EXCEL GRAPHS SHOWING DATA FOR SAP

ANYBODY KNOW ANY FUNCTION CALL TO EXCEL GRAPHS SHOWING DATA FOR SAP

Hi,
Please don't use all Caps in Subject and Body Text too
Please have a look at [Forum Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Best Regards,
Faisal

Similar Messages

  • How to archive data for SAP ISU&Billing Systems

    Hi All,
    Can any one tell me the procedure that how do the archiving data for SAP ISU-Billing Systems
    Regards

    Please check this thread you will get some idea about this.
    [Billing for Archiving|http://help.sap.com/saphelp_utilities472/helpdata/en/97/276c359513cf41e10000009b38f839/frameset.htm]
    Regards,
    Siva

  • Validate the data for SAP system

    How do you validate the data for SAP receiver system (RFC or IDOC adapter)?
    It is necessary to recognize does exists reference object or does field has the right value.
    Do you validate it in BPM or you handle  application/technical acnowlegment? Or Messaging monitoring is enough for your requirements.
    In case of ABAP Proxy will it enough to catch Fault Message in order to define what happens?

    Hi,
    there are two different kinds of validations:
    syntactical validation (length and data types of fields etc.) and semantical validations (correct customer in order, allowed number range etc.)
    From a theoretical point of view, only the first kind should be carried out in XI, all semantical validations should be part of the backend inbound processing. And indeed for IDocs and RFCs you will get according error messages in the backend. If you call proxies, you will need to code that yourself.
    In General i'd implement syntactical validations in XI, if more a necessary then XI already carries out (e.g. mandatory fields filled). For data validations i would rely on the backend, meaning for IDocs you should look into using ALEAUD IDoc, which will return any error messages during IDoc inbound processing. For RFCs you can have Exceptions defined which will translate to a negative application ACK.
    Regards
    Christine

  • Problem in Excel after extracting data from SAP Report

    Hello,
    I have a problem with Excel file after extracting it from one of the SAP report.
    When my client extracted data from SAP in to excel he is coming across minus symbol on both sides of the number.
    for ex:        -447492177-
    When i extracted same SAP report in to excel i didnt face any such problem.
    Please share your inputs on what could be the problem.

    1. Make sure your client and you are using the same version of Microsoft Excel
    2. Let your client try to OPEN the exported xls file from a existed workbook instead of double-clicking the file directly.
    Atom

  • Issue with Excel Web Access --Excel graph showing only gray color

    I am using "Excel Web Access" Web Parts to show the excel graphs in my MOSS2007 setup. I have multiple team sites under one site-collection. Excel web access is fine for all the team sites but , its showing only gray color for just one site. I tried to upload
    new excel sheet with different graphs but still it shows the same gray color.
    Any help would be really appreciated. 
    Umesh Mishra | My blogs: http://windowsadminblog.blogspot.com | Twitter @UmeshMishra | Linkedin: /in/umeshmishra

    I was able to resolve the issue , here is the solution: http://windowsadminblog.blogspot.in/2012/12/excel-web-access-graphs-showing-gray.html
    Umesh Mishra | My blogs: http://windowsadminblog.blogspot.com | Twitter @UmeshMishra | Linkedin: /in/umeshmishra

  • Report to show data for specific MD

    Hello,
    I am racking my brain thinking of a way to do this...
    I have some specific masterdata for example Product 1,2,3...10 and i also have a cube where any Actual & target sales are recorded
    I need a way of producing a report whereby the report shows ALL products and any data relevant from the cube...
    ie  if there is a product where there is no data for actuals or targets then the report will still show a line but with blanks in the KF.
    (right now, if there are no actuals or targets, that product is ommited from the report, I need to be able to see that product and the fact that there is no data for it in the cube)
    any ideas?
    thanks
    BW_ER

    Hi,
    There are multiple ways of achieving what you want.
    1) You can do as proposed and create an infoset and then you can use and outer join on the master data. This way all master data records are displayed independently of whether they have any transactions in the infocube when you create a query
    2) You can create a multiprovider on your master data and your infocube and then in the mapping of the fields, specify that you want the e.g. 0MATERIAL to come from  your master data
    Hth,
    Jacob

  • How to only show data for a certain period of time for cumulative data?

