Exception whiling sending the  message to XI..

Guys,
  Here is what we have:
We have a ICWC application, where in the agents enter some data about the customer. As soon as the agent saves the customer data,  a function module defined at the back end system  is called.
The function module at the back end system  does some addition processing and calls the  XI proxy by calling execute_synchronous method.
The message goes to CRM Queue and from there it does to the   XI system.
We want to simulate the exception during the  execute_synchronous method call.
How can we do it ?
ICWC --> save() --> FM1() --> XI_asynch_out-execute_synchronous()
Your response will be great !!.
We tried to disabling the CRM queues, did not work, We tried changing the RFC destination by having  wrong port number, did not work

not sure if this will work...but you can give try...
since it is a synchronous scenario...From XI do not send any response back to CRM system. CRM would be waiting for a synchronous response from XI and if the response does not reach within the timeout period the execute_synchronous will throw an timeout exception. If you are using BPM then you can introduce a wait step (wait time > HTTP timeout period)  before the BPM step which sends back the acknowledegment to CRM system.

Similar Messages

  • I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up und one account.

    I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up under one account.

    You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

  • Cannot send email via AOL on iPad2 - "A copy has been placed in your Outbox. Sending the message content to the server failed."

    My CEO has an ipad2 and I set it up w/ AOL.  She cannot send any email via her AOL account from her iPad.  She gets a message that says "A copy has been placed in your Outbox. Sending the message content to the server failed."   We've tried it on wifi and on 3G (Verizon version).  I've removed the account and added it, I've tried setting it up as an IMAP account vs. using Apples standard AOL mail setting and nothing seems to work.  The SMTP settings are smtp.aol.com, port 587.  I've tried adding an alternate server/smtp, but I haven't been able to find anything that works.  Any advice or other people having this issue?  It works fine sending an email from her aol web mail.  And unfortunately, having her sign up for a gmail account is not an option.  Thanks

    Interesting.  Firstly I have been on AOL since the early 90s with no current intention to switch as my primary personal email account.
    I have two email accounts on my iphone - AOL and my email from my business website.  I deleted both and then recreated first the business account and then the AOL account.  Same error.  Then I wasn't sure what you suggested but I turned off the AOL SMTP server and selected the business email SMTP server by turning it on with the same result.  I still get the error "A Copy has been placed in your Outbox.  Sending the mssage content to the server failed."
    Perhaps this problem will get fixed by IOS 6.   AOL will not talk to me unless I pay and Apple says its not their problem.  So for the time being I use the AOL web interface in the iPhone's Safari to send emails from the phone.

  • TS3899 Tried all the tips on line. Every time I try to send an e-mail, it gives me this message, "A copy has been placed in your Outbox. Sending the message content to the server failed" Any help in how to resolve would be appreciated

    I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
    Message is " A copy has been placed in your
                        Outbox. Sending the message content to the server failed."
    Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
    Address is fine etc.

    How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

  • HT4863 I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

    I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

    Try reentering the password in your iCloud mail settings.

  • How can I get TB in my Mac to ask me before sending the messages in Outbox?

    Something has changed and TB is now sending the messages I created to Send Later (which are in the Outbox) without asking me as soon as I re-connect to a network (i.e., it correctly stores it into the Outbox but if my laptop loses the network-- because for example I close it to go home -- as soon as it reconnects it sends all messages without asking me).
    I have a Mac and I cannot find the Advanced > Network & Disc Space settings that (https://support.mozilla.org/en-US/questions/1004514) indicates as the solution.
    Any help would be greatly appreciated.
    Thanks!

    ''mgba [[#question-1052447|said]]''
    <blockquote>
    Something has changed and TB is now sending the messages I created to Send Later (which are in the Outbox) without asking me as soon as I re-connect to a network (i.e., it correctly stores it into the Outbox but if my laptop loses the network-- because for example I close it to go home -- as soon as it reconnects it sends all messages without asking me).
    I have a Mac and I cannot find the Advanced > Network & Disc Space settings that (https://support.mozilla.org/en-US/questions/1004514) indicates as the solution.
    Any help would be greatly appreciated.
    Thanks!
    </blockquote>
    Thanks Matt, perfect!
    Cheers,Maria

  • Sending email error with Yahoo: "A copy has been placed in your Outbox. Sending the message content to the server failed."

