Excess time taken to schedule requests to the report server

I have a file which contains 10000 requests to be send to the report server. The total time taken by the report client to send the request to the report server is somewhere around 4 - 5 hours. Why does report client take so much time to schedule the request to the report server ????? How can i get around this problem, since the report execution doesn't start till the last request has been send since i am using schedule=<some_delay> and not schedule=NOW.

Similar Messages

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

I have request in the report level but the same is missing in the infocube

Dear Experts,
I have request in the report level but the same is missing in the compressed infocube level. What could be the cause? does the compressed infocube deletes the request ? if so, I could able to view other requests under infocube manage level.
Kindly provide with enough information.
Thanks.............

Hi
Compressing InfoCubes
Use
When you load data into the InfoCube, entire requests can be inserted at the same time. Each of these requests has its own request ID, which is included in the fact table in the packet dimension. This makes it possible to pay particular attention to individual requests. One advantage of the request ID concept is that you can subsequently delete complete requests from the InfoCube.
However, the request ID concept can also cause the same data record (all characteristics agree, with the exception of the request ID) to appear more than once in the fact table. This unnecessarily increases the volume of data, and reduces performance in reporting, as the system has to perform aggregation using the request ID every time you execute a query.
Using compressing, you can eliminate these disadvantages, and bring data from different requests together into one single request (request ID 0).
This function is critical, as the compressed data can no longer be deleted from the InfoCube using its request ID. You must be absolutely certain that the data loaded into the InfoCube is correct.
Features
You can choose request IDs and release them to be compressed. You can schedule the function immediately or in the background, and can schedule it with a process chain.
Compressing one request takes approx. 2.5 ms per data record.
With non-cumulative InfoCubes, compression has an additional effect on query performance. Also, the marker for non-cumulatives in non-cumulative InfoCubes is updated. This means that, on the whole, less data is read for a non-cumulative query, and the reply time is therefore reduced. See also Modeling of Non-Cumulatives with Non-Cumulative Key Figures.
If you run the compression for a non-cumulative InfoCube, the summarization time (including the time to update the markers) will be about 5 ms per data record.
If you are using an Oracle database as your BW database, you can also carry out a report using the relevant InfoCube in reporting while the compression is running. With other manufacturers databases, you will see a warning if you try to execute a query on an InfoCube while the compression is running. In this case you can execute the query once the compression has finished executing.
If you want to avoid the InfoCube containing entries whose key figures are zero values (in reverse posting for example) you can run a zero-elimination at the same time as the compression. In this case, the entries where all key figures are equal to 0 are deleted from the fact table.
Zero-elimination is permitted only for InfoCubes, where key figures with the aggregation behavior SUM appear exclusively. In particular, you are not permitted to run zero-elimination with non-cumulative values.
For non-cumulative InfoCubes, you can ensure that the non-cumulative marker is not updated by setting the indicator No Marker Updating. You have to use this option if you are loading historic non-cumulative value changes into an InfoCube after an initialization has already taken place with the current non-cumulative. Otherwise the results produced in the query will not be correct. For performance reasons, you should compress subsequent delta requests.
Edited by: Allu on Dec 20, 2007 3:26 PM

Failed to send a request to the message server

Please help me with the problem as below with Basis 6.5 / ECC5 , Windows Server 2003 / Oracle ( 9.2) environment
With Sick it says
Severe problems were detected during initial system check.
Please, do not use that system before fixing these problems.
when I run SM50
error: Update is not active
When I checked SAP MMC, i found   Msg_server stopped
I am getting following error log with SM21
04:44:28 DP                           Q0N Failed to send a request to the message server
04:44:28 DP                           Q0N Failed to send a request to the message server
04:44:33 DP                           Q0N Failed to send a request to the message server
04:44:33 DIA 01 020 SAPRFCBWP         EK1 Error found in PBT environment, FM = SPBT_INITIALIZE
04:44:33 DIA 01 020 SAPRFCBWP         EK4 > Failed to determine server information
04:44:53 DIA 01 020 SAPRFCBWP         AB0 Run-time error "MESSAGE_TYPE_X" occurred

Hi,
Seems to be a problem with your GUI as the dump MESSAGE_TYPE_X is generally related to GUI. Use some higher version of GUI than the existing one.
Also Updates are not active in your system. Use transaction SM13 to check whether updates are active or not. If not then use transaction SM14 to turn on the updates.
Regards
Sourabh Majumdar

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

SharePoint List Error :[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)

When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew

Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren

DataSource.Error: SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error.

