Excel default worksheet for workbook template

Hi,
Is it possible on Excel 2010 to create a default worksheet template for a specific workbook template? For instance, if I'm using a workbook template and I click "New Worksheet" the worksheet has the custom headers and footers that I've preciously defined?
Thanks
Claire

On Wed, 8 Feb 2012 10:58:11 +0000, ClaireDublin wrote:
>
>
>Thanks however that isn't working for me.
>
>My template consists of a cover page and a blank worksheet - the blank worksheet has the headers and footers defined. When I use this template and insert another new blank worksheet it does not contain the defined headers and footers.
Back in XL2003, you could do that by storing a workbook named Sheet.xlt in the Excel Start folder. But I've never tried that in 2007 (and I don't have 2010).
Alternatively, you could use a macro in your workbook template to set up new sheets the way you want.
Ron

Similar Messages

Global default setting for workbook

Hi,,
In BI 7.0 Version ,,
I was creating a workbook template by my standard,,
Add to logo,,, date,, and user name
I save my workbook and then checking the perminent workbook setting,,,
But that is restricted onyl my user ID,,
so, i want to know about global default setting...
I was supposed that global setting is part of authrization object or other thing...
Thank you..

Hi,
Please refer the following link which will answer your question
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a551ce09411d2acb90000e829fbfe/content.htm
Its mentioned that
To use the selected workbook as the default workbook for all users, set the Global Default Workbook indicator. The indicator is only input-ready if the user has the necessary authorization. Authorization object S_RS_TOOLS is required. Field COMMAND must contain value THEMES.
Hope this helps you!
Rgds,
Murali

DB Column for Default Severity for SR template

Hi,
Does anybody know where is the Default severity for a SR template stored in Database?
I mean which table and which column.
I checked these tables but could not figure it out.
CS_TP_TEMPLATES_B
CS_TP_TEMPLATES_TL
CS_TP_TEMPLATE_ATTRIBUTE
Regards,
Mohammed

Hi,
Does anybody know where is the Default severity for a SR template stored in Database?
I mean which table and which column.
I checked these tables but could not figure it out.
CS_TP_TEMPLATES_B
CS_TP_TEMPLATES_TL
CS_TP_TEMPLATE_ATTRIBUTE
Regards,
Mohammed

Setting Default or Derived value for watermark template

Hi,
I want to set default value for watermark template id. The condition is like if dUser(Logged in user) is "a", then default value of template should be "1". I have created template in pdfwatermark administrator with contentid of template as "1".
How to write that idocscript?
Thanks in advance

Dear Kick,
There is no such option of default scrap value in IMG. You will have to put that amount in asset master.
If the data quantum is high then better to write LSMW or CATT
Regards,
Ajay

Default Workbook Template - BI 7

Hi ,
When we execute the query in BI 7, We have the report in excel with basic set of functionalities like filter, tables, charts etc...
Our requirement is to have the different reports to be saved in a workbook and each and every report as a seperate tabs.. Is there any way, we can set the template standard across the different tabs in the workbooks?.
We created a container and used to attach the queries in each and every tabs, but we are not able to get the standard functionalities that we used to get, while executing the queries.
Is there any way we can copy the standard template and just change the query name in across the tabs so that we wont miss any of the functionalities such as graphs, filters etc..
Kindly advice..
Thank You.
K.Manikanadan.

Manikandan,
I haven't played much in BI 7.0, but I guess it should be the same approach as 3.5...
Once you assign a Template as your "Permanent Workbook Template...", that's it, from now on all queries you execute will be based on that Template.
At the moment of having more than query in a workbook (different tabs or spreadsheets), just make sure you use "Insert Query" in the "Tools" button of the Analyzer toolbar... You have to insert each one of them...
Hope it helps somehow.
Regards,
Luis

Default Workbook Template

Hello Friends
Can anyone please tell me how we can create the Default Workbook Template in the NW04s

You can't have an empty workbook as a default workbook template. Your template must have your dataprovider (analysis grid) as a minimum.
You can do this with your own query as well. Build your workbook and make sure your dataprovider name is the same as the SAP default dataprovider name. Then when you open a query, it will replace the query assigned to the dataprovider in your workbook template with the query you are opening in the BEx Analyzer.
Re: Change in Default Workbook Behavior with NW04s
Hope it Helps
Chetan
@CP..

