions to correlate with the hardware? Please if you can clarify what this means, I would really appreciate it. Thank you in advance.

National Instruments is starting a new newsgroup to provide a forum for customers to discuss register level programming issues and ask questions. This newsgroup is not a direct support channel for register level programming, but may be monitored by National Instruments engineers. Please post you question with additional detail in:
natinst.public.daq.driver-development.general
Christian
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Another BW question about filter in the query definition

Hi ,
I have another question about filter in the query definition.
<u>Question:</u>
Which of the following objects can be filtered in the query definition?
A. characteristic
B. Key figure
C. Structure
D. Units
E. Hierarchy
My answer is A,B,D,E.
The answer in the book is A,B,D
Can anybody tell me which one is wrong?
Thanks in advance,
Liu Jia

HI
1.The answer could be A,B,D.you can not apply filters on hierarchies
2.Whenever there is a change in Attribute data(like Location,Num etc...)that has to be reflected in all aggregates of the cube.Thsi can be done by running "ATTRIBUTE CHANGE RUN".
sri

A question about some of the features

I have Vista so therefore am unable to use the trial version of photoshop elements. Before I go ahead and purchase the software, I had a few questions about its features.
I'll mainly be using photoshop to create digital scrapbooks. I know that photoshop comes equipped with themes and images, but I would like to know if I can use my own backgrounds and images. If I am able to use my own backgrounds, can they tile?
Another thing I would like to know is if I can create my own projects with custom dimensions.
Lastly, I'll be using photoshop to sprite. Is elements well suited for spriting? More specifically, does it have a color selection/replacement tool?

I use PSE for digital scrapbooking. Instead of using the "built in"
creations and albums, just create your own PSD files with layers of
whatever images/embellishments/background papers you want. You can
specify whatever size of creation you want when you create your PSD file
(you only have the choice of certain sizes when you use the built in
stuff).
Not sure about what you mean about making your backgrounds tile, but I
think it is possible. You can take a "background" paper, do a selection,
and then define a pattern and fill it. Or, if you mean layer your
background papers - yes you can do that too. (Here is my online
scrapbook pages, all of which were done in PSE 4 or 5:
http://www.scrappersguide.com/forums/gallery/showgallery.php?cat=500&ppuser=413)
You can select by color (using the magic wand tool) and you can replace
color, but it may not work exactly as you expect. (I also don't know
what spriting is.) But, many people just use a hue/saturation adjustment
layer to change colors.
-Trish

Quick Question About This Error "The movie "thedarkknight" could not be use

This is the Error:"The Movie "The Dark Knight" could not be used because the original file could not be found. would you like to locate it?"
Accidently Deleted my I-tunes folder, and its not in my recycle bin, read all the support pages, and it told me if its not backed up and its not on my computer I have to re buy all my movies? <-----IS THIS TRUE?
Is there an option to re-download my already payed for content?
Is my content gone forever? and I can only get it back by buying it again?
Please help thanks.
Message was edited by: BunnyCarrot

First thing - this is a worldwide forum so anyone who knows the answer could be asleep when you post this, so expecting a reply within thirty minutes and bumping when it doesn't arrive, is unreasonable.
To answer your questions though;
BunnyCarrot wrote:
... if its not backed up and its not on my computer I have to re buy all my movies? <-----IS THIS TRUE?</div>
Yes, afraid so.
Is there an option to re-download my already payed for content?
No
Is my content gone forever? and I can only get it back by buying it again?
Yes.
Phil (in the UK)

Question about shutting down the middle tier while leaving the DB up

Hi,
We just successfully upgraded 11.5.10.2 from running on 9.2.0.8 SOLARIS SPARC 32-bit to 11.2.0.1 SOLARIS SPARC 64-bit.
I am in the process of rewriting the backup scripts. We used to do a once-a-week backup (zip) of the middle tier directories,
after shutting down EVERYTHING cold (MT first, then DB listener, the DB). Our DB consultant likes hot-only backups of the
DB so we are going to keep the DB running all the time and always do hot backups from the DB, but keep MT cold backup.
We want to keep our MT cold backup so we retain our downtime window that users expect (Saturday night - Sun morning).
So my question is ---- is there any issue with shutting down the entire MT- only (adstpall.sh) -- but leaving the DB up?
When I do a adstrtal (via my script) the next morning--- everything should just start fine with no DB bonce having been done, right?
In the past, once I have the MT down, wait 5 min, kill any stray FND processes, I usually go on to bounce the database
"for good measure". I am 99% sure that I don't have to do this... and that there is no harm in "not" doing this, just need
some confirmation.
MH
One more piece of information - Our concurrent managers shut down cleanly almost all of the time without putting jobs on hold.
We don't have many users (< 60) and while we do have autoinvoice that runs every 5 min, I haven't had to do a big bounce
with cmclean.sql very often-- only about once or twice a year when users lock each others tables and the cleanest fix is to bounce
everything --very rarely.

