Exception appearing when trying to view remote portlet preferences

Hi all,
I'm trying to view the preferences for some of my remote porlets via the Portal admin console.
However, I get the exception below appearing when I do.
I'm apologise for blunt (and possibly uninteresting ), but if anyone is able to help that would be greatly appreciated!
Regards,
Jonathan
com.bea.portlet.prefs.spi.PreferenceStoreException: Currently doesn't support multi-valued properties!
     at com.bea.wsrp.consumer.adapter.customization.RemotePreferencePersistenceDelegate.getPropertiesInternal(RemotePreferencePersistenceDelegate.java:859)
     at com.bea.wsrp.consumer.adapter.customization.RemotePreferencePersistenceDelegate.getPreferences(RemotePreferencePersistenceDelegate.java:124)
     at com.bea.portlet.prefs.spi.PreferencePersistenceDelegate.getPreferences(PreferencePersistenceDelegate.java:79)
     at com.bea.jsptools.portal.helpers.PortletHelper.getPortletPreferences(PortletHelper.java:1118)
     at com.bea.jsptools.portal.helpers.PortletHelper.doShowDetails(PortletHelper.java:354)
     at portalTools.instances.portlets.details.DetailsController.getResources(DetailsController.java:92)
     at sun.reflect.GeneratedMethodAccessor591.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
     at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
     at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
     at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
     at global.internal.AbstractBaseController.internalExecute(AbstractBaseController.java:348)
     at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
     at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
     at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
     at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1170)
     at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1201)
     at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
     at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
     at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.render(PageFlowStubImpl.java:135)
     at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:290)
     at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:426)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:712)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
     at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:375)
     at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:341)
     at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:188)
     at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:142)
     at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:377)
     at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:253)
     at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:194)
     at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:266)
     at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.java:656)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: com.bea.wsrp.faults.TransportException: Currently doesn't support multi-valued properties!
     at com.bea.wsrp.faults.FaultInstanceFactory.getException(FaultInstanceFactory.java:94)
     at com.bea.wsrp.proxy.ProxyBase.raiseFault(ProxyBase.java:760)
     at com.bea.wsrp.proxy.ProxyBase.invoke(ProxyBase.java:478)
     at $Proxy56.getPortletProperties(Unknown Source)
     at com.bea.wsrp.consumer.adapter.customization.RemotePreferencePersistenceDelegate.getPropertiesInternal(RemotePreferencePersistenceDelegate.java:849)
     ... 96 more

Hi Kevin,
The producer is JBoss.
It turns out that the producer was returning this exception, because the portal prefernce value was empty!
The dev guys looked at the JBoss code and found that this exception is thrown when there wasn't at least on value for the preference.
Regards,
Jonathan

Similar Messages

Error while Refreshing provider when tried to view the portlet on portalpag

Hi All,
We have developed an oracle PDK portlet in jdeveloper 10g. The name of the application is ChngPasswd. This
application is deployed on OAS 10.1.3.1.0. The deployment was successful. Now,
I tried to register the web provider which was deployed on OAS 10.1.3.1.0 in
OracleAS portal. The registration was successful and I was able to view the
portlet.
These portlets can be protected in oracle portal by granting access to particular users, which also works fine.
But, the application that is deployed on 10.1.3.1.0 can be accessed by anyone. This should not happen. So, I
tried to protect the application deployed on 10.1.3.1.0 using the following
syntax applied in mod_osso.conf file:
<Location /ChngPasswd>
require valid-user
AuthType Basic
</Location>
With this whenever I tried to access the application page directly, the SSO login page appeared. After I
provide my credentials it goes to portlet test page.
But, with this configuration, when I go and refresh the provider or try to view the portlet on
the portal page, it gives an error. The error is as follows:
Error
Internal error (WWC-00006)
An error occurred while trying to refresh the provider. (WWC-43190)
An unexpected error occurred: User-Defined Exception (WWC-43000)
An unexpected error occurred: User-Defined Exception (WWC-43000)
The provider URL specified may be wrong or the provider is not running. (WWC-43176)
With this I am able to protect the application but the portlets doesnt work.
Now, I tried to remove the location tag from mod_osso.conf file of OAS 10.1.3.1.0 and tried
refreshing the provider. This works fine.
I hope this gives you a clear understanding of the problem.
pls Suggest what needs to be done.
Thanks and Regards,
Syed.

