ExceptionInInitializer when running Jar

Hi,
I have developed an application which uses jdk1.4,jai and 2 classes from the jai demo classes. My application does not work when I create a jar however it does otherwise. I have included the jai_codec.jar and jai_core.jar classes in my jar. When my jar is run I get the following error:
Exception in thread "main" java.lang.ExceptionInInitializerError
<...>
Caused by: java.lang.RunTimeException: Registry intialization file not found.
at javax.media.jai.OperationRegistry.initializeRegistry(OperationRegistry.java:363)
Any help is much appreciated!!!!

Hi again,
it turns out that the application outputs the above error if I run it from anywhere except EditPlus (what I use to code my applications - not an IDE), i.e. if I run the main class file from the command line, the same thing happens.
AAAAAHHHHH!!!!!

Similar Messages

Error messege when run jar file

when i run jar file of my project give me that error(Fatel exception occured.program will exist)
what is the reason of that error

"can't get that path". Sounds like requisite classes aren't on the classpath.
Please paste the ENTIRE error message that it's producing into your next reply. You have probably forgotten to include necessary classes - perhaps a JDBC driver - in your JAR file.

Console not display when run jar file

i run jar file with command javaw -jar test.jar or double click on jar file, it's console app, it just run well but console not display, can i made console display and when i close console, it's stop jar file too?
thanks

i got it, javaw = no console window, i tried java command and i got error: can not access jar file?

ExceptionInInitializer when running weblogic.jspc

I am getting the following error when running weblogic.jspc:
          I am using 4.5.1 and am trying to pre-compile a jsp file.
          Any ideas?
          I am using the following command line:
          java -classpath $CLASSPATH:$WEBLOGICCLASSPATH
          -Dweblogic.class.path=$WEBLOGICCLASSPATH weblogic.jspc 100-Welcome.jsp
          I have also tried the above command w/ -classpath $CLASSPATH
          Thanks,
          Richard
          java.lang.ExceptionInInitializerError
          at java.lang.Throwable.<init>(Compiled Code)
          at java.lang.Error.<init>(Compiled Code)
          at java.lang.LinkageError.<init>(Compiled Code)
          at java.lang.ExceptionInInitializerError.<init>(Compiled Code)
          at java.beans.Beans.instantiate(Compiled Code)
          at weblogic.servlet.jsp.JspLexer.processBeanTag(Compiled Code)
          at weblogic.servlet.jsp.JspLexer.mXML_OPEN_USEBEAN(Compiled
          Code)
          at weblogic.servlet.jsp.JspLexer.mXML_THING(Compiled Code)
          at weblogic.servlet.jsp.JspLexer.mTOKEN(Compiled Code)
          at weblogic.servlet.jsp.JspLexer.nextToken(Compiled Code)
          at weblogic.servlet.jsp.JspLexer.parse(Compiled Code)
          at weblogic.servlet.jsp.JspParser.doit(Compiled Code)
          at weblogic.servlet.jsp.JspParser.parse(Compiled Code)
          at
          weblogic.servlet.jhtmlc.Jhtml2Java$Output.setSourceFile(Compiled Code)
          at weblogic.servlet.jhtmlc.Jhtml2Java.outputs(Compiled Code)
          at weblogic.utils.compiler.CodeGenerator.generate(Compiled Code)
          at weblogic.jhtmlc.runBody(Compiled Code)
          at weblogic.jspc.runBody(Compiled Code)
          at weblogic.utils.compiler.Tool.run(Compiled Code)
          at weblogic.jspc.main(Compiled Code)


Hi again,
it turns out that the application outputs the above error if I run it from anywhere except EditPlus (what I use to code my applications - not an IDE), i.e. if I run the main class file from the command line, the same thing happens.
AAAAAHHHHH!!!!!

