Exception in implementing badi " hrpad00inftydb"

Hi friends..
My need is to update infotype 0207 when ever employee changes address thru ess.
I implemented the badi 'HRPAD00INFTYDB' and inside it called 'HR_MAINTAIN_MASTERDATA'. But its giving the following two exception :
1. Exception 'CX_HRPA_VIOLATED_PRECONDITION' occured in the
procedure "INITIALISE_PS_ADAPTER'.
2. Exception named 'cx_sy_ref_is_initial' occured in the procedure 'HRXSS_PER_CLEANUP'.
I have checked the implementation by running it separately. It is working fine and is updating 0207.
Bt when i do the address change through portal, it is giving the above mentioned exceptions.
Please post a solution, if possible.
Thanks and Regards.
abhi

Hi...
thnx for d reply..
yes..tht i checked thoroughly..
and anyways i independently executed my implementation, it is working fine.
Thnks and Regards
Abhi

Similar Messages

Getting Exception when implementing badi 'hrpad00inftydb'

Hi friends..
My need is to update infotype 0207 when ever employee changes address thru ess.
I implemented the badi 'HRPAD00INFTYDB' and inside it called 'HR_MAINTAIN_MASTERDATA'. But its giving the following two exception :
1. Exception 'CX_HRPA_VIOLATED_PRECONDITION' occured in the
procedure "INITIALISE_PS_ADAPTER'.
2. Exception named 'cx_sy_ref_is_initial' occured in the procedure 'HRXSS_PER_CLEANUP'.
I have checked the implementation by running it separately. It is working fine and is updating 0207.
Bt when i do the address change through portal, it is giving the above mentioned exceptions.
Please post a solution, if possible.
Thanks and Regards.
abhi

encountering the same error
anybody has answer to these? why is the standard old FM for updating infotypes is not supported by this BADI?

BADI HRPAD00INFTYDB

Hello,
We want to raise an error message from the BADI HRPAD00INFTYDB.
Do anyone of you know how we can achieve this.
There is no parameter related to messages imported into the class interface.
when we raise the exception for the class, its not sending the required message.
Is there any way, we can update the common messages table so that the system will automatically handle afterwards.
Kind Regards,
Anil

We tried passing back the message filling in the message_tab. the problem we faced is, its showing a short dump from ESS when we pass an error message. We have used a different BADI PT_ABS_REQ to overcome this.
Thanks for your reply.
Anil

BAdI HRPAD00INFTYDB is not called

Hi there!
I encountered the problem that the BAdI HRPAD00INFTYDB is not called on any update of infotype 2002. The mentioned infotype is updated by the report RPTARQPOST, after this update I want to have some code executed in th method UPDATE_DB. We are using ERP2005 an EP7.
In addition I implemented my code in BAdI HRPAD00INFTY, too. But this one is not called either.
Maybe somebody could tell me if one of the BAdI are called at all!?
Thanks and best regards,
Michael

Hi,
Have u activated your BADI?
Go to se19 n create implementation for the concerned badi there.
Click on the method in which u want to add ur code..save code and check it.
Go back and then activate the BADI.
Regards,
Manoj.

Problem on Implementing badi ME_GUI_PO_CUST

Hi Expert,
I have implement BADI ME_GUI_PO_CUST, to add the new tab.
I have managed to View the tab in Both ME21N, and ME22N with implement SUBSCRIBE and MAP_DYNPRO_FIELDS.
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE
DATA: ls_subscriber LIKE LINE OF re_subscribers.
CHECK im_application = 'PO'.
CHECK im_element = 'ITEM'.
CLEAR re_subscribers[].
ls_subscriber-name = subscreen1.
ls_subscriber-dynpro = '0002'.
ls_subscriber-program = 'ZRPP_ME_GUI_PO_CUST_SCREEN'.
ls_subscriber-struct_name = 'CI_EKPODB'.
ls_subscriber-label = text-001.
ls_subscriber-position = 7.
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
METHOD : IF_EX_ME_GUI_PO_CUST~MAP_DYNPRO_FIELDS
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
LOOP AT ch_mapping ASSIGNING <mapping>.
 CASE <mapping>-fieldname.
 WHEN 'ZCNUM'. <mapping>-metafield = mmmfd_cust_01.
 ENDCASE.
ENDLOOP.
Method IF_EX_ME_GUI_PO_CUST~MAP_DYNPRO_FIELDS
DATA: lw_fieldselection LIKE LINE OF ch_fieldselection.
LOOP AT ch_fieldselection INTO lw_fieldselection.
 lw_fieldselection-fieldstatus = '+'.
 MODIFY ch_fieldselection FROM lw_fieldselection.
ENDLOOP.
I need to store the value, and some of thread said it required methods:
TRANSPORT_FROM_MODEL
TRANSPORT_TO_DYNP
TRANSPORT_FROM_DYNP
TRANSPORT_TO_MODEL
I have click on the subcreen, or enter at the field, but it will not able to trigger the Above Methods.
How do I do for the to trigger above Methods? Or Should I added some additional code at screen program? I want SAVE the data actually into EKPO.
Thanks in advance.