Seeing this error when retrieving data from a SharePoint list. I have full access to the list. Any help would be appreciated.
DataSource.Error: SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
Details:
https://xyz/_vti_bin/ListData.svc/ListName


I think I figured out how to use Fiddler. Here's the information I captured-
This is a Tunnel. Status: OPEN, Raw Bytes Out: 3,797; In: 7,604
The selected session is a HTTP CONNECT Tunnel. This tunnel enables a client to send raw traffic (e.g. HTTPS-encrypted streams or WebSocket messages) through a HTTP Proxy Server (like Fiddler).
To enable Fiddler's HTTPS-decryption feature and view decrypted traffic, click Tools > Fiddler Options > HTTPS.
Request Count:   1
Bytes Sent:      107  (headers:107; body:0)
Bytes Received: 107  (headers:107; body:0)
Tunnel Sent:     3,797
Tunnel Received: 7,604
ACTUAL PERFORMANCE
ClientConnected: 11:06:11.389
ClientBeginRequest: 11:06:11.395
GotRequestHeaders: 11:06:11.395
ClientDoneRequest: 11:06:11.395
Determine Gateway: 0ms
DNS Lookup:   176ms
TCP/IP Connect: 77ms
HTTPS Handshake: 0ms
ServerConnected: 11:06:11.649
FiddlerBeginRequest: 11:06:11.649
ServerGotRequest: 11:06:11.649
ServerBeginResponse: 00:00:00.000
GotResponseHeaders: 00:00:00.000
ServerDoneResponse: 00:00:00.000
ClientBeginResponse: 11:06:11.649
ClientDoneResponse: 11:06:11.649
Overall Elapsed: 0:00:00.254
-= Fiddler Event Log =-
See http://fiddler2.com/r/?FiddlerLog for details.
10:33:33:8092 Fiddler Running...
10:33:33:8118 Fiddler.Network.AutoProxy> AutoProxy Detection failed.
10:33:33:8118 AutoProxy failed. Disabling for this network.
10:33:33:8118 Windows 8+ AppContainer isolation feature detected.
11:01:21:4125 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4145 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4185 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4258 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4268 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4298 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4528 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4828 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5789 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5820 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5879 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6179 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6530 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6924 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance

HT5429 i m using iphone 4s . when i try to set direction that time i get one error like the map server is not available . will you help me ?

i m using iphone 4s . when i try to set direction that time i get one error like the map server is not available . will you help me ?
how to help this problem..?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Bad load arguments supplied when starting up the Reports Server

Dear All,
In report60\server\<filename>.ora
Following were the contents :
maxconnect=20
cachedir="d:\Oracle\806\REPORT60\server\cache"
cachesize=50
minengine=0
initengine=0
maxengine=1
maxidle=30
security=1
englife=50
We chnaged it to
maxconnect=20
cachedir="d:\Oracle\806\REPORT60\server\cache"
cachesize=50
minengine=1
initengine=0
maxengine=5
maxidle=30
security=1
englife=50
We imideatly got result we checked it put it on live application server.
Everything was smooth but next day we got calls/email from user saying report were slow. when we checked the windows process on application server rwmts60 was occuping 50% of memory so we killed that process. We restrarted the report service but was unable to restart.Then we saw the report log as follows :
*** 2008-07-29 17:36:51 -- Server started up an engine. (Rep60_WEBDB-01)
*** 2008-07-29 17:36:53 -- Server engine crashed. (Rep60_WEBDB-01)
*** 2008-07-29 17:38:18 -- Server started up an engine. (Rep60_WEBDB-01)
*** 2008-07-29 18:39:44 -- Server shutting down an engine. (Rep60_WEBDB-01)
*** 2008-07-30 09:13:19 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** 2008-07-30 09:15:24 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** 2008-07-30 09:17:29 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** 2008-07-30 09:19:34 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** Bad load arguments supplied when starting up the Reports Server
*** Bad load arguments supplied when starting up the Reports Server
*** Bad load arguments supplied when starting up the Reports Server
*** Bad load arguments supplied when starting up the Reports Server
then we changed back our ora file to
maxconnect=20
cachedir="d:\Oracle\806\REPORT60\server\cache"
cachesize=50
minengine=0
maxengine=1
initengine=0
maxidle=30
security=1
englife=50
And restarted the service which restarted suceesfully.
My question is i had changed maxengine=5 and minengine=1 on 20- JUL-2008 around 16:00 .Did this happen b'coz of this 2 parameters.
Kindly advice.
Thanking You in anticipation.
Best Regards,
Devendra

