Example "sample test report" doesn't run - Error -1073741819
I am trying to run the "Sample Test Report.vi" example in a totally unmodified version. I receive the message
"Unknown System Error in Font Style.vi->Set Report Font.vi->Sample Test Report.vi"
I have some trouble finding where the error occurs exactly. Any ideas?
Best regards
Matthias
Attachments:
Sample_Test_Report_-_Error.PDF 67 KB
Hi Matthias
Check this knowledgebase:
http://digital.ni.com/public.nsf/websearch/5A42F1725790DFBC86256B900075F884?OpenDocument
Hope this helps
Luca
Regards,
Luca
Similar Messages
-
Crystal Report doesn't run on the production PC
I developed a report using VS 2005/Crystal Report. The report has three on-demand sub reports and some subreports. It runs well on my PC, but doesn't run on the production PC, on that PC, I only can see the report header or few columns. The difference (I can tell) between my PC and the production PC is my PC has VS 2005 installed.
Is there anything I can do to make the report running on the production PC?
Thanks.Hi Jhon,
Have you installed the runtimes of CR of VS2005 on your server, if not than please install from(only applicable if you are using the bundle version of CR i.e. CR 10.2 which comes with VS 2005) [here|http://resources.businessobjects.com/support/additional_downloads/runtime.asp#07].
Note- use the appropriate version of merge modules for 64 or 32 bit machine
hope this works
Regards,
Amit -
Scheduled Report Fails To Run If User Password Has Expired
Why can't a report, that has been scheduled for a user whose password has expired, continue to run and go to its predefined destinations?
A user doesn't know until he/she attempts to log in that there is a password expiration issue. They may have scheduled the report to go to a multitude of inboxes, but if their password has expired, the report doesn't run.
I can understand "some" issues with the necessity to stop the report until credentials are updated correctly. However, Business Objects doesn't notify a user until it has expired, thus making it too late for those expecting something in their inbox.
Is there any method of notifying users that their password is going to be expiring soon, in advance? In other words, is there any "proactive" feature within Business Objects for notifying the user of an upcoming need to change their password?
HepMeThere is nothing built in to BusinessObjects for this, but there may be third-party tools available or you can write code that would do this.
In Query Builder, run this query:
Select SI_ID, SI_Name, SI_LAST_PASSWORD_CHANGE_TIME, SI_UPDATE_TS, SI_LASTLOGONTIME
from CI_SYSTEMOBJECTS where SI_Kind = 'User' and SI_NAME != 'Administrator' and SI_NAME != 'Guest' and SI_PASSWORDEXPIRE = 1
order by SI_LAST_PASSWORD_CHANGE_TIME desc, SI_UPDATE_TS desc
Users who are new and haven't yet changed their password will not have a value for SI_LAST_PASSWORD_CHANGE_TIME, so you can use SI_UPDATE_TS to determine when they were created.
You could build an application that uses this query to determine who is getting close to password expiration and send out an email reminding those users to change their passwords.
-Dell -
Error while running test report
I have just installed oracle application server 10g 10.1.2. on redhat linus AS4 on dell 64 bit machine.
forms servlet works fine but when i use the following url to access test report
It gives a very famous error error "REP-51002: Bind to Reports Server *** failed "
http://zeropoint:7779/reports/rwservlet?report=test.rdf&destype=cache&desformat=pdf
everything in infrastructure and application server middle tier is working fine.
the URL
http://zeropoint:7779/reports/rwservlet
Works fine
What might be the problem?
Regardshow are you martin
well i have checked at client side but same problem. the status of report server is
same as i told you after staring it through URL
its 1/0
i have done a freshj installation, but dont know why even after fress installation why isn't it working.
Let me tell you another thing. My client has not any DNS right now and they are using host file on client side to resolve the server name but they are running successfullly in same netwrok let me tell you another thing that they are using 10.1.2.0.2 on red had advance server 3 on a 32bit machine and the machine on which i am working right now is 64-bit DELL machine with red hat linux advance server 4. I have done same hing in my office on AMD 64-bit machine and there my reports server is running fine.
So do you think it might be a network problem? -
Hi!
I have silverlight 3 installed with Visual studio 2008. installation is fine.
I have created a silvelight application including a test page.