Change default app for excel files

Is there a way to change the default app for viewing Excel files sent as email attachments on iphones and ipads? Currently if you tap the file it opens in Quick Look, tap and hold gives other options to open the file. I want to set the tap affect to open the file in numbers instead.

Any email attachment should give you the option of opening it in any app that can at a minimum view the file. In the File function (i.e. by tapping the "box with an arrow" icon), then swiping to the left and tapping "More", you can turn off a handful of apps from appearing, but also change the order in which they appear on the pop up making your app of choice a little quicker to access. Also, if you tap and hold on the attachment icon in the message, it opens the same functionality with going through the quick look.

REUSE_ALV_GRID_DISPLAY - Save as Excel - Default Extension Issue

Hi Team,
Greetings for the Day !!
I have an issue with saving ALV Grid Output file as XLS. As I click the "Save Local File" Icon and select the Radio button for "Spreadsheet", in the next pop up for file path and file name, the extension ".txt" comes as default in the file name field. Here the expectation is that the default file extension should be ".xls" rather than ".txt". Your inputs are awaited..
Thank you so much..
Best Regards,
Naga Chaitanya

Hello Chaitanya,
Try to download excel with OLE below is for reference
TYPES: ty_line(5000) TYPE c.
DATA: date TYPE sy-datum.
***************&OLE objects for Excel Output&* handles for OLE objects
DATA: h_excel TYPE ole2_object,        " Excel object
        h_mapl TYPE ole2_object,        " list of workbooks
        h_map   TYPE ole2_object,        " workbook
        h_f     TYPE ole2_object,        " font
        column TYPE ole2_object,        " Column
        sheet   TYPE ole2_object,
        row     TYPE ole2_object    .",
CONSTANTS wl_c09(2) TYPE n VALUE 09.
FIELD-SYMBOLS : <f1>,
                  <f2>.
DATA :w_rc           TYPE i,
        w_hex          TYPE x,
        column2        TYPE ole2_object,
        column3        TYPE ole2_object,
        column4        TYPE ole2_object,
        w_deli(1) TYPE c,
        var1 TYPE fieldname, "Delimiter
        lv_qty1(30)    TYPE c,
        lv_qty2(30)    TYPE c,
        lv_qty3(30)    TYPE c.
DATA: it_tab1 TYPE TABLE OF ty_line, " Contains records for first sheet
        wa_tab TYPE ty_line.
* start Excel
CREATE OBJECT h_excel 'EXCEL.APPLICATION'.
PERFORM err_hdl.
SET PROPERTY OF h_excel 'Visible' = 1.
PERFORM err_hdl.
CALL METHOD OF h_excel 'Workbooks' = h_mapl.
PERFORM err_hdl.
* add a new workbook
CALL METHOD OF h_mapl 'Add' = h_map.
PERFORM err_hdl.
CALL METHOD OF h_excel 'Worksheets' = sheet
    EXPORTING #1 = 1.
CALL METHOD OF sheet 'Activate'.       "Activate the sheet.
SET PROPERTY OF sheet 'Name' = 'Sheet1'.
PERFORM err_hdl.
ASSIGN w_deli TO <f1> TYPE 'X'.
w_hex = wl_c09.
<f1> = w_hex.
**************************&For Column Header&*************************
CLEAR wa_tab.
* CLEAR:   wa_field .
LOOP AT it_fieldcatalog INTO wa_fieldcatalog.
    IF sy-tabix = 1.
      wa_tab = wa_fieldcatalog-coltext.
    ELSE.
      CONCATENATE wa_tab wa_fieldcatalog-coltext INTO wa_tab SEPARATED BY w_deli.
    ENDIF.
ENDLOOP.
APPEND wa_tab TO it_tab1.
CLEAR: wa_tab.
   LOOP AT it_output INTO GS_output.   "Loop through the Output Data.
* Move Quantity fields to lv variable for Concatenate.
    CLEAR: lv_qty1, lv_qty2, lv_qty3.
    CLEAR: wa_field.
    LOOP AT it_fieldcatalog INTO wa_fieldcatalog.
      CONCATENATE 'gs_output-' wa_fieldcatalog-fieldname INTO var1.
      ASSIGN (var1) TO <f2>.
*      IF wa_field-fieldname = 'POSID' OR
      IF wa_fieldcatalog-fieldname = 'ANLN1' OR   " posid
        wa_fieldcatalog-fieldname = 'TXT50' OR
        wa_fieldcatalog-fieldname = 'ANBTR' OR
        wa_fieldcatalog-fieldname = 'ANBTR1' OR
        wa_fieldcatalog-fieldname = 'ANBTR2' OR
        wa_fieldcatalog-fieldname = 'LOG'    OR
        wa_fieldcatalog-fieldname = 'STATUS'.
        WRITE: <f2> TO lv_qty1.
        IF sy-tabix = 1.
          wa_tab = lv_qty1.
        ELSE.
          CONCATENATE wa_tab lv_qty1 INTO wa_tab SEPARATED BY w_deli.
        ENDIF.
      ELSE.
        IF sy-tabix = 1.
          wa_tab = <f2>.
        ELSE.
          CONCATENATE wa_tab <f2> INTO wa_tab SEPARATED BY w_deli.
        ENDIF.
      ENDIF.
    ENDLOOP.
    APPEND wa_tab TO it_tab1.
    CLEAR: wa_tab.
ENDLOOP.
CALL METHOD OF h_excel 'Columns' = column2     "Formatting for quantity
   EXPORTING
   #1 = 8.
SET PROPERTY OF column2 'HorizontalAlignment' = '4'.
CALL METHOD OF h_excel 'Columns' = column3    "Formatting for quantity
     EXPORTING
     #1 = 8.
SET PROPERTY OF column3 'HorizontalAlignment' = '4'.
CALL METHOD OF h_excel 'Columns' = column4      "Formatting for quantity
   EXPORTING
   #1 = 8.
SET PROPERTY OF column4 'HorizontalAlignment' = '4'.
   CALL METHOD cl_gui_frontend_services=>clipboard_export
    IMPORTING
      data                 = it_tab1[]
    CHANGING
      rc                   = w_rc
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
* Paste the contents in the clipboard to the worksheet
CALL METHOD OF sheet 'Paste'.
CALL METHOD OF sheet 'Activate'.
* Autofit the columns according to the contents
CALL METHOD OF h_excel 'Columns' = column.
CALL METHOD OF column 'AutoFit'.
GET PROPERTY OF column 'FONT'    = h_f .
*   GET PROPERTY OF column 'FONT'    = h_f .
SET PROPERTY OF h_f    'Name'    = 'Calibri'.    "'Courier New'."Calibrig
SET PROPERTY OF h_f    'Size'    = 11.
*   SET PROPERTY OF h_f   'Alignment' = '2'.
* disconnect from Excel
FREE OBJECT : h_excel, column, sheet.
endform.                    " DISPLAY_EXCEL
*&      Form ERR_HDL
*       text
* --> p1        text
* <-- p2        text
form ERR_HDL .
* * * FORM err_hdl .
IF sy-subrc <> 0.
    WRITE: / 'Error using OLE Automation:', sy-subrc.
    STOP.
ENDIF.
endform.                    " ERR_HDL
Thanks
Sam

