Failed to send a request to the message server

Please help me with the problem as below with Basis 6.5 / ECC5 , Windows Server 2003 / Oracle ( 9.2) environment
With Sick it says
Severe problems were detected during initial system check.
Please, do not use that system before fixing these problems.
when I run SM50
error: Update is not active
When I checked SAP MMC, i found   Msg_server stopped
I am getting following error log with SM21
04:44:28 DP                           Q0N Failed to send a request to the message server
04:44:28 DP                           Q0N Failed to send a request to the message server
04:44:33 DP                           Q0N Failed to send a request to the message server
04:44:33 DIA 01 020 SAPRFCBWP         EK1 Error found in PBT environment, FM = SPBT_INITIALIZE
04:44:33 DIA 01 020 SAPRFCBWP         EK4 > Failed to determine server information
04:44:53 DIA 01 020 SAPRFCBWP         AB0 Run-time error "MESSAGE_TYPE_X" occurred

Hi,
Seems to be a problem with your GUI as the dump MESSAGE_TYPE_X is generally related to GUI. Use some higher version of GUI than the existing one.
Also Updates are not active in your system. Use transaction SM13 to check whether updates are active or not. If not then use transaction SM14 to turn on the updates.
Regards
Sourabh Majumdar

Similar Messages

RegTask: Failed to send registration request message. Error: 0x80040231

Hi,
i am getting the below error ClientIDManager.log
RegTask: Failed to send registration request message. Error: 0x80040231
RegTask: Failed to send registration request. Error: 0x80040231
Error initializing client registration (0x80040222).
Please let me know how can i solve the error.
Regards,
Boopathi

Checked this ?
http://social.technet.microsoft.com/Forums/systemcenter/en-US/235b795b-442d-4d72-aff0-642d3714ee48/sccm-2007-sp2-mixed-mode-failed-to-send-reqistration-request-message-080040231
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Problem in sending HTTP request to the server.

Hi,
i dveloped an ant script for sar deployment.
i deployed a sar to my local soa server with ant script. it got deployed succesfully..
but when i try to deploy to a remote server, getting the below error..
"Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404"
but the server is up and runnig and i am able to ping it from my machine and also access the console...
below is my script
build.properties
wn.bea.home=C:/Oracle/Middleware
all.needed.jars.path=D:/SourceCode/neededJAR
oracle.soa.home=C:/Oracle/Middleware/Oracle_SOA1
java.passed.home=C:/Oracle/Middleware/jdk160_24
#Deployment environment
deployment.plan.environment=DEV
#Deploy Action
deployAction =redeploy
#credentials
user=weblogic
password=welcome1
#For Composite deployment
serverURL=http://10.177.154.6:7001
forceDefault=true
server=10.177.154.6
port=7001
sarLocation=D:/SourceCode/JAR
build.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="soaDeployAll" default="deployAll">
 <echo>basedir ${basedir}</echo>
 <property environment="env"/>
<echo>current folder ${basedir}</echo>
 <property file="${basedir}/build.properties"/>
 <taskdef resource="net/sf/antcontrib/antlib.xml">
 <classpath>
 <pathelement location="${all.needed.jars.path}/ant-contrib.jar"/>
 </classpath>
 </taskdef>
 <target name="init">
 <tstamp>
 <format property="timestamp" pattern="yyyy-MM-dd_HH-mm-ss"/>
 </tstamp>
 <property name="build.log.dir" location="${basedir}/buildlogs"/>
 <mkdir dir="${build.log.dir}"/> <property name="build.log.filename" value="build_${timestamp}.log"/>
 <record name="${build.log.dir}/${build.log.filename}" loglevel="verbose" append="false"/>
 <echo message="Build logged to ${build.log.filename}"/>
 </target>
 <target name="deployAll" depends="init">
 <echo>Deploy for environment ${deployment.plan.environment}</echo>
 <antcall target="deployAllComposites"/>
</target>

 <target name="deployAllComposites" depends="init">
 <foreach target="deployComposites" param="Files">
 <fileset dir="${sarLocation}" casesensitive="no" includes="*.jar"/>
 </foreach>
 </target>
 <target name="deployComposites" depends="init">
 <basename file="${Files}" property="basename"/>
<echo>Deploy Project ${basename} for environment ${deployment.plan.environment}</echo>
 <if>
 <equals arg1="${deployAction}" arg2="deploy" />
 <then>
 <echo message="Deploying composites in Managed server........." />
 <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
 <property name="serverURL" value="${serverURL}"/>
 <property name="user" value="${user}"/>
 <property name="password" value="${password}"/>
 <property name="overwrite" value="false"/>
 <property name="forceDefault" value="${forceDefault}"/>
 <property name="sarLocation" value="${sarLocation}/${basename}"/>
 </ant>
 </then>
 <else>
 <echo message="ReDeploying composites in Managed server........." />
 <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
 <property name="serverURL" value="${serverURL}"/>
 <property name="user" value="${user}"/>
 <property name="password" value="${password}"/>
 <property name="overwrite" value="true"/>
 <property name="forceDefault" value="${forceDefault}"/>
 <property name="sarLocation" value="${sarLocation}/${basename}"/>
 </ant>
 </else>
 </if>
</target>
</project>
please help....

