Excel not respondin when I send data

Hi All,
I have created an Input chedule and when I try to send data, excel is not reponding.
Could any one help me why this happens?

Is the measure on YTD while sending to a periodic application or set to Periodic in a YTD application? This caused some trouble for me in the past when it was set wrong by accident.
-Joost

Similar Messages

Why do text messages from my iPad appear to some people as if they came from my email address instead of my phone number? This does not happen when I send text messages from my iPhone.

Why do text messages from my iPad appear to some people as if they came from my email address instead of my phone number? This does not happen when I send text messages from my iPhone.

You need to link your iPhone number to Messages - and Facetime if you use it. For Messages go to Settings>Messages>Send and Receive at>You can be reached by iMessage at. If your phone number is showing there, select it as your Contact address. If it doesn't appear in there, take a look at the end of this article for help.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support

Why do the titles under my photos not go when I send them to a flash drive?

Why do the titles under my photos in iphoto not go with the pictures when I send them to a flash drive? Is it not supposed to ot am I doing something wrong? It does it just fine with windows: I am new with Apple.

If you want the title to be the new file name export with the option to use the title as the new file name see highlight to far left:
If you want the title to be inluded with the file so another photo application can read that title like iPhoto would use the option to include Title and Keywords. But this method will require an applicaiton that can read the iPTC fields that will contain the title.
OT

JDBC Driver not found when connecting to Data Federator XI 3.0 SP3

Hello,
I am trying to connect Crystal 2008 to Data Federator however I am getting the Error
Failed to open connection.
Details: JDBC Driver not found.
The JDBC Drivers are installed and working for the Universe Designer, however I am unable to get it working for Crystal. I am using the following connection parameters on Crystal:
Connection URL: jdbc:datafederator://<<servername>>:3055/<<catalog>>
Database Classname: com.businessobjects.datafederator.jdbc.DataFederatorDriver
Any Advice on what I may have missed?

The issue was solved, thanks to Patric Wan:
u201CFailed to open the connection. Details: JDBC driver not found.u201D
This means Data Federator JDBC driver was not added to:
C:\Program Files\Business Objects\common\<version>\java\CRConfig.xml
How to connect the Data Federator Server using JDBC?
1. Retrieve the following files from the machine where Data Federator is installed, from the directory [data-federator-installation-dir]/JdbcDriver/lib.
    - thindriver.jar
    - avalon-framework-4.1.5.jar
    - jacorb.jar
    - log4j-1.2.8.jar
    - logkit-1.2.jar
2. Copy these files to a directory of your choice ([your-jdbc-driverdirectory]).
3. Add [your-jdbc-driver-directory]/thindriver.jar to CRConfig.xml   <Add to Classpath tag, you can refer to original sample.CRConfig.xml should be at: C:\Program Files\Business Objects\Common\4.0\java\CRConfig.xml, or search your BOBJ products install to find this file>
4. URL: jdbc:leselect://<host>[:<port>][/[<catalog>]][[;param-name=value]*]
Class Name : LeSelect.ThinDriver.ThinDriver
Edited by: Craig Sander on Feb 12, 2011 8:22 PM

Why does a track not pan when you send it to Itunes?

I'm trying to pan two differnt tracks directly to the left and directly to the right.
but when I send it to I tunes both tracks end up evenly to the center. how do I fix this?
-gootse

That shouldn't happen. Do you have the "sound enhancement" checked in iTunes? That does strange things to files sometimes.

Hyperlinks in Excel not working when doing the PDF Convert

I have worked on this and worked on this. Now I am at a point where I need assistance as I am stumped. I have about 20 different facilities that have financial statements that need to be published in Adobe as a PDF format and when I go through the steps to convert everything looks good, except the links are not working. We have about 62-74 pages that will be exported and due to the departments and such we need the links to work.
This is through Excel-
I select the worksheets I want to convert then after it is done I open the PDF and the links are not working. To set them up manually in Adobe is too labor intensive -- any ideas on how to get this to work?
Thanks in advance for any assistance you can provide me.

I am on the X version.
I am using the PDFMaker
Using either 2003 or 2010 Excel version
Click on making bookmarks and links
I can send an attachment, please beware that is it financial information that cannot be published-also the hyperlinks are setup in Excel as well.
Not sure how to upload the worksheet and would prefer to send via email if at all possible.
ANY HELP is GREATLY Appreciated :-)
Thank you and have a great day!

Acrobat PRO XI not responding when using Send File

We have 3 new Windows 7 Pro 64 bit workstations with latest service packs, Office 2013 latest service packs and Adobe Acrobat XI ver 11.0.4.
I have assigned the AD group Domain Users to the local pc Administrators group.
when trying to use the send file as an email attachment, the email is sent with the attachment but Acrobat goes to "not responding" state
When I login as me Domain Admin, works fine. When I login to my pc as one of these users works fine.
What am i missing?