Exception when Running Jar File

Hello,
I have downloaded a jar file from http://sourceforge.net/projects/sarf/
It's an Arabic Morphology System, The program run successfully but when I try to use the User Interface by entering an input and clicking on the main button, I get the following Exception:
java.io.FileNotFoundException: .\db\trilateral\augmented\?.xml (The system canno
t find the file specified)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
        at org.apache.commons.digester.Digester.parse(Digester.java:1477)
        at sarf.verb.trilateral.augmented.AugmentedTrilateralRootTreeCreator.bui
ldXmlVerbTree(AugmentedTrilateralRootTreeCreator.java:42)
        at sarf.DatabaseManager.getAugmentedTrilateralRootTree(DatabaseManager.j
ava:85)
        at sarf.SarfDictionary.getAugmentedTrilateralRoot(SarfDictionary.java:37
        at sarf.ui.ControlPaneContainer.processTrilateral(ControlPaneContainer.j
ava:345)
        at sarf.ui.ControlPaneContainer.rootEntered(ControlPaneContainer.java:30
8)
        at sarf.ui.ControlPaneContainer.access$400(ControlPaneContainer.java:32)
        at sarf.ui.ControlPaneContainer$10.actionPerformed(ControlPaneContainer.
java:246)
        at javax.swing.JTextField.fireActionPerformed(JTextField.java:492)
        at javax.swing.JTextField.postActionEvent(JTextField.java:705)
        at javax.swing.JTextField$NotifyAction.actionPerformed(JTextField.java:8
20)
        at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1636)
        at javax.swing.JComponent.processKeyBinding(JComponent.java:2851)
        at javax.swing.JComponent.processKeyBindings(JComponent.java:2886)
        at javax.swing.JComponent.processKeyEvent(JComponent.java:2814)
        at java.awt.Component.processEvent(Component.java:6040)
        at java.awt.Container.processEvent(Container.java:2041)
        at java.awt.Component.dispatchEventImpl(Component.java:4630)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.ja
va:1848)
        at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboard
FocusManager.java:704)
        at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeybo
ardFocusManager.java:969)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeybo
ardFocusManager.java:841)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFoc
usManager.java:668)
        at java.awt.Component.dispatchEventImpl(Component.java:4502)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Window.dispatchEventImpl(Window.java:2475)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:269)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:184)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:174)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
        at sarf.SarfDictionary.getAugmentedTrilateralRoot(SarfDictionary.java:38
        at sarf.ui.ControlPaneContainer.processTrilateral(ControlPaneContainer.j
ava:345)
        at sarf.ui.ControlPaneContainer.rootEntered(ControlPaneContainer.java:30
8)
        at sarf.ui.ControlPaneContainer.access$400(ControlPaneContainer.java:32)
        at sarf.ui.ControlPaneContainer$10.actionPerformed(ControlPaneContainer.
java:246)
        at javax.swing.JTextField.fireActionPerformed(JTextField.java:492)
        at javax.swing.JTextField.postActionEvent(JTextField.java:705)
        at javax.swing.JTextField$NotifyAction.actionPerformed(JTextField.java:8
20)
        at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1636)
        at javax.swing.JComponent.processKeyBinding(JComponent.java:2851)
        at javax.swing.JComponent.processKeyBindings(JComponent.java:2886)
        at javax.swing.JComponent.processKeyEvent(JComponent.java:2814)
        at java.awt.Component.processEvent(Component.java:6040)
        at java.awt.Container.processEvent(Container.java:2041)
        at java.awt.Component.dispatchEventImpl(Component.java:4630)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.ja
va:1848)
        at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboard
FocusManager.java:704)
        at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeybo
ardFocusManager.java:969)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeybo
ardFocusManager.java:841)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFoc
usManager.java:668)
        at java.awt.Component.dispatchEventImpl(Component.java:4502)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Window.dispatchEventImpl(Window.java:2475)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:269)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:184)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:174)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)Can anyone please help me, is there anything that I need to install in before running the jar file???
Many thanks,
Moe

Doesn't look like a widely used app to me. I suppose trying to contact the creator of it is futile and that's why you're hoping for luck here. I wouldn't hold my breath.
Or maybe you're the creator of it and this is a sneaky way of getting people to look at your product? Hmmm...

Problems with running jar on linux

Are there any known problems when running jar files on linux, that were compiled on windows?
http://turkeybot.info/DuckHunt.jar
The images directory that is in that refuses to load under linux, but there's no problem with windows (it's using System.getProperty("file.separator") to get hte correct file separtor to refer to the image directory).

Java code should run in all JVMs. But if you did something Windows-specific (such as looking for a file named C:/something/or/other) in your code then you can't expect it to run in other environments.

Jdbc connection blocks when run from jar

The following code establishes a connection EXCEPT when run from within a jar file:
String jdbcDriverName = "oracle.jdbc.driver.OracleDriver";
String dbConnectionURL = "jdbc:oracle:thin:@192.168.2.7:1521:PRISM";
String userName = "mdo";
String password = "mdpass";
// Load the JDBC driver and create a connection to the database
Class.forName( jdbcDriverName );
OracleDataSource dataSource = new OracleDataSource();
dataSource.setURL( dbConnectionURL );
dataSource.setUser( userName );
dataSource.setPassword( password );
connection = dataSource.getConnection();
When run from a jar file, the application does not execute beyond the line:
connection = dataSource.getConnection();
No exceptions are thrown, it just appears that getConnection never returns.
Do I need to do anything different to execute this code from within a jar file?
Thanks in advance,
Phil
<><

When building the JAR file, I inadvertently included files from two Oracle JDBC driver versions (1.2 and 1.4). I was building a single jar file with all files in it.
I am guessing same named files existed in both driver JARs and caused "confussion" when combined into the single JAR.
Still, I would have expected an exception to be thrown or a null connection to be returned instead if the thread just blocking.
Thanks for all replies,
Phil
<><

