''Exception EArgumentExcelption in Module Skype.ex...

Hey,
Since a couple of hours I'm unable to start Skype. I'm not able to get into the program at all because when I click on the pictogram it says: ''Exception EArgumentExcelption in Module Skype.exe at 000578A8. Invalid charachters in path''
I have been searching on this site but couldn't really find any usefull information, so I decided to open up a new topic.
Is there anyone who could help me solve this problem? I've tried installing Skype again, with deleting all the files.

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Similar Messages

Exception EOlesysERROR in module Skype.exe @ 00129...

Skype ran with no problems prior to the latest update. Computer is Dell Latitude laptop running Win 7 Ultimate SP 1 64-bit.
First Install
1. Logged in to local admin account.
2. Disabled malwarebytes realtime protection.
3. Got a fresh download from Skype site for Save and Run.
4. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
5. Visited Skype site and reviewed Skype Community.
6. I tried to get the 6.14.0.14.msi download per the Community, but the link had been disabled.
7. Retried install in Safe mode with No Networking . Got Exception EOlesysERROR in module Skype.exe @ 00129D69.
Second Install
1. Restarted the laptop and logged into local admin account.
2. Uninstalled Skype 6.21 and Skype Click to Call.
3. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
4. Got a fresh download from Skype site for Save and Run.
5. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
6. Changed permissions on Skype icon and Skype.exe to give “everyone” full control.
7. Skype would not run.
Third Install
1. Uninstalled Skype 6.21 and Skype Click to Call.
2. Found an earlier version 6.18 of Skype in the C:\users\localadmin\downloads folder.
3. Ran SkypeSetup.msi for version6.18. After completing some of the install, got Access Denied error.
4. Uninstalled Skype 6.18.
5. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
6. First Search: Deleted all Skype Folders by using the Windows Search utility while logged into local admin
account. It found about 40 items.
7. Second Search: Ran the Windows Search utility again and found 8 items.
8. Ran TweakNow Power Pack 2011 to clean registry of Skype items. Ran it again to clean tracking items for Skype.
9. Retarted the laptop.
10. Third Search: Ran the Windows Search utility again and it was clean.
11. Logged in as the standard user.
12. Fourth Search: Ran the Windows Search utility again and it found 7 Skype items.
13. Ran TweakNow Power Pack 2011 to clean registry of Skype items. It found some Skype items for the standard user.
Ran it again to clean tracking items for Skype.
14. Logged out of standard user and logged in as local admin.
15. Ran dxdiag.exe per reference in the Community. No problems were found in either in 32- and 64-bit modes.
16. Could not delete the Skype Icon in the Recycle bin as it was being held by $R03LAFF.exe.
Fourth Install
1. Logged in to local admin account.
2. Got Skype 6.21.32 from CNET’s download.com and Saved to download folder.
3. Disabled Wi Fi connection, antivirus and malwarebytes.
8. Ran Skype Setup. Got Exception EOlesysERROR in module Skype.exe @ 00129D69. Also got Access Denied when trying to
run the executable.
4. Admitted defeat to myself and to the standard user of the laptop.

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

EGDIerror in module skype.exe at 01A3FFA7

I get this when i was typing: exception EGDIerror in module skype.exe at 01A3FFA7. out of system resources. What do i do?

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

How to raise the exception in function module

Dear abaper's.
I am creating a Function module .In that in' EXCEPTION' Tab i am giving
3 exception .1.NO_DATA_FOUND 2.NO_PRINTER_FOUND 3.SMARTFORM_INTERFACE_NOT_FOUND.
In my coding if this condtion matches i want to raise this exception.how can i do this in my coding .can any one suggest me..
advance thanks,
Warm regards,
Veera

Hi,
if that condition is not satisfied,and u didn't handle that exception while calling function module then in the runtime error u will get the text as the description of the exception in function module definition.
rgds,
bharat.

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

Exception in Function Module

Hi,
How to use exception in Function module ?
How Can I use the exception my program while calling the Function Module ?
Can anyone explain with example ?
Thanks
NK

HI,
if something happens in ur FM and u want it to be tracked in ur calling program, then u can use exception...............
If u r having(say) 3 exceptions in ur FM....
and in ur calling program its like below.
EXCEPTIONS
exception1 = 1
exception2 = 2
exception3 = 3
then if the first exception is raised in ur FM,then sy-subrc value ll be 1( exception1 = 1 )....llly if the second exception is raised in ur FM,then sy-subrc value ll be 2( exception2 = 2 ).........
now u can use this sy-subrc values like below....
If sy-subrc = '1'.
message 'First exception is raised' type 'I'.
else.
message '2nd or 3rd exception is raised' type 'I'.
endif.
Cheers,
jose.

