TimeCapsule with PC's Connected

Anyone know why PC’s connected to a TimeCapsule don’t come up in the Mac Finder, under the Shared category?
The only way I can get them to come up is to change the Workgroup name to something else and reboot the PC’s
Doesn’t happen when the PC’s are plugged into a normal router.

Have you set the workgroup in your Time Capsule's File Sharing section? Go into AirPort Utility, Manual Setup, Disks > File Sharing and enter your workgroup name. Also, be sure to enable file sharing on the PCs connected to your Time Capsule. All PCs connected to my TC network show up automatically under the Shared category in Finder.

Similar Messages

I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station??

I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station so that I can use my iPad?
THanks for your help!

for #1
Frequently asked questions about Apple ID - Apple Support
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
for #2
Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy

Problem with MacBook and TimeCapsule (with Workaround)

Hi,
thought it might be helpful to post my recent experience with my new MacBook (2,4GHz) and my *Time Capsule*.
I am using the Time Capsule as my main WLAN router and for backup. Reproducible, the MacBook (with OSX 10.5.6, all Airport updates applied; TimeCapsule with most recent firmware update 4.7.1) corrupts the TimeCapsule connection when waking up from sleep. Whenever the MacBook wakes up from sleep, it tries to (re-) connect to my wireless network. The airport sign in the menu bar changes from light grey bars to dark bars and the connection time counter appears next to it; but just a second later the counter disappears again, although the Airport signal bars are staying black. The result is that there's no wireless connectivity anymore; even the Airport admin software cannot find the TimeCapsule anymore. Furthermore, all other Macs (I have an additional iMac) loose there connections as well. Only thing that helps here is to restart the TimeCapsule (by disconnecting the power cord). After that, both MacBook and iMac can access the TimeCapsule again and everything works as normal.
This whole scenario can completely be reproduced and only happens when the MacBook tries to (re-) establish its Internet connection after wake-up from sleep. When I shut down the MacBook and boot normally, the MacBook connects without any problems.
After several hours of finding a solution, I've called Apple Support - and they told me that this is a *known bug*, but they currently have *no solution* for it. According to the Apple Support guy, I was not the first to report this problem (which was somehow a relief, but on the other hand a surprise as I haven't found similar problem descriptions on Mac forums yet), but they couldn't tell when and how the problem will be fixed. (Of course, they also recommended applying the most recent software updates (which I had) and resetting PRAM (which I did) - without any success.)
As now I got the impression that this is a bug with the current Late 2008 MacBook (it has a Broadcom BCM43xx based Airport Extreme Card) which I cannot solve myself, I looked at least for a workaround. I realised that this error doesn't occur when I turn Airport off before sending the MacBook to sleep, and activating it some safe time after waking up again. With the great resources at macosxhints.com, I found a small program called "Sleepwatcher" and a scripting addition called "XNetwork". Sleepwatcher runs as a demon in the background and can execute small tasks before a Mac goes to sleep and after it wakes up. XNetwork allows you to turn on and off Airport from within AppleScript (or the OpenScript Architecture). Now I use Sleepwatcher to turn off Airport just before my MacBook goes to sleep, and use it as well to (re-) activate Airport with a safe delay of 10 seconds after my MacBook wakes up again.
As of now, this works just fine (and as it should right out of the box...) - so I can wait more relaxed until Apple comes up with a real solution for this problem!
Sorry, this has become quite a long post - but maybe it is helpful for anyone.
Cheers,
Mark

