Confused about Exception Aggregation

Gurus-
I'm rather confused about exception aggregation. I've reviewed[ Himanshu Mahajan's document in SDN|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0b8ed5b-1025-2d10-b193-839cfdf7362a?QuickLink=index&overridelayout=true], and I'm still confused.
Can someone offer some suggestions ?
Specifically, here's what I've got (by example):
Infocube Contents:
Record 1 - Vendor A, Material B, Value $100
Record 2- Vendor A, Material C, Value $200
I need to return
Vendor Material Value Sum of All Vendor's Records
My query results should look like this:
Row 1, Vendor A, Material B, Value $100, Sum $300
Row 2, Vendor A, Material C, Value $200, Sum $300
How can I accomplish this in a Bex 7 Query ? I'm fiddling with Exception Aggregates (Total) on Vendor but don't get what I need. I've played with a Calculated Key Figure with an Exception Aggregate (Total) on Vendor, but again, no joy.
Many thanks, o Gurus !

Hi,
As i can see from your report output you need a seperate column with the sum of values against vendor.
If that is your requirement then first apply exception aggregation as TOTAL with refernce characterstic as material.Now in the result you will get the total sum
According to your requirement now you need this in seperate column so make a new formula and use Sumct(value).
This will give you the desired ouput.
For more information on the same read the below links.
http://help.sap.com/saphelp_nw70/helpdata/en/45/6148bab9ac1deee10000000a155369/content.htm
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/007ba7a0-bcea-2b10-7e89-cbcb9db98a28
Hope it helps.
Regards,
AL
Edited by: AL1112 on Dec 30, 2011 5:38 AM

Similar Messages

Exception aggregation doesn't work correctly

Hi,
Here we have a problem about exception aggregation, we created two queries. One is based on the
InfoCube, another is based on the DSO.
Both queries have the same definiation. And the data of the InfoCube is from the DSO.
In the query definition we created a formula and in this formula we used a exception aggregation.
For example, we used count all value <> 0 and reference to city in exception aggregation to count
all city which sales value above certain value.
We got the different result from these two queries.
The result in the DSO is what we neend.
Can you tell me why I got the different result?
Our system information is:
SAP NetWeaver 2004s
SAP_ABA     700     0009     SAPKA70009     Cross-Application Component
SAP_BASIS     700     0009     SAPKB70009     SAP Basis Component
PI_BASIS     2005_1_700     0009     SAPKIPYJ79     PI_BASIS 2005_1_700
SAP_BW     700     0009     SAPKW70009     SAP NetWeaver BI 7.0
BI_CONT     703     0000          -     Business Intelligence Content
Thanks

Jin,
Ideally one way to find out if exception aggregation is working fine is to drill down based on the exception aggregation characteristic and see if the formula is being calculated right...
Arun

FBL5 FIAR - exception aggregation - count customers with open items at key

Hello gurus,
I have read the information about counting all values in reference to a characteristic. I manage to count how many customers have a FIAR open item 'billing status' = Open in my FIAR cube.
Now I am asked to replicate transaction FBL5 of R3. This transaction will give you open items at a given key date by adding
the items with
A) Item status = 'O' and posting date <= key date
and the items with
B) Item status = 'C' and posting date < =key date and clearing date > key date.
I calculate the net value by creating 2 restricted key figures and then adding them in a CKF.
But for counting I have a problem. I can count how many customer make up the open items (case A)
and how many customers makeup items that where cleared between key date and today.(case B).
But I cannot sum the two numbers as there might be customers that are counted in both cases.
For example I have 4 customers that correspond to case A : 1000 1011, 1012 and 1014
And I have 3 customers that correspond to case B 1000 , 1011 and 1013
I would like to get 5 as the number of customers that verify either case A or case B (or both).
Is there a way to do this with the exception 'aggregation 'and 'count all values' property of CKF ?
Claudio