I have the same issue, everything I do seems to only fix it temporarily. I can't believe we pay over $100 for a piece of software and the only support option is their forums, I can't call or even chat with a support rep, that is insane.
I have clients that this same issue is happening to and telling them it's fixed every other day only to have it break again and have no where to look for answers is extremely frustrating. Please help us out.

Exit button not working when entering wrong date

how do I get the message not to appear by day Invalid (Frm-50004) in forms

dear Shrikant,
i have one item start_date whose data type is Date and format mask is DD/MM/RRRR ,
when i m entering worng date it is showing below message which i kept on ON-ERROR trigger of start_date item with an error code 50004 ;
"FRM-50004: Day must be between 1 and last of month."
as i m entering wrong date i want to exit my form but my exit button is not working properly.
The message appears several times, about 3 or 4 times, because the focus is on the text item to the date, and is firing the trigger ON-ERROR, debugging the code, you notice that after the message back running the line "IF", because the error frm-50004 can not be erased, is giving this error all the time because the focus is on her text item!
i have kept my push buttons mouse and keyboard navigation property to "NO".
then also it is not working tell me if any solution is there.

FMLA standard hours infotype 2001 not editable when working with date range

Hi All,
The issue described below arises at the Juncture between FMLA Workbench and Absence Infotype IT2001.
When we try to tie a FMLA Request to Absences the process takes us to the Infotype PA2001 screen wherein we would like the Absence Hours Field to be Editable so that we could enter Hours (less than full day).
The process works fine when the FMLA absence is for a single day, i.e. if an employee availed a FMLA leave on a day (whether full day or part of a day) the Absence Hours field (PA2001-STDAZ) is editable and the user can enter any number of hours of his choice.
But the process faces a glitch when the FMLA absence spans over a period of time (i.e. an employee availed a FMLA leave for over a period wherein each day may or may not be a full day absence, in this scenario it would be best if the system allow the user to enter Absence Hours so that the User could enter the exact number of Absence hours correctly. But unfortunately, when an absence spans multiple days the Infotype 2001 screen dynamically turns the Absence Hours field (PA2001-STDAZ) uneditable (grayed out) and the system forcefully enters hours equal to the sum of the work schedule hours for each working day covered in the span of period for which we are trying to enter FMLA Absence Hours.
I have used the USER EXIT and the BADI route and tried to change the Screen Table to editable, but with no luck.
Wondering, if anyone of you could help me out of this glitch.
Thanks in Advance.

Hi,
   I don't think this is possible.
   You cannot make the Hours field editable for a date range.
   I don't think its feasible to enter absence hours on a day basis given a date range.
   Better think of creating a custom infotype to enter absence hours .
   (Design would be : based on the date range entered , say 01.01.2011 to 05.01.2011 , you should get five input enabled
     boxes(dynamically) for five days to enter the absence hours , this is not possible in standard infotype ..... )
Regards,
Srini.

Filters on CSWP not working when Scheduling Start Date sets Immediate Value

In Sharepoint 2013, When users sets value of "Scheduling start date" to "Immediately", the filters does not work correctly.
I have checked many forums where it is mentioned that If you set scheduling Start date to Immediately, internally the Scheduling Start Date is set to 01/01/1900.
When i use query in content search webpart as publishing date is between "Scheduling Start Date" and "Scheduling End Date" so it fails. it does not displays filtered data.
Please provide some resolution for this issue.
I have tried using calculated field wherein we can put formula to get value for Immediate value and then use it in Filter expression. but I need another approach related to "Scheduling Start Date" Column. i.e can we remove the Immediate radio button
or can we restrict user to use specific date only?
Thanks in Advance.

This is a new one on me.
It's a server program to interface with QuickTime and some other problematic services.
If you use video or 3D in Photoshop Extended, you probably need it.
Sounds like you are correct in that it has to do wtih Quicktime. Do you have PS extended?

Date Picker Alingment is not proper when we open Date in new Tab

We are facing Date Picker Alignment issue with Safari 5 browser on MAC 10.7.3. Our application is developed in Seam framwork ( which includs JSF and EJB). The issue which we are observing as follows-
There are some links on our application JSF page which opens Date in new window. But when we enable option for opening in tab always and click on Date link, Alingment of new tab opened is not proper.
Please suggest the possible action or pointers to work on this issue.
Images
Date Opened in new Window:
Date Opened in new Tab, Alingment is not proper:
Thanks in advance

Here is more info to describe the issue.
These are the movies sent to the Apple Engineers to show how our
workflow has worked for 7 years until Safari 4 came out.
Again this has caused us to go back to 10.5.8 though we enjoyed some of Snow Leopards improvements.
Have your sound on when listening to safari4 so you can hear the overlaps.
http://jenniradio.com/movies/safari3.m4v
http://jenniradio.com/movies/safari4.m4v
Would really like this fixed.
Ian

