Excel Layouts Header formatting

Does anyone know why format changes to the header of excel bps layouts
in config do not work?

Charles,
      There is clear workaround for this.You can do this: lets say your header is in
      Row 3 / cells D3,E3 and F3. You can copy these into Row 4/ cells D4,E4 and
      F4 (basically into the next row) and hide Row 3.
      Now you can format Row 4/ cells D4, E4,F4  and display them the way you
      would like.This is seamless to the user.SAP doesn't
      allow overwriting the predefined cells for header
      and data columns.
      Hope this helps.
  Cheers
  Srini

Similar Messages

  • Excel Header Format using GUI_DOWNLOAD

    Hi Experts,
    I need to download the excel file with the below shown header format.
    I can able to download as excel using GUI_DOWNLOAD. But I don't know how to bring the first row of the above pasted image.
    Please advice any way to download the file with the above header format.
    Thanks,
    Srini

    Here is some sample code of someone who has done this... i know lazy of me just to paste a link but I think it is the code that will fit your requirement.
    http://scn.sap.com/message/6048823#6048823

  • Column Heading in Excel layout coming to Second Line

    Hi All,
    I am doing an excel Layout using Report Builder 6i. There in excel layout output,
    the cloumn headings are coming in two lines. I mean headings for few last columns are getting wrapped to second line, though corresponding data is coming
    correctly.
    Please help me over this if anyone had faced the same problem...
    Thanks in Advance

    You need to make sure that your column headings in Reports have no 'returns' in them. The text should be all on one line and the text in the layout editor should be no 'taller' than 1 line. Your frame around the column headings should also be no 'taller' than 1 line.
    Hope this helps!!

  • Getting Runtiime error while exporting to Excel 97-2000 format (URGENT)

    Post Author: net_us2001
    CA Forum: Exporting
    Hello Everyone,
    This is my first time in this forum.
    I am getting runtime error while exporting the report in EXCEL 97-2000, but exporting perfactly in MS-EXCEL (Data only) format.
    I found the reason is, using expression (formula) for formatting phone number as shown below.
    On table field "abPhone",
       used  "formula = PhoneFormat() " expression on format field -> common tab -> display string .
    Intead that i have used fumula e.g. test1 and used same expression, then it was exporting perfactly..
    Having above problem if i use expression to supress group header and report header. 
    So let me know if anyone can help, why it was giving error in first case.
    Thanks in advance
    Thanks,
    Nitin

    Hi,
    This is the Technical limitation of ABAP list export to local file.
    ALV grid greater than 1023 characters per line will be split into 2 lines.
    To prevent a line break occuring when you download the list as a local spreadsheet file, you must reduce the width of the list in ALV. You can do this either by hiding columns or by changing the column widths in the ALV. Take care that the column heading characters also dont exceed 1023 characters. This will work.
    Thanks
    LG

  • Download functionality in EXCEL and PDF format to the  Webdynpro iView

    Hi Expert,
                      I am using NW 7.0 ehp1 sp3. I developed some Webdynpro RFC model application for the product catalog of the material related data.
    Now my requirement is to provide the download functionality in EXCEL and PDF format to all of these Webdynpro (java) iView.
    How we can achieve this requirement? In which part of the webdynpro application we have to write the code?
    Someone can help me very clearly in steps to achieve this?
    Thanks,
    Kundan

    Hi,
    I don't think it is possible to redirect the html stream of the Web Dynpro iView to a PDF / Excel document, since it essentially would mean you have to call the Web Dynpro application again, maintaining the state and context of the iview itself
    However, using (for instance) the JExcelApi (Excel) or iText (PDF) you could create documents using the data displayed in your Web Dynpro iView, which has the added benefit you could design and layout your PDF / Excel documents in a more suitable layout for printing (most WD applications look horrible when printed)
    Cheers,
    Robin

  • Analyzer - Table header formatting

    Hi @ll,
    I`ve formatted a BEx Analyzer workbook to our requirements. The only thing I can`t change is the table header.. Could anybody tell me how to change the table header formatting?
    Regards,
    Flo