Hello Mahendraji,
Thanks for your reply.
I may ask some basic question please accomodate me.
<<$RACLE_HOME\reports\conf\apple_report.conf>>
I have Application server 9i version 1.0.2.0.0 (isuite).
I have installed in D drive
In this drive a folder d:\orcale is created.
Inside of this i don't have any folder called "reports"
i have folder called "806"
\\webdb-01\D-Drive\Oracle\806
Inside of which i have folder "report60"
\\webdb-01\D-Drive\Oracle\806\REPORT60
Inside of which i have folder "SERVER"
\\webdb-01\D-Drive\Oracle\806\REPORT60\SERVER
In which i found "Rep60_WEBDB-01.ora" , "Rep60_WEBDB-01.log" and "cgicmd.dat"
and 2 folders "CACHE" and "security".
I am confused as you said that the file name should be Rep60_WEBDB-01.CONF but i have Rep60_WEBDB-01.ora are they one and the same . If yes is the extension b'coz i have older version of 9i i.e 1.0.2.0.0 (isuite).
if no where i how i can search this .
This Rep60_WEBDB-01.ora file doesnot have parameter "engineResponseTimeOut" if i add it will it work.
Your explanation regarding "engineResponseTimeOut" is clear.
Maximum Time taken by our report is 20 minutes. But sometimes when report hangs or SQL takes more time than normal due to the environment so the max time might change to 25 or 30 minutes in such a case should we keep it at 45 minutes to avoid any unneccessary termination.
<<Note:
It is always better to run batch reports on a separate server with different engineResponseTimeOut values. Do not submit interactive and batch reports to same server.>>
If i create a seperate application server how can i send reports requested by user to batch in this seperrate server.
What should be the criteria of report to be redirected to seperate server?
What do mean by "submit interactive" and "submit batch"
My interpretation is when we click on submit query button it is "submit interactive" is it correct.
I am not clear about "submit batch"
I know there might be some silly questions but please do accomodate.
Kindly advice.
Thanks.
Regards,
Devendra Shelke

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Oracle Apps Report error "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally."

Hi ,
I have modified layout of one existing custom report.
I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
Any pointers in this regards will be appreciated.
Thanks

I found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.

Error: Unable to communicate with the Reports Server

The configuration I am working with is:
* Oracle 8.1.6 DB on a Unix machine
* Oracle Reports 6i on an NT machine
* Microsoft IIS web server
I have successfully tested my reports during the development phase of my project. Unfortunately, now that it is considered production and is available to upwards of 30 people, I am getting the following error message after verifying the server is up and after a numerous reports have been served:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
After receiving this message I noticed that the Report Server service is down and the log only indicates that it "shut down immediately". (no ORA messages) I tried restarting the service, but after serving one report, it would shut down again with the same message.
I am wondering if it is a problem related to the cache. I used the default of 50M in the config file, but when the cache directory reaches 50M, the problem seems to appear. I then deleted approx. 30M of files from the cache directory and the Report Server service appeared stable. I changed the cache limit to 1M to see if there was a problem with the cache being so big. All appeared well for the first few hours of operation but then the Report Server service shut down again and upon restart crashed within a minute or two (usually as someone tests a report, it crashes again).
Do I have a configuration problem? Has anyone seen this problem? Thanks in advance.

