Exception aggregation and Aggregates

Hello,
I have a Query (Material Stocks movements) with one key figure with exception aggregation by 0material. I build an aggregate to run this query faster, but I notice that with exception aggregation the query doesn't read the aggregate. When I run this query without exception aggregation, my query read the aggregate.
Is it possible to run this query with exception aggregation on aggregates?
Thanks,
Fabio.

Hi Brian,
I already checked in RSRT + Debug, When you run RSRT + Debug appears both, the aggregate and Infocube, but if you see in SM50 the process read just the Infocube. My aggregate has all characteristcs from my query, including the characteristic that I'm using like exception aggregation.
Thanks
Fabio.

Similar Messages

Explain Exception Aggregation and Aggregation?

Please search forums
Hi eXPERTS,
While creating Keyfigure infoobject there is an additional option called
Aggregation and it has Exception Aggregation plz explain abt this topics briefly.
Thank u,
Edited by: Pravender on May 21, 2010 1:19 PM

Hi,
there is a slight difference in between them.
When you select the Aggregation as Minimum then it will pass only the minimum values into the target.
Where as Exception Aggregation will be always based on some ref Characteristic, in this if you select the option as Minimum based on 0CALDAY Characteristic then it will show you the minimum values in the report but not in the target based upon the 0CALDAY Characteristic..
Aggregation will fetches the data into cube from PSA and exception aggr will fetches the data into report from cube.
just go through the example which was explained by some of our techie..
For Ex in PSA u have data like dis.
01.01.2007 1000
01.01.2007 2000 it will take only the minimum value into cube
In case if you have many records based on that particular date then it wont do the aggregation. Since you have chosen the ref char as 0CALDAY, there might be lot of records which have generated on the same day, so when you select this option then it wont do the aggregation and further it will place X in that area.
assign points if it helps..
regards,
ashok

FBL5 FIAR - exception aggregation - count customers with open items at key

Hello gurus,
I have read the information about counting all values in reference to a characteristic. I manage to count how many customers have a FIAR open item 'billing status' = Open in my FIAR cube.
Now I am asked to replicate transaction FBL5 of R3. This transaction will give you open items at a given key date by adding
the items with
A) Item status = 'O' and posting date <= key date
and the items with
B) Item status = 'C' and posting date < =key date and clearing date > key date.
I calculate the net value by creating 2 restricted key figures and then adding them in a CKF.
But for counting I have a problem. I can count how many customer make up the open items (case A)
and how many customers makeup items that where cleared between key date and today.(case B).
But I cannot sum the two numbers as there might be customers that are counted in both cases.
For example I have 4 customers that correspond to case A : 1000 1011, 1012 and 1014
And I have 3 customers that correspond to case B 1000 , 1011 and 1013
I would like to get 5 as the number of customers that verify either case A or case B (or both).
Is there a way to do this with the exception 'aggregation 'and 'count all values' property of CKF ?
Claudio

Hi,
The logic given in the above post may be a bit confusing to you. Check out this explanation and try to understand what I mean.
Posting Date - PD
Key Date - KD
Clearing Date - CD
PD--KD--
CD
-O(Status)-C--O-----C
-5107-----8
Let me explain the above table.
Between PD & KD there are 5 count with status'O' and 10 counts with status 'C'.
Between KD & CD there are c counts with status 'O' & 8 counts with status 'C'.
This means 5 with status 'C' becomes 7 between KD & CD.
Similarly, 10 status with 'O' becomes 8.
The logic I am trying to say is..
If you don't want to get counts with status 'C'(repeated) as I understood) 7-5 = 2. Show this 2 as count for status 'C' between KD & CD.
So the table will become like this now.
PD--KD--
CD
-O(Status)-C--O-----C
-5102(7)---2(8).
In braces shown are the total with status 'O'/'C' for the dates.
I hope this will solve your problem.
Message was edited by: AVR - IGA