    Hi,
    Open your workbook. Go to design mode, select the design item in the header and delete the design item.
    Again click on design mode to come back to original workbook and click on header and delete the header bar and give the table header as per your requirement.
    To format the table header, right click on header and use excel foramatting(Font size, font & font style).
    Hope it is helpful.
    Thanks,
    Ashok

  • Excel-layout to Smartforms

    Dear development team,
    I have a requirement to the smartforms with a lot of information (such as article data, info record data, vendor, etc.). For this there is a template in Excel format.
    To reduce the effort to design the smartforms Iu2019m looking for an approach to import the excel layout to the smartformsu2019 table structure.
    Is there any possibility to import the excel-format (the format is fully reassessed) to the smartforms?
    Thanks for your hint.
    Best regards,
    Kurt.

    Or you can start from scratch using ABAP OLE for Excel or generate XML Excel.
    You can understand what to do from these blogs:
    /people/otto.gold/blog/2010/02/11/happy-reporting-with-excel-ii
    /people/otto.gold/blog/2010/02/09/happy-reporting-with-abap-ole-excel
    regards, Otto

  • Upload data from excel( XLS/xs format) in SAP CRM

    Upload data from excel( XLS/xs format) in SAP CRM  7.0 as there is no *ALSM*EXCEL*ITAB* like FM there unlike ECC 6.0...?

    hello Buddy,
    plz go through below links
    http://wiki.scn.sap.com/wiki/display/CRM/CRM+Web+UI+-+Uploading+data+from+Excel+files
    http://scn.sap.com/docs/DOC-50732
    http://scn.sap.com/docs/DOC-31985
    Hope This will Help You...

  • How to export data from MS Project 2010 to MS Excel 2010 with formatting

    I have created a Project 2010 export map to Excel 2010.  It works fine.  I have two questions that I cannot determine an answer.  I'm not sure if its a project or excel setting.  I have spend hours trying to make it
    work with little success.
    1.  When the task name field is exported to excel it losses summary/task indent.  Is there a way to set it up so it works via the export map?
    2.  The Start & Finish fields in project is setup as 5/26/11 when they exports to excel it shows up as 5/26/11 8:00 AM.  Is there a way to set it up either in project export map or excel so its formated as a date field. 
    Excel's Format Cell function does not seem to work converting them back to just 5/26/11.
    How can I keep the outlines and formatting in my data while exporting it to Excel.
    I would appreciate any guidance.
    Yogesh

    Rameshchandra --
    Two things I would recommend:
    Do not add your question at the end of a post that is marked as Answered.  In the future, please post your question as a new question so that everyone will notice it and be able to answer it.
    Because this is a programming question, please repost your question as a new post in the Project Customization and Programming user forum at:
    http://social.technet.microsoft.com/Forums/projectserver/en-US/home?forum=project2010custprog&filter=alltypes&sort=lastpostdesc
    Hope this helps.
    Dale A. Howard [MVP]

  • Export to PDF, Excel, Excel (Data Only) formatting issues

    Hi Community
    I have a report that consists of 5 subreports. Out of the 5 subreports, 3 of them have a similar format whereas the other 2 are different.
    Iu2019m currently facing an issue whereby the exports to excel works fine, but excel (data only) has some alignment issues(i.e. the data appears below the correct columns). However, when the report is tweaked to make export to excel (data only) appear correctly, the export to excel had its data shifted out of alignment. There is no impact to pdf exporting at the moment.
    Are there any people who are facing similar issues? Is there any resolution or workaround? I appreciate any help. Thanks.
    FYI, the version of crystal reports is Crystal reports is Crystal reports 2008 and we are using the crystal report viewer interface to export into excel and pdf formats. The excel version is 2007.
    Regards

    DW, i've also run into issues with multiple sub reports. I resolved it by putting each sub report into it's own section, and then suppressing the sub report (Note, if ur trying to export subreport data to excel, I don't think its going to work. You'd need to create shared variables and then bring those sub report shared variables into your main report).
    Once you bring your shared variables into the main report, suppress your sub reports, and then export to excel, you're still left with a dataset that has missing rows. This is ok. You can solve it easily within the excel file itself by sorting the data on a unique ID like Account #. This removes the extra rows.
    Not the most elegant solution, but it works.

