Exchange server 2010 DAG configuration
Dear Boss,
I would like to configure Exchange server 2010 with DAG . I have test lab . i would like to tell my test LAB setup .
One domain controller win-2008 X 64 Ent
Two Exchange server 2010 ( Role - Client Access, Mailbox) Each Server Two Network Cards with Different Classes
IP 192.168.44.50 , 51
IP 10.0.0.10 , 20
One Exchange server 2010 ( Role - Hub Transport )
IP 192.168.44.53
Pls tell me how can i create DAG
Note:- i would like to test below steps
1. Exchange server1 may be down or network link down how server 2 to work automatically without any disturbance
2. Exchange server2 may be down or network link down down how server 1 to work automatically without any disturbance
3. Hub transport server maybe down how it can be work ?
Regards
Subash
Hi Suriya,
To create a DAG, simply use the below commands from Exchange Management Shell:
New-DatabaseAvailabilityGroup -Name "DAGNAME" -WitnessServer HUBSERVERNAME
Add-DatabaseAvailabilityGroupServer –Identity DAGNAME -MailboxServer ExchangeServer1
Add-DatabaseAvailabilityGroupServer –Identity DAGNAME -MailboxServer ExchangeServer2
New-MailboxDatabase -Name DB1 -Server
ExchangeServer1
Add-MailboxDatabaseCopy -Identity DB1 -MailboxServer
ExchangeServer2
You can run your tests now, by restarting any of the servers, and you should be able to see the DB1 will automatically failover & failback between the nodes with out any intervention.
for the HUB transport you must have another server to achieve high availability, so you can install the HUB role on a different server or add it to one of your existing servers.
Mohammad Saeed | MCSE 2003 | MCTS: Lync, OCS, Exchange
Similar Messages
-
Exchange Server 2010 - DAG - Physical and Virtual
Hi All,
we are trying to configure Exchange Server 2010 SP1 DAG with TWO Servers, we are getting the error sector size on log file header was mismatch
1) Physical Server - when we check the sector size on log file - 512 bytes (RAID5)
2) Virtual Server - when we check the sector size on log file - 4096 bytes
is there any workaround to solve this issue or do i need to re-install the physical server with 4096 sector size..
When i check the Volume details on both machine
1)
Bytes Per Sector : 512
Bytes Per Physical Sector : <Not Supported>
Bytes Per Cluster : 4096
Bytes Per FileRecord Segment : 1024
2)
Bytes Per Sector : 512
Bytes Per Physical Sector : 4096
Bytes Per Cluster : 4096
Bytes Per FileRecord Segment : 1024
MCITPHi Jared,
I've got a question regarding your answer.
We have an existing Exchange 2010 DAG configuration with 3 mailbox servers in NL and 3 in the UK.
2 for normal databases at each site and 1 for Archive databases at each site.
The current Mailbox servers for the Archive databases are Hyper V 2008 R2 based VM's with a passthrough for storing the databases.
We now want add 1 new Mailbox server for storing archive databases at each site and add them to the DAG.
Can we use Windows 2012 Hyper-V hosts and create the new VM's with 4k sectorsize vhdx files for the new mailbox servers ?
Regards
Misha Verhoeven -
Exchange server 2010 DAG failover
Hi team ,
We have configured exchange server 2010 in DAG environment .
We have added 3 mailbox server in DAG . but my active mailbox copy failed the database are failover to another passive copy server & status is mounted . after failover emails service are not working.
Note : We have also configured NLB on CAS server .All exchange servers placed in single AD site
Please suggestHi
So are all your exchange servers the same? settings?
have you tried to fail the DB back to its original server? all services started on the other server? -
Exchange Server 2010 DAG requirement
Hi i am configuring Exchange server 2010 with DAG. i read that Enterprise level OS must have needed for MS-Exchange DAG
but i have 4 Windows Server 2012 standard. can i configure my DAG setup on it?
It will be like 4 hyperv
DAG Node 1 – Windows Server 2012 standard.(MS-Exchange 2010)
DAG Node 2 – Windows Server 2012 standard.(MS-Exchange 2010)
Domain Controller – Windows Server 2012 standard.
