Exchange 2013 Sp1 Coexistence with Exchange 2010 SP3 CU5 HTTP 500
I`m trying to make working OWA coexistence between Exchange 2013 SP1 and Exchange 2010 SP3 CU5.
When user login in to OWA where his mailbox is located on Exchange 2013 server it logon successful and owa opened. When i try to login to the same url with user whose mailbox is located on Exchange 2010 server i get Error http 50
The website cannot display the page : HTTP 500 »https://URLEXCHANGE2013/owa/auth.owa«
The same is, when i use https:// URLEXCHANGE2013/ecp?ExchClientVer=14
URL on Exchange 2013 are different as fro Exchange 2010.
I even tried to setup Internal URL for Exchange 2010 to bi set to »null ,Saem error
Exchange server 2013 Sp1 is installed on Windows server 2012 R2.
Assumption is correct. I have even enable verbose logging, and i can see MSExchange Front End HTTP Proxy , that successfully connect to Exchange 2010 server.
But remember Exchange 2013 is fresh installation on Windows server 2012 R2.
IIS LOG
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=391fd8b3-2b98-494a-8812-d38feda2e5a0&cafeReqId=391fd8b3-2b98-494a-8812-d38feda2e5a0;
443 companyNT\SM_9c071c4922fd420fb fe80::99d1:f542:a4d3:b469%12 MSRPC - 200 0 0 5484
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=27cfafa2-8224-4563-918b-0b228c6ee8d4&cafeReqId=27cfafa2-8224-4563-918b-0b228c6ee8d4;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 0
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=6d930bcd-7bbc-415a-a25a-8d6488e91401&cafeReqId=6d930bcd-7bbc-415a-a25a-8d6488e91401;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 15
2014-03-04 08:52:55 10.1.0.36 GET /owa/ &CorrelationID=<empty>;&cafeReqId=551cfdd9-18ac-42d8-aea3-cbb546c9d9fb; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/
302 0 0 9937
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fOWA.company.com%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c1b97df9-ec56-4906-b2f5-965551b720ae; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
https://OWA.company.com/ 200 0 0 1015
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f&CorrelationID=<empty>;&cafeReqId=b92ca682-04f4-4d4f-931e-9a95680ab9ea; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
- 200 0 0 671
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=093bd01a-de59-4519-80f6-067484122091; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c2f7565d-ee6a-48f8-8d86-16d5d3ca65c1; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=ba633030-2376-4bad-a32f-8f160bd87bd4; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=5e94172c-d97c-46a9-a602-6030d6f7da2c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fEXCH2013%2fecp%2f&CorrelationID=<empty>;&cafeReqId=9ba2caf3-2a03-44a2-8477-2724689e139c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 46
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/15.0.847/scripts/premium/flogon.js &CorrelationID=<empty>;&cafeReqId=62bb4655-3bfa-4e07-aa62-27c93e7e8b4d; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:59 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=9d52ec1a-2ee1-4954-85e6-89e7e5df407a; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 302 0 0 812
2014-03-04 08:52:59 ::1 GET /OWA/Calendar/[email protected]/calendar/calendar.html &CorrelationID=<empty>;&cafeReqId=4ea66475-9a47-41a4-81cb-6b569715d0d6; 443 - ::1 AMProbe/Local/ClientAccess - 200 0 0 8859
2014-03-04 08:53:01 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=b3db7480-2192-436c-b01d-29d0e528cfec; 443 UseronEX2010 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f
500 0 0 187
2014-03-04 08:53:04 127.0.0.1 GET /Microsoft-Server-ActiveSync/default.eas &CorrelationID=<empty>;&cafeReqId=2e2a655b-00b9-42ae-8789-1e452e6579c3; 443 [email protected] 127.0.0.1 AMProbe/Local/ClientAccess
- 200 0 0 8265
2014-03-04 08:53:14 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=8741886f-b9b1-46f9-8c15-baf35809a12c; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 15265
2014-03-04 08:53:14 127.0.0.1 GET /OWA/auth.owa &CorrelationID=<empty>;&cafeReqId=8ad938fb-f2c3-42bf-8718-da62b122422c; 443 - 127.0.0.1 AMProbe/Local/ClientAccess - 302 0 0 15
HTTPERR LOG :
2014-03-04 08:51:48 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:51:48 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:30 127.0.0.1 14122 127.0.0.1 443 HTTP/1.1 GET /RPC/[email protected] 404 - NotFound -
2014-03-04 08:52:30 ::1%0 14121 ::1%0 443 HTTP/1.1 GET /ecp/ReportingWebService/ 404 - NotFound -
2014-03-04 08:54:42 ::1%0 14117 ::1%0 444 - - - - - Timer_ConnectionIdle -
2014-03-04 08:54:48 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:54:48 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
Trace login, ok it is xml, so print is..