Exception Aggregation & Cell Definition

Hi All,
Can someone please explain me what are Exception Aggregation and Cell Definition with some real time examples?
Many thanx in advance...
Best Regards,
Nene.
Message was edited by: Nene BW

Hi Nene,
Check out the below links
Exception Aggregation
http://help.sap.com/saphelp_nw04/helpdata/en/d2/e0173f5ff48443e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8e/08ab3d81534c64e10000000a114084/frameset.htm
hope it helps
Regards
Sajeed

What is the default exception aggregation for the NCKF IO STOCK

Hi all of you,
What is the default exception aggregation for the Non Cumulative Key Figure info object Stock?
When I am selecting Maximum, or minimum or Avereage (all values) its not selecting any of these values but only Average (weighted with the number of days) is getting selected.
Please explain.
Thank you.
TR.

Hi Vinod,
Thank you for your reply.
I had selected Last value as exception aggregation and activated it. But again when I double click on the IO STock, in the aggregation tab besides exception aggregation I find the option Average (Weighted with the number of days).
Is it getting selected by default when I check the radio button Ncum. value with in- and out-flow?
Please explain.
Thank you.
TR.

Constant Selections and Exception Aggregation

Hi,
Can You please tell me
1) what is constant selections?
2) what is Exception Aggregations?
Thanks and Regards.
Naresh.

Hi,
example for the use of standard aggregation and exception aggregation for a key figure is a key figure for the non-cumulative value
with non-cumulative values such as warehouse stock, you want to total up the warehouse stock for various articles and warehouses (standard aggregation), but for the month you want to determine the ending inventory (LAST aggregation) (exception aggregation in regard to the time characteristic Calendar Month)
for more info go through the below link
http://help.sap.com/saphelp_nw04/helpdata/EN/d2/e0173f5ff48443e10000000a114084/content.htm
For constant selection go through the belwo link
http://help.sap.com/saphelp_nw70/helpdata/EN/46/91f0f090ea13e8e10000000a155369/content.htm
Regards,
Marasa.

First and last exception aggregation

From one of the doc, I got the below info:
For FIR, LAS Exception Aggregation,
If being used for cumulative key figures: Completeness of values with respect to reference characteristic necessary.
If the reference charac being used is non time char. then Sorting is done ascending according to key (internal presentation)
Whatdo the above two points mean?
Thanks
Simmi

hi Simmi,
can please point the doc ?
1st point, with respect to reference characteristic, i think it means which characteristic to be used for reference, normally date (time characteristic);
date----
key figure
01.01.2007---- 10
02.01.2007-----20
10.01.2007-----30
then FIR/first will be 10; and LAS/last = 30
2nd point
if reference characteristic is non time characteristic, e.g zcustomer, then sort is done ascending according to key, e.g
zcustomer-key---description
001----
Simmi
002----
Linggam
003----
Prakash
and we have data
zcustomer------key figure
003----
10
001----
25
002----
70
then consider to FIR/LAS, this will be sorted as
zcustomer------key figure
001----
25
002----
70
003----
10
then FIR is 25 and LAS = 10
hope it's clear for you and help.

Zero-Elimination And Exception Aggregation

Hi experts,
I'd like to compress a cube with the option of zero-elimination. Online help says: "Zero-elimination is only allowed for InfoCubes that contain key figures with aggregation behavior u2018SUMu2019 exclusively." (http://help.sap.com/saphelp_nw70/helpdata/en/ca/aa6437e7a4080ee10000009b38f842/frameset.htm)
The key figures of the cube I like to compress all have aggregation = SUM but some of the key figures have exception aggregation <> SUM. Will the data of a cube still be fine after that compression?
Thank you for your ideas!
Volker