FSW Server – Windows Server 2012 standard.
Is it right environment setup for DAG?Hello,
For Exchange 2010 DAG installation you need:
1. Windows 2012 Standard or Datacenter.
2. Windows 2008 R2 Enterprise or Datacenter.
Each node of DAG must have the same version of OS, both version and edition.
Your setup will be fully supported.
Hope it helps,
Adam
http://www.codetwo.com/?sts=3470 If this post helps resolve your issue, please click the 'Mark as Answer' or 'Helpful' button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster. -
Hi,
I am new to the servers and domains stuff. Therefore i have setup succesfully a Server 2008 R2 server with AD, DHCP, DNS roles installed. I configured the roles as i wanted and then i installed Exchange Server 2010 so the clients can use Outlook to send
receive mails in and out of the domain.
I can send/receive mails inside the domain (disalfa.com) but i cannot send/receive mails outside the domain. I configured the Exchange properly, i am sure of that. I am 99,9% i did something wrong with the DNS (A records, MX records, etc.).
Also is there something i must do from the control panel of the site i purchased the domain name and the mails?
Can someone guide me so i can manage to work this out?
Server 2008 - 192.168.1.250
Registered Domain - disalfa.com
Thank you in advanceHi ,
I recommend you refer to the following article to configure your external mail flow:
Configure Internet Mail Flow Directly Through a Hub Transport Server
Prerequisites
Register MX resource records for all accepted domains in a public domain name system (DNS) server. Consult the documentation of your DNS provider for information about how to register MX records for your domain. Detailed procedures about how to complete
this step are outside the scope of this topic.
Configure network gateways to allow SMTP traffic to and from the Hub Transport server. Consult the documentation for your network routers and firewalls for information about how to route SMTP traffic to and from the Hub Transport server. Detailed procedures
about how to complete this step are outside the scope of this topic.
Best regards,
Niko Cheng
TechNet Community Support -
Restoer exchange server 2010 DAG
hi
could you please let me know the prerequisite for restoration of exchange 2010 DAG which has broken one months ago.
<p>Don't forget to mark helpful or answer</p> <p>connect me :-</p> <p>http://in.linkedin.com/in/satya11</p> <p>http://facebook.com/satya.1000</p>Hi Satya,
If you are trying to recover a failed DAG member please check this
http://exchangeserverpro.com/exchange-recovery-failed-dag-member-exchange-server-2010/
If you are trying to recover Entire DAG Please check this
https://technet.microsoft.com/en-us/library/gg513521(v=exchg.141).aspx
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Moving the mailbox database copy from one exchange server to another exchange server 2010 DAG
Hello Team
is it possible to the move the passive copy of database and logs from one server to another exchange server in the same DAG with out removing and deleting the mailbox database copies in exchange 2010
normaly procedure is
Remove the mailbox database copies and manually delete the .edb files and logs from the physical location and re-add the mailbox database copy to the new server in the DAG.
is that any way to achieve to move the passive database copy to another exchange 2010 server in the same DAG ?From your note, you appear to have a two-member DAG (with a server hosting your active database, and a second hosting the passive copy), and you want to move your passive database copy from the current passive server to another. Your note
about what "the normal procedure is" isn't 100% correct - there are many ways to handle this task, and all can be considered "normal". Why not just add the third server to the DAG and
add a database copy on that third server? Once it is fully seeded, you can remove the current passive copy. This way, you never lose your redundancy.
Yes i can add the third and fourth serve in DAG , but i cannot add the mailbox database copies to the 3rd and 4th mailbox server in DAG as am using RTM version of exchange 2010 which is allowing to have only 5 database inclding mailbox datbase copies
and also currently my lab setup is two member dag (with a server hosting your active database,
and a second hosting the passive copy) in the same site named SITE A
and recently i have created new SITE B and included the 3rd and 4th DAG members in the same DAG
i want the mailbox database copies from the mailbox server database in SITE A to
Mailbox server database in SITE B as passive copy
That is why i want to move the mailbox database without deleting / removing it manually
Hope you understand my situation! -
How to configure Mailbox Read-Only access for Mailbox's owner on Exchange Server 2010?