Hi,
The logic given in the above post may be a bit confusing to you. Check out this explanation and try to understand what I mean.
Posting Date - PD
Key Date - KD
Clearing Date - CD
PD--KD--
CD
-O(Status)-C--O-----C
-5107-----8
Let me explain the above table.
Between PD & KD there are 5 count with status'O' and 10 counts with status 'C'.
Between KD & CD there are c counts with status 'O' & 8 counts with status 'C'.
This means 5 with status 'C' becomes 7 between KD & CD.
Similarly, 10 status with 'O' becomes 8.
The logic I am trying to say is..
If you don't want to get counts with status 'C'(repeated) as I understood) 7-5 = 2. Show this 2 as count for status 'C' between KD & CD.
So the table will become like this now.
PD--KD--
CD
-O(Status)-C--O-----C
-5102(7)---2(8).
In braces shown are the total with status 'O'/'C' for the dates.
I hope this will solve your problem.
Message was edited by: AVR - IGA

How to find the value of date char used as exception aggregation reference

Hi BI Gurus,
On a BEx report I need to list three things by material:
1)   the open (not yet delivered) Purchase Order quantities
2)   the PO quantity to be delivered next and
3)   the date that belongs to the next delivery
The model supports these data i.e. for each material I can list all open quantities by Purchase Order / Item / Schedule line and the scheduled delivery dates are also available as a characteristic.
Determining 1) is easy as the drilldown is fixed (materials only) the open quantities get summarized for all PO-s belonging to the materials.
To determine 2) I used a Calculated KF simply including KF 1) =Open PO Qty in the definition and setting Exception Aggregation (first value) with a reference char of the delivery date. This gives back the Open PO Quantity to be delivered first.
My question is about how to determine the 3rd value (actually this is not a KPI but a characteristic value). In other words, for each materials I would need to determine the first among all of the possible delivery date char values of the open PO Items / schedule lines. This is the date the quantity shown in the 2nd KPI will be delivered on.
Does anybody have an idea how to approach this issue?
Thanks for you help in advance,
Attila

Hi Olivier,
Thanks for your suggestion. I got a bit closer with the replacement path formula variable and the CKF. I tried to apply the same logic of KPI 2) but for some reason it did not work. Actually, it delivers the right value but only when 0SCL_DELDAT (Scheduled delivery date) is in the drilldown But what I need is the first delivery date by Material only, and without this 0SCL_DELDAT drilldown.
Any other ideas?
Thanks and bye,
Attila

Confuse about the injecting entity in EJB 3.0?

Hi all,
I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
this is inside on EJB...............
public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
@PersistenceContext(unitName="SavingAccounts")
EntityManagerFactory emf;
EntityManager em;
/** Creates a new instance of CustomersBean */
public CustomersBean() {
public void create(int id, String name, String address, String telno, String mobileno)
try{
//This is the entity.
Customer _customer = new Customer();
_customer.setId(id);
_customer.setName(name.toString());
_customer.setAddress(address.toString());
_customer.setTelno(telno.toString());
_customer.setMobileno(mobileno.toString());
em = emf.createEntityManager();
em.persist(_customer);
emf.close();
}catch(Exception ex){
throw new EJBException(ex.toString());
in web application, i'm using the @EJB in customer servlets.
public class CustomerProcessServlet extends HttpServlet {
@EJB
private CustomersRemote customerBean;
blah blah inject directly coming request field from jsp.
}

Hi all,
I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
this is inside on EJB...............
public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
@PersistenceContext(unitName="SavingAccounts")
EntityManagerFactory emf;
EntityManager em;
/** Creates a new instance of CustomersBean */
public CustomersBean() {
public void create(int id, String name, String address, String telno, String mobileno)
try{
//This is the entity.
Customer _customer = new Customer();
_customer.setId(id);
_customer.setName(name.toString());
_customer.setAddress(address.toString());
_customer.setTelno(telno.toString());
_customer.setMobileno(mobileno.toString());
em = emf.createEntityManager();
em.persist(_customer);
emf.close();
}catch(Exception ex){
throw new EJBException(ex.toString());
in web application, i'm using the @EJB in customer servlets.
public class CustomerProcessServlet extends HttpServlet {
@EJB
private CustomersRemote customerBean;
blah blah inject directly coming request field from jsp.
}