-Request Summary
Site
1
Process
8232
Failure Reason
STATUS_CODE
Trigger Status
500
Final Status
500
Time Taken
500 msec
Url
http://EXCH2013.companyNT.local:80/powershell?clientApplication=ActiveMonitor;PSVersion=4.0&sessionID=Version_15.0_(Build_846.0)=rJqNiZqNgZuQkpqT0pqH0ZuQkpqTkYvRk5CcnpOBzsbLzsbGyczJyIHPzNDPy9DNz87L38/Gxc/KxcrJ
App Pool
MSExchangePowerShellFrontEndAppPool
Authentication
Kerberos
User from token
companyNT\SM_9c071c4922fd420fb
Activity ID
{8000134C-0001-E300-B63F-84710C7967BB}
-Errors & Warnings
No.↓
Severity
Event
Module Name
157. view trace
Warning
-MODULE_SET_RESPONSE_ERROR_STATUS
ModuleName
ManagedPipelineHandler
Notification
EXECUTE_REQUEST_HANDLER
HttpStatus
500
HttpReason
Request Failed
HttpSubStatus
0
ErrorCode
The operation completed successfully.
(0x0)
ConfigExceptionInfo
ManagedPipelineHandler
See all events for the request
Similar Messages
-
Exchange 2013 EAC coexistence with Exchange 2007
Dear All,
I have an exchange organization comprized of single Exchange 2007 SP3 UR 15 running on Win2008 SP2 and two recently installed Exchange 2013 SP1 CU7 with CAS and Mailbox role running on Win 2012 R2.
Imidiantly after Exchange 2013 install, I am not able to login to Exchange 2013 EAC. When I enter my credentials domain\username, the EAC page simpli dose a quick refresh and I am back where I started.
I have tryid mutiple UTLs to access EAC page, such as:
https://localhost/ecp?ExchClientVer=15
https://localhost/ecp?ExchClientVer=14
https://localhost/ecp
Each of them show the same result, a page gets refreshet. I have tryid to move my Exchange Organization user mailbox to Exchange 2013 to see if that helps but the result.
I also noticed that OWA dosent work for mailboxes that are on Exchange 2013, they are redirected to Exchange 2007 even thou they are on Exchange 2013.
Any idea on this one?
Thank you
b.Hi,
From your description, I would like to verify if you have configured Exchange 2013 namespace and virtual directories (such as OWA, ECP, OAB, Web Services, AutoDiscover)correctly. Please make sure these virtual directories are configured correctly and check
the result.
For more information about Exchange 2007 migration to Exchange 2013, here is a helpful blog for your reference.
Step-by-Step Exchange 2007 to 2013 Migration
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-2-step-by-step-exchange-2007-to-2013-migration.aspx
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Exchange 2013 co-existence with Exchange 2010 proxying issue.
Hello,
I am testing Exchange 2010 and Exchange 2013 co-existence in my test lab at the moment, with
a view to migrating our production environment to 2013 later in the year.
The lab is setup, and the problem I'm having is that internal Outlook clients cannot open
their respective mailboxes once the 2013 CAS server is introduced into the mix.
The
setup is listed below:
EXCHANGE 2010 Servers
TESTLABEXCH01 - CAS,HT,MBX - Exchange 2010 SP3
TESTLABEXCH02 - CAS,HT,MBX - Exchange 2010 SP3
Both servers are part of a CAS Array - casarray01.testlab.local
Both servers are part of a DAG - DAG01.testlab.local
RpcClientAccessServer on all 2010 databases set to casarray01.testlab.local
The A record for casarray01.testlab.local points to the IP of the VIP of a load balancer.
The loadbalancer serves
the following ports: 25,80,443,143,993,110,995,135,60200,60201
OutlookAnywhere is enabled on both servers:
ClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm}
Internal and external mail flow works without issue before the 2013 server is introduced.
Internal and external client access works without issue before the 2013 server is introduced.
Part Two to follow.....
