Exchange 2010 invites in ical show with floating timezone and incorrect time

When I receive exchange 2010 invites sent via email as an ics attachment and open them to add them into ical the time zone shows as floating and the event time is incorrect as it doesn't take the time zone into consideration. How can I change the time zone/ time for these events?

Well seems that its sad that no-one from Apple or otherwise knows why Apple Mail and iCal are such junk - but I'll answer for those who might want to know what solves these things.
In a nutshell - I removed my accounts from iCal and Mail - added things thru iCal and had it create the account in Mail automatically (Exchange 2010 has all my mail up online anyways) - and sure enough this fixed things.
Guess doing the Mail separately from iCal doesn't work right. Go figure.

Similar Messages

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
CRM Advisor

Exchange 2010 public folder not showing on exchange 20003 mailbox

Hi,
I have public folder on exchange 2003 and separate public folder on exchange 2010. On exchange 2010 user mailbox, I can see both 2003 and 2010 public folders. On exchange 2003 user mailbox, I can only see 2003 public folders. It is not the permission issue
as I have given the user "owner" right and see not able 2010 public folder inless i move 2003 user mailbox to 2010 exchange.
Appreciate if anyone could help me if to point me to directions or any hotfix I can run?
Thank you very much.
Pwint

Are you using OWA or Outlook to view the public folders?
If you're using OWA, the reason you can't see the folders is that OWA in Exchange 2003 uses WebDAV, which is no longer present in Exchange 2010.
If you're using Outlook, you'll need to use the troubleshooting logs to determine the cause of the problems.
It could be related to Outlook trying to connect directly to 2010 mailbox server instead of CAS. Because normally the mailbox server is installed without the CAS role, it does not allow a direct Outlook connection. Or it could be something else,
like authentication.

How do create a slide show with both video and photos in elements 12

how do create a slide show with both video and photos in elements 12

Hi Brian
You can batch process a set of prepared slides from Full Edit (see image) using:
File >> Process Multiple Files
In the PMF dialog you can choose filename, date, or description (caption)
Make sure you choose a separate destination folder to your source folder so as tot to permanently overwrite your originals.
Click image to view

Appointments received showing one hour forward and Reykjavik time zone

My appointments received are showing one hour forward and Reykjavik as the time zone. When I check them on my outlook desktop they are the correct time. I've checked my time zone ans settings on my z10 and they are correct. I can correct them using edit on the phone but don't want to have to do this each time. Am I missing something?
I saw a post from another time zone which said it was a bug that the developers were working on and a work around was to alter the time zone on the phone by an hour but surely this would alter the time on the phone?

I have tried the same BES installation with an Exchange 2010 Server. No problem with the time zone there.
I have testet an 10.1. Smartphone with Exchange 2003. No problem. All of our 10.2 devices have this problems. On two of these devices the sync of the caleneder has stoped completely. Im now searching for a was back to 10.1 on the affected blackberry devices.
Any hints are welcome

Client sometimes shows 'In a Meeting' and other times just 'Busy'

Client sometimes shows 'In a Meeting' and other times just 'Busy'.
Any ideas what might be causing this?

Lync user can get calendar data from Microsoft Exchange Server.
If you schedule a meeting or accept the meeting, the presence can change to “In a meeting” when the meeting starts.
The busy presence can be displayed when you use keyboard or mouse frequently.
For the details, you can check the document Chapter_06_Enhanced_Presence.doc at
http://www.microsoft.com/en-in/download/details.aspx?id=22644
Lisa Zheng
TechNet Community Support

My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My macbook is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page what do i do?