Could not read Log4j configuration file when I run jar file

Hi,
I'm using Log4J in my application..
I configure the log4j, as follows;
PropertyConfigurator.configure("properties/logging.properties");and then go on to use it.
The .properties is in the root when I jar my source. I use Ant to Jar the file. It all works good when I run the jar file from ant.
The problem is when I run the jar file by double clicking on it, I get an error
" Could not read configuration file [properties/logging.properties]."
I tried the following options;
PropertyConfigurator.configure("/logging.properties");
PropertyConfigurator.configure("./logging.properties");
PropertyConfigurator.configure("../logging.properties");But in all cases, I get corresponding errors on running the jar file through Ant:
log4j:ERROR Could not read configuration file [logging.properties].
log4j:ERROR Could not read configuration file [./logging.properties].
log4j:ERROR Could not read configuration file [../logging.properties].
I want to be able to run the Jar by double clicking on it or through Ant.. Would any one know how to fix this issue so that I can use both methods..

Keep your properties file inside the root folder of your application.It is working fine

Verification error when run the game after download the jad/jar by OTA on BB 8300

On BB 8800, the jad/jar can be downloaded to the device, when run the game, there is a error msg "Error starting xxxx Module xxxx has verification error xxxx at offset xxxx", the version is OK on BB 8310, but failed on BB 8800 and 8300. I make the version by using proguard 3.8 and WTK22 preverify. I try RAPC preverify and failed again, use proguard 3.3.2 failed too.It seem that it is a compatible problem.
I check the article "Support - MIDlet has verification error at offset", and have no harvest.
BTW, the alx/jad/cod format works fine on BB 8800 and 8300.
How to fix the bug?
Thanks for your help.

Hello,
I gather for your lack of details that you are wanting to get an application that you have written working on the device?
Otherwsie can you specify the name of the application and the details of the error. Someone may have expericne with it.
Lacking this however, the software needs to be fixed.
You'll have better luck looking on the Java forums, not here...
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

How to set OPTS when running a jar

java -Xms60M -Xmx60M -XX:OnError -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/home/userX/outofmemory.log -jar RunThis.jar
i get Unrecognized VM option 'OnError'
Could not create the Java virtual machine.
when running the above statement. i'm using jre6

OnError requires that you actually specify for it to do something when an error occurs.
XX:OnError="<cmd args>;<cmd args>"
[http://java.sun.com/javase/technologies/hotspot/vmoptions.jsp#BehavioralOptions]

Using 3rd Party packages when creating jar - program doesn't run

I am using the xerces and xom packages for xml etc in my program.
It works fine when run from a command prompt, but as soon as I package it into a jar I get the java.lang.NoClassDefFound error for the nu.xom.Builder class (one of the 3rd party classes.)
Reading through these forums has yielded several suggestions, none of which work.
I am probably making some massive stupid mistake, but cannot see it...
My manifest:
Manifest-Version: 1.0
Created-By: 1.6.0 (Sun Microsystems Inc.)
Main-Class: be.bavardage.vocab.VocabGUI
Class-Path: serializer.jar xercesImpl.jar xercesSamples.jar xml-apis.jar xom-1.1.jar
using the jar comand line prompt:
jar cfm vocab.jar MANIFEST.MF be\bavardage\vocab\*.classCan anyone give me any indication as to what I am doing wrong...

bavardage,
I too am reading forum messages to try to do just what you originally wanted to do. I have 3rd party JARs and I have always first extracted them and then turned around and JAR'ed them up into my single Remote.jar (actually I'm so new to Java that I don't yet change things that aren't broken and this was working when I got it)
jar xf jakarta-oro-2.0.5.jar
jar xf jasperreports-1.2.1.jar
jar xf iReport.jar
jar cmf mainClassSpec Remote.jar *.class org/ net/ it/I am reading the forums for a way to NOT do this. My reason is because I want to make the application Java Web Start (JAWS) capable. By zipping all the JARs up into one I end up with a JAR over 6 MB! I am also adding internationalization and I really need to keep the ListResourceBundle classes in a separate JAR so I can keep adding languages and not cause the entire 6 MB file to be downloaded each time.
Using Java Web Start is the real motivating force here. I need to keep all JARs separate so that when there are code changes or new languages only one small JAR will be downloaded again by JAWS not the huge iReport.jar file at 4,218KB nor the somewhat smaller jasperreports...jar at 1,225KB (at 64KB jakarta-oro...jar is hardly worth mentioning) .
I will watch this thread to see if you or anyone else later comes up with the information to reference external JARs (while in a Java Web Start environment).
So to put it in a question format, can anyone provide some information about referencing external JARs in a normal environment and will it work in a JAWS environment (I do know the technique for specifing and downloading multiple JARs in a JNLP file)?
Hopi(ng)

Accessing files from jar file when running application?

