Exchange and Marketplace down?

Hi, both places seem to be down, shouldn't there be a mention in the respective forums?
Some posts in Marketplace seem to indicate that it this situation is not new...

I am receiving Slow or no loading in Acrobat forums as well. You have to wait till times out as much as a Minute or more, two or three times then suddenly like lightning the same link will load fast.
Typical trouble with the servers. or the Internetconnection from the Servers. It will never be cured.

Similar Messages

Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
When I try to configure Outlook profile for the user, I manually enter exchange server name and user name.
Check User button underlines server name and user name and profile gets created successfully.
Once I try to open outlook for the user I get
Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance
If I search the content of the log files under
X:\Program Files\Microsoft\Exchange Server\V15\Logging\RPC Client Access
I can’t find any records indicating a connection attempt from the client’s IP or references to the version of the outlook used, however I can see a 3 way handshake followed by a 4 RCP packets and then 4 nspi bind requests and responses when outlook opens
up and then connection is torn down.

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
Hi,
That version of Outlook 2010 (14.0.4760.1000) is not supported with Exchange 2013 and will not be able to connect. It need to be on at least SP1 +
Outlook 2010 November 2012 update (14.0.6126.5000)
See: Exchange 2013 System Requirements -
Client Support
Martina Miskovic

Adobe Exchange Plugin Slowing Down Photoshop CC?

Recently, Photoshop CC has been running really slow, and slowing down my computer as a whole. I've been trying to trouble shoot what was causing this, because it wasn't doing this previously. I believe I've narrowed it down to two things - Too many styles loaded in my Styles panel at once (my custom Styles file was over 200mb, because I added a lot of styles that had high res images embedded in them), and for some reason, the Adobe Exchange plugin also seems to be causing a problem.
When I change my styles back to the default styles it helps speed thigns up, but Photoshop still doesn't start performing normally again until I remove the Adobe Exchange plugin. Anyone else having issues with this plugin eating up a lot of memory and slowing things down?

Hi Otmaxo,
Thanks for getting in touch. So that we can work out whether this is a problem with Extension Manager or Adobe Exchange, can you try closing Photoshop CC, then downloading the Adobe Exchange Panel (ZXP) from www.adobeexchange.com, then installing the ZXP file directly in Extension Manager without Photoshop CC open?
If this does not work, can you confirm whether other ZXP files can be successfully installed via Extension Manager?
Thanks,
Fraser

Messages are in to be delivered state and slows down the message processing

Hello,
Messages are in to be delivered state and slows down the message processing.
this happenens in case of DB2 on some machine where the issue about high load on DB2 is caused by standard programming in SAP XI that executes a statement, where it uses the condition 'where 1<0' prio to the original SQL statement configured in the channel configuration,
Can you please help me out in solving this issue?
Thanks,
Soorya

Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords

Sync iPad Calendar to Both Exchange and Outlook on Two Windows 7 PCs

I would like to sync my Outlook 2010/Exchange calendar from my computer at work with my iPad, and then sync my iPad with Outlook 2007 on my home computer. I'd like for the result to be one sync'd up calendar on each device.
I have my iPad set to sync Over The Air with my Exchange calendar from work. It syncs perfectly. I would like to also sync that Exchange calendar, now on my iPad, with my home computer. My home computer is the one that I sync my iPad with via iTunes. That computer runs Windows 7 & Outlook 2007. My home computer does not run exchange and Outlook 2007 at home is simply running as a local .PST file.
My problem has been that the Exchange calendar on the iPad does not sync with Outlook 2007 on my home computer. I have iTunes on my home computer configured to sync my calendar with Outlook 2007 on my home computer, but iTunes has created a second calendar on my iPad called "Calendar" under the "From My PC" heading in the Calendar app. My Exchange calendar shows up on my iPad as "Calendar" under my work email address "[email protected]". The two calendars do not appear to play nicely with each other. The From My PC Calendar only syncs items from my calendar in Outlook 2007 on my Home PC. The "[email protected]" (Exchange) Calendar only syncs with my work PC.
I'm looking for a solution that doesn't involve installing anything on my work PC, as technically that machine is locked down and I cannot add any programs.

I had my home computer set up to sync to work's Exchange server. It worked well, but I didn't like seeing work email messages and other programs trying to sync with my default Outlook folder, which was then the Exchange (& work related) .ost file. I know there are various ways to manage those problems using filters, view, subfolders, etc., but it was a hassle for me. I think it could work well for many other folks.
For now, I have published my work calendar and subscribed to that calendar on my home computer. So I have view only access to my calendar on my home computer (and I can add/edit calendar items on my iPad (or Outlook Web Access) when away from work). This is not quite what I wanted, but it may work.
It almost makes me long for the days when I used my Windows Mobile Treo to sync back and forth between exchange at work and outlook at home (but had many sync conflicts as a result).