Hi,
I just found out that if i give
http://localhost/cgi-bin/rwcgi60.exe?key1
where key1 is a key mapping file that contains the report name,username and pwd for the database and desformat...etc..
the report pulls out fine with the correct data..
i am stunned...
while none of the other commands like
http://.../rwcgi60.exe
or
http://..../showenv?server=repserver
or any other usual command doesnt work...
anybody faced this before??
Thanks.

Oracle reports 6i error unable to communicate with the reports server

Hi,
I have followed the steps for running oracle reports server 6i..i am using win2k3 and IIS6.0
i have checked tnsnames.ora and sqlnet.ora and everything looks good..
when i try
http://localhost/cgi-bin/rwcgi60.exe
i get a page called User Database Authentication and asks for username,password and database..instead of the help page that should be displayed..
when i enter those values nothing happens for the first time and the same page is displayed again..when i enter it again i am getting this error
url requested not found or cannot be served at this time
oracle reports cgi: unable to communicate with the reports server
any help would be grateful..
Thanks.

Hi,
I just found out that if i give
http://localhost/cgi-bin/rwcgi60.exe?key1
where key1 is a key mapping file that contains the report name,username and pwd for the database and desformat...etc..
the report pulls out fine with the correct data..
i am stunned...
while none of the other commands like
http://.../rwcgi60.exe
or
http://..../showenv?server=repserver
or any other usual command doesnt work...
anybody faced this before??
Thanks.

While preview the report in the reporting server it will show me the password expired?

HI i am working on BIDS 2008R2,
I have deployed my Report soluction in the reporting server,but while i preview the report in my reportig server ,
it will show me the below error ,pls find the scrrenshoot it show the below error
Tell me one thing here i dnt have permisions to view the reports or what,
but while am using windows credntials alos not able to see the reports,
so can you pls help me out for this problem.its urgent basis

Hi Ychinnari,
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. The account is used in the following ways:
Send connection requests over the network for reports that use database authentication, or connect to external report data sources that do not require or use authentication.
Retrieve external image files that are used in report. If you want to use an image file and the file cannot be accessed through Anonymous access, you can configure the unattended report processing account and grant the account permission to access the file.
According to the error message, password of unattended execution account has expired. To troubleshoot the problem, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
If credentials are passed in the connection string, you need to modify password of the connection string.
For more information about Configuring the Unattended Execution Account, please refer to the following document:
https://msdn.microsoft.com/en-us/library/ms156302.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Generating a PDF and then Email it from the report server.....

All,
This is my first post on this forum and I have the following question.....
Please note I am not a DB expert nor a reporting expert but I have done my fair share of reporting using Oracle DB with Oracle Reports or Hyperion.
I have a report that will be posted to the report server that a user can go out and run at there convenience.
As a side note we have recently migrated our Database from ORACLE 8i to 10G and the report was created using Oracle ReportBuilder 10.1.
This report was also mimicked by a Oracle package and emailed out through I believe some PL SQL(?). This is a plain text report in the email.
As I recently did some big changes to the Original report they want this email report to match as well.
Well After looking at what they want in the email its basically the exact same thing as the version the user would see on the web. This seems like a waste of time for myself to edit this Package (For the email report - plaint text) and to have a oracle report available on the web server not to mention the DB dealing with the PLSQL..
So I am asking is there a way to set up Oracle reports to mail a generated PDF or a HTML results file out from the reporting server at a specified time?
If so how is this accomplished?
I see that in the help file in Report Builder that you can set rwbuilder.conf file with the SMTP server but how do I set the email address and the time to run the report.
Thanks for all the help,
Chris

Hello,
Maybe I am not understanding something but we have a reporting server where they basically select the report in a drop down web control and they fill in the necessary parameters and then the report is ran.
The web links refer to report builder and how to email from it. I am in a web environment that they select the report and its ran. Is this web form a standard product with Oracle for reporting?
I have seen how to do accomplish my task from the command line. Is this another way of accomplishing this task?
I think what I am also looking for is a confirmation that what I want to do is possible and that someone has accomplished this task before.
Thanks,
Chris

Excess time taken to schedule requests to the report server

Similar Messages

Maybe you are looking for