I have an application that when run should read an xml file (test.xml) from a jar file located in a resource folder. I do this:
    File f = null;
    URL url = this.getClass().getClassLoader().getResource("test.xml");
    try {
      f = new File(url.getPath());
//      f = new File(url.toURI());
    } catch (Exception e) {
      throw new GeneratorException("Preload input not found!");
    }The file is found in the jar but when I want to use it I get problems:
when doing:
f = new File(url.getPath());
this file is not found and when doing:
f = new File(url.toURI());
I get and:
URI is not hierarchical exception
Is there now way to convert the xml file in the jar file to a File object?

fedevaps wrote:
But is there now otherway to create a File from the URL?Only if the URL refers to a file in the first place. Which it doesn't when the URL refers to an entry in a ZIP file because an entry in a ZIP file is not a file.
java.io.File refers to physical files in the sense that the operating system uses it. It can't refer to Files on remote machines, it can't refer to "files" stored in .ZIP files and it can't refer to some random String that you construct.
Usually when you think you need a File object in Java, you don't actually need it. There are only a handful of operations that you can do with a File object that can't be done with a URL as well (deleting, renaming are two that come to my mind). Reading from it and writing to it works with a File as well as with an URL.

[svn] 1985: use the asc.jar in the lib folder when running the asc tests

Revision: 1985
Author: [email protected]
Date: 2008-06-06 12:20:06 -0700 (Fri, 06 Jun 2008)
Log Message:
use the asc.jar in the lib folder when running the asc tests
Modified Paths:
flex/sdk/trunk/build.xml

You may want to use the filtering classloader. See the doc at http://e-docs.bea.com/wls/docs92/programming/classloading.html#wp1097187

PersistenceService denies permission when running an Applet

I'm converting an application that uses JWS to run inside a browser. Ok, so it's not just a matter of changing <application-desc> to <applet-desc> (which is just about the only change I made to the jnlp), but the problem I'm getting is not one I expected.
try {
      URL newURL = new URL(newURLBase);
      InputStream is = ps.get(newURL).getInputStream();
      userProps.load(is);
      is.close();
    } catch (FileNotFoundException fne) {
      // nothing to do
    } catch (Exception e) {
      // any other error is bad
      Globals.nonFatalMsg(null, classId, propsFailureMsg, newURLBase, e.getClass().getName(), e.getMessage());
    }This code is throwing a MalformedURLException. (ps is an instance of PersistenceService). The Message returned by getMessage() is that access to persistent data was denied for the URL.
This exact code works perfectly well when run from the desktop application. I'm serving the same jar for the application and the applet. So the URL in newURL is exactly the same for both the application and the applet (I'm serving them both from the same IIS web site). Just the HTML and the JNLP are different.
I thought JWS applets and applications run in exactly the same sandbox. And I thought PersistenceService didn't need any kind of permissions. (Although the JavaDoc does say this can happen.)
Could this be a Browser issue? I get the same result in FireFox and IE. Could it be a java.policy issue?
I'm running 1.6.0_20.

Doctor_Dad wrote:
I converted Andrew Thompson's JotPad application, which illustrates the use of the Persistence Service in a JWS Application, to run as an Applet and got exactly the same result.
From which I can only conclude that the Persistence Service doesn't work with Applets.
Has anyone out there ever used the Persistence Service with Applets? Short story, no. I had your post flagged from when I first saw it, thinking "When I get time.." - but had not found any time yet.
I'll check the Bug Parade to see if this has been reported...Good idea. It is not quite clear how a variety of the services of the JNLP API should translate to embedded applets. These would namely be.
- SingleInstanceService // not an applet's right to control browser instances
- BasicService.showDocument(URL) // replaces the applet page or opens new browser/tab?
- IntegrationService // 1.6.0_18+ - shortcuts and menu items are not appropriate for an embedded applet.
I was about to include the PersistenceService in that list, but ultimately it makes every bit of sense to allow embedded JNLP applets to have access to serialisation between runs. The older methods of applets storing data are now probably blocked to the JNLP embedded applets (e.g. creating a cookie).
If you cannot find anything in the bug DB, please raise a bug report and request the documentation address all these areas.
Edit 1:
By 'bug report' above, read 'request for enhancement'. Whether it is a bug depends on Sun's expectation of what they wanted the API to do. ;)
Edited by: AndrewThompson64 on Jun 15, 2010 10:06 AM
Edit 2:
BTW - did you try it with a free-floating applet as well, or just an embedded applet?
Edited by: AndrewThompson64 on Jun 15, 2010 10:47 AM

ExceptionInInitializer when running Jar

Similar Messages

Maybe you are looking for