Exchange 2010 Create new folder for select users off the root of the mailbox

I need to create a new folder for a select set of users. This folder needs to be off the root of their mailbox. I considered using a custom managed folder but we do not have the enterprise CAL’s to support this option. I only have
about 15 users so I could do this one by one if needed. I am not a powershell user but have been using the Exchange Management Shell and would like to us this app to create the folders but I’m not finding the right syntax for the new-mailboxfolder cmdlet.
What is the correct method for using the EMS to create a new folder in a mailbox.

I was checking back thru my notes and seem to remember running this cmdlet:
[PS] C:\Users\administrator.STOUSE\Desktop>get-mailboxPermission | FL
cmdlet Get-MailboxPermission at command pipeline position 1
Supply values for the following parameters:
Identity: administrator
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess, ReadPermission}
Deny : False
InheritanceType : All
User : STOUSE\administrator
Identity : STOUSE.com/Users/Administrator
IsInherited : False
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess}
Deny : False
InheritanceType : All
User : STOUSE\StouseSA
Identity : STOUSE.com/Users/Administrator
IsInherited : False
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess}
Deny : True
InheritanceType : All
User : STOUSE\Domain Admins
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess}
Deny : True
InheritanceType : All
User : STOUSE\Enterprise Admins
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess}
Deny : True
InheritanceType : All
User : STOUSE\Organization Management
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess}
Deny : True
InheritanceType : All
User : STOUSE\administrator
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess}
Deny : False
InheritanceType : All
User : STOUSE\Exchange Servers
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess}
Deny : False
InheritanceType : All
User : STOUSE\Exchange Domain Servers
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {ReadPermission}
Deny : False
InheritanceType : All
User : STOUSE\Organization Management
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {ReadPermission}
Deny : False
InheritanceType : All
User : STOUSE\Public Folder Management
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess}
Deny : False
InheritanceType : All
User : NT AUTHORITY\SYSTEM
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {ReadPermission}
Deny : False
InheritanceType : All
User : NT AUTHORITY\NETWORK SERVICE
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {ReadPermission}
Deny : False
InheritanceType : All
User : STOUSE\Exchange Servers
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {ReadPermission}
Deny : False
InheritanceType : All
User : STOUSE\Exchange Domain Servers
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {ReadPermission}
Deny : False
InheritanceType : All
User : STOUSE\Delegated Setup
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
Deny : False
InheritanceType : All
User : STOUSE\Organization Management
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
Deny : False
InheritanceType : All
User : STOUSE\Exchange Trusted Subsystem
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
Deny : False
InheritanceType : All
User : STOUSE\Exchange Services
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
Deny : False
InheritanceType : All
User : STOUSE\administrator
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
Deny : False
InheritanceType : All
User : STOUSE\Enterprise Admins
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged
RunspaceId : d01ba29d-0e43-45eb-a245-91d19f698bf8
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
Deny : False
InheritanceType : All
User : STOUSE\Domain Admins
Identity : STOUSE.com/Users/Administrator
IsInherited : True
IsValid : True
ObjectState : Unchanged

Similar Messages

Create new folder with selected items

I have a bunch of movies that I would like to place into individual folders of the same name (Without the extension name). I wanted to try and create a keyboard command to do this with the selected files, but can't manage to figure out how!
What I did was try to create a new service command in automator, then went to keyboard shortcuts in system preferences to assign a keyboard command to it.
I want to make something that works like control-command-n (to create new folder from selected items), only I want the items to be in individual folders of the same name.
eg.
Files selected such as:
The incredibles.avi
Cinderella.mkv
Dogma.mp4
each moved into individual folders labeled as:
The Incredibles
Cinderella
Dogma
Also, is there a way to change the control-command-n shortcut so it can create a new folder from a single item? It only works when there is more than one file selected.
Thanks so much for any help!