My macbook Pro is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page with language select what do i do? Also i dont have enough monet to go to the apple store to get it fix and another thing this happen after i tried to factory reset it without the disck uising coomans i found on youtube.Lastly befor doing the comands my macbook would open any applications and the finder would just blink on and off on the dock.
Heres the link http://www.youtube.com/watch?v=Q5e5thk0O9o

Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Leopard - This will install a "fresh" copy Leopard without archiving old system files but leaves the rest of your files in place.
If you still want to restore your computer to factory level...
Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
To restore read the instructions in the Mac OS X v10.5 Leopard - Installation and Setup Guide PDF

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

Bios update failore with black screen and 3 time flashing, my product name is (Pavilion g6-2162se) .

Hi
I have Hp Laptop, my product name is (Pavilion g6-2162se), I downloaded The drivers from the page, when I installed all drivers, the bios updatede to, but its failore, and now my computer not working means with black screen and 3 time flashing .
please help

Hi,
Check if this helps:
Restoring the BIOS
If it is blinking 3 times it usually indicates memory issue..So you can try reseating the memory modules or try one memory at a time in each slot..
Refer the links below:
HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
Removing and Replacing a Memory Module for HP Pavilion g6-2000, g6-2100, g6-2200 and g6-2300 Noteboo...
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Issues with Lotus to Exchange 2010 Invites

Hello,
I am having an issue with 1 or 2 users that happens when they are cc'd on a meeting invite from lotus notes. When these users are CC'd on an invite, the invite goes directly to the deleted items. I have checked for any rules in Outlook and did not see any
rules for these users at all. I also checked them using OWA and there were none. This happens even if Outlook ios closed and the user is only logged into OWA. The first user that experienced this is not using a mobile device at all for accessing email so it
does not appear to be related to a mobile device. We noticed this began right after migrating the user from Exchange 2003 to Exchange 2010, and believe it is related to that.
Thank you
Travis Van Ness

Hi,
Since it's an issue which seems more likely related to Exchange, we'd better post this question in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
Before that, we can still check some settings on Outlook to see if that may be related. Please try the following steps:
Microsoft Outlook 2007
From the Tools menu, select Options.
Select the Preferences tab.
Select the Email Options button, and then select the
Advanced Email Options button.
Make sure the Delete meeting request from Inbox when responding checkbox is not selected.
Select the OK button on the three dialog boxes to close them.
Microsoft Outlook 2010 & 2013
Click the File tab, then Options, and then select
Mail.
Under the Send messages heading, make sure the Delete meeting requests and notifications from Inbox after responding checkbox is not selected.
Click the OK button to close the dialog box.
Hope this helps.
Regards,
Melon Chen
TechNet Community Support

Exchange 2010 - 2013 Mailbox move - Syncing with no progress (Stalled?)

I'm in the process of moving mailboxes from Exchange 2010 to Exchange 2013, the major of the mailboxes have moved successfully, however I did not anticipate the additional space required by Exchange 2013 and ran out of disk space during the mailbox move,
and some mailboxes did not move successfully.
I have since added additional space but can't seem to get the remaining mailboxes to sync.
I have tried :
Rebooting
Clearing out migration batches and recreating
Stopping and resuming batches.
I see nothing helpful in the Migration log files.
2013-05-20T23:59:57.904Z,14,MigrationServicelet,Information,",827890ff-522d-4c13-9f42-96fbfefb57f4,,","Job type ExchangeLocalMove, status SyncStarting, result Working, length 0.2724593, job :827890ff-522d-4c13-9f42-96fbfefb57f4:ExchangeLocalMove:Staged:4::SyncStarting:2013-05-17
2:59:12 PM::"
When I download the report for one of the users I see this, but don't know what it means :
The job is currently stalled due to 'Content Indexing' lagging behind on resource 'CiAgeOfLastNotification(Mailbox Database 2065686096)'
For one of the other users the downloaded report only shows :
2013-05-16
2:11:18 PM '' created move request.
DWW
Additional Info: I followed the info located here in regards to creating the ContentSubmitters group:
http://www.bullspit.co.uk/2013/04/08/exchange-2013-content-indexing-during-migration/
My mailbox database currently has Content index state: FailedAndSuspended
I only have one database, I am not using DAG