I have to configure the Exchange Server 2010's mailbox to only grant Read-Only Access on the mailbox's owners. So they can only allowed to read their messages and cannot modify or remove them. Are there any references or methods to do?
Hi,alexchy8
We can make use of 2 PowerShell commands to achieve this goal.
Add-MailboxPermission and Add-MailboxFolderPermission.
Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
You can read the following article as reference:
http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards. -
DAG in exchange server 2010 across different sites
hello ;
I want to know the best way to implement DAG for exchange server 2010 across 2 sites in the same domain ,
I have 2 exchanger server in one site in DAG ,with 300 gb database size
but I want to implement exchange server 2010 in a new site within the same domain and this will be my 3rd exchange server and will be a member on my existing DAG in the head office
the new site is linked to my head office using ipvpn connection which is 6 mb , and ADC is there in the new site,
what is the best way to implement the new exchange server in the new site to join the existing DAG .
is there is any problem related to DAG in this scenario ?
what is the best way to implement this scenario ?
ThanksHi,
For each AD site, it is recommended to have at least there Exchange roles: CAS, HUB, and MBX roles.
Do you plan to have active users in this new site?
If there are active users in this new site, you can deploy a Three-Member DAG in two AD sites. However, it is recommended to deploy two DAGs in two AD sites and you should have at least two DAG members each AD site. This scenario, two witness servers in
separate site is necessary.
If the new site is only for DR purpose, you can install this new Exchange server and add it to DAG. After that, add database copy to this new server.
Besides that, here are two articles which may help you for your reference.
Database Availability Group Design Examples
http://technet.microsoft.com/en-us/library/dd979781(v=exchg.141).aspx
Understanding Database Availability Groups
http://technet.microsoft.com/en-us/library/dd979799(v=exchg.141).aspx
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
We need to install and configure Exchange Server 2010 with DR(disaster recovery on Server 2012.
Pls suggest step by step.
Pankaj KumarHi,
Here is an article which may help you for your reference.
Deploying High Availability and Site Resilience
https://technet.microsoft.com/en-us/library/dd638129(v=exchg.141).aspx
Besides, there is a related thread here.
https://social.technet.microsoft.com/Forums/exchange/en-US/577c9433-a20b-442e-8ce7-be59aea35855/preparation-for-deploying-exchange-2010-servers-at-remote-site-dr-site?forum=exchangesvrdeploylegacy
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support -
How to configure canon ir 2250 to send scans to emails via exchange server 2010
Hello
I have one question:
How to configure canon ir 2250 to send scans to emails via exchange server 2010?Hi,
Based on my research, the member limit of a distribution list depends on the scalability and performance of your environment:
http://blogs.technet.com/b/exchange/archive/2009/02/19/3407003.aspx
Thanks,
Angela Shi
TechNet Community Support -
BlackBerry Not showing e-mail subfolders configured on my Exchange Server 2010
Salutations Good People,
I recently activated my Blackberry Curve 8520 with my BlackBerry Entreprise Server which is synced with Ms Exchange server 2010, the problem is that on my Curve i can only see emails sent to my Inbox but any emails under my Exchange Mailbox subfolders are not being displayed on my Curve although the actual subfolder are shown on my Curve but inside them there is always empty, Please assist
Kindest Regards
BenjieHi benjrix
To receive emails that arrive in subfolders, you will have to enable folder redirection. The following article will show you how to configure folder redirection for your BlackBerry® smartphone.
KB04297 - How to configure folder redirection to receive email messages delivered to folders other t...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Exchange server 2010 redundancy using static IPs in different sites
Dear All;
We are facing a problem in Exchange server 2010 which is that we need to provide redundancy for two different sites which contain the same exchange databases using DAG but the issue is that if the main exchange server fails, users from the internet will
not be able to access the server because the main static IP is in the main site ...
========================================
My question is how to provide redundancy using two Global IPs in two different sites, and is there any consequences of doing such a setup?
========================================Hi,
From your description, I would like to clarify the following things:
1. It is recommended to configure the IP Configuration for both the MAPI and Replication NIC on DAG nodes.
2. A site failure is managed differently from the types of failures that can cause a server or database failover. A site failure is considered to be a disaster recovery event, recovery should be manually performed and completed for the client service to
be restored and for the outage to end.