Hi,
So my question is ---- is there any issue with shutting down the entire MT- only (adstpall.sh) -- but leaving the DB up? There should be no issues.
When I do a adstrtal (via my script) the next morning--- everything should just start fine with no DB bonce having been done, right?Correct.
In the past, once I have the MT down, wait 5 min, kill any stray FND processes, I usually go on to bounce the database
"for good measure". I am 99% sure that I don't have to do this... and that there is no harm in "not" doing this, just need
some confirmation.You still need to wait for sometime for the CM to shutdown, that's all.
One more piece of information - Our concurrent managers shut down cleanly almost all of the time without putting jobs on hold.
We don't have many users (< 60) and while we do have autoinvoice that runs every 5 min, I haven't had to do a big bounce
with cmclean.sql very often-- only about once or twice a year when users lock each others tables and the cleanest fix is to bounce
everything --very rarely.You should be OK with your approach.
Thanks,
Hussein

Why can't someone from apple answer my question about upgrading to the current version of Itunes

I am amazed that I have been posting questions for months about this issue and no one has given me an answer!!!! Does Apple not track these discussions?
I have Windows 7 64-bit and am trying to upgrade Itunes to the current version, with no suggestions.
I have found and tried the 64-bit installer and receive the following message:
'This itunes installed is intended for 32-bit versions of Windows. Please download and install 64-bit Itunes installer instead.'
I have itunes 9.1.1.12 currently installed.

Okay ... it's behaving just like the PC Mover thing. 32-bit versions of iTunes and AMDS have somehow been jammed on the PC. When you go to uninstall either of them, the 64-bit Windows installer service encounters 32-bit installation configuration information, goes into a fantod, and you get the error message.
So we'd better try clearing away that installation configuration information, and then trying another update.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
Next, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Question about how Mac OS X stores file information for iMovie and iPhoto

I'm relatively new to Macs (am using a 3yr old iMac and a new MBA running 10.6.4 and iLife 11) and I have this general question.
I'm using the iMac for a lot of Movie projects and photos. I've very quickly filled up my 500Gb hard drive and I don't understand why other than this:
I import a movie using iMovie and it's stored in an Events folder. I then make a project and it's stored in an Projects folder, I then share it to iTunes and it's stored in the iTunes Music/Movies folder. And I also see the movie in an iMovie Shared folder. In other words, it appears that a 2Gb movie (as an axample) becomes about 10Gb because it's saved in multiple places. Must I keep all of them?!
With iPhotos, I've imported about 6Gb of photos from my Windows PC. No problem. I copied across all the directories and then imported them into iPhoto. I then thought I could delete all the directories as the iPhoto folder became 24Gb in size! Not sure how but it seems that as well as keeping my original 6Gb of photo directories it's also put them into the iPhoto directory and somehow made it a big folder size?! If I delete the original folders (since they're now in the iPhoto app folder) then I can't actually browse the JPGs files can I except from within iPhoto only?
I've got about 80Gb of music, about 6Gb of photos and about 80Gb of movies. Somehow it's pretty much filled up 500Gb of hard drive (and very little other programs or files other than the normal iMac stuff it comes with) because of the way the Mac (iTunes, iMovie and iPhoto) seems to have the same thing copied everywhere.
All input greatfully receive and apologies if I'm being thick.
Richard.