Hi Sim,
Recently we have the same reqirement.
You can have a look at the below code..
First method: SUBSCRIBE
DATA: ls_subscriber LIKE LINE OF re_subscribers.* we want to add a customer subscreen on the Header tab
 CHECK im_application = 'PO'.
 CHECK im_element = 'HEADER'.* each line in re_subscribers generates a subscreen. We add one subscreen in this example
 CLEAR re_subscribers[].
* the name is a unique identifier for the subscreen and defined in this class definition
 ls_subscriber-name = subscreen1.
* the dynpro number to use
 ls_subscriber-dynpro = '0001'.
* the program where the dynpro can be found
 ls_subscriber-program = 'SAPLZKMMM_KAU86037'.
* each subscreen needs his own DDIC-Structure
 ls_subscriber-struct_name = 'CI_EKKODB'.
* a label can be defined
 ls_subscriber-label = text-001.
* the position within the tabstrib can be defined
 ls_subscriber-position = 13.
* the height of the screen can be defined here. Currently we suport two screen sizes:
* value <= 7 a sevel line subscreen
* value > 7 a 16 line subscreen
 ls_subscriber-height = 7. APPEND ls_subscriber TO re_subscribers.Here, parameter u2018im_elementu2019 is defined as u2018HEADERu2019 as we are adding new tab in header section of PO.
Define a function group and take the main program and define it in ls_subscriber-program.
Also define a sub screen with the required fields and assign it to the parameter ls_subscriber-dynpro.
Then method MAP_DYNPRO_FIELDS
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
 LOOP AT ch_mapping ASSIGNING <mapping>. CASE <mapping>-fieldname. WHEN 'ZZPAYMENT_AGRE'. <mapping>-metafield = mmmfd_cust_03.
 WHEN 'ZZPROJECT'. <mapping>-metafield = mmmfd_cust_04.
 ENDCASE. ENDLOOP. TRANSPORT_FROM_MODEL:
DATA: l_header TYPE REF TO if_purchase_order_mm,
 ls_mepoheader TYPE mepoheader,
 ls_customer TYPE CI_EKKODB.*--------------------------------------------------------------------*
* system asks to transport data from the business logic into the view
*--------------------------------------------------------------------* CASE im_name. WHEN subscreen1.* is it an Header? im_model can be header or item.
 mmpur_dynamic_cast l_header im_model.
 CHECK NOT l_header IS INITIAL.* transport standard fields
 ls_mepoheader = l_header->get_data( ).* store info for later use
 MOVE-CORRESPONDING ls_mepoheader TO dynp_data_pbo.
 WHEN OTHERS.
 ENDCASE. TRANSPORT_TO_DYNP:
Define a FM 'ZK_KAU86037_PUSH' to push the values.CASE im_name. WHEN subscreen1. CALL FUNCTION 'ZK_KAU86037_PUSH'
 EXPORTING
 im_dynp_data = dynp_data_pbo. WHEN OTHERS.
 ENDCASE. TRANSPORT_FROM_DYNP:
Define another FM 'ZK_KAU86037_POP'.CASE im_name. WHEN subscreen1. CALL FUNCTION 'ZK_KAU86037_POP'
 IMPORTING
 ex_dynp_data = dynp_data_pai. IF dynp_data_pai NE dynp_data_pbo.
* something has changed therefore we have to notify the framework
* to transport data to the model
 re_changed = mmpur_yes.
 ENDIF. WHEN OTHERS.
 ENDCASE. TRANSPORT_TO_MODEL:
 DATA: l_header TYPE REF TO if_purchase_order_mm,
 ls_mepoheader TYPE mepoheader,
 ls_customer TYPE CI_EKKODB,
 l_po_header_handle TYPE REF TO cl_po_header_handle_mm.*--------------------------------------------------------------------*
* data have to be transported to business logic
*--------------------------------------------------------------------* CASE im_name. WHEN subscreen1.* is it an item? im_model can be header or item.
 mmpur_dynamic_cast l_header im_model.
 CHECK NOT l_header IS INITIAL. ls_mepoheader = l_header->get_data( ).* standard fields changed?
 IF dynp_data_pbo-zzpayment_agre NE dynp_data_pai-zzpayment_agre
 OR dynp_data_pbo-zzproject NE dynp_data_pai-zzproject.* update standard fields
 ls_mepoheader-zzpayment_agre = dynp_data_pai-zzpayment_agre.
 ls_mepoheader-zzproject = dynp_data_pai-zzproject.
 CALL METHOD l_header->set_data
 EXPORTING
 im_data = ls_mepoheader.
 ENDIF.
 WHEN OTHERS. ENDCASE.
Then we have to implement one more BADI to display the tab and update the values.
Implement the BADI ME_PROCESS_PO_CUST. This cannot be used multiple times.
In this, we have methods (PROCESS_HEADER,PROCESS_ITEM).if we need to any validations for the fields we can write the logic here in this methods. In my case I need to check for the document type which I implemented in the method (PROCESS_HEADER).
Hope it helps you.
Thanks
Arbind

