Exchange Server 2003 authenciation error.Pls help

Hi all,
I use the following codes to connet Exchange Server 2003, but errors occurs.Can anybody help me?
String host = (String)map.get("host");
Integer port = (Integer)map.get("port");
String username = (String)map.get("username");
String password = (String)map.get("password");
Properties props = new Properties();
Session session = Session.getDefaultInstance(props, null);
if (LOG.isDebugEnabled()) {
session.setDebug(true);
Store store = session.getStore(this.getProvider());
store.connect(host, port, username, password);
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.fetchsize: 16384
DEBUG: mail.imap.statuscachetimeout: 1000
DEBUG: mail.imap.appendbuffersize: -1
DEBUG: mail.imap.minidletime: 10
DEBUG: trying to connect to host "xxx", port 143, isSSL false
* OK Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 (xxx.xxx.local) ready.
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
DEBUG: protocolConnect login, host=xxx, user=tester1, password=<non-null>
DEBUG NTLM: type 1 message: suppliedDomain: ; suppliedWorkstation: Concord.xxx.local
DEBUG NTLM: type 1 message length: 54
A1 AUTHENTICATE NTLM
+
TlRMTVNTUAABAAAAACAAAAAAAAAAAAAAFgAWACAAAABDT05DT1JELkdFQVJURUtTLkxPQ0FM
A1 NO Logon failure: unknown user name or bad password.
16:07:01,951 pool-11-thread-1 ERROR MailMessageActionService: - Logon failure: unknown user name or bad password.

JavaMail 1.4.3 added support for NTLM authentication. Normally I would expect that the
same username and password would work with any authentication mechanism that's
supported by the server, but that doesn't seem to be the case here.
You can disable ntlm authentication by setting the session property "mail.imap.auth.ntlm.disable" to "true".

Similar Messages

  • Anybody using MBA OSX able to use "Notes" to Sync with the notes located on a exchange server 2003 pls?

    My company is using an Exchange Server 2003 and Im using both an Iphone 5s and a MBA OSX.
    All Exchange features are seamless on Iphone (mail, contacts, alendar AND NOTES)
    On my laptop MBA:
    - I used to use Outlook for mAc in which the notes were working but I had to go away from this (issue rebuilding too often and incompatibility with Wrikes etc.)
    - so I now use Mail, Ical, Contacts and ... I wish Notes! - but I cant get Notes to pick up the exchange server notes ... no error message just nothing happens (yes the account exchange is set up for all features and Notes is checked) ... Im puzzled - Am I alone experiencing this please?
    Thanks community!
    Seb

    correction: It's SBS 2011 running a strip down version of exchange 2010 ... and my MacBook Air Notes Application wont sync the notes with exchange ... ;-(((

  • Help to have exchange server 2003

    help me i want to have exchange server 2003 for my projet

    Hummm... difficult to get Exchange 2003 source or perhaps if you have MSDN subscription....
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

  • Portal integration with Exchange server 2003 issues.

    Hello,
    We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain.
    I have followed all the steps in the notes and documents available there in SDN. There are few issues:
    1) The latest KerbMap filter has been configured in Exchange backend server. SAP note 785343 says that the exchange frontend server needs to be configured for anonymous authentication to enable pass-through authentication. But doing this breaks the form based authentication in exchange server, and it also poses security risk when the backend exchange server is behind the firewall. How do we enable pass-through authentication so that the exchange frontend passes the mysapsso2 cookie to the exchange backend server?
    2) When I try to create an appointment or try to view the appointments, it gives an error message saying " No logon data found for system Exchange". The Exchange system has been configured for SAP Logon Ticket, and the user mapping fields were left empty. Why should it prompt for user mapping when the logon method is "SAP Logon Ticket"?
    There are many documents out there, but none is the latest with clear steps. Can anyone point me in the right direction please?
    Thanks,
    ~Yasin

