Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].
In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
+ at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that.
But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
a new, unusual issue I have seen as well.
We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
up.
Thanks.

Hi,
You can refer to the following steps to rebuild an Offline Address Book.
1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
3. Start Outlook and download OAB.
What's more, here is an article for your reference.
How to Quickly Rebuild an Exchange 2010 Offline Address Book
http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000]

Software: Microsoft Office 2007 Professional Plus
Service: Microsoft Office 365 - Cloud Hosted
Hello,
I have a user who receives this error when trying to send a calendar invite to her coworkers (names have been changed for privacy):
The following recipient(s) cannot be reached:
Megan Bennis on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Charity Lurk on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Susan Parker on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
All three of these users are in her address book, and are all in her office residing on the same Office 365 domain account.
I have tried the troubleshooting methods outlined in this article, but they did not resolve the issue: http://theitbros.com/office-365-this-message-could-not-be-sent-try-sending-the-message-again-later/
- This entailed manually downloading/updating the address book via 'Send/Receive --> Download Address Book...'. The second method in that article had me rename/move/delete the Address Book files stored on the local machine, and then allow them to
repopulate when you open Outlook again. This also did not resolve my issue.
Any ideas? Thanks in advance!

That's the kind of message you will see when trying to send on behalf of/send as another user, when you don't have the necessary permissions added. Or you are using the wrong send method, or using an outdated name cache entry, or the OAB is outdated.

IProcurement is not a valid responsibility for the current user. Please contact your System Administrator.

Hi All,
When I am trying to click on the 'iprocurement Home page' menu in the iprocurement responsibility getting the below error message in R12;
"iProcurement is not a valid responsibility for the current user. Please contact your System Administrator."
Can any one let me know how to resolve this?
Regards
Joseph

Hi Joseph,
I am assuming that the user actually has the iProcurement responsibility assigned to them. If so, try the following solution from note 1560400.1:
1) Logon with System Administrator responsibility
2) Navigate to Profile > System, click on User and enter the user name
3) Search for profile 'Applications Start Page'. Delete the value set at user level and save
4) Retry
Regards,
Cheryl

A connection to server could not be made hence proper authentication cannot be made please check your network..

I am using Oracle 10g server for database and VB Dot Net application for my Office. These were worked properly in Windows Xp all versions but in windows 7 not working. I installed Oracle 10g client and added ODBC client successfully. server also communicating
properly, and I installed my application also. After installing it was showing the error msg "a connection to server could not be made hence proper authentication cannot be made please check your network" when I trying to open the application. Please
check this and give answer to help me.

Hi Mohankrishnag,
This is Microsoft SQL Server Analysis Services forum. According to your description, you issue is related to Oracle database and your customer application. If the issue relate to SSAS, please elaborate your issue, so that we can make further analysis. If
the issue not relate to SSAS, please post the issue on a corresponding forum, so that you can get more help.
Here are some links for your reference.
http://www.mathworks.in/matlabcentral/answers/35892-problems-connecting-with-oracle-database-win7-64-bit-os
http://stackoverflow.com/questions/15448362/ms-sql-server-cannot-odbc-connect-on-windows-7
Regards,
Charlie Liao
TechNet Community Support

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

AC 6.01 Message: Find wireless Network is disabled. Contact your network administrator

hi, i cant manage wireless networks with AC 6.01. Profile "Create" is greyed out and I am not able to create new profiles, can't find new wireless network etc. Few weeks ago, everything was working fine. When I try Fn+F5 and click "Find Wireless Netowork" I got message "Find wireless Network is disabled. Contact your network administrator". I am administrator on computer.
What i found interesting is that if i stop the service "AcPrfMgrSvc" from services.msc, i can find networks but then i cant use AC profiles i.e. cant create profiles and cant connect to any saved profile. This problem gave me real headache. This might be a problem due to any windows update.
I m using Windows 7 on Thinkpad E520. Please helppppp....

I don't think this is a Windows update problem. I encountered this same problem
immediately after I allowed Lenovo to update my laptop a month or so ago. (I have
always refused to allow Lenovo to update my system since I didn't trust them -
apparently with good reason - but I finally said OK. (My Windows 7 OS has not been
updated since Nov. 2012.) Lenovo has been no help in fixing the problem they
created (which has put Lenovo at the bottom of my list for future systems - see below.)
I have not tried disabling "AcPrfMgrSvc", I am only commenting on not being able
to Find Wireless Networks. I have read posts/comments in various places saying
to revert to a previous "version" of something (I don't remember what - AC?), but
have found nothing that explicitly states how to do that - as if it should be obvious.
Not helpful either. Documenting that would be the least Lenovo itself could do. (I
did try reverting to a full system backup I had made the day before, but I found I could
not do that without having a system disk that Lenovo said would cost $50 - which also
means NONE of the backups I have done over the last year and a half have any
value?)
So I have pretty much stopped using my two recent Lenovo systems and gone back
to my 9-year old Linux system.

The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailabl. If this problem persists, contact your network administrator.

Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.

Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support

AC 5.12 Message: Find wireless Network is disabled. Contact your network administrator

I can't manage access conection. I can't select "Create New Profile" and I am not able to create new profiles, can't find new wireless network etc. Few weeks ago, everything was working fine. When I try Fn+F5 and click "Find Wireless Netowork" I got message "Find wireless Network is disabled. Contact your network administrator". I am administrator on computer. I installed AdminEnabler.exe but still doesn't work. I use XP Pro and Access Conection version 5.12. Thanks in advance.
Moderator note: subject line specified for clarity.
Message Edited by Agotthelf on 16-08-2009 03:18 PM

Hm, I can't remember how I did this but I think that I removed instalation from add/remove programs. Also find the folder where are the files, there you also you may find exe file which will remove all instalation. My is in C:\Program Files\ThinkPad\ConnectUtilities. KillAC.exe is file that you may need.
After this, go to support and download pages and from there you should download and install newest version.
Should solve the problem.