Need Ways to implement Badis in ECC 6.0 (Enhancement Points)

Hi experts,
I am new to BADIs. I've a requirement to find a BADI for changing Customer number while posting customer invoice in SAP (the data is coming from XI system in IDOC format). I want to know any BADIs or userexits are there for my requirement. At the same time I want to know how to implement a BADI in ECC 6.0 .Any docs releated to this topic will be of great help.
points will be awarded for sure..........

hi Poorna Chandras... ,
These steps should enable you to find any BADI related to any transaction in a matter of minutes.
Procedure 1:
1) Go to the transaction SE37 to find your function module.
2) Locate the function SXV_GET_CLIF_BY_NAME.
3) Put a breakpoint there.
4) Now open a new session.
5) Go to your transaction. 6) At that time, it will stop this function.
7) Double click on the function field EXIT_NAME.
8) That will give you name of the BADI that is provided in your transaction.
Business Add-Ins
Procedure 2:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
4) Now Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
SAP Business Add-Ins (BAdIs) are one of the most important technologies used to adapt SAP software to specific requirements. BAdIs were introduced with Release 4.6 and replace function module exits. This technology is not limited to SAP applications. BAdI calls can be integrated in customer applications. These can then be enhanced by other customer applications. In the various SAP applications, BAdI calls are implemented at places where enhancements are appropriate.Business add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, country-specific versions, industry solutions, partner, customer, and so on). You can create definitions and implementations of Business Add-Ins at any level of the system landscape.SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to differentiate between Add-In implementations using the filter Country or other criteria.
The enhancement technique is set up in such a way that it is possible to define interfaces for ABAP soure code, screens, GUI interfaces, and tables. These allow customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently. BADI/UserExists are used to enhance R/3 For customer Needs.
Actually there is no transaction to find when and where the BADI
is called.
1. You can see the BADI description to find why it is called.
2. Once you implemented and activated the BADI, put some break points
in the BADI and see "where else used" option to check in what all
programs this BADI is called. In the ITS debug, when you are doing
the operation what exactly the BADI description tells, it will take
to the break points and you have to do manually debug the whole thing.
I know its bit difficult to do manual debug the whole thing, it
takes lot of time, but you have to be very patience when you are
dealing with BADI's.
Transaction SE18 is the BADI equivalent of transaction SMOD
Transaction SE19 is the BADI equivalent of transaction CMOD .
To find the BADI to be implemented and then implement this via SE19.
Check this blogs 2 find a BADI:
How to find if we have a BADI in Transaction VB02
Re: BADI for screen enhancement in MM01 transaction
Re: BADI and User exits
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
You can check the links for Step by Step Badi Implemntation
(very helpful self learning docs).
BADI Step by Step Implementation.
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
New to Badi`s
New to BADI
New to BADI long question
Badi
/message/4866901#4866901 [original link is broken]
Hope this helps
Rewards if useful.........
Cheers
Kripa Rangachari.