For more information, here is an article for your reference.
Switchovers and Failovers
http://technet.microsoft.com/en-us/library/dd298067(v=exchg.141).aspx
Besides, what do you mean by "global IPs"?
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
SBS 2003 to 2011 Migration - Exchange Server 2010 cannot be installed
Hello,
We have a Small Business Server 2003 server that we are trying to migrate to SBS 2011 using the out of the box migration process. After the install, the SBS console showed a couple installation issues - the big one turned out to be "Exchange Server
2010 cannot be installed".
Here is the end of 'ExchangeSetup.log' showing various error messages:
[11/29/2014 23:00:07.0489] [2] Active Directory session settings for 'Get-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0490] [2] Beginning processing get-exchangeserver -Identity:'MB-MAINSERVER04' -DomainController:'MB-MAINSERVER04.Contoso.local' -ErrorAction:'SilentlyContinue'
[11/29/2014 23:00:07.0506] [2] Searching objects "MB-MAINSERVER04" of type "Server" under the root "$null".
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[11/29/2014 23:00:07.0522] [2] Unexpected Error
[11/29/2014 23:00:07.0522] [2] The operation couldn't be performed because object 'MB-MAINSERVER04' couldn't be found on 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0523] [2] Ending processing get-exchangeserver
[11/29/2014 23:00:07.0523] [1] Executing:
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
[11/29/2014 23:00:07.0545] [2] Active Directory session settings for 'New-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0545] [2] Beginning processing new-exchangeserver -DomainController:'MB-MAINSERVER04.Contoso.local' -Name:'MB-MAINSERVER04'
[11/29/2014 23:00:07.0599] [2] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0600] [2] Ending processing new-exchangeserver
[11/29/2014 23:00:07.0607] [1] The following 1 error(s) occurred during task execution:
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.SystemConfiguration.DefaultAdministrativeGroupNotFoundException: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroup()
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroupId()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServer.PrepareDataObject()
at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[11/29/2014 23:00:07.0609] [1] [ERROR] The following error was generated when "$error.Clear();
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
" was run: "Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.".
[11/29/2014 23:00:07.0609] [1] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0609] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___84489810458648f5ac6e47811394a284 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/29/2014 23:00:07.0610] [1] Setup is stopping now because of one or more critical errors.
[11/29/2014 23:00:07.0610] [1] Finished executing component tasks.
[11/29/2014 23:00:07.0618] [1] Ending processing Install-BridgeheadRole
[11/29/2014 23:00:07.0626] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[11/29/2014 23:00:07.0633] [0] End of Setup
[11/29/2014 23:00:07.0633] [0] **********************************************
[11/29/2014 23:39:03.0429] [0] **********************************************
[11/29/2014 23:39:03.0435] [0] Starting Microsoft Exchange Server 2010 Setup
[11/29/2014 23:39:03.0435] [0] **********************************************
[11/29/2014 23:39:03.0456] [0] Local Time Zone: (UTC-08:00) Pacific Time (US & Canada).
[11/29/2014 23:39:03.0457] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[11/29/2014 23:39:03.0469] [0] Setup version: 14.1.438.0.
[11/29/2014 23:39:03.0473] [0] Logged on user: Contoso2K3\Administrator.
[11/29/2014 23:39:06.0763] [0] Command Line Parameter Name='mode', Value='Install'.
[11/29/2014 23:39:06.0776] [0] ExSetupUI was started with the following command: '-mode:install'.
[11/29/2014 23:39:07.0413] [0] Setup is choosing the domain controller to use
[11/29/2014 23:39:07.0730] [0] Setup is choosing a local domain controller...
[11/29/2014 23:39:08.0459] [0] Setup has chosen the local domain controller MB-MAINSERVER04.Contoso.local for initial queries
[11/29/2014 23:39:08.0747] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use MB-MAINSERVER04.Contoso.local
[11/29/2014 23:39:08.0748] [0] Setup is choosing a global catalog...
[11/29/2014 23:39:08.0758] [0] Setup has chosen the global catalog server MB-MAINSERVER04.Contoso.local.
