Exchange Server 2013 not receiving emails

I have a new Exchange 2013 mail server installation (no migration - completely new domain and everything). For some reason the server is not accepting mail from the Internet. My router is indicating it is forwarding SMTP packets to the Exchange
server's IP address, but nothing shows up in the message queues or users mailboxes. The event viewer is giving me no clues. No errors. This is a simple installation - one Server 2012 DC and the Exchange server. One Exchange server in
a domain environment. The receive connector looks correct. It is using port 25 and I indicated to use the IP address of the Exchange server network card. Any ideas as to how to configure the receive connector? Thanks!

Greylisted is an anti spam check done on exchange. However to me this would meanone of two things.
1: The inbound email domain is listed not your exchange server. Your Exchange server seems to be set up to only allow inbound mail from specific domains perhaps instead of * (All).
2: More likely i think is that your domain is not set up in Exchange.
In order to test the product you probably want to create your own domain, and that is easily done in the Exchange Admin Center by clicking the Mail Flow item
and then Accepted Domains in the tab area and finally the Add… icon, <o:p></o:p>
Type in the information and click Save,
the new domain will show up on the List View.<o:p></o:p>
For reference you can check if your domain is blacklisted here: http://mxtoolbox.com/blacklists.aspx but i am sure this is not your issue.
Martin

Similar Messages

Exchange Server 2013: Not Receiving Internet email

Hello Guys, I have a new Exchange 2013 install and i am having problems receiving internet email. When testing from https://www.testexchangeconnectivity.com it fails at the last step when it tries to send a test email. I get the following response:
The server returned status code 451 - Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
Exception details:
Message: Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
Type: System.Net.Mail.SmtpException
Stack trace:
at System.Net.Mail.DataStopCommand.CheckResponse(SmtpStatusCode statusCode, String serverResponse)
at System.Net.Mail.DataStopCommand.Send(SmtpConnection conn)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at Microsoft.Exchange.Tools.ExRca.Tests.SmtpMessageTest.PerformTestReally()
Any Suggestions??

http://gerhardwessels.wordpress.com/2013/05/06/451-4-7-0-temporary-server-error-please-try-again-later-prx2/
Check the above mentioned settings

Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured

Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured.
[PS] C:\Windows\system32>Get-TransportConfig
AddressBookPolicyRoutingEnabled                             : False
AnonymousSenderToRecipientRatePerHour                : 1800
ClearCategories
: True
ConvertDisclaimerWrapperToEml                               : False
DSNConversionMode
: UseExchangeDSNs
ExternalDelayDsnEnabled                                     : True
ExternalDsnDefaultLanguage                                  :
ExternalDsnLanguageDetectionEnabled                         : True
ExternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
ExternalDsnReportingAuthority                               :
ExternalDsnSendHtml
: True
ExternalPostmasterAddress                                   : [email protected]
GenerateCopyOfDSNFor                                        :
HygieneSuite
: Standard
InternalDelayDsnEnabled                                     : True
InternalDsnDefaultLanguage                                  :
InternalDsnLanguageDetectionEnabled                         : True
InternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
InternalDsnReportingAuthority                               :
InternalDsnSendHtml
: True
InternalSMTPServers
: {127.0.0.1}
JournalingReportNdrTo                                       : <>
LegacyJournalingMigrationEnabled                            : False
LegacyArchiveJournalingEnabled                              : False
LegacyArchiveLiveJournalingEnabled                          : False
RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
RedirectDLMessagesForLegacyArchiveJournaling                : False
MaxDumpsterSizePerDatabase                                  : 18 MB (18,874,368 bytes)
MaxDumpsterTime
: 7.00:00:00
MaxReceiveSize
: 50 MB (52,428,800 bytes)
MaxRecipientEnvelopeLimit                                   : 5000
MaxRetriesForLocalSiteShadow                                : 2
MaxRetriesForRemoteSiteShadow                               : 4
MaxSendSize
: 20 MB (20,971,520 bytes)
MigrationEnabled
: False
OpenDomainRoutingEnabled                                    : False
RejectMessageOnShadowFailure                                : False
Rfc2231EncodingEnabled                                      : False
SafetyNetHoldTime
: 2.00:00:00
ShadowHeartbeatFrequency                                    : 00:02:00
ShadowMessageAutoDiscardInterval                            : 2.00:00:00
ShadowMessagePreferenceSetting                              : PreferRemote
ShadowRedundancyEnabled                                     : True
ShadowResubmitTimeSpan                                      : 03:00:00
SupervisionTags
: {Reject, Allow}
TLSReceiveDomainSecureList                                  : {}
TLSSendDomainSecureList                                     : {}
VerifySecureSubmitEnabled                                   : False
VoicemailJournalingEnabled                                  : True
HeaderPromotionModeSetting                                  : NoCreate
Xexch50Enabled
: True

hi stephan... lets put in this way... are you sending attachment ...did you checked the max attachment size as mail send size and attachment size are two different things.. please check this for info on different size creteria
http://technet.microsoft.com/en-us/library/bb124345%28v=exchg.150%29.aspx
can you please share the output of below three commands... i doubt your receive connector is not configured properly.
Get-TransportConfig | Format-List -Property MaxReceiveSize, MaxSendSize
Get-SendConnector | Format-List -Property Identity, MaxMessageSize
Get-ReceiveConnector | Format-List -Property Identity, MaxMessageSize
you can also check this link which gives a perfect info on how exchange works for email size... http://rajisubramanian.wordpress.com/2014/01/26/exchange-server-2013-message-size-configuration-detail/
Mark as useful or answered if my replies helped you solving your query.
Thanks, Happiness Always
Jatin
Skype: jatider2jatin, Email: [email protected]