I am going to guess that you start off with a single file - what are you doing to generate these files? My *Get Names of Finder Items* action can get a name to use in the *New Folder* action - items passed to the New Folder action will get copied to it, so a little more detail may help in creating the workflow.
The *Dispense Items Incrementally* action can also be used to dole out the items one at a time - knowing what the workflow is doing would help with the use of this action as well.

Creating an shortcut for all users on the desktop

I want to create a shortcut for all users on the desktop that will appear for all users that login to the computer. How is this done in Windows 7? In Widows XP this was done at the "All Users" profile, but I cannot find such a profile in Windows 7.

the users have windows vista , 7 or 8 have a chortcut i created and the users have windows xp isn't created on them desktop
Do you have a question? If so then your best bet is to create a new post (this one is 5 years old and marked as "answered"!) and spell it out there.

Create new tag for selected text using API?

Hello,
I want to add new tag for the selected text just like 'Create Tag from selection' .
is it possible to create tag for selected text using acrobat api?
     please,help me.

As per sample of snippetRunner for adding tag for selected text.
I tried below code
PDPage pg;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pd = AVDocGetPDDoc(avDoc);
    pg = PDDocAcquirePage(pd, 0);
ASAtom theSelectionType = AVDocGetSelectionType(avDoc);
if (theSelectionType == ASAtomFromString("Text")){
    PDTextSelect ts = static_cast<PDTextSelect>(AVDocGetSelection(avDoc));
    PDSTreeRoot pdsTreeRoot;
    CosObj pageObj = PDPageGetCosObj (pg);
    PDSElement newElem;
    PDSElementCreate(pd, &newElem);
    char buf1[64];
    strcpy (buf1, "A new structure element");
    // set its type as "Document" standard type
    PDSElementSetType(newElem, ASAtomFromString ("Document"));
    // set its title
    PDSElementSetTitle(newElem, reinterpret_cast<const ASUns8*> (buf1), strlen(buf1));
    PDSTreeRootInsertKid (pdsTreeRoot, aElem, kPDSAfterLast);
    PDSElementInsertMCAsKid // here something i have to add
If i have PDTextSelect how i can add tag for selected text.like user add tag using "CreateTagForSelectedText" option.
please,help me.
thanks.

Step 20 - Create new connection for NORTHWIND user, Northwind - Migrated

Hello,
I am migrating the Northwind database from Access to Oracle, and I am following the directions, but when I get to step 20, create a new connection for the Northwind User, Northwind - Migrated, I cannot create the connection. After running the converted model script that was generated by the workbench -- I don't see the Northwind - Migrated database. So how can I create a connection to it?
Also -- after I ran the script, I did not see any messages in the log showing I ran the script, but the status bar at the bottom of the tool said script finished..... I am confused.
Thanks!
Jeff

Anyone have this same issue trying to migrate the Northwind database to access using migration workbench?
Thanks so much,
Jeff

Is it possible to automatically create new folder for each project?

Hi! Here´s another (maybe stupid) question:
I wonder if it's possible for Premiere to also automatically create a new folder on the harddrive when a new project is created. This to get all material, preview files etc for each project in a separate folder.
It´s easy to forget to manually do this and I tend to end up with many projects and files in the same folder. Makes it hard when I want to "clean house" and delete some stuff and backup other.
Thank's for any help with this!

Everyone develops their own method of project organization,
but this has worked for me through several versions of Premiere.
I keep a 'Project Template' folder that contains all of the sub-directories
that I will normally need for each job... Media, Approvals, Documents, Audio,
Rendered Image Sequences, Still Images, Finals etc.
This 'Project Template' folder also contains a template Premiere project that is
pre-set with the interface settings, column layout and project folders I will always use...
Audio (vo, music, sfx), Graphics (sequences, stills, titles, slates),
Cuts (approval versions, finals, and broadcast distribution finals).
When I start a new project I simply duplicate the entire 'Project Template' folder along
with all of its contents, then rename the folder and Premiere project to suit the current job.