    As far as I remember, when Exchange 2003 is installed on a Domain Controller, it uses the local DC as a GC. You need to set back the 2003 DC as GC and restart it.
    I believe, you are aware that demoting/promoting a DC with Exchange server on it is not supported by MS. The best approach is to:
    Introduce an Exchange 2010 member server
    Move all resources from Exchange 2003 to Exchange 2010
    Decommission Exchange 2003
    Demote the 2003 DC
    Step by Step Screencasts and Video Tutorials

  • Oracle (ODBC Error) Pls help

    Hi Friends
    I created a new project with Vb.Net and database of oracle 10g
    I build the Exe file when i opened for the first time its working fine and second time too
    but some times its not even logged in getting an below error message
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 8.1.5.0.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 8.1.5.0.0 - Production
    Time: 25-JAN-08 03:18:37
    Tracing not turned on.
    Tns error struct:
    nr err code: 0
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 0
    nt OS err code: 0
    and as well as geting "SqlConnect Attr Failed" error
    Pls help me out on this
    thanks
    Krrish

    Check your Folder configuration under 'My Content Server' , change the content style to native and clear the 'Show hidden when browsing' option.
    Hope this helps.
    Regards,
    -Mukesh.

  • Exchange Server 2003 Email setup on IPHONE and IPOD Touch

    Hi we have Exchange Server 2003 (SP2) on Windows Standard Server 2003 and we can access OWA from any browser and also am able to setup Exchange server Emails on Blackberry device without any problem but when I try to setup on IPHONE or IPOD touch I get error message saying Can not connet to server. I tried to get the answer on google and seems like it should work but seems like I need to some other settings on exchange server to setup exchange server email on Iphone or Ipod. Any idea what could be the issue.

    Sorry I forgot to tell you that I tried without Exchange also.
    I tested my activsync Connectivity test from https://testexchangeconnectivity.com/ and it fails at SSL. (Port 80 and 443 shows open and passed) In our server we bought SSL scertificate last year from godaddy and installed as I thought it requires but later on I removed as I was not able to setup iphone. So I don't know what could be the exact problem.

  • Move mailbox from exchange 2010 2003 , Transient error MapiExceptionLogonFailed has occurred.

    We are currently migrating from Exchange 2003 to Exchange 2010, same domain.
    We have successfully moved some mailboxes from exchange 2003 to exchange 2010 without any problems.
    Now we need to move 1 mailbox back from exchange 2010 to exchange 2003.
    After creating the moverequest it stucks on 0% and the log shows the error below.
    After using Bing I found this post -> http://social.technet.microsoft.com/Forums/exchange/en-US/ef41ae05-8816-4c0c-968a-c48f0e3d50b5/move-mailbox-back-from-exchange-2010-to-exchange-2003-failure?forum=exchangesvrdeploylegacy
    This suggest -> 
    After I give FULL permissions to each Mailbox Stores on Exchange 2003 server, I was able to move my mailbox back onto the Exchange 2003 server. In details:
    Simply right click Storage Group\Mailbox Store and go to Security, in there you may see Exchange Servers group already there, if no add it in, then give it FULL permissions! and thats it!
    Create a new move request but still stuck on 0% and error as below
    20-3-2014 16:32:10 [ex2010p11] 'contoso.com/Users/exadmin' created move request.
    20-3-2014 16:32:11 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'exchangep21.contoso.com' (14.3.151.0 caps:07) is examining the request.
    20-3-2014 16:32:11 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
    20-3-2014 16:32:11 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
    20-3-2014 16:32:11 [ex2010p21] Request processing started.
    20-3-2014 16:32:11 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (1/60).
    Error details: MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
    Diagnostic context:
        Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
        Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
        Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
        Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: ex2003
        Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
        Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
        Lid: 45169   StoreEc: 0x824     
        Lid: 44273  
        Lid: 59431   EMSMDB.EcDoConnectEx called [length=163]
        Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
        Lid: 56945  
        Lid: 59431   EMSMDB.EcDoConnectEx called [length=163]
        Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
        Lid: 59505   StoreEc: 0x3F2     
        Lid: 52465   StoreEc: 0x3F2     
        Lid: 60065  
        Lid: 33777   StoreEc: 0x3F2     
        Lid: 59805  
        Lid: 52209   StoreEc: 0x3F2     
        Lid: 56583  
        Lid: 52487   StoreEc: 0x3F2     
        Lid: 19778  
        Lid: 27970   StoreEc: 0x3F2     
        Lid: 17730  
        Lid: 25922   StoreEc: 0x3F2     
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
    Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
       at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
    storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
       at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, String mailboxDn, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo,
    WindowsIdentity windowsIdentity, String applicationId)
       at Microsoft.Exchange.MailboxReplicationService.MapiUtils.OpenSystemMailbox(Guid mdbGuid, String serverDN, String dcName, NetworkCredential cred, String& systemMailboxDn)
       at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.OpenSystemMailbox()
       at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
       at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
       at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.ClearSyncState()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<>c__DisplayClass23.<CleanupOrphanedDestinationMailbox>b__22(MailboxMover mbxCtx)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.CleanupOrphanedDestinationMailbox(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: IMailbox.SaveSyncState
    OperationSide: Target
    Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)
    Key: F2FA63B0116C564EA4C598D69786443D9E4FB582FF27D2449142F949D567E1E7E0CA914F6695624C98892FA527AAA91E
    SyncStateLength: 0
    20-3-2014 16:32:41 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'ex2010p21.contoso.com' (14.3.151.0 caps:07) is examining the request.
    20-3-2014 16:32:41 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
    20-3-2014 16:32:41 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
    20-3-2014 16:32:41 [ex2010p21] Request processing started.
    20-3-2014 16:32:41 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (2/60).