Exchange server 2007 stop receiving emails

i have a strange issue with our exchange 2007 server, and i hope any one can help me, each day i have one of our exchange servers can't receive emails, and all emails sent to users in this servers are queued in the sending email server, and i have to manually
restart the Microsoft exchange transport service in this server so that it's able to receive emails, i found an error in the server that always repeated with different parameters
the error is
Error ID: 4999
Error Source: MSExchange Common
Watson report about to be sent to dw20.exe for process id: 3508, with parameters: E12, c-RTL-AMD64, 08.02.0254.000, edgetransport, M.E.Transport, M.E.P.S.SmtpInServer.HandleConnection, System.NullReferenceException, 69f8, 08.02.0254.000. ErrorReportingEnabled:
False
i receive the same error each time the server stop responds but the parameters is changed each time (Process ID number always changed) like below
Watson report about to be sent to dw20.exe for process id: 3644, with parameters: E12, c-RTL-AMD64, 08.02.0254.000, edgetransport, M.E.Transport, M.E.P.S.SmtpInServer.HandleConnection, System.NullReferenceException, 69f8, 08.02.0254.000. ErrorReportingEnabled:
False
i hope any one can help me solving this problem
the server is windows server 2008
Exchange 2007 SP2 Server Rollup 5
McAfee Enterprise Antivirus is in the box
Backup Exec Agent is in the box Also
a lot of transport rules applied to our exchange organization
Mahmoud Sabry IT System Engineer

Hi
As per the information and details provided by you, Exchange server 2007 stop receiving emails, then please follow these steps: -
If you do have a 60 GB partition on the C: drive, one of the first signs of trouble is when the free space on C: drops below 2GB. Exchange 2007 stops receiving external
emails. This is caused by a condition known as Back Pressure.
Please check the following: -
Check the nslook up for correct MX record.
Run the exbpa and llok for any recent changes.
Check for the device in perimeter network which accepts connections on port 25 FW or any other anti spam device).
Try to run a telnet session from the firwall and then out side and drop email on the server.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Exchange Server 2013 SP1 - Internal Email Flow slowness

Hi Fellows,
I have a brand new implementation of Exchange Server 2013 SP1 with three mailbox servers and 3 CAS servers.
I am facing a considerable slow transportation of email internally. although there are just 3 mailboxes on the infrastructure at the moment.
When a user sends email to himself or other two accounts, delivery takes from 15 seconds to 35 seconds to be delivered.
Experience is same even if the email is sent from OWA, ActiveSync or Outlook.
Header analysis shows the message exchange between mailbox servers is taking time. any clue?
Decreasing Tarpit interval on Mailbox server receive connectors will be helpful?
Network communication, Storage performance, Server performance are all as good as we love to.
Thanks.
J.A

Hello,
When a user send message to a internal user in a AD site, the connector will not be used. I recommend you use message tracking to check the issue occur on server side or transport process. Please use queue viewer to check if there is mail traffic.
Cara Chen
TechNet Community Support

Trying to install Exchange Server 2013 and receive this error.

Hello,
I have a computer running Windows Server 2012 R2 Standard. I have completed all the prerequisites to install Exchange Server 2013. It all was going good until the install started. Then I received the below error. Does anyone have any suggestions? I am new
to Exchange Server so would thank and appreciate any help I could get to resolve this issue.
Thank You,
Stan
Error:
The following error was generated when "$error.Clear();
initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions
" was run: "Microsoft.Exchange.Management.Tasks.InvalidWKObjectException: The well-known object entry B:32:A7D2016C83F003458132789EEB127B84:CN=Exchange Servers\0ADEL:16cd035a-6201-492f-b85f-1e28cc9f9ee0,CN=Deleted Objects,DC=MULTIAXCNC,DC=local on
the otherWellKnownObjects attribute in the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=MULTIAXCNC,DC=local points to an invalid DN or a deleted object. Remove the entry, and then rerun the task.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription, GroupTypeFlags groupType, Boolean createAsRoleGroup)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

