Excise duty in J1is

hii all,
      i am new for CIN.  , but urgently need  help.
I am doing MB1B with movement number 941, there value for AED, CESS, SED is not flowing, i want that it shud flow automatically., but value of  BED, ECess, SECess is flowing.  i dont know abt PO, tax code etc.
i checked its delivery chalan from sales side , there all relevant value is flowing.
Edited by: Ms. nisha on Dec 21, 2010 11:17 AM
Edited by: Ms. nisha on Dec 21, 2010 11:18 AM

plz any one reply me regarding my issue,
i am trying to do j1is, there i have two scenario:
1) AED, BED , SECess value is coming, but i need of CESS value also, its not coming
2) in line 10 (in  item overview ) all values are coming, but in total which shows in bottom , no value is coming.
plz guide me, how i solve it
Edited by: Ms. nisha on Dec 22, 2010 7:15 AM

Similar Messages

  • I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS

    while doing STO. Our STO procedure is intiallyyPO with UB STO then MB1B with 351 movement type transfering stock from one plant to another plant. Next step is Tcode: J1IS here BED should pick automatically once i click on GET EXCISE INVOICE tab. then we go for JIVS and MIGO with 101 movement type.
    I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS .
    we are not going through SD configuration and I mentioned evrything in Tcode J1ID

    Chek SAP Note 951938 is applicable to you
    Regards
    Sanil Bhandari

  • No base value or Excise duty calculation coming at J1IS

    I am trying to create excise invoice by T code - J1IS with Ref. doc type - OTHR,
    but the system is not calculating the base value and excise duty
    Please help
    Regards,
    Pranav

    Hi,
    Please maintain the Assessable Value in J1ID for the material and also maintain the condition records for your excise conditions such as BED, ECS & SHECess in FV11 and try.
    Thanks & Regards,

  • J1IS in subcontracting with full payment of excise duty

    hi
    Can u tell me please
    In subcontracting with full payment of excise duty I have created PO,sent material to stock provided to vendor (541).while creating outgoing excise invoice with referance to material doc.(MATD)
    i am getting following error.
    GL account has not been assigned for MSUSP in customization
    Message no. 8I447
    Diagnosis
          GL account has not been assigned for the excise a/c in customization
    I am not getting where to assign G/L
    Reg
    Roc

    hi
    please check this customization setting
    Logistics - General --> Tax on Goods Movements --> India -->Account Determination
    Specify Excise Accounts per Excise Transaction &
    Specify G/L Accounts per Excise Transaction

  • Excise invoice through J1IS transaction

    Dear Friends,
    At Manufacturing location, 1 unit of material for each Batch is issued for lab sampling. This is done through QA11 transaction with movement type 331.
    In Excise configuration, rounding off is activated and for all outgoing invoices, BED/ E CESS/ SE CESS values get rounded off to nearest value.
    While creating excise invoice through J1IS, since the quantity of material for lab Sample is very less and the excise duty values being calculated are negligible...Ex - 0.48/ 0.32.- for these values system is converting then as Zero. This scenario is applicable for various materials and for each unit for lab sample there is a material document generated.
    Excise invoice is created with reference to each of the material document and the values are being nullified due to rounding off.
    If we change the config settings and deactivate rounding off, then this will also have impact on outgoing excise invoices created through J1IIN transaction.
    Is there any possobility that I can consolidate all the material documents and then rounding off logic is applied on final value?
    Regards,
    Praveen.

    Hi,
    Deactivate the rounding in config and create the routine for rounding the values and assign it against the excise conditions in the pricing procedure as a alt calc type.
    Regards
    Sunil

  • Excise duty in Subconrtacting with components from another plant

    Dear SAP Gurus,
    I have a typical scenario in subcontracting. I have a company code 0001 which has 2 plants 1000 & 2000.
    Plant 2000 creates subcontracting PO against vendor XYZ for FG with Excise duty.
    However plant 1000 issues the component  which is excisable Material.
    Just to summarise the component issued from plant 1000 is excisable & FG to be received from Sub contractor in Plant 2000 is also excisable.
    Kindly guide.
    Regards

    Hi
    For plant 100
    1) Create a sub PO
    2) Issue the material th MB1B 541
    3) Create a excise invoice in J1IS reference document is step 2 doc.No need to create a Subcontracting challan as the excise Invoice would serve as a Legal document
    Account entries will be
    ED Suspense Dr
    ED Payable Cr
    ETT OTHR will be called
    4) Recieve the material in MIGO
    5) MIRO for processing charges only
    For plant 2000
    1) Create a sub PO with Excise duty
    2) Issue the material th MB1B 541 create a subcontracting challan in J1IF01 -No excise duty
    3) GR and J1IEX -For capturing and posting Excise duty
    Acc Entry
    ED Recievable Dr
    ED Clearing Cr
    4) MIRO for processing charged and Excise duties
    Regards
    Sandeep

  • Double effect of excise duty

    Dear Experts,
                 I need some  suggestion from you relating to EXCISE.
    While making Excise Invoice of any rejection, excise duty on the same gets booked in G/L immediately after making Excise Invoice thru J1IS but the same doesnu2019t get updated in RG23A Part II register.
    At the end of the month when the unpaid duty is calculated, system shows duty on Sales as well as Purchase return and both the amount is paid by excise.
    Since duty on purchase return is already debited in G/L while making of purchase return invoice, this amount is again debited in G/L at the time of payment made by Excise department at the end of month.
    Therefore, one (duplicate entry) has to reverse in G/L thru JV. Here duty should not be paid at the time of making purchase return Invoice only liability should be created in the system. Duty will only be debited at the end of month or whenever excise department is making payment for the same.
         Please suggest.