    Hello,
    When you move mailbox from exchange 2010 to exchange 2003, please check if the following situations exist:
    http://technet.microsoft.com/en-us/library/dd638157(v=exchg.141).aspx
    Before you move mailbox again, please clear the previous move request.
    I recommend you use EXBPA to check your exchange server 2003 and exchange 2010.
    Please check if inheritable permission is missing on the mailbox store on Exchange Server 2003.
    Cara Chen
    TechNet Community Support

  • DPM 2010 - Exchange Server 2003 Re-Directed Restore

    Hello people. I am looking for some help. We currently have DPM 2010 on Windows 2008 R2 backing up Exchange Server 2003 SP2 on Windows 2003. We are trying to migrate our existing Exchange server DBs (physical server) to another Exchange Server 2003(VMware
    VM) in the same domain and site. We are trying not to go the P2V route if at all possible. The existing Exchange DBs are about 1.3TB in size. The existing server has 4 Storage Groups, with a total of about 20 mailbox stores. We are trying to
    get the data migrated within a 48 hour window, which at this point eliminates moving the mailboxes to the new server using Exchange task - Move Mailbox. I am also thinking RSG would not be a good option for us as the existing mailbox server will remain operational
    until all the data has been migrated to the new server.
    Is anyone out there aware of a document that walks through the process of doing a re-directed restore of Exchange Server 2003 DBs, backed up using DPM 2010? If a redirected restore can be done, how does AD get updated to reflect the new HomeServer for users'
    mailboxes? Can the DBs simply be restored as raw files to the new server and be successfully mounted?
    Thank you in advance for your support.
    TD
    TD

    Hello people. I am looking for some help. We currently have DPM 2010 on Windows 2008 R2 backing up Exchange Server 2003 SP2 on Windows 2003. We are trying to migrate our existing Exchange server DBs (physical server) to another Exchange Server 2003(VMware
    VM) in the same domain and site. We are trying not to go the P2V route if at all possible. The existing Exchange DBs are about 1.3TB in size. The existing server has 4 Storage Groups, with a total of about 20 mailbox stores. We are trying to
    get the data migrated within a 48 hour window, which at this point eliminates moving the mailboxes to the new server using Exchange task - Move Mailbox. I am also thinking RSG would not be a good option for us as the existing mailbox server will remain operational
    until all the data has been migrated to the new server.
    Is anyone out there aware of a document that walks through the process of doing a re-directed restore of Exchange Server 2003 DBs, backed up using DPM 2010? If a redirected restore can be done, how does AD get updated to reflect the new HomeServer for users'
    mailboxes? Can the DBs simply be restored as raw files to the new server and be successfully mounted?
    Thank you in advance for your support.
    TD
    TD

  • Upgrading Exchange Server 2003 to 2010 to 2013 is worth???