Here is the error I am getting and the last setup log I can find. Any help how to get past the error would be helpful.
Thank You,
Stan
Error
The following error was generated when "$error.Clear();
          Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController
        " was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.AddAccessRuleCryptographicException: Could not grant Network Service access to the certificate with thumbprint 845C42A131A8A73487400A91491182FB95B81612
because a cryptographic exception was thrown. ---> System.Security.Cryptography.CryptographicException: Access is denied.
   at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.CAPIAddAccessRule(X509Certificate2 certificate, AccessRule rule)
   at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.AddAccessRule(X509Certificate2 certificate, AccessRule rule)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.ManageExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services, String websiteName, Boolean requireSsl, ITopologyConfigurationSession dataSession, Server server,
List`1 warningList, Boolean allowConfirmation, Boolean forceNetworkService)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Setup Log Below
# Default Install steps for ClientAccessRole.
# Programmatically generated on 7/5/2014 10:58:24 PM.
# Variable Declarations
$RoleAllRoles = 'BridgeheadRole,GatewayRole,ClientAccessRole,MailboxRole,UnifiedMessagingRole,FrontendTransportRole,AdminToolsRole,MonitoringRole,CentralAdminRole,CentralAdminDatabaseRole,CentralAdminFrontEndRole,LanguagePacksRole,CafeRole,FfoWebServiceRole,OSPRole'
$RoleBinPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Bin'
$RoleCustomerFeedbackEnabled = $True
$RoleDatacenterPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Datacenter'
$RoleDatacenterServiceEndpointABCHContactService = '<ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation2 = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation2.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveFederationMetadata = '<ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveGetUserRealm = '<ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveServiceLogin2 = '<ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointMsoFederationMetadata = '<ServiceEndpoint><Url>https://nexus.microsoftonline-p.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDomainController = 'MULTIAX2012.MULTIAXCNC.local'
$RoleExternalCASServerDomain = $null
$RoleFqdnOrName = 'MULTIAX2012.MULTIAXCNC.local'
$RoleInstallationMode = 'Install'
$RoleInstallPath = 'C:\Program Files\Microsoft\Exchange Server\V15\'
$RoleInvocationID = '20140705-2258240578829153548'
$RoleIsAdminToolsRoleInstalled = $True
$RoleIsBridgeheadRoleInstalled = $True
$RoleIsDatacenter = $False
$RoleIsDatacenterDedicated = $False
$RoleIsFfo = $False
$RoleIsPartnerHosted = $False
$RoleLanguagePacksPath = 'C:\Exchange\'
$RoleLoggedOnUser = 'MULTIAXCNC\Administrator'
$RoleLoggingPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Logging'
$RoleNetBIOSName = 'MULTIAX2012'
$RoleNoSelfSignedCertificates = $False
$RolePreviousVersion = $null
$RoleProductPlatform = 'amd64'
$RoleRoleName = 'ClientAccessRole'
$RoleRoles = 'BridgeheadRole,AdminToolsRole'
$RoleSetupLoggingPath = 'C:\ExchangeSetupLogs'
$RoleTargetVersion = '15.00.0913.022'
$RoleUpdatesDir = $null
# Component tasks
# Tasks for 'All Roles Common First' component
# [ID = AllRolesCommonFirst___3e69ba31a53e4c29a2d6bffcf78cc614, Wt = 5, isFatal = True] "Starting the WMI service."
7/5/2014 10:58:24 PM:
          if (Get-Service winmgmt* | ?{ $_.Name -ieq "winmgmt" })
            Set-Service winmgmt -StartupType Automatic
            Start-SetupService -ServiceName winmgmt
# [ID = AllRolesCommonFirst___56139ce4432346ecb7936afae4c3a9cc, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
          & $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoleName.Replace('Role','')
# [ID = AllRolesCommonFirst___edc23bc11a4e4119a6a4ee802ff1ea49, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
          if ($RoleRoles)
            & $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoles.Replace('Role','').Split(',')
# [ID = AllRolesCommonFirst___62f13a063b2846a5ab20765bb7a3fc51, Wt = 5, isFatal = True] "Starting the Remote Registry service."
7/5/2014 10:58:25 PM:Start-SetupService -ServiceName RemoteRegistry
# [ID = AllRolesCommonFirst___00573a17b6e34c26842a6646830d57fa, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:25 PM:Set-LocalPermissions
# [ID = AllRolesCommonFirst___77668249568048d3812fb7cdba08c58b, Wt = 1, isFatal = False] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
          $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF");
          $mflFilePath = ($RoleInstallPath + "bin\en\Exchange.MFL");
          compile-moffile -MofFilePath:$mofFilePath;
          compile-moffile -MofFilePath:$mflFilePath;
# [ID = AllRolesCommonFirst___f557448f44964e5eaa5dba792a3c4f09, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCByPortRule)
# [ID = AllRolesCommonFirst___84a0f0e2c2f44db2b537e9696c26fc3e, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCEPMapByPortRule)
# Tasks for 'ClientAccess Permissions Configuration' component
# [ID = ClientAccessLocalPermissionsComponent___6246589bb8494a3580c22c26e18451d1, Wt = 1, isFatal = True] "Setting folder or registry permissions for the Mailbox role: Client Access service. "
7/5/2014 10:59:35 PM:Set-LocalPermissions -Feature:"ClientAccess"
# Tasks for 'Exchange 2003 Registry Configuration' component
# [ID = LegacyRegistryMarkersComponent___7d6dadc1069b42ac93eadd1143c04a1a, Wt = 1, isFatal = True] "Installing/Removing registry values used by Exchange 2003 components"
7/5/2014 11:00:01 PM:set-ExsetdataRegistryMarkers
# Tasks for 'Client Access Perf Counters' component
# [ID = ClientAccessPerfCountersComponent___deb99c54869843b68426390615283ab7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:01 PM:new-PerfCounters -DefinitionFileName OwaInstallSingleCounters.xml
# [ID = ClientAccessPerfCountersComponent___ca78563ec1f1468982d1a2e59c6001bd, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:15 PM:new-PerfCounters -DefinitionFileName EcpPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69a559428fb42029ca3261e795b216d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:21 PM:new-PerfCounters -DefinitionFileName RwsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___c335490f948a4b16b5e2d2ce5f1eb9e7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:26 PM:new-PerfCounters -DefinitionFileName InfoworkerAvailabilityPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5af856aa00ae485ca206c5cdd13e9128, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:31 PM:new-PerfCounters -DefinitionFileName InfoworkerSharingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___86121d1b951e43fb934f1f1d573362eb, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:35 PM:new-PerfCounters -DefinitionFileName ThrottlingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___ea5896b92c494834b1a93c4620fcaef4, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:42 PM:new-PerfCounters -DefinitionFileName MiddleTierStoragePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___dab6f03bdf5141efb7b017c3009fb9e6, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:48 PM:new-PerfCounters -DefinitionFileName ActiveManagerClientPerfmon.xml
# [ID = ClientAccessPerfCountersComponent___5471455db0ef4610bf68fe7ad9417e19, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:53 PM:new-PerfCounters -DefinitionFileName RmsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___81ad52cb2950483196b52371b4d992c8, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:58 PM:new-PerfCounters -DefinitionFileName InfoworkerMailTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___072bf6737f1c42a0a8847ce35cf8a0c7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:03 PM:new-PerfCounters -DefinitionFileName InfoworkerUserPhotosPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___50b64611f7444bb49d50e00c206d2c13, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:08 PM:new-PerfCounters -DefinitionFileName AirSyncCounters.xml
# [ID = ClientAccessPerfCountersComponent___f2620ff8c3754396a8ea7d77257e2895, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:14 PM:new-PerfCounters -DefinitionFileName ClientAccessRulesPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4ef0f16c017840a583ace9f062300207, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:19 PM:new-PerfCounters -DefinitionFileName Imap4Counters.xml
# [ID = ClientAccessPerfCountersComponent___135fb06dadd9403a83ceebb290638efe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:24 PM:new-PerfCounters -DefinitionFileName Pop3Counters.xml
# [ID = ClientAccessPerfCountersComponent___312e8d44e92b45e0809f9d3d5dc2cfc0, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:29 PM:new-PerfCounters -DefinitionFileName WsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3c333497697041cb854190ec31c17b18, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:48 PM:new-PerfCounters -DefinitionFileName UMClientAccessCounters.xml
# [ID = ClientAccessPerfCountersComponent___ba015b97cc0b4beba7b25b6cb297fcac, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:54 PM:new-PerfCounters -DefinitionFileName AutodiscoverPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3daffea50d5a4318aab4aa737e508146, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:59 PM:new-PerfCounters -DefinitionFileName OAuthCounters.xml
# [ID = ClientAccessPerfCountersComponent___c71073d7f1ab4c119af83efb513b3a9d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:04 PM:new-PerfCounters -DefinitionFileName InfoWorkerMessageTrackingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___abdaf0bf21f4473b88819ee85cada219, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:10 PM:new-PerfCounters -DefinitionFileName RpcClientAccessPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___9f160f3e42984edfa25b62424ebc05b5, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName RpcClientAccessServerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___e55cb179521a4dacbeaa588c6948cf14, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName AddressBookServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___064a7856cf7c4b0399c85cf4f3bc2f1c, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:20 PM:new-PerfCounters -DefinitionFileName RpcEntryPointsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___42325F33-A961-41FE-B6B5-5CFB3AA9820A, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:22 PM:new-PerfCounters -DefinitionFileName MapiHttpEmsmdbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4C04D747-3B5C-400A-980F-45504324EF42, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:28 PM:new-PerfCounters -DefinitionFileName MapiHttpNspiPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5ab36fffacd04975bb1bc681a214bf71, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:33 PM:new-PerfCounters -DefinitionFileName ThrottlingServiceClientPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6ca23933132d44b39d6586cb3f9f8f21, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:39 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6602c41b35254405bed412fab7d527fe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:44 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerMdbPerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___74e45a45ea8c449092a10929ae24ba4b, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:50 PM:new-PerfCounters -DefinitionFileName MlbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___a3bcb686add64cf296c8616d387d0323, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:55 PM:new-PerfCounters -DefinitionFileName MlbMultiInstancePerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___c00c15c4ef6f479b9f5deb852d8eda7d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:01 PM:new-PerfCounters -DefinitionFileName ProvisioningPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___fe1a2a7c828f4b57abc2e50dc09baddf, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:06 PM:new-PerfCounters -DefinitionFileName GalsyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___35D14CB8B01949818832943A391D77B9, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName BackSyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69599d235234effb6d2740f3c52f7e1, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName AdminAuditPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___09bd11b57f6445e890391a507262cf32, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName InfoworkerMultiMailboxSearchPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___324687361E1C473A834C22A66104679f, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName ProvisioningCachePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___98C36FFEC7944065889DB24067CFD3EE, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:21 PM:new-PerfCounters -DefinitionFileName OABRequestHandlerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___1F5A7B68C95B42568E02FAA15A05EF17, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:26 PM:new-PerfCounters -DefinitionFileName DlpPolicyTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___995DEA7A1AC5467C89939F5F8CE5F2AF, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:31 PM:new-PerfCounters -DefinitionFileName ConfigurationCachePerformanceCounters.xml
# Tasks for 'Client Access Configuration' component
# [ID = ClientAccessComponent___d5119205104847bcb275cb63b65160b6, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:35 PM:
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Owa\Bin\Microsoft.Exchange.Clients.Owa.dll");