Workbook Template

Hi Expert,
We are in development phase for integrated planning.But we face problem on Workbook side.
Because of alot of data and too details , We are using RRI (report-report interface). 1st query contain summary data on higher level, then if you go to details query, it will display details data based on field you have select on summary level and you will be able to input the qty.
For details query, we already create workbook template contain buttons "save" and "cancel". The problem is when we are using RRI, the workbook template is gone. No more button save and cancel.
Please give the advise how to bringour workbook template to sender recipient query. (on summary level, should not have any button, only details should have button)
Thanks in advance.
Siandari

Hi Mehmet,
try this one:
Goto SE38 and create a new report:
Call it Z_SET_BEX_USER_TEMPLATE. Otherwise change the coding.
*& Report Z_SET_BEX_USER_TEMPLATE *
*& Program to update all user's default template *
REPORT Z_SET_BEX_USER_TEMPLATE.
parameter wbid like rsrwbindex-workbookid.
tables: rsrwbtemplate, usr01.
select * from usr01.
rsrwbtemplate-templateuser = usr01-bname.
rsrwbtemplate-workbookid = wbid.
update rsrwbtemplate.
if sy-subrc <> 0. insert rsrwbtemplate. endif.
endselect.
Assign points if useful.
Regards,
Adem
Message was edited by:
Adem Baykal

Workbook Templates

Hello everyone,
I have a question regarding BEx workbook templates. I have to use single template for multiple queries in a workbook. I prepared a template and selected "is based on permanent template" option in BEx workbook. I executed a query and the workbook uses the existing template. When i insert a second query in another worksheet within the same workbook, upon execution the second worksheet does not use the template.
I tried creating a second template, but of no use.
Could someone help me with this.
Thanks in advance.