    HELP!  Why am I getting this error message? It's driving me crazy! When I try to send an email,  the message stalls in the outbox and the following message pops up -  "A copy has been placed in your Outbox. Sending the message content to the server failed." I have deleted and reinstalled the account, restarted the phone, etc - what the heck? The emails work just fine at Yahoo online, so the account it fine...I don't want to hard reset the phone, as I had to do that recently and it's a pain - any suggestions?

    OR they are the right settings but you are trying to send through a different internet provider or 3G provider, that does not allow that SMTP server to send email.
    if I send email from 3g or someone elses wifi on a different ISP, it will not work, because it does not allow that server to be contacted. this is normal.
    What you want to do is setup a gmail account and use their SMTP server settings for the defauly outgoing server. that way you dont have to worry about this.

  • A copy has been placed in your outbox.  sending the message content to the server failed.  my iphone email

    I have been using my iphone for almost a year and after my email address was hacked yesterday by a diet berry fake email, i can send out an email from my phone.  I have removed, rebooted, removed, etc.....and changed my password, still can't send out an email.
    Error Message:  A copy has been placed in your outbox.  Sending the message content to the server failed.
    Thanks

    OR they are the right settings but you are trying to send through a different internet provider or 3G provider, that does not allow that SMTP server to send email.
    if I send email from 3g or someone elses wifi on a different ISP, it will not work, because it does not allow that server to be contacted. this is normal.
    What you want to do is setup a gmail account and use their SMTP server settings for the defauly outgoing server. that way you dont have to worry about this.

  • A copy has been placed in your outbox. sending the message content to the server failed

    all of the sudden my phone wont send emial but will receive them. I have tried everything suggested as far as turn on/off, delete acct and set it up again and nothing seems to be working. Can someone help me please?? the error message i receive is "a copy has been placed in your outbox. sending the message content to the server failed"

    I think what happened to me was that my yahoo account was compromised by http://thenextweb.com/insider/2013/01/07/yahoo-mail-users-hit-by-widespread-hack ing-xss-exploit-seemingly-to-blame/
    Yahoo responds to these reports at the end saying they fixed the issue.  I think what that my mobile yahoo mail was somehow blocked by yahoo because that was the device that i logged into right before (the hacker) blasted all of my inbox.  That is the only thing I can think of.  Exactly 24 hours later I was able to send email.  I did figure out that for the iPhone 4gs you can go into your settings and yahoo mail and change the outgoing server from yahoo to gmail if you have gmail set up on your phone and that will allow you to send from yahoo through gmail.  I also sent a feedback form to yahoo, that is the only way to contact them, and have heard nothing.  There is nothing about this on their support site.  So let us know if after 24 hrs you are magically able to send.   Yahoo really should use that log in history where they can see that a log in has occurred from a strange IP to block that and warn the user.   My log in history right before this happened went:  home IP in the US, home IP, homeIP, home IP, Morroco, home IP, home IP, etc.    So it is blatantly obvious.  My little software company can block IP's, I know yahoo can.

  • Error while sending the messages to JMS Queue

    Hi ,
    I am trying to pick the file from JMS Queue and send the response xml as outbound message to JMS Queue again using XAI Sender
    I Created XAI Sender, Outbound Message Type(DM-RCVRESP) and configured these two with External System.
    I am able to pick the file from JMS Queue but unable to send the message through XAI Sender (Real-time)
    Plz find below the error trace getting.
    [Wed Jun 15 16:12:09 IST 2011] Error while processing sender "UPLOADSTG" : Unable to update response in staging table: Row id not given.
    com.splwg.mpl.sending.SameThreadSendingManager$ProcessException
         at com.splwg.mpl.sending.SameThreadSendingManager.processDestination(SameThreadSendingManager.java:341)
         at com.splwg.mpl.sending.SameThreadSendingManager.sendResponse(SameThreadSendingManager.java:293)
         at com.splwg.mpl.sending.SameThreadSendingManager.doSend(SameThreadSendingManager.java:249)
         at com.splwg.mpl.server.async.ExecSendRequestProcessor.ProcessRequest(ExecSendRequestProcessor.java:61)
         at com.splwg.mpl.server.async.RequestProcessingThreadAdapter.run(RequestProcessingThreadAdapter.java:46)
         at com.splwg.mpl.server.PooledThread.run(PooledThread.java:91)
         at java.lang.Thread.run(Thread.java:662)
    Please guide me in this regard..
    Thanks,
    sukumar

    What have you configured for the response tab for the sender? Are you using the MPL or the MDB?
    Take a look at:
    MPL Best Practices (Doc Id 1308165.1)
    Oracle WebLogic JMS Integration (Doc Id: 1308181.1)

  • I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?