    I need to show cumulative data for the past 12 months on a chart (e.g. # of accounts). But in order to get the cumulative data for Month 1, I need to cum the data starting from the very first month when we started to add new account which can be Jan 2006. If I put a filter to limit the data to only last 12 months, then my Month 1's cum data will not include any account prior to Month 1. So how do I do this?
    Edited by: user637947 on Feb 5, 2009 2:02 PM

    Hi,
    Try this Filter....
    Opportunity."Close Date" >= TIMESTAMPADD(SQL_TSI_MONTH, -11, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE) - 1), CURRENT_DATE)) AND Opportunity."Close Date" <= TIMESTAMPADD(SQL_TSI_MONTH, 1, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE) + 0), CURRENT_DATE))
    Thanks and Regards,
    Amit Koul

  • Analyzer for Excel not show data.

    Hi at all.
    I have one select in BI publisher and when I push the button Analyzer for Excel, appear a message box. This message advise me for enable the macros of excel.
    I accept this message but when the excel file's opens it appear empty.
    What´s happend with my BI buplisher? is problem of Excel?
    thanks.

    fschulze,
    I face the same issue in Excel 2003: Run-time error 91, Object variable or With block variable not set.
    This happens everytime when I try to refresh the data after I open a saved excel template. But the refresh works fine when the report is initially downloaded using the Analyzer for Excel button
    Have you found the workaround for this problem ?
    Thanks.

  • How do I get Thunderbird to show Date for email intead of just Time?

    New Mail only shows Time. Seems to have started with change to 2015

    By default Thunderbird only shows the time for today's messages. It takes for granted that you know what day it is. The date is appended at midnight.
    Is this what you are seeing?

  • SSIS 2012: Integration Services Catalog not showing data for most recent executions

    Techies--
    Under a previous deployment of an SSIS package, I was able to go to the Integration Services Catalog, look under the  folder-->project--> package  then right click and request a standard report for all executions. The report would display
    the execution details.
    Today a colleague recently deployed a newer version of the same package to a test server... which is failing from a job set up via sql agent.  I went to look at the root cause by going to the Integration Services Catalog to review the report. No execution
    data appears.  I looked at the filter--compared it to the filter I have set on the production copy of the stable version. The folder name, package name and project name match. Both have a status of 'All'. The date range is the same (2/19 - 2/25). 
    In fact, I went back to the test deployment and changed the date range to the date of the last failure (1/30).  Now I see data only from 1/30 but none for today's execution.
    Something must have happened in the deployment process--but what? How do I debug this issue with the reports--but even more importantly,  how do I get to the raw execution data to see what the story is on the failed execution itself?

    @Arthur, thanks for responding. In a nutshell, I searched through the ssisdb.catalog.event_messages table to determine roughly the same thing you determined--an execution for that package (or for that matter, any misnamed package) with today's timestamp
    simply never occurred--even though the job agent log appeared to indicate it had.
    I re-deployed the package ... forced an execution with an interactive run from the catalog... and viola! The execution info appeared through the standard reports as expected.
    Any idea where I could/should look for a wayward deployment? (BTW, the report for validations showed no data either on that first deployment).

  • Test data for SAP CRM 7 ( Activites )

    Hi
    my first question belongs to the datatables in SAP CRM 7. I would like know which table is important for "Activities".
    I see that many tables are empty, is there a transaction code or function to generate testdata?!
    greetings hassan

    Hassan,
    If you have a CRM functional/development expert on site, please have them walk you through basics of using SAP CRM and how to generate data.  It is not the intent of the forums to train you on how to use CRM.
    For your database question your developer resource would have told you an activity is what is called a "business transaction" and the primary header table is CRMD_ORDERADM_H.
    I strongly suggest you review some of the materials outlined in my blog before posting any further CRM related questions, or at least searching in the CRM General & Framework forum for general CRM questions that are not release specific.
    /people/stephen.johannes/blog/2009/05/12/how-to-answer-what-is-a-bdoc
    I'm locking this thread due to the fact it will become an attraction for "hunters".
    Thank you,
    Stephen

  • MB51 showing data for just one Posting date

    Hi All,
    MB51 is showing material docs for just one posting date while we searched for whole one year from 01/01/2008 to 12/01/2008.
    Please tell what should i do ASAP.
    Thanks
    Madhur

    HI,
    MB51 is showing material docs for just one posting date while we searched for whole one year from 01/01/2008 to 12/01/2008.
    year from 01/01/2008 to 12/01/2008 i Think this is MM.DD.YYYY format,
    Ok can you clear your MIGO posting date fromat i.e MM.DD.YYYY or DD.MM.YYYY,check it at your end
    or try this give only plant and movement type 101 and execute report
    Regards
    Kailas Ugale