I believe this was the problem I was experiencing at first, but it is now worse!
TC works fine EXCEPT for the AirPort feature when also using AirPort on my MacBook (late 2008, Unibody).
At first it seemed random, but I can now reproduce the problem at will. The TC stops working and the light goes solid amber or even no light at all sometimes.
The scenario is the following:
TC works fine, I have an iBook G4 connected via ethernet and can surf the web; iPod touch (1st gen) can surf the web as well; everyone's happy. Turn on the MacBook with AirPort on, TC stops working; light goes amber or sometimes stays solid green (I configured it to flash on activity) or completely off. iBook and iPod can't surf the web. AirPort Utility does not even see the TC (hit Rescan many times, no luck). Restart TC by unplugging, waiting 20 seconds or so, plug it back, light is solid amber; AirPort Utility still does not see the TC. Repeat this a few times, waiting in between, no success. Turn off AirPort on the MacBook, unplug and plug the TC, it is now working in less than 30 seconds. iBook and iPod can surf the web; connect the MacBook via ethernet to the TC, everyone is still happy. Turn on AirPort on the MacBook, TC stops working. You get the picture. It has been 2 days now where I can reproduce this constantly.
I have an AirPort Express that I use to stream music, which extends the TC. My DSL modem/router is in bridge mode where the TC connects via PPPoE. My configuration has been the same for almost 2 years problem free. I reset the modem too but the above scenario still applies.
I did a hard reset of the TC by holding the reset button at the back until the light flashed amber rapidly. I re-entered all the configuration again, but still no luck.
I re-installed OS X 10.5.7, no luck. The firmware on the TC is 7.4.1 (74100.25). The AirPort card on the MacBook is listed as Broadcom BCM43xx 1.0 (5.10.38.35)
I set the log level to debug on the time capsule and entered the IP address of the iBook (which is connected via ethernet), but I could not find anything in the system.log or other logs via the Console application.
When the TC is working and I then turn on AirPort on the MacBook, this is the last entries from the logs on the TC:
Jun 11 20:20:12 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +1 seconds).
Jun 11 20:20:13 Severity:5 Connection accepted from [fe80::20a:95ff:fea9:9426%bridge0]:60705.
Jun 11 20:20:14 Severity:5 Connection accepted from [fe80::20a:95ff:fea9:9426%bridge0]:60706.
Jun 11 20:29:01 Severity:5 Associated with station 00:23:6c:80:47:60
Jun 11 20:29:01 Severity:5 Installed unicast CCMP key for supplicant 00:23:6c:80:47:60
Jun 11 20:29:02 Severity:7 Public address reported as 67.55.21.207 to 192.168.1.16:5353
Jun 11 20:29:02 Severity:5 Binding added for udp, 67.55.21.207:32770 to 192.168.1.16:4500 with lifetime 3600
Jun 11 20:29:02 Severity:5 Binding added for udp, 67.55.21.207:32771 to 192.168.1.16:5353 with lifetime 3600
(Severity 5 is 'Notice', 7 is 'Debug')
I turned on AirPort on the MacBook at 20:29 and then nothing after those few lines; in this last case, the TC light was solid green but the iBook or iPod could not surf the web (it was flashing green with activity just before as I opened a web page on the iBook).
Still no solutions as of yet...

Timecapsule kills internet/wifi connection, when starting backup?

Everytime my timecapsule start backing up, my wifi/internet connection is killed?
I still see my airport in the top bar wifi logo, but no internet connection
I have to restart timecapsule before i get my internet back
Im on a imac 27" fully upgraded with OSX Lion
Anyone?

Unless you're backing up more than one device, a Time Capsule is a rather expensive Time Machine device.
That display shows that you're connecting over the 2.4 GHz band, which tends to be slower with an ideal connection, but tends to hold up better over distance and through interferences such as walls.
Is there any way you could connect your iMac to the Time Capsule with an Ethernet cable, at least long enough to run a test of a Time Machine backup. Before you run such a test, be sure that there's an Ethernet connection item in the list in the Network panel of System Preferences. To assure that you're using the Ethernet connection, you might also want to turn off the iMac's Wi-Fi feature.
Still another option might be PowerLine equipment. For less than the cost of an AirPort Extreme you could have near-Ethernet speeds without the need for a cable.

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Email account. What is causing this and what do we need to do to resolve it?

On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.

Contact whomever supports the email account and get the correct Outgoing email server settings from them.

Problems with n97 apps connecting to network (Voda...

Problems with n97 apps connecting to network (Vodafone UK – 3G)
Recently a number of my apps which used to connect automatically to the internet (which ever was available – known wi-fi or 3g) have stopped doing this. They now only connect to one known wi-fi.
I’ve tried uninstalling and reinstalling each app, but this hasn’t solved the problem. I’ve checked for software updates and do not believe any have been applied or are available. All apps have been downloaded via Ovi on the phone. I still am able to access the internet by the web browser which was installed on the phone and via google maps (which also still manages GPS position, search, etc).
The apps which I notice causing a problem are:
Sainsbury’s/nectar
Tesco
Map my tracks
Snaptu
Opera Mini
Any one got any ideas???

I have the same problem since i updated my mac to 10.5.6.
Each time I have to do a diagnostic and retype the WEP password to have the internet connection.

I have a wireless home phone connect device. Can call out on it when dial tone present, but most times cannot receive calls since purchase. Anyone else having a problem with their home connect device?