Richard
I'll answer the iPhoto part for you.
If you use iPhoto in its default setting then the images are copied into the Library on import. Yes you can now delete the directories you have copied over.
then I can't actually browse the JPGs files can I except from within iPhoto only?
Yes and no...
The point of iPhoto is that it's your Photo Manager. It's the "go-to" app when you want to do anything with your Photos. - View them, edit them, email them, print them, use them in other apps, upload them whatever - all of these things are done from iPhoto.
There are two advantages to working this way.
1. You get to work with your Photos and don't have to think about files. This means the organisation possibilities are much greater than just files in folders. You can use Keywording, Smart Searching, Albums, Events and a plethora of other bases for categorising and therefore find your pics.
2. iPhoto is integrated throughout the entire OS. That means your Library is available throughout the OS without iPhoto being open by means of Media Browsers. You can search your Library from a MEdia Browser and so on.
So, while, yes, the files are not browsable via the Finder, there's no need to. Everything you need to do can be done with iPhoto.
Want to edit the pics in something other than iPhoto:
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

General questions about subscriptions in the context of application exports

Hello,
I have two sample applications (Apex 4.0.2), a "master" one and a "subscribed" one, which has a page template subscribed to a page template in the master app.
Looking at their export files, I see:
- Master app:
-- This is the master template
wwv_flow_api.create_template(
p_id=> 32173830131265449 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',- Subscribed app
-- This is the subscribed template
wwv_flow_api.create_template(
p_id=> 19843209078190645 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',
p_reference_id=> 32173830131265449,
p_translate_this_template => 'N',
p_template_comment => '');
end;A couple questions to help me understand how things work behind the scenes:
- Just out of interest, in the subscribed app export shouldn't it be p_reference_id=> 32173830131265449 + wwv_flow_api.g_id_offset to keep things in sync?
- If I export both applications from my workspace, delete them and re-import them (first the master, then the subscribed) the subscription remains valid. On the other hand, if I import them into apex.oracle.com, the subscription is lost. Is this the way it should be? Is there a way to keep the subscription?
Thanks
Luis

Hi Moni,
In case of business service you are only defining interfaces in integration directory. It can use more then one software component version. You need to transport content in sld only in such case when you have development, quality and production sld.
/wojciech
> Hi,
> When we use Business system, there will be
> corresponding Technical System, and associated
> Products and SWCV. So it is very clear Where to
> declare my SWCV in SLD. And no confusion about
> transporting SLD objects.
> But with Business service, It is not declared in
> SLD, So there is no related Technical System, no
> product. But I need to define SWCV so that i can
> import in to repository to define my design
> objects(DT,MT,MM etc).
> Here are my questions.
> 1. In which Product i need to define the SWCV?
it doesn't matter
> 2. Do i have to have a product associated with every
> SWCV?
actually all swcv should be in some product
> 3. Do i have to have a Technical system when i use
> Business service?
no
> 4. How do I transport SWCVs from dev SLD to TEST SLD,
> without Technical system and Business System?
I don't know.
> 5.Do i need to transport the SWCVs from dev SLD to
> test SLD as it working fine without doing SLD
> transport?
>
In my opinion you have to. But the best configuration is only one sld for whole landscape than you don't have to transport it.
> Thankx
> Moni
<i>** Please reward points if found it useful **</i>

Question about repeating in the process chain

Hello Gurus,
        my DTP is set as "valid records update, no reporting (request red)", and put into a process chain. the process chain goes wrong on this DTP due to some erroneous records. my questions are:
   (1) based on DTP configuration, all the records are transferred to target successfully except for those erroneous records. is that right?
   (2) after I correct those erroneous records in PSA, I repeat this DTP process in the process chain. what exact data are transferred by this repeating operation on this DTP? do we need to take care of all the previously loaded data for this subsequent repeat loading ?
Many thanks.

Hi ,
Please refer my article for your answer, also this has lots of good DTP features.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10339304-7ce5-2c10-f692-fbcd25915c36?quicklink=index&overridelayout=true
(1) based on DTP configuration, all the records are transferred to target successfully except for those erroneous records. is that right?
Yes. All the erroneous records go in the error stack and then you can fix the errorneous records there and execute the error DTP.This setting ensures, incorrect/incomplete data is not available for reporting.
(2) after I correct those erroneous records in PSA, I repeat this DTP process in the process chain. what exact data are transferred by this repeating operation on this DTP? do we need to take care of all the previously loaded data for this subsequent repeat loading ?
No records are transferred on repeating teh job. We need to manually set the status of request to Green.Yes we need to take care of all the subsequent steps.
-Vikram