  • Fieldes planned delivery date and actual good recipt date for SAP QUERY

    Hi Gurus
    I am changing sap query. I need to find two fieldes  : planned delivery date and actual goods recipt date
    I dont know MM tables, do you know wrhere are?
    in table EKPO i don't find the fieldes.
    Thanks in advance

    Thank a lot!
    Regards

  • Showing data for the first row only

    Oracle Experts ,
    Below is my table in oracle.I wnat show Company ID only for the first row of each company. Table 2 is my output .
    Company Country Company ID
    BARCALAYS UK 1
    BARCALAYS USA 1
    BARCALAYS Australia 1
    Kingfisher UK 2
    Kingfisher INDIA 2
    Kingfisher INDIA 2
    Output Table 2 :
    Company Country Company ID
    BARCALAYS UK 1
    BARCALAYS USA Null
    BARCALAYS Australia Null
    Kingfisher UK 2
    Kingfisher INDIA Null
    Kingfisher INDIA Null
    Please give me a sql query.
    Many thanks in advance .
    Regards,
    Dirasa

    based on if a particular country is appearing twice for the same company and company_id wether to show the company_id for that country or not you may use any of the below queries :)
    /* Will show compan_ID twice if the country is repeated */
      with x as (
          select 'Foo' company_name, 'UK' country, 1 company_id from dual
          union all
          select 'Foo', 'USA', 1 from dual
          union ALL
           select 'Foo', 'USA', 1 from dual
           UNION ALL
          select 'Foo', 'AUS', 1 from dual
          union ALL
        select 'Foo', 'AUS', 1 from dual
          union all     
          select 'Bar', 'UK', 2 from dual
          union all
         select 'Bar', 'USA', 2 from dual
         union all
         select 'Bar', 'India', 2 from dual
    SELECT company_name,country,CASE WHEN rn=1 THEN company_id ELSE NULL END company_id
       FROM (SELECT
       company_name,company_id,country,rank()over(PARTITION BY company_name,company_id ORDER BY country) rn
        FROM x)
    /* Will NOT show compan_ID twice even if the country is repeated */   
      with x as (
          select 'Foo' company_name, 'UK' country, 1 company_id from dual
          union all
          select 'Foo', 'USA', 1 from dual
          union all
          select 'Foo', 'AUS', 1 from dual
          union ALL
        select 'Foo', 'AUS', 1 from dual
          union all     
                 select 'Foo', 'USA', 1 from dual
           UNION ALL
          select 'Bar', 'UK', 2 from dual
          union all
         select 'Bar', 'USA', 2 from dual
         union all
         select 'Bar', 'India', 2 from dual
    SELECT company_name,country,CASE WHEN rn=1 THEN company_id ELSE NULL END company_id
       FROM (SELECT
       company_name,company_id,country,row_number()over(PARTITION BY company_name,company_id ORDER BY country) rn
        FROM x)
    /* Will show compan_ID twice if the country is repeated */
      with x as (
          select 'Foo' company_name, 'UK' country, 1 company_id from dual
          union all
          select 'Foo', 'USA', 1 from dual
          union ALL
           select 'Foo', 'USA', 1 from dual
           UNION ALL     
          select 'Foo', 'AUS', 1 from dual
          union ALL
        select 'Foo', 'AUS', 1 from dual
          union all     
          select 'Bar', 'UK', 2 from dual
          union all
         select 'Bar', 'USA', 2 from dual
         union all
         select 'Bar', 'India', 2 from dual
    SELECT company_name,country,CASE WHEN rn=1 THEN company_id ELSE NULL END company_id
       FROM (SELECT
       company_name,company_id,country,dense_rank()over(PARTITION BY company_name,company_id ORDER BY country) rn
        FROM x)
                    Cheers!!!
    Bhushan

  • Upload Demand Data adds up to the old data for SAP SPP

    While uploading demand data using csv files, it adds the demand values again if uploaded for same part- same time- location again.
    Do we an option in the data upload process, where in we can configure it so that it overwrites the old data and add the new data.

    Hi Bhargav ,
    When you are repetitively load the same data, there exists the requests in  request tab page of Manage Data Targets which  are active and again you are loading the same data with different request ,hence it gets added ,
    If you don't want then you need to delete this old request and then load the data or in InfoPackage in Update Tab page you can select the delta update or full update option .
    Regards ,
    Digambar

Maybe you are looking for