Patch Policies not applying when set to Date Specific

I have been trying to use patch policies for a while but can't seem to get
them working very well. In 'Patch Policy Enforcement Settings' I have set
a schedule using 'Date Specific' and 'Process immediately'. If I check the
patch status policy I see 100 targeted/ 12 Effective/ 0 Not Effective/ 88
Pending. The 88 never move from pending even though almost all of them need
the required patches. If I set the schedule to Recurring and 'When a device
is refreshed' it basically tries to install the patches on every refresh
cycle even though the device no longer requires the patches. This happens
on every device targeted by the policy.
Digging into the actually bundle that gets created I can see in the install
actions the Install Frequency is set to 'Install always' which may explain
why it runs through each patch every refresh when it is set to install on
refresh.
The documentation on this new feature doesn't go into much detail on how
everything actually works. I would guess the correct functionality would be
once a policy is enforced on a machine it would no longer try to keep
installing the same patches from the policy since they are not needed.
Using the Enforcement by 'Date Specific' seems to be broke also.
Jim Koerner
Server - ZCM 11.3.1FTF1 and Internal Database on Win2008R2x64
Clients - ZCM 11.3.1FTF1 on Win7SP1x64

Originally Posted by Jim Koerner
Sounds just like it. Missed when I was browsing the knowledge base. doing
some more detailed searching I fount this in readme for 11.3.1 "Defects
addressed 848442 Process immediately if device unable to execute on
schedule" option doesn't work of Patch Policy Enforcement Settings. In my
case this is not fixed and I am at 11.3.1FTF1
I will have to put in a SR and see if anything has been done with it since.
Jim
"thsundel" wrote in message news:[email protected]...
Jim Koerner;2337983 Wrote:
> I have been trying to use patch policies for a while but can't seem to
> get
> them working very well. In 'Patch Policy Enforcement Settings' I have
> set
> a schedule using 'Date Specific' and 'Process immediately'. If I check
> the
> patch status policy I see 100 targeted/ 12 Effective/ 0 Not Effective/
> 88
> Pending. The 88 never move from pending even though almost all of them
> need
> the required patches. If I set the schedule to Recurring and 'When a
> device
> is refreshed' it basically tries to install the patches on every refresh
> cycle even though the device no longer requires the patches. This
> happens
> on every device targeted by the policy.
>
> Digging into the actually bundle that gets created I can see in the
> install
> actions the Install Frequency is set to 'Install always' which may
> explain
> why it runs through each patch every refresh when it is set to install
> on
> refresh.
>
> The documentation on this new feature doesn't go into much detail on how
> everything actually works. I would guess the correct functionality
> would be
> once a policy is enforced on a machine it would no longer try to keep
> installing the same patches from the policy since they are not needed.
> Using the Enforcement by 'Date Specific' seems to be broke also.
>
> Jim Koerner
> Server - ZCM 11.3.1FTF1 and Internal Database on Win2008R2x64
> Clients - ZCM 11.3.1FTF1 on Win7SP1x64
Could be this: http://www.novell.com/support/kb/doc.php?id=7015217
Thomas
thsundel
thsundel's Profile: https://forums.novell.com/member.php?userid=128
View this thread: https://forums.novell.com/showthread.php?t=480214
Yes, please do open a SR if you can..
Thomas

I have just upgrade my Iphone 5 to IoS7.03 and one particular mobile number under my contact will not deliver when I send a text message.

I can not send a text to a particular mobile number in my contact after the ioS7.03 update.
I can receive text from this number and I can call but I can not send.
I deleted the contact and all previous messages and reentered the mobile number in contact. Text messages are still undelivered.
Any suggestions>

I did solve the problem. I assumed because the message bubble was green that my friend had another type of phone. I was completely wrong! After I just made sure iMessage was on and restarted my phone it works just fine! So I guess iMessage was the problem ☺️

Why does my imessage say "not delivered" when i send a message?

I read about other people with this problem and i tried almost everything they said like pressing the on/offf button at the same time with the home buttton till i see the apple symbol which that did nothing then i reset all my settings which did nothing i need help i am starting to get ****** and i am about to ask for a refund.

IOS troubleshooting message http://support.apple.com/kb/ts2755
make sure you have good wifi/3G connection when sending imessage.

My printer will not print when i send it a attachment from my pc

please help

Hi Andykirsty,
I am guessing that you are using HP ePrint services.
What is it that you are trying to send to the printer?
Did you try send a different document.
If not please try sending an email with test on the subject and test on the body.
But if it is from PC.
If you are trying to print from your PC.
What is it that you are trying to send to the printer?
Did you try send a different document.
Let us know what kind of printer you are using and what is the operating system.
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

Excel not respondin when I send data

Similar Messages

Maybe you are looking for