We live 235 meters from exchange and have been tol...

we live 235 meters from exchange and have been told 2meg is the most we can have ..hummm..
sorry to the chap that just called us , but i dont believe your words .
the intermittent connection problem seams to have been solved after a long visit from the open reach engineer last Friday . Thank you to that chap ! .
i understand that it can take several days to allow our broadband connection to settle , as stated by the best engineer to date of last friday .
he explained what he had found and corrected the problem wonderfull
when you pay top price for unlimited service you expect to get the service you want , not to be told you will be caped at just over 2meg .
upon checking the approx speed available via the BT line speed checker i think the chap that just told me what we can have needs to check the facts first before calling .
our line can take over 10+ meg as we have had in the past before we had this stability problem now that problem has been solved why do we have to put up with only 2meg ?? .
i bet if we only payed an eigth of our monthly bill you i.e BT would be very quick to approach the matter .
so please someone explain why .
thanks ..
sunnydorset .
Solved!
Go to Solution.

hi there , thanks for your reply . here are the current adsl stats .
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
26.4 dB / 5.8 dB
Line attenuation (Down/Up)
14.5 dB / 6.6 dB
Output power (Down/Up)
0.0 dBm / 12.3 dBm
Loss of Framing (Local)
21
Loss of Signal (Local)
2
Loss of Power (Local)
0
FEC Errors (Down/Up)
56 / 4294967264
CRC Errors (Down/Up)
0 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
2
Line state
Connected
Connection time
2 days, 20:18:21
Downstream
2,268 Kbps
Upstream
1,212 Kbps

UPS and shutting down servers

Not sure if this thread should be better posted at the OS X Server forum, but let's try it
Today I found the time to connect the UPS to our XServe via USB. It worked great, the UPS appears at ServerMonitor and also at the system preference panels energy settings.
However the UPS has only one USB port, but we have currently two XServes. My intention is to keep the servers running as long as possible till the UPS reaches 25 % left of its energy. Then safely shutting down the servers.
While it is easy to configure this on the server the UPS is connected, I find no setting for doing so at the other system. Basically the "master" XServe (that connects to the UPS) should shut down its "slaves" (the other XServe specifically).
I already dealt with a quite old system some time before (Cobalt RaQ) where it was able to set this up (via the MAC addresses if I'm not wrong).
I would look forward if someone can give me a glue how to realize this on the XServe ?

>Okay, writing a script... I guess you don't have anything already written
Nope, sorry.
>The main problem would be that both servers can communicate with each other only by using their WAN IPs. So we would need to get some security (like authentication with a username and password) additionally.
If your servers have two NICs, there's nothing preventing you from creating a private network between the two using a simple ethernet cable between them. That way they can communicate privately.
> When I connect the UPS with an USB hub and on that hub both XServes, could this work ?
No. USB doesn't support this kind of topology. There can only be one bus master. The other machine won't work.
>The UPS also has a serial interface, just the XServe lacks of this "old technology"
On the contrary. The XServe has a 9-pin serial interface on the back. It's normally configured as a console port for out-of-band management but you can configure it as a standard serial port by disabling SerialTerminalSupport (in /System/Library/StartupItems). However, the issue is then how to read the serial port. I'm guessing the software that ships with the UPS is designed to use the USB port and you may be on your own there.
>By the way, I should mention that the UPS is a Belkin "Universal UPS".
I don't think it makes a big difference. You'll have the same issues with any UPS vendor.
The only other option I can think of is a network-aware UPS. Some UPSes (such as those from APC) have a network option where you can query the UPS over the network. It would then be relatively simple to query the UPS via SNMP to gauge its runtime and shut down safely. I don't know if the Belkin has this option.

When I boot up my iMac and hold down ALT it boots straight into windows 7 without giving me the option to boot OSX back up. Have I lost OSX and all my files completely? Please help

I set up boot camp for my iMac with windows 7. All was fine and it gave me the option to boot into windows.. I then used windows for a few hours and shut down the mac to boot back onto OSX when I was done.. This time my mac booted straight to windows 7 even with me holding down the ALT key it gave me no choice.
I'm assuming the boot camp set up was wrong somewhere but is there a way to get back on to OSX now?? Please help

1. Have you tried both Alt keys - maybe your Alt key is dead.
2. Do you have wireless keyboard? Have you tried to change batteries? USB Keyboard?
3. If your Win is installed correctly then you have also installed all windows support software.
There should be Startup manager like on the Mac (next to the clock little bootcamp app or in control pannel) to restart your Mac into the Mac partition.