Exceptions in function module.... for beginner......

Dear all experts,
I am new to ABAP.
Can anybody please tell, how to use the exceptions in function module ?
and if any exception happens, then how to link some messages to that exceptions?
I will also like to know, how to create those messages ?
<b>Can anybody please illustrate with help of example, so that a beginner will be able to understand. ?</b>
<b>eg,</b> i am adding two numbers in function module, and if any one passing number is negative, then i need to raise exception with message please do not enter -ve numbers for addition.
your help will be surely, rewarded with points.
waiting for reply.
Regards & Thanks
Vinay.

hi..
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE <except>.
and
MESSAGE..... RAISING <except>.
The effect of these statements depends on whether the calling program handles the exception or not. If the name <except> of the exception or OTHERS occurs in the EXCEPTIONS addition of the CALL FUNCTION statement, the exception is handled by the calling program.
If the calling program does not handle the exception
The RAISE statement terminates the program and switches to debugging mode.
The MESSAGE ..... RAISING statement display the specified message. How the processing continues depends on the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE ..... RAISING statement does not display a message. Instead, it fills the system fields SY-MSGID, SY-MSGTY, SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION READ_SPFLI_INTO_TABLE.
""Local interface:
*"       IMPORTING
*"             VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*"       EXPORTING
*"             VALUE(ITAB) TYPE SPFLI_TAB
*"       EXCEPTIONS
*"              NOT_FOUND
SELECT * FROM SPFLI INTO TABLE ITAB WHERE CARRID = ID.
IF SY-SUBRC NE 0.
    MESSAGE E007(AT) RAISING NOT_FOUND.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table SPFLI_TAB. If it cannot find any entries, the exception NOT_FOUND is triggered using MESSAGE...RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Also check these links
http://help.sap.com/search/highlightContent.jsp
http://help.sap.com/search/highlightContent.jsp
http://help.sap.com/search/highlightContent.jsp
regards,
veeresh

Exceptions in function module

Hi,
What are the exceptions in function module.
Thanks in advance

HI,
Exceptions are used to return the error which happens in function module to the calling program.
You can't show error messages directly from Function modules. So when there are some error occurs in function module it raises the desired exception. and this exception number is passed back to calling program. in this way calling program can trace out the error happens in function module.
REgards,

What is the Exceptions in function module

Hi,
wt is the exceptions in function module? can anyone tell me?
Thanks
swathi

Exception is the mechanism by which you can give the error messages back to the program.
Say for the REUSE_ALV_GRID_DISPLAY, we have so many exceptions. Every exception has some meaning. Say the exception PROGRAM_NOT_FOUND will be raised when you had passed wrong program name in the CALLBACK program.
PROGRAM_NOT_FOUND = 1...
If the exception was raised than this value will be set to the SY-SUBRC.
SO, by accessing SY-SUBRC, you can get to know which exception was raised.
Regards,
Naimesh Patel

Exception GIFException in module aviWUSB54GC.dll at 000252AF? Error When i Start Up windows

hi i get this message Exception GIFException in module aviWUSB54GC.dll at 000252AF. what does this mean and it really starting to get annoying. can anyone help me? i lost my cd when i was moving so i dont know what to do?. thanks.

Solution 1
Boot your system in Safe Mode by pressing on F8 repeatedly after the Startup beep, but before the Windows screen comes up.
While in Safe Mode, uninstall the adapter drivers in Device Manager.
Uninstall the application or utility from Add Remove programs.
Reboot as you normally would.
Reinstall only the drivers.
To re-install the Drivers insert the Linksys Setup CD into your CD-ROM drive, When the Welcome screen appears click Exit, connect your USB adapter now...When the Hardware Update Wizard window appears, click Install the software automatically (Recommended) then click Next.
NOTE: The Hardware Installation screen may appear indicating that the Adapter has not passed Windows Logo testing. Ignore the window and click Continue Anyway to proceed with the installation since the Adapter has been tested and found to work with Windows XP.When Windows has finished installing the driver, click Finish.
Click on Start and goto Control Panel and double click on Network Connections...Right click on Wireless Network Connection and select View Available Wireless Networks"- If you see your wireless network in the list, highlight it by 'single' clicking on it- Now click on the 'Connect' button below- If your wireless network is secured, it would ask you to provide the network key- Provide the wireless network key and confirm it again in the confirmation box and click Connect".It should work...
Solution 2
Download the driver appropriate for your device from here
After downloading the drivers you need to unzip the file...After you unzip the file you should un-install the adapter drivers/software from Programs menu...Leave the adapter connected to the PC and reboot your computer...Once the computer is rebooted you should see a message "Found new Hardware"...Select the option Install it from a specific location and click Next, then select Include this location in Search and browse to the place where you have unzipped all the files and select the Driver folder and click O.k...Then click Next and it should install the adapter drivers...
NOTE : This installation doesn't install the software(Linksys Monitor)...
Once the Adapter is installed, Click on the Start button >>> Control Panel >>> Network Connections- Right click on the "Wireless Network Connection" icon and select "View Available Wireless Networks"- If you see your wireless network in the list, highlight it by 'single' clicking on it- Now click on the 'Connect' button below- If your wireless network is secured, it would ask you to provide the network key- Provide the wireless network key and confirm it again in the confirmation box and click "Connect"...It should connect to your Network and Internet...