    I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?

    How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

  • Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

    Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80004005-00000000-00000000].
    In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
    moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
    + at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
    mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that. 
    But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
    a new, unusual issue I have seen as well. 
    We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
    up.
    Thanks.

    Hi,
    You can refer to the following steps to rebuild an Offline Address Book.
    1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
    2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
    3. Start Outlook and download OAB.
    What's more, here is an article for your reference.
    How to Quickly Rebuild an Exchange 2010 Offline Address Book
    http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • When I send a text message it says delivery failed.  When I resend it sends the message twice.  Why am I having problems?

    When I send a text message it says delivery failed.  When I resend it sends the message twice.  Why am I having trouble?

        Oh goodness! We want your text going through the first time, dria56. Does this happen when you're messaging someone in particular or is it every message you send? Is it a plain text or a message with more than 160 characters/graphics/pictures?
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • When I enter a group name into the Bcc field and try to send the message, I get "[group name] is not a valid e-mail address..."

    Been using the same template to send a weekly newsletter for a year or two but now with a recent update to Thunderbird the group name is rejected when I try to send the message:
    With a group name in Bcc field, when I press "Send" and try to send the message, I get this alert: "[group name] is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail."

    This has been reported as [https://bugzilla.mozilla.org/show_bug.cgi?id=1060901 Bug #1060901]. If you have an account on Bugzilla, please consider voting for that issue.
    Several other people have sent in the same support request as you, noting this happened after they upgraded to version 31.1.
    The exact error message is: XXXX is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
    '''This happens in Thunderbird 31.1.0 when your mailing list description includes several words separated by spaces.'''
    Although not ideal, these workarounds should let you use your mailing lists until a proper fix is implemented:
    * While composing an email open the address book and select the list you are trying to send to, highlight all the names in the list and drag them to the To: box. This uses your existing data without modifying it.
    * Replacing the blanks " " between the words in such lists' descriptions with an underscore "_". This requires modifying your mailing list(s) description(s).
    * Downgrade to a previous version and disable automatic updates (Windows)

  • An error occurred while sending the message

    I compose a email.When I click the send link ,an error occurs. The error page said "An error occurred while sending the message". Could anybody tell me what's wrong. Thanks.

    Hi,
    lsnrctl is not not able to start listener running on ports < 1024. Try starting the listener with the tnslsnr tool directly. My recommendation is to start it as root directly, so you don't have to set the s-bit.
    <midtier_home>/bin/tnslsnr listener_es -u <uid> -g <grpid> &
    Regards
    Christian

Maybe you are looking for

  • HT5246 Just got the update.  Nothing came up.  Does this mean I don't have it?

    I've been reading about the Java Malware for the past week.  I heard Apple had released an update for Java, but I never got one when I clicked on Software Update.  A friend suggested that I may not have Java on my MBP.  This morning I finally got a n

  • Converting the rulesets from .txt format to Excel?

    Dear all, Is there a conversion utility available to convert GRC rulesets which have been exported from the tool in .txt format to excel? I am looking for something which can break up the rulesets into various tabs with  in the main worksheet. Curren

  • Remove tenuous links to previous iMac owner

    Hi All OK, after various 'suggestions' from apple support personnel, I'm hoping someone here may be able to help. I purchased a second-user mid 2011 27" iMac with Mountain Lion. Using migration assistant, installed my TM backup from older Macbook Pro

  • Install fails - CC Photoshop.

    Adobe Application Manager repeatedly fails to install, so I can't install CC Photoshop. Turning off antivirus software doesn't help. What else to try?

  • Can I import a project from laptop which has same file names as existing

    Im about to import a project from Aperture on my on-road laptop to my main Aperture library on my studio Mac when i realised that the new camera i purchased for the road trip has named the files exactly the same as some files (but different pictures)