Hi Syed,
There could be multiple reasons for it.
1. First run the utlrp.sql utility and then try your system. Sometimes, even the presence of invalid objects cause a similar error stack in a similar system too.
- Login to SQLPlus as the sys user.
- sql>@db_oracle_home/rdbms/admin/utlrp.sql
2. You might also wanna see the following notes on Metalink. The issue seems similar as well as the error stack. The OAS is different but then in my experience, the cause of the problem often stays the same or gives a better clue to attack it. Also, you wont find as much stuff for any recent release as you would get for an older one.
Doc ID:      415856.1
Doc ID:      330855.1
Doc ID:      266320.1
Doc ID:      307379.1
hope that helps!
AMN

Invisible windows appears when trying to open a new window. These windows are listed in the Window list, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.

I cannot open a new window for FireFox.
Invisible windows appears when trying to open a new window. These windows are listed in the Window list on the menu, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.
The Downloads Window cannot be accessed either.
This is very annoying. Is this a bug? Or is there a fix.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

ClassCastExceptions when trying to view documents from a custom document provider

I have a very basic extension of DefaultDocument that I am using as
our document representation. In the recommended strategy #3 we are
told that we need to have something that extends DocumentDef, which
this fits. However, in the deployment descriptor by default
DocumentImpl is specified. Can anyone explain to me the relationship
between DocumentImpl and DocumentDef? When trying to view documents I
get a class cast exception which also occurs if I retrofit my document
provider to use DefaultDocument instead of my custom Document. It
appears to me this is happening for a good reason... DocumentImpl is
not related to DocumentDef or at least at the very minimum DocumentDef
is not an extension or implementation of DocumentImpl.
Any help is much appreciated,
Erik

In case someone else actually reads this, it was an id10t error on my part.
[email protected] (Erik Schalburg) wrote in message news:<[email protected]>...
I have a very basic extension of DefaultDocument that I am using as
our document representation. In the recommended strategy #3 we are
told that we need to have something that extends DocumentDef, which
this fits. However, in the deployment descriptor by default
DocumentImpl is specified. Can anyone explain to me the relationship
between DocumentImpl and DocumentDef? When trying to view documents I
get a class cast exception which also occurs if I retrofit my document
provider to use DefaultDocument instead of my custom Document. It
appears to me this is happening for a good reason... DocumentImpl is
not related to DocumentDef or at least at the very minimum DocumentDef
is not an extension or implementation of DocumentImpl.
Any help is much appreciated,
Erik

Palm Desktop shuts down when trying to view calendar by month

I'm using a Palm TX with the latest edition of Desktop installed (I think that's 6.2). Everything is normal except, suddenly, I cannot view my calendar in monthly view. Daily, weekly and yearly all work fine. Desktop shuts down when trying to view in monthly view. I did a system restart, a Desktop reinstallation, a download of the latest version and installation of that version and, finally, uninstallment of the existing Desktop, download of the newest version and installation of that version. Nothing seems to enable me to view the calendar in monthly view. This is a spontaneous event. I've been running Desktop on a Vista Ultimate system since February without incident. I have no idea about how to solve this.
Thanks
Post relates to: Palm TX

Well, here's where we are now. It's a good thing that I have desktop on my office computer because when I tried a Hotsynch with my home desktop, Hotsynch wiped out all the data on my handheld and then hung up both the handheld and desktop in the middle of the Hotsynch. I'm going to overwrite the entire handheld with the office desktop file. As for the home setup, I'm thinking the only thing I can do now is uninstall Palm and wipe out the entire directory of files. Am I correct about this? Do I need to do a clean uninstall?
Post relates to: Palm TX

ERROR (0×0107, 0×0000) WHEN TRYING TO VIEW A VM CONSOLE

Hi,
Getting error (0×0107, 0×0000) when trying to view vm console via vmm installed on a machine registered to different domain.
When tried to connect to the VM it will be asked to authenticate against the host and then we will see a warning about an un trusted certificate
and once we click OK we will receive the (0×0107, 0×0000) message.
Tried importing certificate of the hosts to the Trusted Root still seeing the same error. Can anyone please help?