In my test page I used the "object tag" to call my application as it is suggested since silverlight 3:
<object type="application/x-silverlight-2"
data="data:application/x-silverlight,"
width="450" height="220">
<param name="source" value="MySilverlightApplication.xap"/>
</object>
At the run time, using the test page my application runs as expected. But when i call the same application in another page i have created, nothing happens: the web page is blank. I wonder why it works with the test page created at the same time with the
silverlight application ( i have checked the radio button that required the test paged creation during the process of the silverlight application) and why it doesn't work with a page created separately.
Thank you for your help!
JoelHi Andy!
Hi Qimin!
Thank you for your helps. But i want to let you know that the html code i wrote in my post is just an example so I will complete my post with more information.
0- I have visual studio 2008 installed with silverlight 3.
1- I have created a web project with a master page (my master page has a content page )
2- I added a silvelight application: carousel.xap (during its creation I've accepted to add a test page: carouselTestPage.aspx)
3- I added a main page Home.aspx: which inherits from the master page created in step 1, then I call my silverlight application in this content page using the object tag.
Result of the tests during run time:
My silverlight application carousel.xap works fine when I test it with the
carouselTestPage.aspx.
But my silverlight application carousel.xap doesn't work with the main page I added to my web project. the web content page is blank.
Here below the script of the carouselTestPage.aspx
and for the Pages_Home:
carouselTestPage.aspx code
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<title>carousel</title>
<style type="text/css">
html, body {
height: 100%;
body {
padding: 0;
margin: 0;
#silverlightControlHost {
height: 100%;
text-align:center;
</style>
<script type="text/javascript" src="Silverlight.js"></script>
<script type="text/javascript">
function onSilverlightError(sender, args) {
var appSource = "";
if (sender != null && sender != 0) {
appSource = sender.getHost().Source;
var errorType = args.ErrorType;
var iErrorCode = args.ErrorCode;
if (errorType == "ImageError" || errorType == "MediaError") {
return;
var errMsg = "Unhandled Error in Silverlight Application " + appSource + "\n" ;
errMsg += "Code: "+ iErrorCode + " \n";
errMsg += "Category: " + errorType + " \n";
errMsg += "Message: " + args.ErrorMessage + " \n";
if (errorType == "ParserError") {
errMsg += "File: " + args.xamlFile + " \n";
errMsg += "Line: " + args.lineNumber + " \n";
errMsg += " + args.charPosition + " \n";
else if (errorType == "RuntimeError") {
if (args.lineNumber != 0) {
errMsg += "Line: " + args.lineNumber + " \n";
errMsg += " + args.charPosition + " \n";
errMsg += "MethodName: " + args.methodName + " \n";
throw new Error(errMsg);
</script>
</head>
<body>
<form id="form1" runat="server" style="height:100%">
<div id="silverlightControlHost">
<object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%">
<param name="source" value="ClientBin/carousel.xap"/>
<param name="onError" value="onSilverlightError" />
<param name="background" value="white" />
<param name="minRuntimeVersion" value="3.0.40624.0" />
<param name="autoUpgrade" value="true" />
<a href="http://go.microsoft.com/fwlink/?LinkID=149156&v=3.0.40624.0" style="text-decoration:none">
<img src="http://go.microsoft.com/fwlink/?LinkId=108181" alt="Get Microsoft Silverlight" style="border-style:none"/>
</a>
</object><iframe id="_sl_historyFrame" style="height:0px;width:0px;border:0px"></iframe></div>
</form>
</body>
</html>
2. Home.aspx code:
<%@ Page Title="" Language="C#" MasterPageFile="~/MasterPages/MyMasterPage.master" AutoEventWireup="true" CodeFile="Home.aspx.cs" Inherits="Pages_Home" %>
<asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="MyContent" Runat="Server">
<object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%">
<param name="source" value="~/ClientBin/carousel.xap"/>
<param name="background" value="white" />
<param name="minRuntimeVersion" value="3.0.40624.0" />
<param name="autoUpgrade" value="true" />
<param name="enableHtmlAccess" value="true" />
<a href="http://go.microsoft.com/fwlink/?LinkID=124807" style="text-decoration: none;">
<img src="http://go.microsoft.com/fwlink/?LinkId=108181" alt="Get Microsoft Silverlight" style="border-style: none"/>
</a>
</object>
<iframe id="_sl_historyFrame" style="visibility:hidden;height:0px;width:0px;border:0px">
</iframe>
</asp:Content>
so the application source is correctly supplied in the object tag description. so I wonder why it doesn't work with a separate content page in the same web project and work with this embedded Silverlight Test page.
Thank you for your helps.