MattEXCHANGE 2013 Servers :
TESTLABEXCH03 - CAS,MBX - Exchange 2013 SP1
OutlookAnywhere is enabled on the server:
ClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm}
RpcClientAccessServer on all 2013 databases set to casarray01.testlab.local
(This an inherited setting I assume from the pre-existing 2010 organization)
Split DNS is in place and all internal/external URL's point to either:
autidiscover.external.com
mail.external.com
The A record for the mail.external.com points to the IP of the load balancer VIP
The CNAME record for autodiscover.external.com points to mail.external.com
When the TESTLABEXCH03 is added to the load balancer config,
and given highest priority this is when the Outlook clients stop working.
Any existing profiles in Outlook 2010/Outlook 2013 can no be opened as there is a persistent
credentials prompt.
Upon trying to create a new profile, the process errors when reaching the "Log onto server"
stage and again prompts for credentials.
Running the test-outlookconnectivity cmdlet from
either of the 2010 servers produces the following results.
[PS] C:\Windows\system32>Test-OutlookConnectivity -Protocol:http
ClientAccessServer ServiceEndpoint
Scenario Result Latency
TESTLABEXCH02 autodiscover.external.com Autodiscover:
Web service request. Success 343.20
TESTLABEXCH02 casarray01.testlab.local RpcProxy::VerifyRpcProxy.
Success 0.00
TESTLABEXCH02 casarray01.testlab.local RFRI::GetReferral.
Failure -1.00
TESTLABEXCH02 casarray01.testlab.local NSPI::GetProfileDetails.
Failure -1.00
TESTLABEXCH02 casarray01.testlab.local
Mailbox::Connect. Failure -1.00
TESTLABEXCH02 casarray01.testlab.local
Mailbox::Logon. Skipped -1.00
If remove the 2013 CAS server from the loadbalancer config and
all connections go directly to the 2010 servers again, all of the above tests pass and Outlook connectivity is also restored.
IIS has been reset on all 3 servers incidentally, following any changes made whilst troubleshooting.
I'm struggling to see what I'm missing here, if anyone can assist in troubleshooting this
matter further, or point out any errors in my setup it would be greatly appreciated.
Regards
Matt
Matt -
Applying CU4 for Exchange 2013 SP1 in a mixed 2010 / 2013 Environment
We're planning to apply Exchange 2013 SP1 CU in our mixed 2010 / 2013 environment. We'd also like to apply Exchange 2010 SP3 Rollup 5 as well. Are there any gotchas or best practices on what update to apply first?
Orange County District AttorneyWe are planning to update our 2013 from CU5 to CU8
and 2010 SP3 to Rollup 9
I cant find any official documentation from MS concerning the upgrade path. Example.
Exchange 2013 first, then 2010. Like the above post outline.
I see 2010 being upgraded first thus bring version numbers closer together, reducing incompatibilities.
Do you still feel this is the appropriate install procedure?
Have you done this?
Djoe -
All,
not sure if this topic has already answered, but can't find anything around.
Here's the scenario. Migrating from a single Exchange 2010 to a cluster of 2 + 1 Exchange 2013. Two in a site, One in the other site (DC).
I have migrated successfully a firsat batch of users. Mail flow works perfectly. The only thing is that often the migrated users are experiencing a long time (about 30 minutes) to get their Outlook syncronized. Both OL 2010 and 2013 doesn't make any difference.
They're using OL Anywhere, and I've already tried to rebuild the profile.
From a check on the OL connection status, looks like they're still looking for something on EX2010, but no idea what could be. If I disable the cache mode it works smooth and quick.
My best guess is that is something in cache they're trying to keep updated... but still this doesn't explain the huge delay.
Any help would be highly appreciated!
Thanks!Hi Alessandro,
What happens in OWA? I guess it should be good.
Did you have public folders with Exchange 2010? Were they moved over to Exch 2013? Technically you should move the PF to the latest version from the legacy version before moving over the users?
- Moved the PF to OL2013. same behaviour
May be the outlook clients are looking for th OAB? Did you move the OAB to Exchange 2013?
- Did this too.
Try running outlook on safe mode and see what happens? may be one of the outlook add-in's are looking for something on Exchange 2010?
- Will try that....
Can you do a Test Email Auto Configuration in outlook (Hold CNTRL key and right click on outlook icon on status bar) and see if the exchange url's are pointed to Exch 2013?
- Will try that....
Is this happening to all migrated users or specific? Are they BlackBerry users?
- All users and there are no BB users
Do you have any archived emails on those migrated users? May be outlook is looking for some archived stuff on the Exch 2010 side?
- I instructed Exchange to migrate also the archiving database, however There are no archived mailbox on 2010
Could this be because of any calendar entries? May be migrated user mailboxes are having issues with working with non-migrated mailbox calendars?