Hi,
Give the serverURL as http://<host>:<managed.server.port>/soa-infra/deployer and try.
e.g . http://10.177.154.6:8001/soa-infra/deployer
Regards,
Neeraj Sehgal

Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
Does anyone know how to fix this?

What EXACT version of Photoshop CS4 are you running? You should be on Photoshop CS4 v 11.0.2.
Also run Apple's software update to see whether it offers you the latest Epson update:
Printer Driver v9.33
Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
MOST IMPORTANTLY: have Photoshop re-create its own Preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Error: "DoFunction fork failed" in the Messaging Server 3.x logs on Digital Unix or AIX

Receiving error message DoFunction fork failed in the Messaging Server 3.x logs
on Digital Unix or AIX.

The dxkerneltuner command is one way to raise the number of user
processes on Digital Unix. Steps follow:
<OL>
<LI>Login as root (or su to root) on Digital Unix and execute the
dxkerneltuner command.
An X-Windows window will pop up with a list of
kernel subsystems (tuning categories).

<LI>Double-click the "proc" subsystem.

A child window will pop up, displaying parameters in that category, along with
their associated values and limits. These should include parameters
named "max-proc-per-user" and "max-threads-per-user", which are by default,
64 and 267 respectively.

These should be replaced by values more
consistent with the Messaging Servers resource requirements. Provided
the default Messaging Server installation is used, more appropriate values
for these parameters would be 640 and 2560 respectively.

<LI>To implement
these new values, replace the value 64 with 640 for max-proc-per-user in the
child window and replace the value 267 with 2560 for max-thread-per-user.
<LI>Click OK on the child window and exit the parent window.
<LI>Reboot Digital Unix to implement the kernel changes.

I have bkp OD, trash server.app / reboot / install server.app again and working fine now.
Thanks !

How to send binary data in the message body

How can we send binary data in the message body that is base64 encoded? below are the requirements
Mime Header.
Mime-version: 1.0
Content-Type: application/octet_stream; name=test
Content-Transfer-Encoding: Base64
Submission must be named "test.sub" (lowercase)
Submission must be base64 mime-encoded
Submission must be sent in the body of the message (not as an attachment)
Only one submission per mail message
No other comments should be put in the body of the mail message (other than the submission)
I highly appreciate your help. If you can provide few examples, that will be very helpfull.
Thanks,
Madan

Use Message.setContent to set the content, or use Message.setDataHandler with
a DataHandler constructed with a ByteArrayDataSource. If the content is not
"naturally" encoded in base64, you can enforce it by setting the Content-Transfer-Encoding
header to "base64". Any reasonable mail reader won't care what encoding you use, as
long as the decoded data is correct.

Example Finder Error- unsuccessful in sending a request to the NI Helpserver

HI
I have got a problem with Example Finder and when I double click on an example I get this error after about 3 or 4 minutes.
An error occurred. The NI Example finder was unsuccessful in sending a request to the NI Helpserver
Wud u plz let me know what is the problem and how can I open the examples.
Solved!
Go to Solution.

Check this first: Error when opening NI Example Finder: The NI HelpServer could not be found
The intention there is to check the service and to make sure your firewall isn't blocking the port.
Also, check to see if any other NI services are disabled. If there are, turn them on one by one to see if that fixes the problem. You may have to restart LabVIEW after each attempt.

JDBC Sender channel not processing the messages

Hello,
From yesterday onwards JDBC Sender channel not processing the messages. In CC monitoring it is showing in Green Led and status is functioning. Cahnnel is polling for messages to DB server as per polling interval. But it is not processing the msg's. Under Processing detials for cluster node it is showing only "Processing Started" for each polling interval.
I have done the check in DB server by executing the query in the channel, whether there are any records are exisitng or not. There are 1000+ records.
Previously the parameter "Disconnect from DB after processing each message" was not set. I have set the parameter and activated in Productiion. Still the messages are not processing by channel
What was the problem? How to rectify with this.
Cheers
Veera

Check in the Visual Admin >Cluster> "LOCKING ADAPTER"
we get a option of Display Locks .Check for an entry with
NAME : $XIDBAD.JDBC2XI
reset the locks and restart the CC ,now it works fine.
Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S)

I can't send any pictures on the message application. It tries to send it but ends up saying "Not delivered and an !"

I can't send any pictures on the message application. It tries to send it but ends up saying "Not delivered and an !" How do I fix this?