    Hello there, I am planning to upgrade about 30 users from exchange server 2003 to 2010 and finally to 2013. Is it worth to upgrade in this way because this steps are hard and very time consuming. What if, if I just copy all the user mailboxes directly to
    exchange server 2013 and configure 2013 as a new exchange server and decommission old exchange server 2003?
    How to copy user mailboxes to fresh exchange server 2013?
    Please help me out.
    Thankx

    Yes, Export the PST from User Mailbox and Import it into Exchange 2013 Mailbox. But the problem is, you can't install Exchange 2013 in your current Exchange 2003 environment.
    Only option is to install Exchange 2010 first and migrate all the users to Exchange 2010. Also Replicate the Public Folders too(If you are using)
    Decommission Exchange 2003 entirely. Install Exchange 2013 SP1 and Migrate the User to Exchange 2013.
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • "Exchange Server 2003" Public folder access within OWA

    Hello,
    I can connect to my exchange server 2003 (I know I have to upgrade) with OWA through an alias (webmail). After connecting in OWA, when I click a button in the navigation bar (contact, rules, ...), it's working OK except for public folders. When I click on
    public folders button, IE open a new window with this URL https://<netbios server name>/public instead of https://webmail/public. I googled around and found a thread explaining how this problem can be address by modifying navbar.js. But in my situation
    navbar.js and every other files located in ..\exchweb\control doesn't seem to be access anymore, they have been replaced by those here ..\exchweb\6.5.7651.60. There is no navbar.js in this folder but a vw_navbar.js. I can't find the code I have to modify like
    in navbar.js to to address the problem.
    Thanks for your help.
    Chris

    Hi Chris,
    This symptom can be caused if we enabled any redirection on /Public virtual directory. You can check the /Public settings and configuration files to remove the redirection. We can also reset the reset the default virtual directories as the KB introduced:
    http://support.microsoft.com/kb/883380
    Best Regards,
    Tracy

  • Exchange Server 2003 Disaster Recovery

    Hi!
    My exchange server 2003 reside on the same server where my DC was installed. Later on, my AD database had been corrupted and no system state backups. The problem is i cannot log on the said server in normal mode but I can log on to it in DSRM mode. Is it
    possible to remove/uninstalled the exchange under DSRM mode?
    Please help.
    Thanks
    Greenlock

    Exchange EDB Recovery is powerful tool to repair and restore inaccessible mailboxes of Exchange Server and repairs the database files of Exchange Server. It recovers EDB server mailboxes and imports them directly to Outlook and these files are used as PST
    files.
    Download:- http://www.pcrecoveryutility.com/exchange-server-recovery.html

  • Exchange server 2003 public folders

    Hi Microsoft,
    I am trying to decommission an Exchange 2003 server. It has public folders on it. How do I tell if they are the master replica?
    Kind Regards,
    Jerome Green

    as long as you don't remove anything you will be save.
    check these articles
    http://www.petenetlive.com/KB/Article/0000426.htm
    http://www.msexchange.org/articles-tutorials/exchange-server-2003/migration-deployment/PFMIGRATE.html
    http://blogs.technet.com/b/agobbi/archive/2010/08/04/how-to-move-public-folder-from-exchange-2003-to-exchagne-2010.aspx
    http://careexchange.in/moving-public-folders-from-exchange-2003-to-exchange-2010/
    hope this will help -
    Where Technology Meets Talent

  • ICal and Exchange Server 2003

    Hello from Barcelona,
    I am a new mac user trying to sync iCal with Exchange Server 2003. I have followed all instructions regarding domain, user name, password and URL address but it does not work. The last answer received was "account info not found" & "“HTTP/1.1 440 Login Timeout”. Incredible but when using the program AddressX (downloaded from internet) with the above mentioned configuration...it works and can get my company's global book address.
    Just to make sure I am following all "mac" rules. What I am using is:
    Domain/UserName
    Password
    https://company.com/exchange/User.Name
    Am I missing any important thing? Please help!!
    Thanks in advanced!!