- This maybe a possibility. I have only 10 users actively using Exchange, while all others have the mailboxes only because they've Lync. I've completed all migrations today, so there shouldn't be anything left on 2010
Let me know how it went - all the best!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. Regards, Siva -
Coexistence with Exchange 2007 and 2013
Hi everyone ,
i migrated this week to exchange 2013 in coexistence with exchange 2007 ,,,, is it normal that i cannot create anymore a mailbox on the exchange 2007 server even with the console (ecp) in 2013 ??
thanksProvided an answer on your other thread
https://social.technet.microsoft.com/Forums/en-US/393a2406-5202-4d21-9583-2e4beed574be/create-mailbox-on-2007?forum=exchangesvrgeneral
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM
Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DKHello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help! -
GSSAPI with IMAP on Exchange 2013 SP1
We are setting up Exchange 2013 SP1 in our Exchange 2010 test environment to verify our upcoming migration. I have found out that for some reason I can't get the IMAP service in Exchange 2013 to work with Kerberos (GSSAPI) authentication with Thunderbird
as a client. It does work fine in Exchange 2010 SP3 though.
Exchange 2010 SP3 response in Thunderbird:
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
Exchange 2013 SP1 response in Thunderbird:
* CAPABILITY IMAP4 IMAP4rev1 AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
AUTH=GSSAPI is missing and therefore I can't blame Thunderbird from complaining about this. If I compare the output from Get-ImapSettings I can't find anything that would indicate why I shouldn't work. EnableGSSAPIAndNTLMAuth is $true on both server
and LoginType is SecureLogin.
On
http://technet.microsoft.com/en-us/library/jj619283(v=exchg.150).aspx I found out that NTLM is not supported on Exchange 2013 for POP3 and IMAP4 but Kerberos (GSSAPI) and Plain Text Authentication with SSL still is.
Has anyone got IMAP to work with Kerberos authentication on Exchange 2013 SP1?Hello,
According to your description, we are unable to see the AUTH=GSSAPI in Exchange 2013.
My environment is Exchange 2013 CU1. I get the same result as yours. Looks Like Exchange 2013 IMAP does not support GSSAPI as authentication mechanism.
Cara Chen
TechNet Community Support -
Exchange 2010 to Exchange 2013 SP1
I'm on exchange 2010 SP3 with CU4. Can I just download Exchange 2013 Sp1 (i own a license) and prep my domain as if it were the cd and just continue with the migration/installation?
Hi ,
You can proceed with the installation of Exchange 2013 SP1 directly from Exchange 2010 Sp3 Ru4 as Exchange Server 2010 SP3 is the minimum service pack which should be upgraded in Exchange 2010.
You can bring up a new member server and install all the prerequisites from the below website
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
later you can install the Exchange 2013 on new member server where you have prerequisites installed.
Below blog for your reference
http://technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish -
Cross-forest migration to Exchange 2013 SP1 and Outlook 2013 SP1
Hello! I have two forest: Exchange 2010 SP2 RU5 - resource forest and Exchange 2013 SP1 - account forest. I make cross-forest migration from resource forest (linked mailboxes with account forest) to forest with Exchange 2013 SP1.
I have moved mailbox from resource forest exchange 2010 to exchange 2013 sp1 forest.
Outlook 2010 connect to migrated mailbox without any problem, but outlook 2013 sp1 cannot connect to migrated mailbox.
Error look like - cannot find exchange server.
I created new mailbox in Exchange 2013 organization and can connect to it with outlook 2010 and outlook 2013 sp1.
Someone have the same problem with migrated mailbox? How to solve it?
Truly, Valery TyurinYou can use New-MoveRequest to perform a cross-forest move. Here is a well post and step-wise explanation you can check for cross forest migration from exchange 2010 to exchange 2013(http://msexchangeguru.com/2013/11/03/e2013crossforestmigration/).