How to create new check for SELECT* , Naming conventions etc..

Hi all,
   I would like have a solution for the below checks are possible or not in ABAP - CODE INSPECTOR. If possible can you please give me the solution..
a). Performance checks i.e, SELECT* , LOOP without field strings, FOR ALL ENTRIES IN SELECT STATEMENT.
b). Custom naming conventions.
c). to check if further modularization can be done in the program,
d). also the coding standards.
PLEASE help me , i am struck with it for long time in getting the solution...

> a). Performance checks i.e, SELECT* , LOOP without field strings, FOR ALL ENTRIES IN SELECT STATEMENT.
> b). Custom naming conventions.
> c). to check if further modularization can be done in the program,
> d). also the coding standards.
the code inspector allows the creation of new checks, you should consult the documentation how to do it.
The main problem of the code inspector are hits, which are actually no problem. And I think this is a problem with your checks:
+ SELECT* this is no performance problem, only in cases when the table is really wide then a field list makes sense, i.e your check
   will find a lot of false hits
+ LOOP without field strings ... you mean fs =field symbols, same as with SELECT *
+ FOR ALL ENTRIES IN SELECT STATEMENT   ???? FOR ALL ENTRIES is fine
+ Custom naming conventions ... hmmm be more precise, I think it can be hard
+ to check if further modularization can be done in the program,
    before you want to program can you please explain how you check manually .... I would be interested
+ also the coding standards.   .... what is that?

Do I can create a page who is locked just for selected user?

Do I can create a page who is locked just for selected user?

The manner how you put files on the server is unimportant.
It's the Webserver (usually Apache) itself that does the protecting.
So either use the control panel where you host your website, or use the method explained on the page I linked to.
Should look like this (on the left) :
Your visitor will see this :
http://home.wyodor.net/protect/
Use : root/root
Inside it looks like this :

Create new session for each window opening

From a jsp page i open a page called student.jsp by clicking on students admision no.Therefore lots of pages can be opend in new windows with relevent student details.
but when i click on the link i called a servlet, get relevent details and redirect to student.jsp. The problem is ,all opened windows have same session id and there are session conflicts.
How can i create new sessions for each page thru the servlet or is there any other alternatives

I actually was working on a problem that was similar to this, and the problem is with how each web-browser works with sessions...
Each browser window (Except in one case with IE) will use the same session in each window.
However, you might be able to use URL-Rewritting to manage your sessions and get around using cookies for for session tracking. I personally haven't tried this, but I'm betting that it will work.
Best of Luck,
Nate

Cannot create new folder?

I have just moved to a new hosting and have connected to it
and I can edit files. When I try to add a folder to the remove I'll
get
"An FTP error occured - cannot create new folder .
Access denied. The file may not exist or there could be a
permission problem".
Any idea?

Hi,
Did you make any changes before the issue appears?
Before going further, you may try the
system restore to go back to a previous status and check the result.
Tracy Cai
TechNet Community Support

I need to create a NEW folder for bookmarks, not add to an existing one. I've been looking for over 2 hours and can only find the latter. Also, if possible, I'd like to remove a redundancy on my Bookmarks Toolbar. Thank You!

I am working on many projects and my bookmark folders suffice. I need to create new folders, but not "Smart Folders." After over 2 hours, I keep coming back to the same description of how to add new folders to existing ones. NOT what I want to do. This used to be easy, but the set up must have changed as I've been trying to do this all day with no success.
Also, somehow my gmail inbox appears twice in my bookmarks toolbar. Again, I am finding information that does not apply to me in help and former question files and links. How do I remove things from my bookmarks toolbar?
Thank you and PLEASE, oh Please e-mail the answer to me as I seem to have problems with your site.