  • Need help with Report Generation Toolkit: Excel Set Cell Format.vi

    Hi people,
    I've been searching and found this old thread of someone asking what is the input parameter "Number format". And I dont know what should I put in there. I've tried so many possibilities, but nothing works so far, such as:
    0,0
    0,?
    0,#
    #,0
    ?,0
    and also with @, doesnt works. Where would I find help about this parameter?
    I'm using Excel2003, german version, thus local decimal separator is a comma.
    I also found this help from NI, but seems doesnt help me either. Do I miss something important?
    thanks,
    Yan. 

    Hi,
    I've used your suggestion and some numbers in excel doesnt need to get "right click, change to numbers" anymore (green indicators on the left-top side in some cells are gone). But, I think its still not a number, because I cant use a simple formula, such as in cell A10 I type "= A1/2" (cell A10 equals cell A1 divided with 2) . I got error which says its not a number.
    Well, but other thing is found, any format-string I put in the input of Excel Set Cell Format.vi, such as #,########, will be shown the same as "customize #,########" if I right click in a cell in excel and click "Zellen formatieren" (formatting cell). But however, the numbers are still depends on the input of the format I put in the Append Table to Report.vi.
    regards,
    Yan.

  • LE7:Score Layout:Global Format:Maximum Bars per Line - Line Break Bug!

    Hello
    This problem occurs in Logic Express version 7.
    (I am using MacOS version 10.4.2 on an eMac)
    I am currently compiling and editing a large score for a big band composition consisting of 22 parts:
    Flute 1
    Flute 2
    Clarinet 1
    Clarinet 2
    Alto Sax 1
    Alto Sax 2
    Tenor Sax 1
    Tenor Sax 2
    Baritone Sax
    Trombone 1
    Trombone 2
    Trombone 3
    Trombone 4
    Trumpet 1
    Trumpet 2
    Trumpet 3
    Trumpet 4
    Guitar
    Keyboard
    Electric Bass
    Percussion 1 (Kit)
    Percussion 2 (Aux)
    I am creating the score in a separate file, and I am combining parts into 1 stave each by instrument like this:
    Flute 1 & 2
    Clarinet 1 & 2
    Alto Sax 1 & 2
    Tenor Sax 1 & 2
    Baritone Sax
    Trombone 1 - 4
    Trumpet 1 - 4
    Guitar
    Keyboard (2 staves)
    Bass
    Percussion
    Each instrument, with the exception of keyboard which has 2 staves, consists of one stave, making up systems of twelve staves each. By sizing down each score style to 2,
    I have managed to fit 2 systems onto each page, therefore significantly reducing the amount of paper needed.
    The problem comes when organising the layout of my score,
    in particular, the line breaks. Using layout:global format, I have limited the maximum number of bars per line to 8, both in the page edit and normal score mode.
    I am trying to divide up my score so that there are 8 bars per system. Using the white arrow tool, I am dragging bars up and down in order to achieve this.
    However, when I get 30 odd bars in, I discover a system with 12 bars crammed into it - and even printing it off, it is clear that the system could benefit with less bars; the notation is squashed up together and not very easy to read.
    THIS IS THE ACTUAL PROBLEM:
    So I tried using the white arrow to move the last 4 bars down onto the next system, and a bug occurs where I end up with about 20 bars on the system, oddly distorted, the first few bars of which are squashed up together at the beginning of the line, and the last bar of which is stretched far off the right hand side of the page out of view. Then the next 20 or so bars are no where to be seen (probably far off the right hand side of the page) before the system below.
    If you dont know what I am talking about, I could provide a screenshot if you request.
    I have tried everything to get 8 bars on that particular system; dragging the stretched bar downwards, dragging squashed bars downward, moving bars down 1 by 1, moving bars onto the system above, moving bars away from the system below (to make room for the 4 bars that I want to move from above), adding more bars and dragging them down, but none of these methods have worked. I am either stuck with 12 bars crammed onto one system and 4 bars on the next or an oddly distorted version of the system which cannot possibly be read. Even when I settle with the unsatistactory former, I encounter further problems on subsequent systems below, some systems of which are already distorted.
    All I want is to have 8 bars per system, it should not be too much to ask! The layout:global format:maximum-bars-per-line calculation seems to be redundant, even when I reset the default line breaks - it just does not automatically set 8 bars per line, which it should do. Is there not an option to determine bars individually by number onto their respective lines, without having to use the white arrow graphic layout tool?
    The problem is extremely frustrating, and it is preventing me from completing, presenting and handing in a score for my university music composition.
    I have no other score producing software, and starting it
    from scratch on paper is going to take me weeks, because it consists of 830 12/8 bars in 22 parts, and I need to get it ready by next term!
    Any help would be extremely helpful and much appreciated, especially a patch or a useful way round. It could be related to memory, or hard drive space, as I have experienced similar problems in the past, where my score has been stretched off the page during a time when I have had little disk space...and this is a very large piece of music which might stretch the score capabilities of Logic.
    If so, has anyone got any suggestions?
    Thanks!
    Rory
    eMac   Mac OS X (10.4.2)  
    eMac   Mac OS X (10.4.2)  