See:
* [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon ([[Site Identity Button]]) on the left end of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the Media tab of the "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Client is not known to the message server

Hi,
I've search SAP Notes but could not find any answer to my problem. I am running 4.7 (620) on Ora 9i, Windows 2000 Advanced Server and kernel 155. We have 2 application servers and one DB server.
I get an error message every 5 minutes in the system log reading:-
Client PRD01PRD_00 is not known to the message server
Client PRD02PRD_00 is not known to the message server
This message translates in dev_w0 as follows:-
ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 16132]
ERROR => ThSysAdmMsg: ThAdmSend [thxxab.c 6903]
Please advise on a solution.

Dear Ferrandi,
this is an attempt to send an ADM message to a given instance. The problem is that the message server is not aware of such an instance. If you say that this happens every 5 minutes, it will be some kind of automatic job trying to speak to an instance not available in the system. I would suggest that you reset the trace files, then switch the trace level of the first three dialog work processes to 2 (components taskhandler, abap proc., and scrn. proc.) and then set the profile parameters
rdisp/TRACE_LOGGING = on, 10m
rdisp/TRACE_PATTERN_0 = ERROR => ThSysAdmMesg: ThAdmSend
so that tracing will stop as soon as the problem happens again. Do post the work process trace file that has the error message here or send it via mail to me so that I can check which report is being run.
Best Regards,
Tim

Most of the time, when I try to load the home page, I get the message server not found - now I get this message and can't go anywhere

I have dial up - once I connect to the internet, I get the message server not found and am unable to go anywhere on the internet. This started trying to load my banks online site and started about a week ago. I've tried freeing popup blocker, gone through the settings with a bank IT specialist, tried to us IE which has resulted in a request for a cable and now no access to any website. Any suggestions appreciated. Thanks

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program. 
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls

Excess time taken to schedule requests to the report server

I have a file which contains 10000 requests to be send to the report server. The total time taken by the report client to send the request to the report server is somewhere around 4 - 5 hours. Why does report client take so much time to schedule the request to the report server ????? How can i get around this problem, since the report execution doesn't start till the last request has been send since i am using schedule=<some_delay> and not schedule=NOW.

I have a file which contains 10000 requests to be send to the report server. The total time taken by the report client to send the request to the report server is somewhere around 4 - 5 hours. Why does report client take so much time to schedule the request to the report server ????? How can i get around this problem, since the report execution doesn't start till the last request has been send since i am using schedule=<some_delay> and not schedule=NOW.

Client PRD01_PRD_00 is not known to the message server

Hi,
I get a lot of user disconnects (SM21) and update deactivation (SM13). From the system log I get the following error. Are they related? How can I fix this?
Client PRD01_PRD_00 is not known to the message server
Client PRD02_PRD_00 is not known to the message server
Transaction Canceled BT 510 ( )
Perform rollback
Operating system call recv failed (error no. 10054)
Connection to user 24070 (BUCHANR ), terminal 112 (MB02159PC ) lost
Please advise

Hi Ferrari,
I have the same problem here.
Can you tell me how solution do you apply?
Best regards,
Marcelo Moraes

There was an error attempting to send your changes to the exchange server.

iCal will no longer sync with my work Exchange calendar.
I have deleted and added the account several times, but that is not working.
I was getting messages about specific events not being synced with the server, but now I get the following message:
"Calendar can't refresh with the account "RPD Exchange"
There was an error attempting to send your changes to the exchange server"
Any ideas?
Thanks.

Just hit this issue, with 10.10.2 Yosemite myself. Simple to fix. First Close iCal. Then go to system preferences and open internet accounts. Selected the Exchange account and turn off calendar. Closes System preferences. Now, from the finder, goto the GO menu, and hold down the option key. While holding down the option key, you will see "Library" appear. Click on this and it will open a finder window. Then go to directory named Calendars. You will see a file called, Calendar Cache. It should be a big file, depending on how much you have stored on your ical, maybe around 5 to 11 megs. Move it to the trash can. Then restart iCal. iCal will crash the first time you open it due to the missing cache file. Just hit ok and reopen it. At this point iCal will reload all you accounts. This can take a couple of minutes depending on how much info is there. Most of the time you Exchange account will reload by its self, but only after all the iCloud events are rebuilt. After iCal is back up and running go back to System Preference and make sure Exchange calendar is on. Most of the time it will turn on by it's self. Best of luck.

Why do i get the message server error when trying to restore my icloud backup i dont know if my backup was completed

hi can anyone tell me why the message server error shows
i did a icloud backup and have not been able to see if it was completed
i now have a replacement iphone and want to know how i get the files back
please help

Hi there n@nnydee!
I have an article for you that will give you some steps to go through in order to troubleshoot this issue with restoring from your iCloud back ups. The article can be found right here:
iCloud: Troubleshooting restore issues with iCloud Backup
http://support.apple.com/kb/ts4036
Thanks for using the Apple Support Communities!
Cheers,
Braden

Failed to send a request to the message server

Similar Messages

Maybe you are looking for