Dear Andrei Bushkevich and Swapnil Dharia,
thank you for your response! In my question there is a double ** wich originally stands for the sign of "NOT EQUAL".
So the sentence is:
"The key figures of the cube I like to compress all have aggregation = SUM but some of the key figures have exception aggregation NOT EQUAL SUM."
@Andrei Bushkevich
No that I've corrected the text - are you still sure that I can do the compression with zero-elimination?
Best Regards,
Volker

Formula Variable and Exception Aggregation

Hello
Please can you explain me how this works.
There is formula variable created on a change date.(Replacement Path) with replace with Key.
Then this formula variable is put in a formula as NODIM(Formula Var) and the exception aggregation is set as Total with Ref Char selected on the same date(Change Date).
Now this is coming up with values like 2202374. If i remove the exception aggregation then i get an X in the values. If i then include the change date in the rows i get the date.
Please can anyone let me know how this would be working. Effort Appreciated.
Thanks

Here is a scenario that might fit:
Formula is trying to show the latest change date without adding it as a drill down. The only discrepancy is that the exception aggregation would need to be set to maximum value instead of Total.

What is standard and exception aggregation?

What is standard and exception aggregation?

hi there ,
check out this link for scenarios of exception aggregation :
http://help.sap.com/saphelp_nw04/helpdata/EN/d2/e0173f5ff48443e10000000a114084/content.htm
regards,
Supriya

Exception aggregation

Hello all,
I have a problem with my query, i don't want to aggregate on a characteristic, i've tested many options by creating a formula with my characteritic and tried with several possibilities on exception aggregation but none is working.
If someone can help me.
Thank you by advance.

hello, here my report result:
Division     Material     Qty mouvement        mouvement value     Coût matière standard lot
1000        HB9754      2                               250 EUR                     200EUR
and i would like to obtain :
Division     Material     Qty mouvement        mouvement value     Coût matière standard lot
1000        HB9754      1                              150 EUR                     100EUR
1000        HB9754      1                              100 EUR                     100EUR
If you have more questions don't hesitate.
thanks by advance.

Exception Aggregation LAST

Hi all!
We use BCS and in my cube 0FISYEAR, 0FISPER3.
So i need to create KF like amount in the end of the period
I need to create Exception aggregate for my KF ?
Exception Aggregation LAST and Referen. char. 0FISPER3
Right?
Thanks!

Hello Vikram
One possible solution I can think of is to use an extra ODS in order to hold your data in an aggregated form that suits you. Unfortunately the exceptional aggregation behaviour does not work outside reporting thus in the transfer rules from your data provider to this new ODS you should add a formula checking whether the new record to be transfered to the ODS has a date newer than the ones already transfered in the ODS. Else it should skip the current record and proceed to the next one.
Another possible solution would be to use the APD and transfer the results of the query you are already playing in an ODS (this way you take advantage of the exceptional aggregation behavior) and by transfering your records to a second ODS you can achieve the aggregation you need.
Assign points if any of the above helped

Exception aggregation for calculated key figure

Is it possible to have exception aggregation for calculated key figure in BW 3.5? As per Note 1151857, it is possible, however this note applies to BI 7.0.
As per note 152638, it is possible in older version only simple ckfs like 'CKF = Base key figure'.
Is there any workaround to define exception aggregation for complex CKFs in BW 3.5?
My requirement is like this -
CKF = (sales quantity - forecast) %share (sales quantity).
Aggregation for CKF over time should be sum whereas, for all other characteristics calculation of CKF should be done after aggregation(normal scenario).
So, defining exception aggregation of CKF as 'Summation' over time should fulfil my requirement.
I can not use calculate result as 'summation' setting for CKF because of following design of report.
Report contains structure(characteristic)
Elements of structure are -
Last 3 months(April - June)
Last 3 months - 1 (Mar - May)
Last 3 months - 2 (Feb - Apr)
and so on...
When data is aggregated for each element of structure, base KFs will be aggregated and calculations will be done on that.
Changes in the backend are also not possible because, normal aggregation of CKF-alike in backend will be summation for all characteristics.
Is there any way in BW 3.5 to model such a scenario?
Thanks and Regards,
Anup Kulkarni