Joël -
PCI-6509 example program doesn't run
I can compile the "Write Dlg Chan-Watchdog Timer.dsw" sample program, but when I run it I get errors. Please help me to understand what I am doing wrong.
Attachments:
PCI6509_output.rtf 1 KBAnna,
When I tested this example with the PCI-6509, I did not receive any errors. However, if I intentionally delayed the resetting of the watchdog timer, I was able to generate the -200644 error. The following function performs this reset:
DAQmxErrChk( DAQmxControlWatchdogTask(wdTaskHandle, DAQmx_Val_ResetTimer));
Did you make any modifications to the example? To troubleshoot this issue further, you should try increasing the watchdog timer's timeout using the following function:
DAQmxErrChk (DAQmxCreateWatchdogTimerTask(device,"wd",wdTaskHandle,timeout,physChan,expirationState,NULL));
Spencer S. -
Scheduled Reports won't run - no error or entry in "History"
Hi,
I have a very basic CR setup to test the scheduling of Crystal Reports Server, and while it will run manually, in both view mode and if I "Run" it as a manual schedule.
The report emails out.
But on a schedule of "Every week day" at 4:30pm it just doesn't run. There is no entry in the history to indicate it failed - it is as if it didn't even run to be honest.
Any help is greatly aprecieated.check if your CrystalReport Job Server is running.
Regards. -
Page rendering process doesn't run after validation error
I have a page rendering process (On Load - After Regions) that needs to be run for my page to be rendered properly; however, it doesn't run when the page is rendered after a validation error. In debug mode, I see the following line:
"0.05: ......do not perform process because inline validation condition found."
Is this a bug? Validations are meant to prevent execution of On Submit processes, but is there a reason to also not run rendering processes?
I need to dynamically construct some javascript and insert it somewhere after a certain item on the page. Is there a workaround?
Thanks.
RodneyRodney,
Let me see if I understand your question:
1. A page is rendered
2. The page is submitted
3. A validation fires and fails
4. The page is re-rendered displaying the validation error message
5. Your on-load after regions process did not fire
You want to run a process in all cases; in the standard page load case (1) and in the re-load case (4).
You can do this by creating a region of type PL/SQL. You can give the region a null template so that it will not display any values. The region can be the last one displayed on the page; so that it will be run last.
You also asked if it is a bug that the on-load after regions process did not fire; as the debug message indicates this is proper. Here is an example that illustrates why you typically don't want to perform processes when rendering a page after it was posted causing a validation to fire.
Lets take the following example:
1. create a form on the emp table; assume a salary column called "SAL"
2. create a validation that says the salary must be numeric
3. edit a row of the EMP table
4. change the employee job from clerk to manager; and enter a "X" in the salary item
5. submit the page
6. the validation will fire; page processing will stop; and the page will be re-displayed
7. the process which fetches the rows will not fire; and the page will be re-displayed; the job item will display the change from "clerk" to "manager" and salary will still contain the invalid "X" value. If the process had fired it would have replaced the values in the form.
My recommendation is that you use regions for any processing that is UI releated. I hope this helps.
Mike -
i created test report from solution manager, when i try to run macro "SAP_CREATE_TESTREPORT" it gives error:
"Unexpected value for encoding type: 50"
i am using MS Word 2010, Solution Manager 7.0 EHP1
Please help
Edited by: Hasan Sidra on Nov 22, 2011 4:08 PMHi Hasan,
Try to In transaction SE38 run the report RSTWB_TESTREPORT_LOIO_CLEANUP once and afterwards try to create a new testreport.
this should solve this issue.
Also I'm not sure if this is the case but the 64bit version of office 2010 is not supported, so it may lead to problems in the future.
reference to note 1442028 - SAP GUI for Windows 7.20: No support for Office 2010 64bit
Kind regards, Fabricius -
Lockbox Sample test --- posting errors
Hi all !
I am running a sample test file for Locbox process and everythign is working fine as its saying customer uniquely identifies by micr number ... but I am getting all of the items as unprocessed and the error message is saying the following for all the items( I am using four checks in my test file and ts showing same message for all the four)
GL posting error (00 298): Formating error in the field COBL- PRCTR
AR posting error(00 298): Formating error in the field COBL- PRCTR
Algortihm 001 error(00 298): Formating error in the field COBL- PRCTR
Could somone throw somelight on this as I need to do this test config urgently.
Thanks
RegardsHi,
Please check the field status group of the Clearing account. Is the Profit Center field mandatory for the GL Account?
