Exception and Error Handling from SRDemo giving duplicate errors.

Hi ,
I used code from SRDemo for Exception Handling and its giving me issue that all the error are get duplicate for every exception .
I have debug it because of reportErrors(final PageLifecycleContext ctx) invoked twice with same Exception in it .
Its get duplicated in UI .
Thanks in advance.

A small update. I tried again by upgrading the PCO version to 15.0 But still the same.
I did the following 2 test cases:
Unplug the UTP cable to the PLC and write data via PCO query
Disable the agent instance and write data via PCO query
In both cases the PCO Query returned the following output:
Success: 1
LastErrorMessage: <empty>
The only information that I get is in the results but it is not a good practice to interpret this because I don't know all the possible messages.
Result for Case 1:
<?xml version="1.0" encoding="UTF-8"?><Rowsets CachedTime="" DateCreated="2015-03-26T14:13:18" EndDate="2015-03-26T14:13:12" StartDate="2015-03-26T13:13:12" Version="14.0 SP5 Patch 12 (1-okt-2014)">
    <Messages>
        <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/ProductDescription: Unspecified error</Message>
        <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/ProductDescription: Operation failed</Message>
    </Messages>
</Rowsets>
Result for Case 2:
<?xml version="1.0" encoding="UTF-8"?><Rowsets CachedTime="" DateCreated="2015-03-26T12:11:37" EndDate="2015-03-26T12:11:35" StartDate="2015-03-26T11:11:35" Version="14.0 SP5 Patch 12 (1-okt-2014)">
    <Messages>
        <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/OrderQuantityTarget: java.net.ConnectException: Connection refused: connect</Message>
        <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/OrderQuantityConfirmed: java.net.ConnectException: Connection refused: connect</Message>
    </Messages>
</Rowsets>
Please advice. I cannot provide any transaction integrity at this time. I would assume this to be one of the base principles of PCO.

Similar Messages

BAPI to export features of Exceptions and Jump query from BW system to othe

Is there any BAPI is available to export features of Exceptions and Jump query from BW system to other SAP or Non SAP system, whereas won't need to re-define Exceptions and Jump Query. I mean directly export features of Exceptions and Jump query from BW system to other system.
Thanks,
Rohan

Thanks for quick response.
I am working on Hyperion, they are using essbase, and Integration connector to connet BW directly and takes data from BW System.They have features to define Exceptions(Traffic Light) and Jump query in the Hyperion side. But now they want to import directly features of Exceptions(Traffic light) and Jump query from BW System(using BAPI) instead of defining Exceptions and Jump Query in the Hyperion side.
Please help me on this.
Thanks,
Rohan

ORA-19511: Error received from media manager layer, error text:

Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
Wahid

Hi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid

Error:- "Response from server contained an error"

Hi,
I'm getting an error while running the dashboard Report.
It works find for two times but third time the error message comming up in dashboard Top left below dashboard prompts saying "Error:- Response from server contained an error"
I'm accesiing OBI dashboard from EBS.
Appreciate your help.
Thanks

Hi,
We also faced the same error some time back when clciking on dashboard items is logging us out.Finally we moved the dashboard pages from that dashboard to newly created dashboard and the problem is resolved.
Please check below step also .
1) When you are clicking on Dashboard was all services are up and running ,oc4j?
2. check your dashboard link also might be having symbols like &????.
Hope this help's
Thanks
Satya

Error handling from PCO Query

Hi,
In my project I am integrating with a PLC through SAP PCO and OPC server.
I am currently testing error handling if something fails on any of the involved systems.
As a first test I stopped the agent instance that I use to read data from the PLC.
When I try to write through the agent instance with a PCO Quaery I get no errors.
The 'Success' attribute of the PCO Query is 1.
The 'LastErrorMessage' attribute is empty.
The only indication is the 'Output'which contains an error message.
<?xml version="1.0" encoding="UTF-8"?>
<Rowsets CachedTime="" DateCreated="2015-03-19T09:58:49" EndDate="2015-03-19T09:58:48" StartDate="2015-03-19T08:58:48" Version="14.0 SP5 Patch 12 (1-okt-2014)">
     <Messages>
          <Message>PoederMagazijn/ATS PLC/General/NewDataReady_InputTypeMessage: java.net.ConnectException: Connection refused: connect</Message>
     </Messages>
</Rowsets>
However, the same <Message> tags are used for success messages as well. So there is no clear way to identify an error.
Is there any other way I can be sure the PCO query was able to write and catch any errors?
FYI: we are using PCO 2.3 and MII 14.0
Thanks!