Open the Bookmarks Library, to do that in the Bookmarks menu select "Organize Bookmarks"
In the Bookmarks Library, in the left hand pane click on "Bookmarks Toolbar" to select it, now in the Organize menu select "New Folder".
If you have the capability to right-click, you can also right-click on the Bookmarks Toolbar and select New Folder.
ps Questions on this forum are normally answered by volunteers, and for privacy reasons many will not be willing to send emails. You have also not shown your email address.

Unable to properly create new folder at the root level of exchange account

Using the latest version of Mail in OS 10.6 with an exchange server. Creating a subfolder within existing folders works perfectly. However, if I try to create a new folder at the very first level of hierarchy (directly under the inbox, not within an existing folder) it will not be created in the same location as my other folders. What will happen is, the folder will be created at the very bottom of all of my mail folders in an area that is labeled with the name of my exchange mailbox. This will be an area that only has folders that I created from within Mail on the Exchange server. All other exchange folder will be seen in the "Mailboxes" area directly underneath the exchange inbox.
FYI if I go into my exchange mailbox in a web browser and create a new folder directly underneath the inbox and then sync Mail for OS X, the folder will appear in the appropriate area. The issue only occurs when creating a new folder under the Inbox from within Mail.
Any solution here? My office is thinking of switching more computers from windows to mac, but we all run on Exchange and a glaring bug like this would make me think twice about rolling over to Mac for our office.

Start at http://www.microsoft.com/mac/search.mspx?qu=exchange+server

Access Denied for creating new folder

Hi friends,
When i tried to create a new folder under shared folders in catalog as a weblogic user, i couldnt get a option for creating new folder. But i have that option enabled in the My folders area.
Im not sure why the create folder option is not enabled for the weblogic user in the shared folders.
Im on OBIEE 11.1.1.7 and for a workaround i referred the below link
https://forums.oracle.com/thread/2520389
But i followed the steps mentioned in the above link, but not succeeded still facing the same create folder privilege issue under the shared folders for the weblogic user.
Kindly suggest me your approach for solving this issue.
Thanks
Regards,
Saro

Hari,
Restart the services (weblogic and BI) you should see it I have observed same kind of behavior in 11.1.1.7.0 (Admin tab missing and No Permissions icon for weblogic user) dont know exact reason
Restart is not a solution but will see if you are able to see or not
Thanks,
Saichand

How do I create a new Folder for each test report based on Serial number?

I want to be able to create a new folder for each test report based on serial number. Each time a UUT is tested, I want the report to go to the appropriate folder. What is the best way to do this?
Thanks

Hello Tman,
This is a slightly tricky question. The reason being, the report options like the report path etc, are set before you see the serial number prompt when you run your UUT. There might be other ways of getting around this, but a quick solution would be modifying the process model.
I modified the PreUUT callback to set the report options. I passed the reportOptions as a parameter to this sequence. In the PreUUT sequence, I set the following fields:
Parameters.ReportOptions.GeneratePath=False
Parameters.ReportOptions.ReportFilePath= "c:\\"+ Locals.SerialNumber +"\\report.xml"
I hope this would give you an idea.
SijinK

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

Look at it this way: there is no need to record that effect onto the audiofile. This is a great advantage of modern recording, and this is how most DAW's work by default. Just leave the plugin on when playing back.
Only for CPU management reasons it may be advantageous in certain situations to either freeze a track or bounce it in place (both techniques will render an audiofile that may include the effect). But in general it is a (very) good thing that it is possible to tweak any effect after recording, and have a clean, unprocessed recorded signal to work with. And if the effect was perfect at the time of recording, well, just leave the plugin(s) engaged.
http://help.apple.com/logicpro/mac/10.1/#/lgcp8ae5826e
http://help.apple.com/logicpro/mac/10.1/#/lgcpf1cbfd51
ps: there is a way to record plugin effected signal live into the audiofile, but it involves creating a custom environment setup.

Exchange 2010 Create new folder for select users off the root of the mailbox

Similar Messages

Maybe you are looking for