    There are several discussions regarding this same topic on the Apple forums and elsewhere. None of them have solved the problem. This seems to be an issue that has been around for a long time but never addressed by Apple or Microsoft. From some simple tests that I have done, it appears the the Microsoft Exchange Server is not interpreting the iCal event (.ics extension) properly. I have seen discussions saying that Apple is not formatting the event properly or is using a newer standard that MS Exchange does not support. I believe it is the later as I can make the event work properly without any software changes but I have to do some steps manually. Here is how I can make it work and why I believe something is wrong in MS Exchange:
    - create event in iCal and add an Outlook user
    - send the event/email (ignore this email on the PC as it does not work)
    - open the just sent email and save the attached iCal event
    - find the saved iCal event and add a letter to the extension such as ".icss"
    - (Note: I don't know if there is a way to rename an attachment already in a message)
    - attach this renamed event to a new message and send it to the Outlook user
    - the Outlook user must open the message, save the attachment and rename it back to ".ics"
    - double clicking / opening this renamed file now works perfectly in Outlook
    Now, if I could only automate some of these steps on the Mac before I send the message would be very helpful. This is not a great solution but I use it for events that I want to sync between my home Mac and my office PC.
    Because the renamed attachment (.icss) works through Exchange (by ignoring it), I am lead to believe that MS Exchange will interpret an ".ics" extension and mess up the handling of it for some reason. Microsoft is never one to follow standards very carefully or adopt them very quickly. Our company is using Exchange 2003 so maybe that is part of the problem as it is an older version.

  • Microsoft Exchange Server 2003 and Windows 8 Compatibility

    Is there a fix or workaround for accessing email via Outlook 2013 (Windows 8) when your company uses Microsoft exchange server 2003 and has not plans on upgrading it any time soon. I am a remote employee so I am the only one that has this problem in the
    company. I can access email through an owa account but it's a pain. I tried to set up a rule to have all incoming mail forwarded to my gmail account in Outlook 2013, but that did not work. Any other ideas?

    If server has enabled ActiveSync you can use Windows 8 Mail Client - works almost like Outlook.
    AFAIR Outlook 2013 can't work with Exchange 2003.
    Regards, Konrad Sagala, MCT, MCSE+M, MCITP: Exchange 2007/2010, Lync 2010, Office365, Windows 2008, Virtualization

  • Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

    Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

    the iPhone uses active sync. Desktop clients do not. Desktop clients use another exchange protocol (which i can't remember as i'm not a microsofty).
    Just because you can access via active sync doesn't mean you can access it by other methods, and vice versa.

Maybe you are looking for

  • Error Message - PLEASE HELP!

    I've always been able to use my iPod with my computer since I got it. Just yesterday it was working fine but when I just plugged it in now an error message popped up: iTunes has detected an iPod that appears to be corrupted. You may need to restore t

  • What commands/templates/Saved Tasks do you add in your ARD3 Admin?

    I posted this question two years ago - thought it might be good to revisit. Saved UNIX commands: +good for slower machines and power users:+ defaults write com.apple.finder DisableAllAnimations -bool YES +set ARD Computer Information fields; change -

  • How do I get a Badge Counter in UITableViewCell on iPhone

    Hi folks, So mail has a grey oval counter with white text next to my inbox on the iPhone to show number of unread messages and various other third party apps implement the same thing. But how do they do it. It isn't built in, it isn't a label and as

  • Blanket PO - Subsequent debit

    Hi,     I see a scenario where a blanket purchase order is created , but without the item category 'B'. The value is limited by the quantity entered in the PO and by releasing it. The invoices are posted against the PO, with the amounts in the invoic

  • AUTO TO not happening

    hi experts. we r in is retail,fallowing auto del & auto transfer order (picking) to delivery. issue: if order create in r3 auto TO happening,but order flown from CRM to r3 'TO' not happening that meens in this case WMTA out put type not determinig in