I had already created the contentsubmitters and it helped with the speed of the mailbox moves. We have a SMB with >100 users and everything was working great, migrating from 2007 to 2013. If I had it to do over, maybe it would have been better
to go to 2010 on a 2008 R2 box but decided to jsut go straight to 2013 on a 2012 R2 server. But the one thing I REALLY wish I had to do over again is to allocate about 3 times more space to the drive that was to hold the mailbox database. Everything
was working so well until a mailbox was being moved - a batch of several, I was doing maybe 5 at a time for the larger mailboxes - the disk filled up. Also, before I realized what was going on, I ran some cmdlets thinking my receive connectors weren't
right. I recovered the database - at first it would not mount at all... but after eseutil /r and /p (and allocating more disk space) I could mount the database and open the mailboxes. But from then on, nothing is being received and if you send,
it goes to sent items - doesn't hang in outbox, but never goes anyhere except into a queue. I have MS support working on it and it's been escalated to the top. If they fix it I will try to post any helpful information I can learn from it. But one
lesson - I will read the planning and preparations documentation thoroughly from now on.
Oh, and also, I keep getting this message in the ECP when navigating to the Recipients>migration applet:
Cannot open mailbox /o=<Organization>/ou=Exchange Asministrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/CN=<yourExchangeserver>/cn=Microsoft System Attendant.
If you did the same thing, (and didn't hang yourself or jump in front of a speeding locomotive), you are stronger than I. Not that I have taken the path of the Samurai network admin or anything....
And if you were able to fix it, I am impressed and would love to know how you fixed this.
Thanks and best,
Sam

Rollup 8 for Exchange 2010 SP2 causes EWS error with bad parameter for Exchange.MailboxReplicationService.ProxyService

When I installed Rollup 8 for Exchange 2010 SP2 it caused an error in EWS
EWS failed with the error:
exchange web service could not load file or assembly Exchange.MailboxReplicationService.ProxyService bad parameter
When I uninstalled the rollup all worked fine again.
Any ideas, Thanks in advance?

Hi,
To apply this update rollup, you must have Exchange Server 2010 SP2 installed. And remove all interim updates for Exchange Server 2010 SP2 before you apply this update rollup. Please check your installation deployment by the following article:
Install the Latest Update Rollup for Exchange 2010
http://technet.microsoft.com/en-us/library/ff637981.aspx
Description of Update Rollup 8 for Exchange Server 2010 Service Pack 2
http://support.microsoft.com/kb/2903903/en-us
If all requirements and preparations are configured properly, please collect your error logs to check your installation. It would be helpful to post some event logs here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Exchange 2010 - How can add a meeting room resources and make it available to users to view and book a room

Hello,
I need to setup a group of meeting rooms in Exchange to enable (approx 300) users to view and book rooms.
I would be very grateful if anyone has a step by step guide they can share with me.
Many thanks !

http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/resource-mailboxes-exchange-2010-part1.html
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Making a Slide show with Video, Pictures, and Music

Hi,
I'm putting together a slide show with music containing music, narration, pictures and video shot from different cameras…would like to export in the best quality i can…
What formats:
o Pictures
o Video
o Audio
o Narration
along with:
Codecs
Compressions
Are best used with FCE?

Thanks very much for your response...one of the cameras used was a Sony HDV U1000...I believe it was shot 1080i..couldn't tell you what other cameras were, but I'm pretty sure they weren't HD cameras...just trying to help a buddy edit his project, but it seems the formats are all over the place....Trying to convert the sources so we can output a good product...I would probably use iDVD to make the DVD...I've made some videos for another friend using my Sony VX2100 and they look awesome...
Thanks again for your help, it's very appreciated!
Curt Casassa

Exchange 2010 invites in ical show with floating timezone and incorrect time

Similar Messages

Maybe you are looking for