Raising exceptions in function module

I am writing a coding inside the userexit. The call customer function has 'exception' parameters like below:
         EXCEPTIONS
           IDOC_ERROR          = 1
           DO_NOT_PROCESS_IDOC = 2
           OTHERS              = 3.
Now, I want to raise the exception to '1' depending on some conditions. How do I do that? I used to just get the import parameters from the funciton module but never raised exceptiosn before.
please advice.
Thanks

Hi,
Please try this.
IF <your field check> NE <your condition>
RAISE IDOC_ERROR.
ENDIF.
OR
SY-SUBRC = '1'.
Regards,
Ferry Lianto

Incompatible with interface - Exception in Adapter Module

Hi Experts,
I have a custom adapter module deployed on PI 7.1. Once i post any message, i am getting below exception in CC monitoring.
Message processing failed. Cause: java.lang.ClassCastException: class $Proxy3125_10002:sap.com/ClearModule_EAR @ com.sap.engine.boot.loader.ResourceMultiParentClassLoader @ 6daa7537 @ alive incompatible with interface com.sap.aii.af.lib.mp.module.ModuleLocal:library:com.sap.aii.af.lib @ com.sap.engine.boot.loader.ResourceMultiParentClassLoader @ 15d75e80 @ alive
I used NWDS 7.1 to develop the module.
the EJB is stateless.
Can any one have any idea about the exception.
Please help me out here.
Thx in advance,
Brian

Hello,
i forgot to modify the four interfaces' name when i create the EJB, ie my Bean class is "ss.cod.de.EjdBean", then the "Remote Interface" & "Home Interface" are setted respectively and defaultly as "ss.cod.de.EjdRemote" & u201Css.cod.de.EjdHomeu201D, the u201CLocal Interfaceu201D & "LocalHome Interface" are the same to the two interface above.
everything was well while i rectified all the interfaces as "com.sap.aii.af.lib.mp.module.ModuleHome", "com.sap.aii.af.lib.mp.module.ModuleLocal", "com.sap.aii.af.lib.mp.module.ModuleLocalHome" and "com.sap.aii.af.lib.mp.module.ModuleRemote".
hope its help 4 u.
good luck.
thx & br,
Brian

What are the system built exceptions in function modules?

Hi Experts,
When we are creating the function module in se37 without exceptions ,but system will assign 2 default exceptions? what are the those exceptions? please provide the information on this issue.
Thanks,
Srinivas.

Hi,
The system raises exceptions
1) COMMUNICATION_FAILURE and
2) SYSTEM_FAILURE by default.
Regards,
Lokeswari.

Raise exception in function module call from SAP owned program

I need to raise an exception in a function module to terminate a transaction, display a error message and return to to previous selection screen so the user can fix the error before moving forward.......
How do you do this when the program using the function module is SAP owned?
Thank You!
Jeff

Hi,
After calling the function module, you can do something like this.
IF SY-SUBRC <> 0.
RAISE EXCEPTION.
ENDIF.
Regards,
Ferry Lianto

How to create EXCEPTION in function module

hi experts,
          how to create exeptions in function module i want step by step.
regards,
chaitu

hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
·         The RAISEstatement terminates the program and switches to debugging mode.
·         The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*"       IMPORTING
*"             VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*"       EXPORTING
*"             VALUE(ITAB) TYPE SPFLI_TAB
*"       EXCEPTIONS
*"              NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
    MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
      wa   LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
     EXPORTING
          id        = carrier
     IMPORTING
          itab      = jtab
     EXCEPTIONS
          not_found = 1
          OTHERS    = 2.
CASE sy-subrc.
WHEN 1.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
    MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Hope this is helps,Do reward.

''Exception EArgumentExcelption in Module Skype.ex...

Similar Messages

Maybe you are looking for