[11/29/2014 23:39:08.0819] [0] Setup will use the domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0820] [0] Setup will use the global catalog 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0823] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0830] [0] Exchange organization container for the organization is 'CN=Contoso2K3,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0867] [0] Setup will search for an Exchange Server object for the local machine with name 'MB-MAINSERVER04'.
[11/29/2014 23:39:08.0914] [0] No Exchange Server with identity 'MB-MAINSERVER04' was found.
[11/29/2014 23:39:09.0061] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[11/29/2014 23:39:09.0062] [0] The following datacenter roles are unpacked:
[11/29/2014 23:39:09.0064] [0] The following roles are installed: AdminToolsRole
[11/29/2014 23:39:09.0066] [0] The local server has some Exchange files installed.
[11/29/2014 23:39:09.0320] [0] Setup will use the path 'C:\Program Files\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1' for installing Exchange.
[11/29/2014 23:39:09.0332] [0] The installation mode is set to: 'Install'.
[11/29/2014 23:39:13.0558] [0] An Exchange organization with name 'Contoso2K3' was found in this forest.
[11/29/2014 23:39:13.0560] [0] Active Directory Initialization status : 'True'.
[11/29/2014 23:39:13.0561] [0] Schema Update Required Status : 'False'.
[11/29/2014 23:39:13.0562] [0] Organization Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0563] [0] Domain Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0564] [0] The locally installed version is 14.1.218.15.
[11/29/2014 23:39:13.0565] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V14'.
[11/29/2014 23:39:13.0920] [0] Applying default role selection state
[11/29/2014 23:39:13.0961] [0] Setup is determining what organization-level operations to perform.
[11/29/2014 23:39:13.0962] [0] Because the value was specified, setup is setting the argument OrganizationName to the value Contoso2K3.
[11/29/2014 23:39:13.0963] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V14\'.
[11/29/2014 23:39:13.0972] [0] InstallModeDataHandler has 0 DataHandlers
[11/29/2014 23:39:13.0972] [0] RootDataHandler has 1 DataHandlers
[11/29/2014 23:39:15.0491] [0] Setup encountered an exception when trying to access the setup state file: Could not find file 'C:\ExchangeSetupLogs\exchangeInstallState.xml'.
[11/29/2014 23:39:26.0117] [0] End of Setup
[11/29/2014 23:39:26.0117] [0] **********************************************
I should add that the source server's AD configuration might not be perfect due to this being the second attempt at a SBS 2011 migration install.
I'd be grateful for any help I can get on this as SBS migration has been plauged with multiple setbacks already. I really need to get this done! ;)
Thanks,
VoonThank you Larry and Al for your replies.
I used the 'official' migration
guide plus this page (http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/)
as my migration references. The SBS migration prep tool gave no errors on the source server when I ran it.
I have a full system drive image plus a a system state backup from before migration. Though I am very loathed to rollback the migration and attempt a new one - again. I will do some searching to see if I can resolve the Exchange server problem and continue
the migration/installation. If not, then its a system state restore for me. One of Al's links had a resource for doing a thorough check of AD - which something I'd run if I have to another migration attempt.
I am also really tempted to open up a paid MS support ticket for them to help me fix this problem. :) -
Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx
Maybe you are looking for
-
On MSN I can not view Cam or peoples videos they send
anyone know the answer?
-
Compressor 2 not working in FCP 5
I'm having a problem with Compressor 2 and FCP 5. For the past several months, I had FCP 5 and Compressor 2 working on my 800ghz G4 Titanium powerbook. No problems. However, I needed to go back to FCP 4.5 for compatibility issues with other machines
-
I am trying to add some B&W photos that I scanned. In a previous post I was advised to convert any grayscale pix to RGB. Is there a way to convert using os x 10.3.9? I think I figured it out in photoshop. When I open the pic in preview and select "ge
-
I received a new nano and when I plugged it in, all of my daughter's music synced. Can I get rid of all that music from my nano?
-
How to create a sort of drop down menu at mouse location please?
Hello, I would like to create a sort of drop down menu. When the user right clicks, I would like to create something similar as if you right click in your browser, or right click in this forum text box area (you get "undo", "copy", "paste".. that app