Exception aggregation on Non-cumulative key figure

Dear experts,
I have a problem. We have an InfoCube in BW in which the Activity Journals are loaded every day. In this Activity Journals it is registered that a Material was listed (available) at a customer (value 0 or 1).
We have a non-cumulative key figure MXW_LISTN with inflow (MXW_LISTI) and outflow (MXW_LISTO). In time this key figure receives +1 or -1 for a customer, material combination.
I want to use MXW_LISTN in the query in a specific way. The key figure on itselve tells me how many listings there are. However, I want to know how many business partners there are with a listing.
I was thinking about an exception aggregation on MXW_LISTN with reference characteristic 0BPARTNER and "Count <> 0". BW however refuses to do so and only lets me do simple aggregations such as AVG, MIN, MAX etc.
Can you think with me and come with an proper solution to count the number of business partners with a listing?
Your help is very much appreciated and rewarded!
Best regards, Hans de Klein

Maybe a solution with virtual key figures is an option?
Please help me out!
Best regards, Hans de Klein

Confusion about TreeMap

Hi,
I'm currently studying for SCJP exam and am confused about the following code.
     public static void main(String[] args) {
     TreeMap myMap = new TreeMap();
     myMap.put("ab", 10);
     myMap.put("cd", 5);
     myMap.put("ca", 30);
     myMap.put("az",20);
     NavigableMap myMap2 = myMap.headMap("cd", true);
     myMap.put("bl",100);
     myMap.put("hi",100);
     myMap2.put("bi", 100);
     System.out.println(myMap.size() + " " + myMap2.size());
     }When I run it, it outputs 7 6.
What I'm confused about is how when after the line NavigableMap myMap2 = myMap.headMap("cd", true);and values are being entered into the myMap object, that it is still possible for them to be entered in the NavigableMap object? Are the 2 entities not seen seperately? Is it to do with the "inclusive" field of the headMap method.
The solution states that the myMap contains the objects "ab","cd","ca","az","b1","h1","bi"
and myMap2 "ab","cd","ca","az","b1","bi".
But how when adding key-value pairs do both objects (myMap,myMap2) get considered for putting into?
Thanks.

From the API:
headMap
public NavigableMap<K,V> headMap(K toKey,
boolean inclusive)
Description copied from interface: NavigableMap
Returns a view of the portion of this map whose keys are less than (or equal to, if inclusive is true) toKey. The returned map is backed by this map, so changes in the returned map are reflected in this map, and vice-versa. The returned map >supports all optional map operations that this map supports. So myMap2 contains all the elements from myMap that are <= "cd" (which are all except "hi"), and changes in either map are reflected on both, as stated.

'Average Weighted with Calendar Days' in Exception Aggregation

Dear specialists,
I have created a query with a lot of calculated keyfigures.
One of my calculated keyfigures shows percentage values.
When I select a calendar day, my report shows correct results
for the percentage values.
But when I execute the report without selecting a calendar day,
I get strange results like 3,21 % instead of 97,49 %.
There is a new functionality with version 7.0, where we can set
Aggregation properties like 'Average Weighted with Calendar Days' .
But when I select this with Ref. characteristic 'calendar day',
my report does not show any value or any result.
Are there any other properties to set in Aggregation or Calculations.
Please give me more information about this issue
regards Osman Akuzun

Hi,
       When you define an Exception aggregation on number of work days. There might be some reference characteristic defined in your Bex.
For exmaple, take a scenario like below. Your BW data is like below
0Employee           StockIssued
XXX                            50
XXX                            10
YYY                           20
YYY                            30
YYY                            40
ZZZ                            50
ZZZ                            100
ZZZ                            30
Suppose the first row which has values like XXX and 50 is not a working day and remaining all are working days then the exception aggregation applied using AV2 on the characteristic 0Employee will be caluclated in your Report as below
For XXX, it will       10/1 = 10 (because only 1 working day for the employee XXX)
For YYY, it will       90/3 = 30 (because all 3 are working days for the employee YYY)
For ZZZ, it will       180/3 = 60 (because all 3 are working days for the employee ZZZ)
This is how the exception aggregation works. Try to see the similar kind of example in your system and try to relate in the same lines explained by me. You can understand.
Regards
Sunil