Sum of individual values of CKFs is not same as the Calculation on 'sum of basic key figures(result of basic key figures)'. - Yes, you are right.
I need to aggregate CKF over time as SUM. However, calculation for result of all other characteristics should be based on results of basic key figures and not the 'Sum of individual values of CKF'. -
What i understood is that whenever the time char is in row, then result should be simple on the sum what ur getting but when other char are there then it should go for calculation based on the sum of key figure.
If im not wrong in getting ur point.
How can two differenct activites be perofrmed on same key figure depending on the characteristic .....!. For this u have to think some other possibility or let somebody else update the thread.

Confused about Exception Aggregation

Gurus-
I'm rather confused about exception aggregation. I've reviewed[ Himanshu Mahajan's document in SDN|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0b8ed5b-1025-2d10-b193-839cfdf7362a?QuickLink=index&overridelayout=true], and I'm still confused.
Can someone offer some suggestions ?
Specifically, here's what I've got (by example):
Infocube Contents:
Record 1 - Vendor A, Material B, Value $100
Record 2- Vendor A, Material C, Value $200
I need to return
Vendor Material Value Sum of All Vendor's Records
My query results should look like this:
Row 1, Vendor A, Material B, Value $100, Sum $300
Row 2, Vendor A, Material C, Value $200, Sum $300
How can I accomplish this in a Bex 7 Query ? I'm fiddling with Exception Aggregates (Total) on Vendor but don't get what I need. I've played with a Calculated Key Figure with an Exception Aggregate (Total) on Vendor, but again, no joy.
Many thanks, o Gurus !

Hi,
As i can see from your report output you need a seperate column with the sum of values against vendor.
If that is your requirement then first apply exception aggregation as TOTAL with refernce characterstic as material.Now in the result you will get the total sum
According to your requirement now you need this in seperate column so make a new formula and use Sumct(value).
This will give you the desired ouput.
For more information on the same read the below links.
http://help.sap.com/saphelp_nw70/helpdata/en/45/6148bab9ac1deee10000000a155369/content.htm
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/007ba7a0-bcea-2b10-7e89-cbcb9db98a28
Hope it helps.
Regards,
AL
Edited by: AL1112 on Dec 30, 2011 5:38 AM

How to find the value of date char used as exception aggregation reference

Hi BI Gurus,
On a BEx report I need to list three things by material:
1)   the open (not yet delivered) Purchase Order quantities
2)   the PO quantity to be delivered next and
3)   the date that belongs to the next delivery
The model supports these data i.e. for each material I can list all open quantities by Purchase Order / Item / Schedule line and the scheduled delivery dates are also available as a characteristic.
Determining 1) is easy as the drilldown is fixed (materials only) the open quantities get summarized for all PO-s belonging to the materials.
To determine 2) I used a Calculated KF simply including KF 1) =Open PO Qty in the definition and setting Exception Aggregation (first value) with a reference char of the delivery date. This gives back the Open PO Quantity to be delivered first.
My question is about how to determine the 3rd value (actually this is not a KPI but a characteristic value). In other words, for each materials I would need to determine the first among all of the possible delivery date char values of the open PO Items / schedule lines. This is the date the quantity shown in the 2nd KPI will be delivered on.
Does anybody have an idea how to approach this issue?
Thanks for you help in advance,
Attila

Hi Olivier,
Thanks for your suggestion. I got a bit closer with the replacement path formula variable and the CKF. I tried to apply the same logic of KPI 2) but for some reason it did not work. Actually, it delivers the right value but only when 0SCL_DELDAT (Scheduled delivery date) is in the drilldown But what I need is the first delivery date by Material only, and without this 0SCL_DELDAT drilldown.
Any other ideas?
Thanks and bye,
Attila

Exception aggregation and Aggregates

Similar Messages

Maybe you are looking for