HT202159 I have been on to apps store logged in and gone on my purchurse to try and re down load Mountin Lion however it just states an error as accord I can't get it to re down load to launch pad in lion

I have been on to apps store logged in and gone on my purchurse to try and re down load Mountin Lion however it just states an error as accord I can't get it to re down load to launch pad in lion

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Page up and page down in ALV

Hi all ,
Page up and page down are not working automatically in my ALV Grid report. I have all set in my pf-status. Do i need to explicitly write any code for that or do i need to any setting for that plz let me know .
regards
rao

Hi,
i hope the problem is with the Pf-status,so try to do the following and see...
Go to SE41 give the Program name SAPLKKBL
and status as STANDARD
now click Copy status (CTRL+F6), now give your Program name , and PF-status and copy it. now save it and activate the pf-satus which you have copied. and use it in your PF-status form.pass that status using the parameter call back status option.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = g_repid
i_callback_pf_status_set = 'STATUS'
i_callback_user_command = 'USER_COMMAND'
2.
FORM STATUS USING P_EXTAB TYPE SLIS_T_EXTAB.
*- Pf status
SET PF-STATUS 'STATUS' excluding p_extab.
"this is i copied it from standard program
ENDFORM. " STATUS
now check it.
Regards
vijay

If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load

If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load the tabs or if it does and I then try to add the game or any other site at all on a tab it causes firefox to stop working (though not close) and I have to restart opening and closing it many times to get it to work at all.

1st, you will not be able to activate your PPro1.5 on ANY new computer, see next link for the special version you MUST use
CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
2nd, you already mentioned Virtual XP, so if a direct install doesn't work, that would be the way to go... or, to just do what SHOULD work from the start, just do Virtual XP

I keep getting message "mozila Firefox not responding." It takes minutes to down load a site - some times it just gets in a loop and never down loads. Then when I try to click on it again screen goes opaque and i get the same message.

I 'm getting message "Mozila Firefox not responding." It takes minutes to down load a site - some times just gets in a loop and never down loads. The little circle at top just keeps going round in circles .
Then when I try to click on the screen again the screen goes opaque and I get the same message re " Mozilla Firefox not responding" - and it is minutes before I can get back in to close down screen.
I have downloaded Fire fox version 4 and this is still happening.

See:
* http://kb.mozillazine.org/Error_loading_websites

How can I save to web without getting error messages and having my computer tell me there is no memory or freezing up and shutting down? I've read many other suggestions but have tried those things and none have worked. I have photoshop 12.

Photoshop: Selecting Save for Web gives error: "Could not complete this operation. An unknown operating system error has occurred."
I have tried all of the solutions I've found, but none work for me or my two systems (windows 7 and windows 8.1)
Many times I get the message only when saving a web file that there is not enough memory: My windows 8 has 2 TB and 10 Gigs of ram. I took it into the shop to see if something was wrong with the hard drive or ram, but when I hooked up my windows 7, I'm having the exact same issues. Please help.
I tried this:
I set ram to 100%, I changed my preferences in editor to not run anything to do with auto analyzer, I renamed the file auto analyzer to put a space in as someone said to do... I even did the following...
Reset Photoshop's Save For Web preferences:
1. Quit Photoshop
2. Delete the "Adobe Save For Web 12.0 Prefs" file:
Mac: Users/[Username]/Library/Preferences/Adobe Save For Web 12.0 Prefs
Windows XP: Documents and Settings/[Username]/Application Data/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Windows 7 and Vista: Users/[Username]/AppData/Roaming/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Whenever I "save for web" and save something to the root of C:/ it will work, but the next time I "save for web" it produces the error. I was able to fix it by going into User Account Control settings and scaling down to "never notify." It requires a reboot, but the next time I "saved for web" it worked fine.
If you do this, be sure to change the UAC back to "default" as it is a security measure.
FYI you will have to restart anytime you tweak UAC.
To change UAC in Win 7 go to control panel>Action Center>Change User Account Control Settings and drag the slider to "never notify."

Try this: press F10 or tap the Alt key to display the menu bar temporarily, then
View > Toolbars > Menu Bar
If that doesn't work, you could reset your toolbars to factory default using Firefox's Safe Mode. First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, start Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode], and check only the box to reset toolbars. Be careful not to "reset" anything else if you didn't back up.
Hope this helps.

My browser takes minutes to open then when the tab is fully loaded it will start saying "Connecting" and slow down or freeze.

When I open my browser, it takes 3-5 minutes to fully open. When I get to a website, randomly the tab will say 'Connecting' and slow down and take 10-15 minutes to function or freeze completely. This almost always happens on sites that require Flash Player use. I have uninstalled and reinstalled my Flash several times. I've added memory, as someone suggested it was a memory issue. It's so frustrating, please help!

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
In other words, your computer can't talk to your operating system so you can't access your data.
Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
First: Shut down your computer completely
Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
Hope this helps, it's annoying but it's your safest bet.
All the best.

Exchange and Marketplace down?

Similar Messages

Maybe you are looking for