Implementing BADI ALM_ME_001_ORDER

Hi All,
MAM30 SR1
MI25 SP15
I followed the guide for implementing BADI ALM_ME_001_ORDER to get more fields for the ORDER_OPERATION details.
In the MI server, merep_mon says my fields and values are there and enhancement flags, and so as in the device - if I look in start.jsp.
But they are nowhere to be found on the screen. What did I miss?
Here's what I did:
1) added fields in CI_ALM_ME_ORDER_OPERATION structure
2) implemented BADI method MAM30_GETDETAIL
METHOD if_ex_alm_me_001_order~mam30_getdetail .
DATA: l_oper TYPE mam_30_order_operation,
 lce_oper TYPE alm_me_custom_order_operation.
LOOP AT order_operation INTO l_oper.
 clear lce_oper.
 lce_oper-zusr00 = l_oper-usr00.
 lce_oper-zusr01 = l_oper-usr01.
 lce_oper-zusr02 = l_oper-usr02.
 lce_oper-zusr03 = l_oper-usr03.
 lce_oper-key_activity = l_oper-activity.
 lce_oper-key_sub_activity = l_oper-sub_activity.
 APPEND lce_oper TO ce_order_operation.
 l_oper-enhancement_flag = 'X'.
 MODIFY order_operation
 FROM l_oper TRANSPORTING enhancement_flag.
ENDLOOP.
ENDMETHOD.
3) implemented BADI method MAM30_GETLIST
METHOD if_ex_alm_me_001_order~mam30_getlist .
DATA l_order_list TYPE mam_30_order_header.
LOOP AT order_list INTO l_order_list.
 l_order_list-enhancement_flag = 'X'.
 MODIFY order_list
 FROM l_order_list TRANSPORTING enhancement_flag.
ENDLOOP.
ENDMETHOD.


Hi Kuya!
Did you activate your BADI implementation in SE19?
Thank You
Gisk

Implementing BADI TRIP_WEB_NUMBER, problem reading a field

Hi All,
Have anyone implemented BADI TRIP_WEB_NUMBER before,
Interface : IF_EX_TRIP_WEB_NUMBER
Method: USER_EXIT_NUMBER_INTERNAL
I need a help.
In this method i have exporting parameter NUMBER_RANGE TYPE INRI-NRRANGENR
so my requirement is just to change this parameter for particular conditon.
Problem is to make condition i need a field SCHEMA
You can check Structure HEAD_PERIO-SCHEM
or elset T706S OR T706T...
I need to read that field at runtime somehow, how can i achieve that pls help.
i can able to read only the date....
Pls help..
Thanks

Find out the main program name where the variable HEAD_PERIO-SCHEMA is declared. Then you can use the ABAP call stack method to retrieve the variable like below. This method can only be used to read a variable from ABAP call stack memory, that is the variable should be available in the scope of the program which is present in the run time call stack your BADI gets called in.
DATA: lv_name_xvbak(30) VALUE '(SAPMV45A)VBAK'.
FIELD-SYMBOLS: <xvbak> TYPE vbak.
* Retrieve Sales order details from abap stack
ASSIGN (lv_name_xvbak) TO <xvbak>.
IF sy-subrc NE 0.
EXIT.
ENDIF.
In the above code you can replace SAPMV45A with the main program name where field SCHEMA is available and VBAK with HEAD_PERIO (the structure or internal table where the field you want is available)
For accessing internal tables similarly
DATA: lv_name_xvbap(30) VALUE '(SAPMV45A)XVBAP[]'.
FIELD-SYMBOLS: <xvbap> TYPE TABLE OF vbap.
ASSIGN (lv_name_xvbap) TO <xvbap>.
IF sy-subrc NE 0.
EXIT.
ENDIF.

Implementing BADI for PO

Dear All,
In the PO creation badi, in create/change/save methods, i need to clear the purchase info record defaulted by SAP.
Also in create method, PO price needs to be defaulted as the same as PR price, if the reference PR is found. User should be able to change this default price and save the PO. Hence, I have to restrict this logic only to create method.
Now i am trying to implement BADI for PO def (ME_PROCESS_PO_CUST) with (impl name: ZMM_POCREATE). For clearing the purchase info record i put the code in 2 different methods
1. PROCESS_ITEM
DATA: ls_mepoitem TYPE mepoitem.
break LAKSHMIS.
Get the PO item Details
ls_mepoitem = im_item->get_data( ).
ls_mepoitem-INFNR = space.
Set the item data
CALL METHOD im_item->set_data
 EXPORTING
 im_data = ls_mepoitem.
2. OPEN
DATA:
ls_header TYPE mepoheader,
ls_mepoitem TYPE mepoitem.
break lakshmis.
CALL METHOD im_header->get_data
 RECEIVING
 re_data = ls_header.
Get the items for the PO using get items method and change the purch info record to SPACE and set the values using SET_DATA on item.
However, in both the cases the value doesnot get changed (as i dont see any changing parameters provided). However the documentation of BADI says that we can change the HEADER as well as ITEM information in this BADI.
Can anyone please suggest, where i am going wrong and what needs to be done in order to achieve the above two requirements.
Thanks in advance.
Regards,
Lakshmi