          $appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
          precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___954344d74d8849e9ae7123b91761ed9d, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:57 PM:
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Sync\Bin\Microsoft.Exchange.AirSyncHandler.dll");
          $appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
          precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___6632d6c1d5054563942db4f180976238, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:01 PM:
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\AutoDiscover\Bin\Microsoft.Exchange.AutoDiscover.dll");
          $appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
          precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___390b4ffddd484dcb9edc01dd725e020a, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:07 PM:
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\exchweb\ews\bin\Microsoft.Exchange.Services.dll");
          $appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
          precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___178a10624c88445093855c4ede7e9b9c, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:
          . "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";
          Set-NtlmLoopbackCheck $false
# [ID = ClientAccessComponent___14a6761e144e428b93c62249acc814fe, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:install-ClientAccessIisWebServiceExtensions
# [ID = ClientAccessComponent___28fdfe8bec984e809cdeef6d4d59bf4e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:43 PM:
        if (get-service MSExchangeServiceHost* | where {$_.name -eq "MSExchangeServiceHost"})
            restart-service MSExchangeServiceHost
# [ID = ClientAccessComponent___7816256880dc4be0baf5b005b2af8cd3, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
        if (get-service MSExchangeProtectedServiceHost* | where {$_.name -eq "MSExchangeProtectedServiceHost"})
            restart-service MSExchangeProtectedServiceHost
# [ID = ClientAccessComponent___e95499b43bd1484dbc03098fb1b4e592, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:set-ExchangeServerRole -Identity $RoleFqdnOrName -IsClientAccessServer:$true -DomainController $RoleDomainController
# [ID = ClientAccessComponent___f4c48e196e374cf3af269b1cea0602c8, Wt = 1, isFatal = True] "Installing/Removing the WebReady Document Viewing service."
7/5/2014 11:04:45 PM:Install-TranscodingServiceEx
# [ID = ClientAccessComponent___f50fd59d231140eb9b2405bbed2b93d4, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          if ($RoleIsDatacenter -eq $false)
            uninstall-FBAService
# [ID = ClientAccessComponent___9fad9d51b3ec4ecdad567ab58e470be7, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          if ($RoleIsDatacenter -eq $false)
            stop-setupservice -ServiceName MSExchangeFBA
# [ID = ClientAccessComponent___1c7a7da2ab9d41bb8db75522ad28b9db, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          $tpath = "$env:SystemRoot\system32\inetsrv\microsoft.web.administration.dll";
          add-type -Path $tpath;
          $sm = new-object Microsoft.Web.Administration.ServerManager;
          if ($sm.Sites["Exchange Back End"] -eq $null)
            $ppath = "$env:SystemDrive\inetpub\wwwroot";
            $s = $sm.Sites.Add("Exchange Back End","http", "*:81:", $ppath);
            $s.ServerAutoStart = $true;
            $sb =$s.Bindings;
            $b = $sb.Add("*:444:","https");
            $sm.CommitChanges();
# [ID = ClientAccessComponent___a5f211d837784aea931b9ba55c39996d, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          Get-ExchangeServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
# [ID = ClientAccessComponent__SetInstallPathInMrsAppConfig, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          Set-InstallPathInAppConfig -ConfigFileRelativePath "Bin" -ConfigFileName "MsExchangeMailboxReplication.exe.config"
# [ID = ClientAccessComponent___765cc444ba07411aa81d58397b0401fd, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          if (!(get-service MSExchangeMailboxReplication* | where {$_.name -eq "MSExchangeMailboxReplication"}))
            install-MailboxReplicationService
# [ID = ClientAccessComponent___151b722e327b42a69411df32afdbbcbb, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationFirewallRule)
# [ID = ClientAccessComponent___7d69bb94f08245589e49eb569c6d5f4f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
          if (!(get-service MSExchangeMigrationWorkflow* | where {$_.name -eq "MSExchangeMigrationWorkflow"}))
            install-MigrationWorkflowService
# [ID = ClientAccessComponent___95f051d9dc5941c4b6014181b6e5ce93, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeABRPCFirewallRule)
# [ID = ClientAccessComponent___959c2d6566984da6b8e0e3235c1c11c2, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangePOPBeByPortRule)
# [ID = ClientAccessComponent___29864e7462374fdb84fc75eec931d8e4, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
          Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeIMAP4BeFirewallRule)
# [ID = ClientAccessComponent___052e1b794d0641ada4d6d417061af2a8, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeOWAByPortRule)
# [ID = ClientAccessComponent___975efd8911fd41cca8b17462535d710e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationByPort)
# [ID = ClientAccessComponent___023036e43f004bda9f4f4e0b1e0d233f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
          Install-ResourceHealthActiveFlags
# [ID = ClientAccessComponent___3a51c2876e2c4643bc892d2665754228, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\PushNotifications\" -ConfigFileName web.config
# [ID = ClientAccessComponent___FCC16AC1FFED43518F8292DBE770C621, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\emsmdb\" -ConfigFileName web.config
# [ID = ClientAccessComponent___E9C71786D02E40CBB1403E2E1A4B0758, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\nspi\" -ConfigFileName web.config
# [ID = ClientAccessComponent___abcab6b91ac844848c58b4ee66fcbea6, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
            ."$RoleInstallPath\Scripts\Install-OutlookServiceVirtualDirectory.ps1";
# [ID = ClientAccessComponent___9D94915F-B12D-4579-93EE-36B6DF42CF4A, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
          $CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
          $MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
          $MapiMailboxClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\emsmdb");