Hi Sachin,
You could try creating a workbook template with the same formatting on 4 sheets (or as many sheets you are expecting to put queries on).
Hope this helps...

Remove workbook template after migration

Hi @ll,
we have migrated all our workbooks fom 3.5 --> 7.0. In 7.0 we have created a new workbook template. How can I remove the old template from the workbook and replace it with the new one?
Thanks in advance..
Regards,
Flo

Hi Sunil,
As mentioned earlier, the problem is not with refresh. Its with loosing the format after the refresh. As a background, someone from my company had formatted all the 3.1 workbooks using Excel formatting options and they made few settings so that they won't loose the existing custom format. It worked well in 3.1. Now when migrated, the issue has started. When migrated to 7.0. style, the format is there.
It won't let you do anything unless u refresh the workbook with new variable values.
Once refreshed, the custom format disappears.
As a temporary solution, we are migrating the workbooks, copy each worksheet and perform a paste special on new worksheet. Then refresh the workbook(now we see a workbook without the custom formatting). Then copy the format(which was pasted earlier using 'paste special') and paste it on the refreshed workbook.
Then we have used 7.0 setting to keep the custom format.
So my issue is, we just want the format to be unlost even after the refresh(the first refresh) in 7.0.
Regards
Shanthi

How to make a worksheet as Default Worksheet

Hi,
Can anyone guide me how to set a worksheet as Default Worksheet if the workbook containing more than one worksheet.
Eg:I have a Workbook Containing two Worksheets.
first Worksheet used for Before Trigger function which dumps data in
Temp Table and second Worksheet used to retrieve the data from Temp Table.So ,I need to set the first Worksheet as Default Sheet.
Thanks in advance.

Hi,
When you save your workbook, the worksheet that is active becomes the default worksheet.So the next time when you open the workbook, that worksheet becomes active.
Regards,
Yogini

Issue with workbook template

Dear friends,
I would like to create an excel workbook template having two tabs on it. Sheet-1 for result area and Sheet-2 to show navigational attributes and text elements. Is this feasible? If feasible, can anyone of you guide me on it?.
I created a template like this but when we attach a different query (which is not used for formatting)to this template, all data (result area and text elements) shows on the same sheet (sheet 1). I guess, am doing some mistake here while creating the template. If question is not clear, let me know.
Thanks
Viswa

Thanks Elena,
I did the same thing and stored it as template. However, if I use this as template when I run for query, the alignment is not proper. Some columns/rows are exists from the results of template query.
Could you help me?. Do I need to write any Excel macro?.
Thanks
Viswa

How to change default thresholds for some metrics of all targets.

Hi!
We have a lot of servers which have to work hard.
So, our OEM very often generates messages like these:
"EM Alert: Critical:dbsora90.tsb.kz - CPU Utilization is 99.95%, crossed warning (80) or critical (95) threshold."
"EM Alert: Critical:dbsora94.tsb.kz - Disk Device c8t60A9800043346C384C344A4A63516D6Ad0(ssd4) is 99.7% busy."
"EM Alert: Critical:dbsora94.tsb.kz - CPU Load (Run Queue Length averaged over 5 minutes) is 20.78, crossed warning (10) or critical (20) threshold."
I need to change default tresholds for mentioned metrics but I can't their defenition in SYSMAN.MGMT_*-tables or suitable settings in OEM GUI.
And I have no time to edit treshholds manually for each target. )

Modification of Metric Thresholds (as this is what you are referring to), should be done using the Metrics and Policy Settings link (to be found in the Target Home page).
Don't mess around with the SYSMAN tables!
Best thing to do here is to start using Monitoring Templates for this.
Check:
Oracle® Enterprise Manager Concepts
11g Release 11.1.0.1
http://download.oracle.com/docs/cd/E11857_01/em.111/e11982/toc.htm
Regards
Rob
http://oemgc.wordpress.com

How to change default approval for ResourceAuthorizerApproval ?

Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M.

Excel default worksheet for workbook template

Similar Messages

Maybe you are looking for