A small update. I tried again by upgrading the PCO version to 15.0 But still the same.
I did the following 2 test cases:
Unplug the UTP cable to the PLC and write data via PCO query
Disable the agent instance and write data via PCO query
In both cases the PCO Query returned the following output:
Success: 1
LastErrorMessage: <empty>
The only information that I get is in the results but it is not a good practice to interpret this because I don't know all the possible messages.
Result for Case 1:
<?xml version="1.0" encoding="UTF-8"?><Rowsets CachedTime="" DateCreated="2015-03-26T14:13:18" EndDate="2015-03-26T14:13:12" StartDate="2015-03-26T13:13:12" Version="14.0 SP5 Patch 12 (1-okt-2014)">
    <Messages>
        <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/ProductDescription: Unspecified error</Message>
        <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/ProductDescription: Operation failed</Message>
    </Messages>
</Rowsets>
Result for Case 2:
<?xml version="1.0" encoding="UTF-8"?><Rowsets CachedTime="" DateCreated="2015-03-26T12:11:37" EndDate="2015-03-26T12:11:35" StartDate="2015-03-26T11:11:35" Version="14.0 SP5 Patch 12 (1-okt-2014)">
    <Messages>
        <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/OrderQuantityTarget: java.net.ConnectException: Connection refused: connect</Message>
        <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/OrderQuantityConfirmed: java.net.ConnectException: Connection refused: connect</Message>
    </Messages>
</Rowsets>
Please advice. I cannot provide any transaction integrity at this time. I would assume this to be one of the base principles of PCO.

File Adapter Error Handling from Batch job

Dear all,
I'd like to handle error information by batch job process.
However I can't find out the error flag from the file adapter.
My XI setting is below.
1.FIle to File conversinn by using File adapter
2.Async setting
3.Not use BPM
Anyway,we only want to judge the status for XI process from Batch process like MS-DOS batch.
Kindly please tell me the detail explanation.
Regards,
Masayuki.

Hi Masayuki,
Please take a look at these..
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/09714d543b11d1898e0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/0971c2543b11d1898e0000e8322d00/frameset.htm
cheers,
Prashanth

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Error Handling: VI response to any error

Hey guys,
I need to make sure a piece of code executes whenever there is any error in the VI. I'm pretty new to Labview, and cannot wrap my head around "extracting" the errors, so I can pass them into an error handler... All I want, is for my code to find out that there is an error, take some action, and then stop execution.
Any help is greatly appreciated, thanks!
Solved!
Go to Solution.

You simply wire the error wire to the selector of a case structure. Click on file/new/from template/frameworks/SubVI with Error Handling
=====================
LabVIEW 2012

I just updated software for my ipod..each time i connect my ipod i get a error message from itunes..a error message of 0xe800000a what does that mean????

i just updated the latest software for my ipod....now i'm getting a error message from itunes of 0xe800000a what does that mean????

See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Error Handling from exe.

I have a runbook that monitors a folder and when any file is dropped into this folder it runs an console application (exe) written in C#. I would like the runbook to send an email on failure and have set up this step but while testing the runbook and forcing
the application to fail the runbook still completes successfully.
From what I understand, if the application runs successfully it should return a exit code of 0. I am seeing large negative numbers in the exit code property when the application should fail but the runbook still completes with a status of successful.
Any help with catching these failures would be greatly appreciated.
Thanks

Hi,
the author of the Activity decides when the Activity fails. The "Run Program" Activity fails if the program could not be started. In my point of view this is good as it is.
If the Activity does not fail you have no Published Data in Error summary text. In your" Run Program" the error should be listed in Pure Output.
You cannot manipulate the completion status of the whole Runbook with one Activity in a supported way. I think also this is not needed.
You can run C#- and PowerShell-Code with the "Run .Net Script" Activity. I get the Exception in PowerShell with:
try
#code that did not interest you here
catch [Exception]
return $_.Exception.Message
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Error handling from MAXL into a batch file