          $clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiMailboxAppPool_CLRConfig.config");
          Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiMailboxAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiMailboxClientAccessPath`" /applicationPool:MSExchangeMapiMailboxAppPool /path:`"/mapi/emsmdb`""
-IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___B551AAAC-0F36-428B-B1BB-3B9AFDC9EAEF, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:50 PM:
          $CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
          $MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
          $MapiAddressBookClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\nspi");
          $clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiAddressBookAppPool_CLRConfig.config");
          Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiAddressBookAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiAddressBookClientAccessPath`" /applicationPool:MSExchangeMapiAddressBookAppPool /path:`"/mapi/nspi`""
-IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___178FD1A31B5949A0B4A819E39311B1FD, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
            $ExchangeLabsRegKey = 'HKLM:\SOFTWARE\Microsoft\ExchangeLabs'
            $E4eCertificateDistinguishedNameRegValueName = 'E4eCertificateDistinguishedName'
            if ($RoleDatacenterE4eCertificateDistinguishedName -ne $null)
                New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eCertificateDistinguishedNameRegValueName -Value $RoleDatacenterE4eCertificateDistinguishedName -Force
                Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. value: $RoleDatacenterE4eCertificateDistinguishedName"
            else
                Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. Value is null."
            $E4eServiceUrlRegValueName = 'E4eServiceUrl'
            if ($RoleDatacenterE4eServiceUrl -ne $null)
                New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eServiceUrlRegValueName -Value $RoleDatacenterE4eServiceUrl -Force
                Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. value: $RoleDatacenterE4eServiceUrl"
            else
                Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. Value is null."
# [ID = ClientAccessComponent___240c7e5d07f941cfbe69a692dc33a31a, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
          ."$RoleInstallPath\Scripts\ConfigureCafeResponseHeaders.ps1";
          CreateCustomHeadersNodeForBackend 'autodiscover'
          CreateCustomHeadersNodeForBackend 'ecp'
          CreateCustomHeadersNodeForBackend 'ews'
          CreateCustomHeadersNodeForBackend 'oab'
          CreateCustomHeadersNodeForBackend 'owa'
          CreateCustomHeadersNodeForBackend 'powershell'
          CreateCustomHeadersNodeForBackend 'pushnotifications'
          CreateCustomHeadersNodeForBackend 'rpcproxy'
          CreateCustomHeadersNodeForBackend 'sync'
          CreateCustomHeadersNodeForBackend 'mapi\emsmdb'
          CreateCustomHeadersNodeForBackend 'mapi\nspi'
          CreateCustomHeadersNodeForBackend 'outlookservice'
# [ID = ClientAccessComponent___75f8c93d15314369983d33ec0742e189, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:53 PM:
          New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
# Tasks for 'POP/IMAP Backend Configuration' component
# [ID = PopImapBeComponent___d91be94d83bb4dc28e1fbdf7d94ca60e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:05 PM:
          if (!(get-service MSExchangeIMAP4BE* | where {$_.name -eq "MSExchangeIMAP4BE"}))
            install-Imap4BeService
# [ID = PopImapBeComponent___e2debc6ecabf457eb6f278096ad5102c, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          if (!(get-service MSExchangePOP3BE* | where {$_.name -eq "MSExchangePOP3BE"}))
            install-Pop3BeService
# [ID = PopImapBeComponent___7ee4dbb3fe884d26bb3e060ac68061ee, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          $file = 'Microsoft.Exchange.Pop3Service.exe.config';
          $template = $file + '.template';
          $relPath = 'ClientAccess\PopImap';
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
          $fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
          Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
          Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
          set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___9b86c2af9f364990aa196cb6e69905b6, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          $file = 'Microsoft.Exchange.Pop3.exe.config';
          $template = $file + '.template';
          $relPath = 'ClientAccess\PopImap';
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
          Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
          Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___01c604c08fd6402e9de6b3c45e3431c8, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          $file = 'Microsoft.Exchange.Imap4Service.exe.config';
          $template = $file + '.template';
          $relPath = 'ClientAccess\PopImap';
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
          $fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
          Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
          Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
          set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___2528980001a444fcb7097d123e879728, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          $file = 'Microsoft.Exchange.Imap4.exe.config';
          $template = $file + '.template';
          $relPath = 'ClientAccess\PopImap';
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
          Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
          Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___bbfdc492aaf748298977cb9b98e00029, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Imap4Container -Name:"IMAP4" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___091c98cfe0f145189c0966717496795e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Pop3Container -Name:"POP3" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___42cb9f4ac2924c27b6ebf60b92a03628, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-ImapSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# [ID = PopImapBeComponent___181f5361a5df4e7ca009f21f26f8c0d5, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-PopSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# Tasks for 'ClientAccessExchangeCertificate' component
# [ID = ClientAccessExchangeCertificate___fb5e9028e669404d94dba90aace8c2f9, Wt = 1, isFatal = True] "Installing Client Access server certificates."
7/5/2014 11:05:07 PM:
          Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController

Sharepoint Server 2013 not sending Email notification

I have a Sharepoint 2013 farm that is not sending any kind of email notifications. I also have a Sharepoint 2010 farm whit the same Outgoing Email settings and it is sending emails notifications normaly.
The SMTP service (the role) is in the same member servers of the 2013 farm, so it is reachable. The timer service is running well in both member servers of the 2013 farm. We don't have an On-premise Exchange enviroment because we use Office 365 (I cannot
set the sharepoint servers as allowed to relay in Exchange). The 2010 farm and the 2013 farm have the same Outgoing Email settings, I don´t know why the 2013 does not send emails. It is driving me crazy!.
How can I solve this?
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

What about Relay and Authentication?
Trevor Seward, MCC
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Look.
I think this is the correct configuration because it sends emails normaly with SharePoint 2010.
If I configure my own email account in Outbound Security, Sharepoint 2013 sends emails but just when I login to Sharepoint, if other users login it doesn't send emails.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Forefront for Exchange Server is not blocking emails by IP

I have 3 Servers for Exchange: Client, Mailbox, and Edge.
I have Antispam configured on my Edge server with IP Block list enabled but I am getting numerous emails from China's IP block even though I blocked all of the .cn network.
The following is entered in my IP Block list for .cn:
59.56.0.0-59.61.255.255
183.0.0.0-183.63.255.255
I confirmed server is up to date on patches, etc.
Exchange Version on all Servers:
14.03.0174.001
Forefront Version on all Servers:
11.0.713.0
However when looking at Help>About MS Forefront Protection the Exchange Version does not match...
Exchange Version Reported in Forefront
Mailbox: Exchange Version 14.03.0174.001
Client: Exchange Version 14.3.123.4
Edge: Exchange Version 14.3.123.4
Not sure if this is going to be an issue but wanted to make note of it.

no way for checking emails which use a proxy like https page to acces???
with this nice business!! phone???

Exchange Server 2013 Timestamp on Email

We have just had to resync all our physical servers and VMs because the domain controller was issuing the wrong time and date. All VMs and physical servers and DCs now have the correct time and date. Now when I send an email from Outlook the sent date and
time is still a day ahead. The Exchange server is a VM and the system time and date is correct.
This also happens if I send myself an email through OWA.

Hi,
You need to restart the AD Topologic service to re-detect the new DC.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Outlook 2013 not receiving emails I get on my iPhone

Hello Everybody! Recently I updated my laptop to Windows 8.1 and got myself Microsoft Office 2013. I am having an issue with Outlook I am not being able to solve. Thing is that all the mails I get from my hotmail account to my iPhone are not reaching my
Outlook 2013 after I have synced it with my mail.
Master tip: the last mail I have received in my outlook is from September 7 2013, the exact date I first got my iPhone and synced my mail with it. I am more than sure that my iPhone is not letting Outlook receive the mails I get when they reach my cellphone.
Please help! I love using Outlook in my work and would like even more to use it at home, it's very useful.
Thanks in advance to anybody that reads this

Hi Fernandomfs,
If you are connected with POP3 account and using various devices to download emails from the server, then it can create such disturbance in accessing emails. After downloading emails from the server, it get deleted them from the email server.
To fix this issue, enable the function “Leave a copy of messages on the server” dialog box from the account settings option. By enabling it and defining time period, you can even access those emails from the other application like Phone, tablet
etc.
Take a more brief view:
http://www.msoutlook.info/question/160
Note: Improve community discussions by marking the answers helpful.
Thanks
Clark Kent

Exchange server not receiving emails from gmail

Hi dear.
From 2 days ago our exchange server 2013 not receiving email from gmail account. but we can send from our exchange or outlook to gmail account.
we can receiving email from yahoo, hotmail, aol or other mail server But, just gmail account we can not receive email. plz help us, how can i do.
Thanks

Hi Beigi,
According to your description, I understand that Exchange cannot received the message from Gmail, however others works well.
Great checklist from Hotaka.
Additional, I want to double confirm whether any other antivirus and protection software in your environment, also the
Anti-Spam
or
Transport rule settings, for example sensitive words, IP block list and attachment filter, so that the message from external trigger constraints and be rejected. Meanwhile, please double check in OWA.
Besides, please use message tracking log to get more details for this issue. It’s more helpful to narrow down the problem, for your reference:
http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx
Best Regards,
Allen Wang

Deploying Windows Server 2012 and Exchange Server 2013

Hi All,
Our Clinet is planning to implement Exchange Server 2013 as an email solution. There is no Active Directory Domain exists in the environment. So, we have planned to configure a Windows Server 2012 R2 Standard as a Domain Controller and Exchange
Server 2013 Standard would be installed on another Windows Server 2012 R2 Standard.
The setup would be for 250 users. Please guide me about the Cost of OS + Exchnage and CAL for 250 Users.
Warm Regards,
Prosenjit Sen
Thanks & Regards, Prosenjit Sen.