Have had Wireless Home Phone connect device refreshed and updated three times since I purchased it in September 2014. Last tech I worked with on it initialized an NRB to check the network. I checked the location of the tower, which is less than one mile up the hill with clear line of site. The device always has two antennas on it. The device is great when it does work, but most of the time it rings three times and then jumps to an automated message saying the person I am calling is not available. I've actually gone up there several times to try an fix the device, but always end up calling a Verizon tech who has me unplug it, pull the battery, and they do some network stuff and then we turn it back on and it works. After the last time on 10/02/14, I called it and got the message. I drove up there, 100 miles one way, and called it while standing in the room. Got the same message. I picked up the phone, heard a dial tone and dialed my phone and it range through. I hung that phone connected to the device and call it using my cell phone. It rang through. I went home and tried to call it the next day. Again it did not ring through and I got the message after three rings. I call another phone at the facility and had them call me on my mom's phone and it is fixed it again. The fix last for a day or two and then it's broken again, like it is today. If it's a network problem then it must be fairly close to the area because no matter what we do it fails again. So much for the 99.98% reliable. This thing is a piece of junk!
I purchased this device and put it on my plan so that my mother who we placed in a home at 96 years old would have a phone connection that she could use and wouldn't flip her out. My family and her family has not been able to faithfully connect with her at this critical time in her life. I am giving Verizon 10 more days to figure this out and then I am going to ask for a total refund not to mention how much time and travel I have put into this piece of junk. Either the home connect transceiver is broken or the network is broken. Why should I pay close to $70 for a service that has not worked more than several days out of 35 days? Also I have spent close to three hours on the phone with decent technical people, but it's my time. I should send Verizon a bill for every time I have gone up there to fix this device as well.
What perplexes me is that a regular cell phone would have sufficed, but because Verizon has to have a data connection that is not available on a regular phone and it was going to cost me $30/month, I decided to go with the home connect. Seemed like a nice solution for an older person who would have a hard time using a cell phone and keeping it charged. Plus after all the fees for getting it connected, it only cost $20/month. That would be a pretty good thing, IF IT WORKED....... The other thing that irks me is, why do I have to pay for a data connection when the cell phone Verizon originally provided can't even access the network. What ever happened to adding a phone line for $10 bucks\ month? All I wanted was a simple phone. She would not be able to use anything more complex and all she needs is a phone line period.
I have no problem paying for something that works and does what it should, but this is ridiculousness. The MTF on this device is somewhere around 1 to 2 days. Out of 365 days that's about a 96.5% failure rate....... Want my advice? Get ride of this device. It sucks and it's bad marketing.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Need help with thinkvantage access connection

Here a log file with new access connection:
Connection status:  Disconnected
Cause:  Driver disconnected while associating.
Error code:  229378
Recommended actions:
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name  11a/b/g Wireless LAN Mini PCI Express Adapter
Adapter type  Wireless LAN
Adapter speed  54.0 Mbps
Driver/Firmware version  7.6.0.96/ N/A
Adapter status  Enabled
Connection Status  Disconnected
Disable unused cards?  Yes
TCP/IP Settings
DHCP enabled?  Yes
Append parent suffixes of the primary DNS suffix?  Yes
Register connection's DNS suffix in registration?  Yes
Register connection's DNS suffix in DNS registration?  Yes
Enable LMHOSTS Lookup?  No
NetBIOS setting  "Default"
Wireless Settings
Network name (SSID)  linksys
Connection type  Access point
Wireless mode  Auto
Security encryption  None
System Information
System model  7732CTO
BIOS version  7LETB7WW (2.17 )
Operating system version  Windows Vista, Service pack 2
Access connections version  5.31
Access Point scan list
Network name (SSID)              Wireless mode MAC address                   Signal strength Channel
linksys                          802.11g        00:1C:10:54:65:B6              24%            11
Global Settings
Network
Allow all users of this system to switch to any existing location profile  -> No
Allow the wireless LAN radio to be turned off when inactive  -> No
Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
Enable autodeletion of unused profiles  -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray  -> No
Show wireless status icon in task tray  -> No
Display the progress indicator window when a profile is being applied  -> Yes
Preferences
Enable sound effects  -> Yes
Do not show balloon tips from the Access Connections system tray icon  -> Yes
Show WiMAX page as default on Main GUI  -> No
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> Yes
When no other connections are available, connect through Wireless WAN or WiMAX  -> No
Wireless priority list
Selection    Priority     Location profile name                                            Connection order                 Connection details
No                  1     linksys                                                          Wireless LAN                     SSID: linksys
Log File
Debug Log is enabled
It didn't happen when I use old version. Can anybody help me?

Are you getting any error message while connecting to ds..?
Are you able to go online on wired computer...?
Are you able to go online on any wireless computer on your network..?
Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now,check.

TS3274 its almost 10 months,i purchased ipad2 32 3g wifi.itinially i got problem with applications shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs freq

its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.

If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

Since i have updated my iphone everytime i open an app it comes up with a message 'connect to itunes to use push notifications, may include alerts, sounds and icon badges, i have backed up my phone on itunes and restored phone but its still doing it, :(

since i have updated my iphone everytime i open an app it comes up with a message 'connect to itunes to use push notifications, may include alerts, sounds and icon badges, i have backed up my phone on itunes and restored phone but its still doing it can anyone help?
Em

Return the iPhone and get your money back. It has been
hacked/modified/jailbroken and likely cannot be made
operative.

I have an old external drive with a firewall connection-How do I use this on my Mac with it's USB3 ports?

I have an old external drive with a firewall connection-How do I use this on my Mac with it's USB3 ports?

Does your Mac have ThunderBolt ports?
There are ThunderBolt to FireWire adapters.
As far as I know there are no FireWire to USB 3 adapters.
Allan

I already have an Apple ID account with 4 devices connected to it but I would like to make a new one with a desperate password for my school iPad. How do I do that?

I already have an Apple ID account with 4 devices connected to it but I would like to make a new one with a desperate password for my school iPad. How do I do that?

You can create a new Apple ID and password for the iPad but none of the content downloaded using the Apple ID associated with the four devices will be available on the iPad.
Create new > Apple - My Apple ID
It's not possible to use two passwords with one Apple ID.

TimeCapsule with PC's Connected

Similar Messages

Maybe you are looking for