Thanks
Murali. -
Firefox will not start on limited accounts. It reports firefox already running. This happens even if no other users are logged on. Administrator accounts have no problems accessing firefox
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Error 7 while using test report VIs
I'm trying to figure out how to use the Labview test report VIs and I'm getting error 7 message. Please attached VI and error message. Does any one know this can be fixed?
Thanks
Attachments:
LabviewTestReport.vi 21 KB
Error 7.png 34 KBIt looks like your file does not exist. Have you created an .xls file by that name in the location?
-
Error While Genrating Test Report in Test Plan Management
Hi Guru's
I am getting an authorization error while generating test report via STWB_info.
Just i selected the test package and while click the test report i am getting this error.
Error during authorization check
Message no. TWBHS540
Guide Me to solve this issue
thanks in advance
regards
AnandhHi,
Please try the following:
Start transaction SMGENDOC03
Do not change anything but just hit the save button.
Afterwards restart transaction STWB_2 and try again to generate again.
Hope this helps.
Cheers
SH -
Error while executing the test report
Hello
i tried to execute the test report for adobe forms
FP_EXAMPLE_01 but it gave following error
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP response contains unexpected content-type(100,101).
is it due to improper configuration of ADS? we checked the ADS connection from SM59 which is ok and also the service /sap/bc/fp through internet which is also ok.
Thanks in advance.
Regards
Rajeevhello
i guess there was the problem of ADSUSER. Now i corrected that and the report FP_PDF_TEST_00 gives proper version of ADS.
But when i execute test report FP_TEST_00 it asks me about printer and when i clicked Print Preview it gave following error
"ADS: Request start time: Mon Jan 14 06:16:01 EST 2008(200101)".
when debugged the code i found error in the class "CL_FP_PDF_OBJECT->execute_internal()" method which is getting called from the FM FPCOMP_CREATE_PDX with error code as "l_errcode = cpdfe_pdf_exe_print_adserror"
but couldn't make anything from that. any clues?
Regards
Rajeev -
Hi!
I', m working with TestStand Version 4.2.1. I have a main sequence, which calkls different subsequences. All these steps are properly reported. One of subsequences runs as "new thread". How can I include its results in common test report of the main sequence?
I have markes variables of the subsequence as it is requred for test report (it works OK if it is not a new thread). If the the numerical test, which is executed in this subsequence is correct, I get no results at all. If the numeric test failed I get somewhere in the main sequence report a "red message", that test failed whithout any reference to the step or values of vaiables which were not correct.
I tried an option "On the fly" in the Report Configuration , but haven' got any useful results. What shall I do?
Best regards
Solved!
Go to Solution.Hi,
I tried it but without success:
1) I got a reference to the Thread as "Locals.Step1=RunState.Thread" for every of 2 steps which start a thread
2) I put both "Waits" after steps with (and without) threads, at the same place, where they were before
3) The sequence run OK, but when it came to Wait for Thread 1 it waited for ever, I had to terminate sequence
Does it mean, that I got a false reference (suppose No - please, have a look at attached pic)?
Or does it mean, that Waits are badly placed in the sequence (threads are already terminated)? Here is a pic of sequeces calls with Wait after them.
Regards
Attachments:
Thread.JPG 34 KB
SequenceCall.JPG 32 KB
Maybe you are looking for
-
Is there a way to include html link with applet?
I am thinking of writing an applet that would be useful to others, which I would provide for free. In return I would want a link from the pages that use the applet. It is important that the link is search engine friendly, a pure href html link that w
-
Sync-ing Library to New Device
My current library is tied to my 5th generation iPod. I'm getting an iPhone 4 tomorrow, and no longer plan on using my iPod. Will I simply be able to open my library, plug in the iPhone, and sync my existing library to the new device? Or will I have
-
Are there some Font supporting all utf-16 code including all supplementary?
Are there some Font supporting all utf-16 code including all supplementary code? In an application, I need to show some text encoded in utf-16, which is multilingual and Have some of supplementary character, so want to know a font to show it correctl
-
Tab control and Ring???
have a tab control, where results will be displayed on tabs A,B,C in my vi. i have a ring; of options 1,2,3 when i change them i get various results. (A-C correspond to 1-3) is there a way when i select '2' on my ring, it will bring up tab B?? hope t
-
Where is Flash on my Computer?
My OS is XP Pro. I have just downloaded Flash v. 9,0,28,0 and I can see the installation completion movie and text below (with IE 6 SP2). I actually had downloaded it earlier today and went to Add/Remove Programs because I didn't see Flash in my Star