Moreover, you can try this utility (
http://www.exchangemigrationtool.com/ ) to accomplish this task. -
Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration
Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1722
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 323
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1237
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 313
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 311
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 318
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 53361 StoreEc: 0x977
Lid: 51859
Lid: 33649 StoreEc: 0x977
Lid: 43315
Lid: 58225 StoreEc: 0x977
Lid: 39912 StoreEc: 0x977
Lid: 54129 StoreEc: 0x977
Lid: 50519
Lid: 59735 StoreEc: 0x977
Lid: 59199
Lid: 27356 StoreEc: 0x977
Lid: 65279
Lid: 52465 StoreEc: 0x977
Lid: 60065
Lid: 33777 StoreEc: 0x977
Lid: 59805
Lid: 52487 StoreEc: 0x977
Lid: 19778
Lid: 27970 StoreEc: 0x977
Lid: 17730
Lid: 25922 StoreEc: 0x977
+ CategoryInfo : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
SME 7.1 not working with Exchange 2013 SP1 CU6
Hello, i tried upgrading to SME 7.1 on our Exchange 2013 SP1 CU6, but when trying to configure the Exchange Server in the SME management console using the configuration wizard, it gave an error before the LUN mapping page, saying "Failed to get Exchange information for server" and "The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.". I upgraded Snapdrive to 7.1, verfied all credentials according to the manuals, re-installed and rebooted multiple times (registry and filesystem cleaned, even tried to rename the existing SnapInfo directory, ...), stopped all other services on the server but without any change... Every time when trying to run the configuration wizard, the debug log shows no errors, lists all Exchange information and ends with the following lines:[11/18 12:51:58 155] Exit CSmeCDOExm::GetExchangeStructureInternal 0x0
[11/18 12:51:58 155] Exit CNtapSnapMgr::GetExchangeStructure: 0x0
[11/18 12:51:58 233] Enter CSmeServerBase::~CSmeServerBase ...
[11/18 12:51:58 248] m_ptrSnapShot released
[11/18 12:51:58 248] m_pISnapShot4 released
[11/18 12:51:58 248] m_pISnapShot5 released
[11/18 12:51:58 248] m_pISnapShot6 released
[11/18 12:51:58 248] m_pISnapShot7 released
[11/18 12:51:58 248] m_pISnapShot8 released
[11/18 12:51:58 248] m_pISnapShot9 released I ended up uninstalling SME 7.1 and re-installed SME 7.0 which is working. Exchange Server: ESXi 5.5 VM, Windows Server 2012 R2 (with current patches), Exchange 2013 SP1 CU6 - no DAG, single server installation (in co-existence with Exchange 2010), 4 iSCSI LUNs created with Snapdrive (1x Log, 3x Store), System drive and Exchange installation drive on vmdk Disks (via ESXi -> NFS store on the same NetApp)NetApp: FAS 2240-2 with Data ONTAP 8.1.4P1 7-mode (with complete license bundle) Anyone else got this problem or even better - a solution?We could not reproduce the error with the upgrade workflow.Looking at the error and the relevant function, we could force the problem in following conditions: -SME is configured or ran at the DAG level-one of the following services is stopped or not responding on one nodes of the DAG Snapdrive Service, Snapmanager Service, Snapdrive Storage Management Service,Snapdrive Management Service. Would be good if we could get the output of following powershell cmdlet before and after the upgrade: Get-Service –ComputerName Node1, Node2, Node3 –name Snap*, SDMGMT*, SWSvc Best regards,Dan
-
First Exchange 2013 server in an Exchange 2010 SP3 organization
I've read the documentation that states to install Exchange 2013 with CU2 as the first Exchange 2013 server in an organization running Exchange 2010 SP3. Maybe I over-read this to mean "Exchange 2013 with at least CU2" (meaning to start with Exchange2013-x64-cu3.exe),
but when I installed the CU3 version I ended up with Standard rather than Enterprise. I need to run 2013 with Enterprise. I've looked around for an Enterprise version of Exchange2013-x64-cu3.exe but cannot find one.
How do I install Exchange 2013 Enterprise into my Exchange 2010 SP3 organization? Thank you.Please review
http://technet.microsoft.com/en-us/library/bb232170(v=exchg.150).aspx
These (Exchange 2013 Standard Edition and Enterprise Edition)
licensing editions are defined by a product key. When you enter a valid license product key, the supported edition for the server is established. Product keys can be used for the same edition key swaps and upgrades only; they can't be used
for downgrades. You can use a valid product key to move from the evaluation version (Trial Edition) of Exchange 2013 to either Standard Edition or Enterprise Edition.
You can also use a valid product key to move from Standard Edition to Enterprise Edition. -
Here is the scenario:
Legacy Host: Windows 2008 R2
Guest VM: Windows 2008 R2 with Exchange 2013 SP1 DAG cluster.
After importing the VM (2008 R2 and Exchange 2013 DAG) into a 2012 R2 host (Cluster). (copy VM files to new 2012 R2host) Everything works fine.