Confused about cpu information here can you help plz

if you look below at this link
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=579850&Sku=CP1-P430008NC&SRCCODE=PRICEGRABBER
Manufacturer Part No: BX80532PG3000D is right here but now look at this website below
http://www.pricegrabber.com/search_getprod.php/masterid=779130/search=intel%2520pentium%25204/ut=c723210b9e568565
the manufaturing number are the same but if you read the info on the first link it says 3.6Ghz and the seconed link says 3.0Ghz now is there a BIG (_*_) Mistake or are the company TigerDirect being too specific causing me to be insane lol huh ? Please help me I am trying to get a 3.2Ghz chip egzactley the same as in link 2 but 3.2Ghz not 3.0Ghz are they out yet?
Please help Thank You very much :P

I am so happy that I am an MSI guy here at this lovely forum I mean you all helped me so much and you did not have to but I do apreesheate it a lot from you guys I do know that I will be tossing plenty of money in to this chip but the reason why it so high at tigerdirect is because you are paying for there name brand and there product but I love shoping at there store because they are always polite there over the phone and I always get there best service there so I don't mind paying an extra few hundread dollors for there stuff.
The reason for tossing so much money into this machine is no im not rich we or shall I say I am avrage I have a good job and still live with my parants so I have no utility bills to pay except insurance for my car every month but other then that I can save up quickley if I manage my money the right way hehe. But anywho I paid for the new from soyo SY-P4i875P Dragon2 Platinum Edition Motherboard capable of 3.02Ghz and will have a 3.00Ghz in it with HT I bought it from http://www.Outpost.com/ witch I did love there service all around but if you pay by check be prepared to wait for 2 weeks lol god lee don't they know wow to torture there customers hehe so plz use money orders hehe but they sent it airborne express I belive thats what it is called correct me if im wrong. and that was quick hehe and also they make sure the person gets it too by having me sign for the package hehe I love how that works.
I guess you guys are like havent he heard of paragraphs hehe:) Nope sure havent but since I went all out on video and sound I thought hey you know what why don't I dump this AMD and go for Intel pentium but before this desicion came around I was working on my Shuttle AK31 v3.1 and come to find out I ordered the wrong cpu when after I upgraded my bios to handle the xp2100+ cpu 1.73Ghz Thurobroud and was running the 1900+ 1.60Ghz Palimieo or what ever it was called but find out it would on;y run the paliminio chip so I was like well I don't want to overclock my board and put any stress on the board so I will put that 1900+ back in so I take my computer apart and go to take off the volcano 7+ fan made by thermaltake and requires a screwdriver flathead and a bit of skill in there words be carfull and use our product at your risk...lol
anyways the scredriver sliped and broke off a micro transister and I was like oh crap and could had cryed for damaging my babie but I belive it was time to move on and that is why it hapened when it did hehe..
but I called tigerdirect to get back on to the subject and told them what I was confused about and magell was his name I believe and he said yes it was a 3.00Ghz and the HT was what made it clock like a 3.06Ghz processor. So I was like wooo thats a relief and was so happy now I will order all of this below hope yo like my system hehe I know I will.
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?sku=C13-5100
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=471762&Sku=T925-1050&CatId=795
http://www.cyberguys.com/templates/searchdetail.asp?T1=148+0070
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=579850&Sku=CP1-P430008NC
Pricie hu I will have over 3 grand in my computer lol thats a lot for my hobby but the games are ausome let me tell ya I can't wait for half live 2 I think to come out and I love war games and sniper games like counter strike the graphics are grate
Also I heard that intel is making a chip next year called the Xeron or somthin and will be 4.00Ghz with HT and the i874 and i8875 chip sets might not be compatible if they change there chip desighn could this also be true too has any one heard this or not? but I will let you go and give your eyes a rest but I thought I should thank yo both for your help and the link I do apreesheate it a lot and hope that everything runs smooth and fast You think?