Urgen question about uploading clips (the 1000th post about it probably)

I uploaded a video which was in .mpg format. Imovie says that .mpg is incompatible for imovie, so i converted the video into an .avi format which does allow it. The problem is when i directly upload an .avi video into imovie it uploads perfectly and i can see it in the event, but when i convert the video into a compatible video format, it loads but it wont show up in the event. Please help me, and if you do not understand the question then please inform me so i can rephrase it. Thank you very much

im using any video converter, but whatever i convert it to, it ends up doing the same thing

Question about support of multiple languages by installer (after modification)

We are currently developing the plug-in of Adobe Illustrator CS5.
I have a question on how to support multiple languages by that plug-in.
I want to specify a path according to a language of Ai and then install the swatch file when installing the plug-in(Extension) by Extension Manager.
However, the swatch file cannot be placed in a desired path.
The folder of swatch libraries to which Ai refers difffers from language to language, so I want to place the swatch file only in an appropriate path according to a language of Ai...
    Japanese version of Ai    : [Ai installation path]/Presets/ja_JP/スウォッチ
    English version of Ai    : [Ai installation path]/Presets/en_US/swatches
*In the case that the plug-in is installed into Japanese version of Ai, the expected result is that the swatch file is placed only in "[Ai installation path]/Presets/ja_JP/スウォッチ.
As a way to place the swatch file according to a language of Ai, I described the following contents in MXI file(project.mxi) and then installed the plug-in.
    URL that I referenced : http://help.adobe.com/en_US/extensionmanager/cs/using/packaging_extens ion.pdf
--The contents of MXI file--
<macromedia-extension name="Extension Name"
name_resid="name_ID" version="1.0.0" ismultilingual="true" >
          -<omitted>-
<files xml:lang="en_US">
<file source="en_US/test.ai" destination="$presets/en_US/swatches"/>
</files>
<files xml:lang="ja_JP">
<file source="ja_JP/test.ai" destination="$presets/ja_JP/スウォッチ"/>
</files>
<files xml:lang="it_IT">
<file source="it_IT/test.ai" destination="$presets/it_IT/swatches"/>
</files>
When I installed the plug-in by the installer created by using the MXI file above, the swatch file(test.ai) was placed not in "$presets/ja_JP/スウォッチ" but in "$presets/en_US/swatches".
Is there anything wrong with the MXI file above?
Also, is there any way to place the swatch file in a desired path according to a language of Ai other than this way.
If someone knows it, please let me know.
[Implementation environment]
OS：
Windows7 Ultimate 32bit(Japanese version)
Software and plug-in:
Adobe IllustratorCS5(Japanese version)
Adobe ExtensionManagerCS5(Japanese version)
Adobe FlashBuilder4.6
Adobe ExtensionBuilder2.0

You might want to try the Illustrator SDK forum which may be able to answer your questions. Most people here are just users.

[SOLVED] Question about "loadkeys" from the install procedure

https://wiki.archlinux.org/index.php/In … ard_layout
https://wiki.archlinux.org/index.php/Be … the_keymap
# loadkeys ro_win
They show up as black squares... Even after generating these locales, as per the Beginner's Guide:
[root@archiso ~]# locale-gen
Generating locales...
en_US.UTF-8... done
ro_RO.UTF-8... done
ro_RO.ISO-8859-2... done
Genetation complete.
What do?
PS: I noticed that they're activated with "Alt+Shift". There's no mention in the Install Guide or Beginner's Guide about this. Heh.
Last edited by DSpider (2012-08-24 14:45:34)

From the LiveCD (in VirtualBox):
# nano x
<wrote these characters>
# cat x | curl -F "sprunge=<-" http://sprunge.us
And they show up fine: http://sprunge.us/MKBj
ăîşţâ
ĂÎŞŢÂ
Until a better explanation comes along, I've added this info to the BG:
Don't worry if some of the letters show up as white squares or as other symbols. It's probably just the console font missing those glyphs. The glyph codes are correct and if you press the correct keys they will show up fine when (or if) you set up a graphical environment later.
https://wiki.archlinux.org/index.php/Be … the_keymap
I guess I can mark it as solved...

[EWS][FastTransfer][MS-OXCFXICS] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Similar Messages

Maybe you are looking for