Then upgrading "Installation Services" (for Windows 2012 R2 host) on the imported VM runs fine with no errors to the "Restart" prompt. VM than shows: "Configuring Windows updates 32% complete. Do not turn
of your computer." Hangs there for about 20 minutes until is says "shutting down". Hangs there for 20 minutes until power off. Restart to normal start; "Preparing to configure Windows. Do not turnoff your computer." proceeds slowly
to "Configuring Windows updates 32% complete. Do not turn of your computer." hangs there again indefinite. Sometime hangs at shutdown cycle and "Configuring Windows updates 32% complete. Do not turn of your computer." indefinitely.
I moved 20 other machines from a 2008 R2 host to new Windows 2012 R2 hosts all of these machines install the 2012 R2 Integration services just fine on the 2008 R2 VM. Just the 2008 R2 VMs clustered (DAG) and Exchange 2013 SP1 do not take the Integration
Services upgrade.
Any advise from Microsoft? I know I could decommission the DAG and Exchange machines and install Integration services on the native box before Exchange and DAG and that would sure work, but I'd rather avoid that amount of work for a simple integration layer
upgrade.
Thanks
Gerhard Waterkamp ACSLA Inc.Hi,
Could you try use the following method to fix this issue first?
1. Run the System Update Readiness Tool, then check if there is any error in the Checksur.log and checksur.persist.log.
1. Please run the System Update Readiness Tool on this affected server. Please download this tool from the following Microsoft article:
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7
http://support.microsoft.com/kb/947821/en-us
2. The System Update Readiness Tool creates the log files that captures any issues that the tool found or fixed. The log files are located at the following location:
%SYSTEMROOT%\Logs\CBS\
3. Please paste the checksur.log here for analysis.
If there is no error found, please try the following step.
==================================
2. Use Fix it tool to reset the Windows Update components.
1. Open the following link.
http://support.microsoft.com/kb/971058/en-nz
2. Select Windows 8.1, Windows 8 and Windows 7 in the product selection box.
3. Click “Run Now” to reset the Windows Update components.
Note: We can reset the Windows Updates manually by following the steps in the KB above.
3. Use the System File Checker tool to repair missing or corrupted system files
1. Open the command promote with Administrators.
2. At the command prompt, type the following command, and then press ENTER:
sfc /scannow
Any errors are found in the steps above, please let me know.
Hope this helpful.
Best Regards,
Jason Zeng
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Cannot write email body in OWA with Exchange 2013 SP1 CU6
Hi,
I have a problem with Exchange 2013 SP1 with CU6.
All of OWA user cannot write in the body of email. They can write the Object and the recipient but they cannot select body and write the body message. We have try with multiple Web brother and desactivate all Add-on but the problem still there...
The only way that works is to respond to an email, and in that case, it's working, we can write normally in the body of email.
Have you an idea ?
Thanks in advance!
SebastienHi,
After contacting Microsoft support, we have found the solution.
The problem appear after we have recently install the patch described in this KB 2997209:
https://support.microsoft.com/kb/2997209?wa=wsignin1.0
But on 2013 Mailbox Server, Echange is not installed in the default path C:\ but on D:\
So we have to manually copy the content of folder D:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\Owa\prem\15.0.995.29 in the folder 15.0.995.31 (MAKE a BACKUP of FOLDER BEFORE!)
No need to reboot, or restart IIS, it's working after that!
@+
Sébastien
Maybe you are looking for
-
when i execute dbcheck in db13, i receive this message: ORA-00600: internal error code, arguments: [25012], [19], [21], [], [], [], [], [] i have Oracle 9.2.0 and i don't find any note in the OSS notes.
-
PR not adopted in Scheduling Agreement
I have created a Scheduling Agreement but when i add the Item from Create with Ref. to Purchase Requisition of that Material its not picking up the PR. actually that PR no. is made in PR type ZIMP (our customized PR type) but when I made the PR in PR
-
HT1386 Sync problem from Macbook Pro to iPad 4
I managed to download the music I purchased from iTunes to my Macbook Pro. I also managed to sync the music with my iPhone 5 so that I have all purchased music on the iPhone. However, I fail to sync the same music from the Macbook to my iPad 4. Any c
-
IPad PDF with LiVeCycle Designer
Will I ever be able to open a PDF on my iPad that was created with LiveCycle Designer?
-
Presenter 10 Failing During Publish(New Issue)
All of our daily users(6) are experiencing the same issue that started last week. They start the publish process and it hangs at a point where it says something about audio conversion and then it closes down and there is no file. Has anyone found a f