VS 2010 This file could not be uploaded. The following error occured: External component has thrown an exception.

I just started getting this error message from my VS 2010 VB code, earlier this code ran without the error message. I suspect corruption since this error does not occur on another computer of mine. I tried repairing the installation of VS
2010 without results. Then I uninstalled VS 2010 and reinstalled it, but the error continues. The error message is not very definitive so I do not know how to proceed. I could provide the code, but it is rather lengthy and I don't get this error
with the VS 2010 installed on my laptop. So, I don't think my code is the issue. I would be very grateful for any suggestions you may care to offer for isolating and correcting this problem. Thank you. .......................Phil Hoop
Phil Hoop

Hi Phil,
What’s the template type of the project? Is it a BI project? Based on my research, the issue may be related to the following factors:
.NET Framework version of the project. If it targets .NET Framework 4.0 or higher, modify it to target .NET Framework 3.5 instead.
Debug or Release Configurations. If the project is set to Release Configurations, try to set it to Debug. For more information, please see:
http://msdn.microsoft.com/en-us/library/wx0123s5(v=vs.100).aspx
I noticed that you have asked another question in the asp .net forum, if the issue is not SQL Server BI project related, I suggest that you continue troubleshooting within the
thread in the asp .net forum.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

When I try to save a form as "Reader Extended PDF" in Acrobat Pro, I get an error message "This document could not be reader enabled".

Hello,
When I try to save a form as “Reader Extended PDF” in Acrobat Pro, I get an error message “This document could not be reader enabled”.
The steps I’m following are described below:
1. Insert electronic signatures
- In Tasks, click on “Add New Field -> Digital Signature”.
- Move the square to the place where you want to put the signature and click.
- Fill in the “field name” with the name of the person who has to sign here.
- When it is done, click anywhere on the screen.
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
2. Save the Form
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
I am using Adobe Acrobat Pro 10.0.0 on a W7 workstation
Here's a screenshot of the problem.
Thanks a lot.
Gael

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

I can no longer access Bejeweled Blitz through my facebook account. I get the message that says, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". Help please.

I can no longer access Bejeweled Blitz through facebook. I get the message, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". I can access Bejeweled through FB using my husband's log in so to me that suggests the problem is with my log in. Help please.

Contact FB or use another browser.

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

2012 R2 Fax Server -- "The Message could not be sent. The wait operation timed out."

I receive the following error on a newly installed 2012 R2 fax server when sending from the Windows Fax and Scan console:
"The Message could not be sent. The wait operation timed out."
The test fax that fails only contains text that I type into the body. However, if I add an attachment, the fax is successful.
Any ideas??

Hi,
Would you please let me confirm whether install any third-party application on the Windows Server 2012 R2?
Please perform a clean boot to eliminate software conflicts and monitor the result. Please also check if you install all necessary updates on the server.
Meanwhile, please run
sfc /scannow command to scan all protected system files and check if find issues.
Please also refer to following article and check if can help you.
Troubleshooting Your Fax Server
By the way, there is a similar thread. Please also refer to following thread and check if can help you.
Windows
Fax and scan (Windows 8)
Hope this helps.
Best regards,
Justin Gu

This document could not be registered. It will not be possible..... (MS Word) Windows 7 MS 2010

Recently anything typed in Word is no longer retreivible (randomly). 15 minutes after typing a document, I get:
"this document could not be registered. It will not be possible to create links from other documents to this document."
Sometimes the document has links within in it sometimes not... either way have I select each of the three options and the protected view disappears, and a blank MS Word page comes up. After three times, (with various documents) the program reports,
"Word stopped working and is looking for a solution..."
My research found that I should looking at DCOM Server Process Launcher - making sure that it is in under the General Tab, Startup Type be changed to Automatic...
It is and has been in automatic (and I cannot change it) this is were my problem does not match what I was finding for corrections.
I can change other services and make changes in most tabs, BUT I CAN CHANGE NOTHING IN DCOM SERVER PROCESS LAUNCHER.
Please advise - soon

Check the following article on the error: "this document could not be registered. It will not be possible to create links from other documents to this document."
http://sharepointknowledgebase.blogspot.in/2012/08/this-document-could-not-be-registered.html
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice.
Microsoft does not guarantee the accuracy of this information.)
Refer to the link below on How to troubleshoot problems that occur when you start or use Word:
http://support.microsoft.com/kb/921541
In addition check the following thread:
http://social.technet.microsoft.com/Forums/office/en-US/ade00dbd-4dc1-49ba-89e2-d43af5c85356/word-2010-could-not-create-the-work-file-error-message-when-opening-word-email-attachments?forum=word
Tylor Wang
TechNet Community Support

An email could not be sent and a message appears every time i open mail how can i get rid of message

sorry this was a vague problem...i sent an email to a french website but it bounced back saying messge could not be sent due to mistake in address. now every time i go to my mail the message..This mail cannot be sent appears..i press the OK to and it still appears every time i log on..Any clues on how to get rid of this message?

You are welcome. Is the problem solved or is more troubleshooting required.

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

Similar Messages

Maybe you are looking for