Hi sathish777,
Because each domain has its secure boundary ,domain trust is needed for comunication between different domain .
As a workaround , you may try to logon the "client" locally to be a workgroup machine then use hvremote.swf to manage the hyper-v server remotely :
https://code.msdn.microsoft.com/Hyper-V-Remote-Management-26d127c6
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Database error when trying to view Crystal Report from InfoView

I am receiving the following error when I try to view or run a Crystal Report from the InfoView. The report is based on an SAP InfoSet.
"Failed to load database information."
The report data can be refreshed with no trouble from within the Crystal Reports designer on my local machine, but the error occurs after it is published to the InfoView. The same error appears when trying to import into Excel using LiveOffice.
Server details:
-Edge 3.1
-Windows 2003 64-bit
-SAP Integration kit installed
Local Crystal Reports machine details:
-Windows XP
-SAP Integration kit installed
-Crystal Reports 2008
My steps to troubleshoot so far:
-Checked Database Logon details in CMC for the report. Username and password are entered correctly.
-Cycled all CrystalReports background services off and on again from the CMC
-Rebooted server
Have I missed anything? Any help would be appreciated.

Hi,
do you have any connectivity from your EDGE to the SAP System ? Like can you import roles or run a WebI ?
Regards
-Seb.

Popup when trying to view documents with thumbnails

Is there any standard method to avoid the popup in EasyDMS when trying to view a document with a thumbnail attached? When you double click the document to view it, a pop up appears asking you which file you want to view.

This should not come. Have you configured thumbnails properly.Please check following.
Do you have type THU in DC30 trxn?
Is this type have values in "FileFormat" column with the mime types you use ?
eg:-
.jpg,.jpeg,.tif,.bmp,*.ppt
Is the field * MIME TYPE* has value image/jpeg ?

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Error message appears when trying to start server in VM Manager

Error message appears when trying to start server in VM Manager
OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
When trying to restart server:
OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

When trying to view a pdf from IE10 I get a small square with an X and not the document.

When trying to view a pdf from IE10 I get a small square with an X and not the document. I have removed reader completely from the control panel and reinstalled version 11.0.4. I have IE 10 10.0.9200.16721. Need assitance in getting Reader XI setup.

Hi,
We have heard few users having similar issue as yours and found out the problem for one of the users is this: http://support.microsoft.com/kb/2716529 .
I was able to reporduce this problem(square with a 'X') by changing the TabProcGrowth registry entry to 0.
This tool provided by Microsoft is for Win 8, to run this on Win 7 you can manually change the registry setting : please see " Let me fix it myself" in above url.
Before running these steps please make sure yours indeed is the same problem.
Please be very careful as some registry settings (not this one) can create serious problems on a Windows system including causing it to no longer boo
Let me know how it goes.
Thank You.

Cannot connect to iTunes message appears when trying to access the updates section of the AppStore? How can I fix?

Cannot connect to iTunes message appears when trying to access the updates section of the AppStore? How can I fix?

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

The "info" button does not appear when trying to sync in iTunes.

The "info" button does not appear when trying to sync in iTunes. It used to, but no longer does. Anybody?

Sync Services (which iTunes uses for the Info button) was removed in Mavericks.
Sync Contacts & Calendars via iCloud.
-> http://support.apple.com/kb/PH12117?viewlocale=en_US&locale=en_US

HT201272 cannot dowload message appears when tried to download tv episode from iCloud

trying to download tv episodes to device but 'cannot download' message appears when tried to. what can I do?

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

Error when trying to view vids on Facebook on Revolution- Have to force close

Have to force close when trying to view a video on Facebook that was posted with phone. Youtube vids work great it's just not working with ones that were posted by phones and it has worked since I got the phone about a month ago

DionM_VZW wrote:
bulldog69 wrote:
Have to force close when trying to view a video on Facebook that was posted with phone. Youtube vids work great it's just not working with ones that were posted by phones and it has worked since I got the phone about a month ago
Hello bulldog69! So, these videos you're trying to watch. Were they posted using your phone or someone else's phone? Are the videos viewable using a desktop/laptop computer?
The videos are posted on Facebook that someone else posted from phone and my own. It is friends videos which always worked on Fascinate and vids work great on computer. I think a few days ago was able to view one and today same thing have to click force close and even tried using our wifi and same problem. Pulled battery and restarted no luck. So far vids on YouTube work great on Revolution

Exception appearing when trying to view remote portlet preferences

Similar Messages

Maybe you are looking for