BADI
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps [original link is broken]:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Rewards if useful.........
Minal

Any one implemented BADI :BADI_LE_SHIPMENT

Hi all,
Is anyone has implemented BADI: BADI_LE_SHIPMENT.
I am trying to implement the method: AT_SAVE and i want to update: VTRLK.
please let me know how should i implement AT_SAVE Method.
Thanks.

goto ->se19->givee name to implementation(classical)--->there it will ask for BADI definition -> and give all required ffild values->after that double click on the method which u want to active ---> u will get method screen
like
method
code here
endmethod
and save and activate.
Regards
Peram

Can we implement BADI's in 4.6c version

Hi experts,
Can we implement BADI's in 4.6c version.
regds
venky

Hi,
Please check the following for BADI knowledge.
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Regards,
Ranjit Thakur.
Please Mark The Helpful Answer.

Implementing BADI

Hi,
How to implement BADI?
I want to Implement Badi for t.code FBL3N .
In This i need to update BSEG table.
please give me solution
Edited by: Santhosh on Jan 22, 2008 4:50 PM

Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD Page 40), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
Regards

Implementing BAdi HRHAP00_AUTHORITY

Good Afternoon Everyone,
I have the task of writing a functional specification to implement BAdi HRHAP00_AUTHORITY to prevent employeesfrom changing their appraisal ratings and from displaying their "In Process" appraisal documents. I have been told that this BAdi can be modified to include logic to handle these to business requirements. However, I am unsure how to write the functional specification for this BAdi.
Can someone let me know if 1) Implementing this BAdi will meet the business requirements identified, and 2) you have a functional specification for this BAdi I can use and modify.
Any suggestions or comments are welcomed.
Felicia

Hi,
Check this thread: Coulumn Access- Substatus
I advise you to use BADI HRHAP00_COL_ACCESS.
Read this guide in order to know the reason [http://nicx.co.uk/attachments/File/1%20Business_Add_Ins.pdf|http://nicx.co.uk/attachments/File/1%20Business_Add_Ins.pdf]
Hope this will clarify you.
Rewards points....

Implementing Badi: BADI_MAT_CUST_SCR

Hello Experts!
I'm trying to insert customer defined fields in material component in CJ20N. I'm implementing Badi: BADI_MAT_CUST_SCR.
Customer tab appeared. But next I have some problem: i need to extended 2 methods GET_SCREEN_DETAILS and GET_CUST_FEILDS. If someone extended this methods, please help me, i need simple example of realization this 2 methods.
Thank you.

Hi Ruslan,
Just go through this link.[Enhancement in PRj|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60ccc737-d6ea-2b10-32ad-e9020b000e43?QuickLink=index&overridelayout=true]
If need you can do through exit also.
Regards,
Madhu.

Implementing badi in /sapapo/ccr

Hi
The requirement is to implement badi /SAPAPO/CIF_DELTA3 for Filtering of objects not relevant for the comparison (RELEVANT_FOR_COMPARE_APO). When this report runs for purchase requisition, we see error code 182. We do not want to see the error code 182 appearing for those Product locations (PRs) that are deliberately stopped from moving to R3.We are maintaining a list of these Product location combinations in a custom table in APO. How this BADI will be implemented ?
Thanks
Manas

Hi,
CCR will try to compare transaction data of APO with ECC. Your developer needs to write the logic in BADI that for these product- location combination (mentioned in Z table) do not compare purchase requisitions.
At the same time you need to stop these purchased requisitions coming from APO to ECC in the userexit :CIFPUR01
EXIT_SAPLCPUR_001 (enhancement to change purchasing data (purchase requisitions, purchase orders) in ERP inbound)
Thanks,
Pavan Verma

Exception in implementing badi " hrpad00inftydb"

Similar Messages

Maybe you are looking for