Confusion about applet

sir
i have confusion about applet that if an applet compile successfully but on running it shows a exception message about "main"that no such method exist.help me out please

The full text of the error message would make it easier for us to see what is wrong BUT it sounds like you are trying to run the Applet as an applicaiton from the comand line rather than through an HTML tag in an HTML page loaded into your browser!
Though you can make Applets run as applications it not normal to do so.

I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. My iBook library does not show up in iTunes.

I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. Some of my iBooks show up in my iTunes but they are "grayed" out. The only books that respond in iTunes are audiobooks and that's not what I'm looking for. Is this a stupid question?

Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

Confused about logical table source

Hi,
I'm confused about logical table source(LTS), there are 'General', 'Column Mapping', 'Content' tabs in
LTS, in General tab ,there are some information,like 'Map to there tables' and 'joins',
just here, we have created relationships in physical layer and BMM layer, so I would like to ask what's the use of the 'joins' here?

Hi Alpha,
Valid query, when you establish a complex join it is always between a logical fact and dimension table.Consider a scenario,
Example:w_person_dx is an extension table not directly joined to a fact but joins to a dimension w_person_d.
When you model the person_d tables in BMM, you ll have a single logical table with w_person_d as source.If you have to pull columns from both w_person_d and w_person_dx tables in a report, you add dx table as inner join to persond table in the general tab.Now when you check your physical query, you can see the inner join fired between the two dimensions.
Rgds,
Dpka

Exception Aggregation help in Bex !

Hi Experts
    Iam creating a query with date calculations. I have the following calculations in my qry...
1 . Cycle Time      : ( Doc Date - Quote sent date) ....I created two replacement path variables and use them in formula.
2 . Nr of Quotes    : ( Count of all sales orders with Block L1 & L2) ...I created a CKF for counting the nr of docs then used that CKF in an RKF to filter by block.
3 . Avg Tender Time : ( Nr of Quotes / Doc date - Quote rec Dt) .........Created a formula same as 1 with Quote rec dt instead of Quote sent then created another formula to make 2/3.
    Now when I execute the query Iam getting numbers but
    Cycle Time I took Exception Aggregation as Counter for all detailed values and ref char as Doc Date....Its giving some nr as output...but my question is if I take doc date as Ref char how it gets the calculation from replacement
    Does any one have worked on date calculations as the above situation / any one have any how to's which explaines how to find date calculations with exception aggregations?
Thanks in advance...

fixed

Bex Exception Aggregation in 3.5 equivalent to 'TOTAL'

Hi All,
Can anyone help me in getting a functionality equivalent to exception aggregation 'TOTAL' in BW 3.5.
I have a requirement which can only be fixed using the exception aggregation 'TOTAL', my bad in my current client they dont have BI 7.0. So can anyone tell me what is the equivalent function of 'TOTAL' in BW 3.5.
Regards,
Anand

I need to develop a report which will show Org unit & degree (education data) wise head count and annual salary.
As the education records for an employee will be more than one, the annual salary will be doubled or tripled in the DSO or cube.
If I do an average of annual salary based on employee the overall result goes wrong.
Say for example, empl 20045789 as three record with KF value 10,000, the result in the report I see as 30,000.
SAY in the backend
EMPLOYEE    | Degree | Annual Salary
20045788 |     A | 50,000
20045788 |     B | 50,000
20045789 |     A |10,000
20045789 |     B |10,000
20045789 |     C |10,000
In the query I get it as
Org Unit |      Employee |     Annual Salary | Average(Annual salary/ Number of employee)
100001 |           20045788 |     100,000 |          50,000
100001 |          20045789 |     30,000    |          10,000
overall result                130,000 |          26,000 (130,000/5)
The expected result is 50,000 + 10,000 = 60,000 / 2 = 30,000.
Pls provide me solution.
Regards,
Anand
Edited by: araj123 on Jun 3, 2011 3:45 AM
Edited by: araj123 on Jun 3, 2011 3:46 AM
Edited by: araj123 on Jun 3, 2011 3:47 AM
Edited by: araj123 on Jun 3, 2011 3:48 AM
Edited by: araj123 on Jun 3, 2011 3:50 AM
Edited by: araj123 on Jun 3, 2011 2:25 PM

Confused about Exception Aggregation

Similar Messages

Maybe you are looking for