Hello all
I need to know how do we pass a value to a batch file from MAXL script if an error occurs.
I have used the following in my MAXL to catch an error.
========================
login username password on server01;
Iferror 'error';
Define Label 'error';
Exit;
=======================
In the batch file I used:
If %errorlevel% NEQ 0 goto catch
:catch
echo an error occurred during MAXL script
Exit
========================
This doesnt give me any error even the login info is wrong in the MAXL script
Please correct if this is wrong and provide any help if possible
Thanks in advance

Here's the error checking code I used in my last not-DOS-but-we-call-it-that script:
REM Call MaxL script with parameters
REM The 2>&1 at the end of the below line merges CMD's STDERR into STDOUT
%hyperion_home%\products\essbase\essbaseclient\bin\essmsh.exe %batAutomation%\%esbAppName%\MaxL\%mshScriptName%.msh %esbUsername% %esbPassword% %esbServer% %esbAppName% %mshScriptName% %batDrive% %batAutomation% >>%log% 2>&1
REM Test for MaxL execution errors
IF NOT %ERRORLEVEL% == 0 (SET errormsg=Error! - MaxL script %mshScriptName%.msh failed with ERRORLEVEL %ERRORLEVEL% & GOTO ERROR)The 2>&1 command at the end of the MaxL script line merges STDOUT and STDERR into an overall log file I used for other processes as well as MaxL. It's great for that purpose, but unfortunately logs the username and password -- this would be overcome by encrypting those values. It was acceptable for the solution so I didn't lose any sleep over it.
Regards,
Cameron Lackpour

Basic error handling: how to catch all errors in a portion of code (and act accordingly)

I have a portion of code in a VI that I know is likely to fail at some point (opening a file, then reading two arrays from it: the file can be absent, or contain the wrong data).
I would like to be able to catch any errors that may occur during this procedure, and if such an error occurs launch a pre-defined action (return a default value, for instance).
Is there a simple way to do this, in a way similar to the disabling of a portion of code with a Diagram Disable structure ?

use the "bundle by name" function to set the individual elements of the error cluster to the values you want.
CLA, LabVIEW Versions 2010-2013

IPod Touch Locked and the Password forgotten; Computer giving an error

I changed my password and forgot it not long after. The iPod is telling me to connect to iTunes on the computer, and then iTunes tells me to unlock my iPod to access it.
Help? I really need to access it.
Thanks!

- First:
How to restart the Apple Mobile Device Service (AMDS) on Windows
- Then place the iPod in Recovery mode and connect to your computer and restore via iTunes.

Dashboard showing Error (! Error : Response from server contained an error)

Hi All,
We are facing a problem while accessing the dashboard page, when user log's in and access the dashboard page.
At this point the report start rendering, after sometime during the report rendering process we use to get this error on top of the dashboard page.After this error there were not output for any of the report on that dashboard page.
At times when user switch the page and come back to this page, reports shows the result.But most of the time user has to logout and login back, but same problem use to persist.
I have gone through with NQS Server.log and NSQ Query log., dint helped much.
Any suggestion or guidance will be really helpful.
Regards
-Saurabh

No Rhys, I have not done any kind of changes in repository, This error is suddenly start coming up..and its more frequent now..I am not sure whats happening..Is it coz of the more data load and the server is not able to process the request..but i am not able to figure out anything from the log's.
Once the error is there the user have to either switch between the pages , or have to logout and logback in..Earlier user use to do that to avoid this..But for some days even after loggin back in is not helping..
Also i have noticed one more thing, when i run the report in the Citrix server..the probablity of error is very less.
However when user run the report from there machine, they are frequently getting the error.
Thanks
-Saurabh

Photo upload failed. Error returned from Facebook: An unexpected error has occurred. Please try your request later

I've been getting this error everytime I try to upload photos to the Facebook publishing service has anyone encountered this before? upload through flicker is fine though

I am getting the same error. Did you have any luck getting this to work?

Exception and Error Handling from SRDemo giving duplicate errors.

Similar Messages

Maybe you are looking for