Another option would be to consider signing up for Office 365 instead of setting up the hardware and software for such a small number of users. It will take a long time for the cost of the hardware, maintenance, and support to be less costly than Office
365, if it would ever be less expensive. There is a lot of maintenance required for Exchange, so unless your client already has someone experienced in configuring and maintaining Exchange, there is a lot of expense in bringing someone up to speed to
perform those functions capably.
Just a suggestion. I do not work for Microsoft and I have no financial incentive to propose an Office 365 environment. I just know that if I were running my own business, I would have to be convinced that my business required its own internal
mail system when there are so many fully functional and capable mail systems available via subscription.
. : | : . : | : . tim

Error occurred at the 7 of 15 step of Microsoft Exchange Server 2013

Hi all to every techies ....
I'm a new to exchange server 2013 , I tried to install exchange server 2013 on windows server 2012 but couldn't get the success , It stops either 7 or 8 step of 15 , I tried to google it out but can not getting any progress , I tried to remove it , I deleted
by using ADSI Edit then I removed from the IIS then I delete the Microsoft folder from the Installed directory , and also I removed it from the registry editor as well , Thing thing is pulling my hair out my scalp , Any related help highly appreciated ,
The registry key (pickup / transport) doesn't exist in specified registry location , (i.e HKEYLM_SOFTWARE_MICROSOFT_EXCHANGESERVER
Thank you all
Neil Patric

Hi,
To understand more about the issue, I’d like to confirm the detail error when the installation failed.
As far as I know, deployment of an Exchange Server 2013 server goes through three main stages.
1. Preparing Active Directory (if you are installing Exchange Server 2013 for the first time)
2. Installing the Exchange Server 2013 pre-requisites on the server
3. Running Exchange Server 2013 setup
For more information, you can refer to the following article:
http://exchangeserverpro.com/how-to-install-exchange-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Angela Shi
TechNet Community Support

Exchange Server 2013 Mailbox - High CPU Usage

Hi,
We are having an issue with our Exchange 2013 Mailbox Server.
The process Microsoft.Exchange.Store.Worker consumes most of the CPU utilization.
Have anyone encountered this issue? How were you able to resolve it?
Thanks

Hi,
According to your description, your database is not active. And to understand more about the issue, I’d like to confirm if there is some user experience slow connection or other performance issue.
However, since in Exchange 2013 single Store Worker Process is only responsible for one database, we can firstly confirm if the specific mailbox database causes the high CPU:
http://msexchangeteam.in/how-to-identify-which-microsoft-exchange-store-worker-process-is-owned-by-mailbox-database-in-exchange-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Exchange server 2013 - cannot send / receive external emails - we can access owa -we can send/receive internal emails

Exchange server 2013 in Windows server 2012 VM
It was working fine then start the issue.
Firewall is managed externally and the last report said:
"I checked the firewall logs, which shows traffic being allowed through port 25 from 10.10.10.10 to 4.28.237.225: Log Number 116 Last Activity 2014-08-28 23:48:33 Status [accept] Src 10.10.10.10 Dst 4.28.237.225 Service SMTP Policy ID 1 Src Port 64081
Dst Port 25 While I showed one log, there were multiple log entries showing the same: traffic being accepted through port 25 from 10.10.10.10 to 4.28.237.225.
Can you verify that the mail server is set up so as to allow port 25? "
Today I was able to telnet the server from home: successfully
220 DTALL-EXCSRV002.DTC.dualtemp.com Microsoft ESMTP MAIL Service ready at Sat, 30 Aug 2014 16:31:16 -0400 ehlo 250-DTALL-EXCSRV002.DTC.dualtemp.com Hello [70.44.124.141] 250-SIZE 37748736 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-STARTTLS 250-X-ANONYMOUSTLS
250-AUTH NTLM 250-X-EXPS GSSAPI NTLM 250-8BITMIME 250-BINARYMIME 250-CHUNKING 250 XRDST
Also the receive - send connectors seems ok
Mx record point to Microsoft protection:
dualtemp-com.mail.protection.outlook.com.
Again, OWA is able to access and send/receive emails internal but never external even no bounceback just it never arrive.
Help me please. This is my first admin chaos...

Hi,
Is there any update with your issue?
If the CAS and Mailbox servers are collocated on the same server, the SMTP Receive connection for the Transport service will listen on 2525 instead of 25. If you install the CAS and Mailbox on the same server, please make sure that port 2525 is open.
For more information about Exchange 2013 mail flow, here is a blog for your reference.
Exchange 2013 Mail Flow Demystified…Hopefully
http://blogs.technet.com/b/rischwen/archive/2013/03/13/exchange-2013-mail-flow-demystified-hopefully.aspx
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Exchange Server 2013 not receiving emails

Similar Messages

Maybe you are looking for