    nope just cutting should work.
    here are some things to try:
    1. try assigning a different score style. for the regions. duplicate and then adjust the default ones if necessary.
    2. try creating a new instrument set. in fact delete them and make a new one (use the key command: create instrument set from selected)
    3. it may be a formatting problem so check:
    in global layout constant spacing (try 8 or 9) and proportional spacing (try 45 or so). then try factory defaults.
    4. try copying and pasting the midi into a brand new region and looking at the score for that.
    5. try fiddling with the layout tool drqagging bars up or down.
    normally simply cutting the region of just one object is enough to force a redraw. maybe try it on all of the regions. what happens when you double click on a region?

  • How can I change excel column header using Labile.

    Dear Experts,
                          How can i change excel column header using LabVIEW.
    Thanks for any and all help!
    M.S.Sivaraj.
    Sivaraj M.S
    CLD

    As I said in my previous post, column headers in Excel are merely row 1 cells. May be I missing something here, so please be more explicit with your question.
    I guess you are using the Excel Report tools, and you want to modify an existing sheet. From my limited experience with the Excel Report tools, it is not possible to open an existing woorkbook (except as template...), so the answer to your question should be "Forget it"...
    The work around is to use the example I pointed for you before, and either to write the whole new colum headers as a string array, starting in A1, or to write a single string to a given cell in row 1.
    Hope this helps 
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • How can I embed files of word, excel, and pdf format in a pdf document

    I have a word document of the product, which I am updating for next product release. However, there are some excel, word, and pdf files embedded within a word document. When I double click these embedded files in word, these files open in a new window. However, we deliver documentation to the customer in the pdf format. Therefore, when I am converting the word document in the pdf format, only an icon of the embedded file is displayed and the files do not open in a new window. Can someone let me know how can I embed these files (in word, excel, and pdf format) in a pdf document?

    You must attach them to the PDF file after it is created. You cannot embed file attachments onto a page as you can with Word.

  • Error displaying data in Excel Layout of ALV

    Hi,
    I am trying to display ALV data in a Excel layout. After changing the layout i am not able to view the data, rather the excel template is alone displayed.
    Is there setting that i am supposed. I did not try this on a  custom report but i used SE16 to display data.
    Any help will be really appreciated!!!
    Thanks in advance,
    Kathirvel

    Hi,
    Please make sure that you have made a <b>global</b>
    <b>declaration</b> for the ALV Grid control.If not try
    with this
    Please reward points if this explanation is useful.
    Regards,
    Siva

Maybe you are looking for