    Dear Ajit
    Let us assume your pricing condition type is PR00 and excise condition type is JMOD.
    Create one more pricing condition say ZR00 in V/06 and assign in your pricing procedure in such a way that the "From-To" step number against ZR00 should be of PR00 and JMOD
    thanks
    G. Lakshmipathi

  • How to re-capture excise duty which is issue aginst subcontract PO

    Hi,
      I have made a Subcontract PO with item category as L, with full payment of excise duty  in subcontract there are two BOM component,  then i have done  MB1B  ref. to MB1B document number excise invoice created with J1IS  for the raw materials which we have supplied,  as in case of subcontract with full payment of excise duty  there is no need to create subcontract challn now I have made the GR for finish product,   now how to capture the excise duty back when I ma trying to J1IEX capture excise  inovice ref. to GR  or PO  it is showing me only finish material in the J1IEX not the RM,  as the excise duty is on the RM only not on Finish product  in vendor PO tax is as labour chagres only.
    regards,
    zafar

    Hi
    I wan to put some basic things here
    1) when you send material to vendor with excise duty ,then vendor will take credit of that material ( your child material)
    2) After processing your child material vendor will send final material only not child material
    so how you will capture incoming excise for component which already consume by vendor?
    second thing if you received excise invoice from your vendor for final product then check that invoice you will get only Final material name and qty, there not child material with excise if am not wrong
    Regards
    kailas Ugale

  • Excise treatment during subcontracting process with excise duty

    Dear all,
    Iam aware of the subcontracting process STEPS, but my query is while dealing with Excise in Subcontracting process, will the Excise duties captured in J1IS(create outgoing excise invoice) be RECONCILED with excise duties captured in J1IEX(subcontractor's excise invoice). As per my scenario both the duties are different unlike reconciliation process in the process without excise duty. My questions are
    1.Do both excise duties during j1is and j1iex should be same or can it be different (since in  j1is we capture Duties on raw material's assesable value where as in j1iex we capture duties semi finished goods given by sub contractor.)
    2.Kindly eloborate treatment of  excise duties captured in these steps.
    Revert if you didnt understand this scenarion.
    Regards,
    Sravanthi.Y

    Hi,
    57fc challan will be issued when we send raw materials to subcontractors WITHOUT EXISE DUTY.Hence not relevant in my case. But my case is WITH excise duty.we send subcontractor the excise invoice by using j1is. later he will process these raw materials and will give back the semi finished goods along with excise invoice(which we will capture n post using j1iex). so my question will excise duties differ in j1is(excise invoice TO subcontractor) and in j1iex(excise duty FROM subcontractor)?

  • Return to vendor with excise duty..?

    Hi all
    can anybody explain me how to do return delivery to vendor with excise return,  after invoice verification.
    Pls explain me step by step with example (excise duty example ).
    firt ve have captured and posted excise duty frm vendor ,
    1. then i have created return PO with same tax code with excise duties 1421% + 4% vat. tax valus r flowing properly in return PO (1421%+4%vat).
    2.while doing MIGO (wht is mvt type )and wht to do in excise tab.
    3...wht is process
    Thanks
    sap-mm

    Dear,
    After done Return delivery
    J1IS u2013 Excise Invoice Other Movements
    Here click on u201Ccreateu201D button to create an outgoing excise invoice and reverse the CENVAT Amount.
    Here put all details as below and Press u201CEnteru201D.
    Ref.doc.type - MATD, Doc Number - Material document No of 161 mvmt, Doc Year, Series Group, Excise Group and Vendor
    Here check BED, ECS and SECess values to be reversed and click on u201CSaveu201D button to post the excise invoice.
    J1IV - Post and Print Outgoing Excise Invoice.
    Regards,
    Mahesh Wagh

  • Sub-contracting with excise duty..?

    Hi all
    can anybody explain me the sub-contracting process with excise duty , here we are going create excise invoice(J1IS instead of sub-contract challan) and what abt material document for sending out materials
    whether v an use excise invoice as material transfer document to jobber place or what.
    Please explain me with example ..
    Regards
    sap-mm

    hi ,
    you can try:
    1.Do the MB1A with 202 mvt type to get back the material from the Work location Cost center to Storage location.
    2.Create the Subcontracting PO without payment of excise duty ie., with subcontracting challan. Here the components provided to the vendor & material at item overview should be the same.
    3.Do the MB1B - 541 Mvt type transfer posting.
    4.Create the subcontracting challan w r t material doc by J1IF01
    5.Do the MIGO for SC PO.
    6.Reconcile the SC Challan.
    7.If the qty is fully reconciled then you can complete the challan.
    8.Do the LIV for SC PO.
    9.Do the MB1A with 201 MVT type to issue the material to the Work location.

  • Subcontracting process with excise duty??

    hi all
    Can anybody explain me about the subcontracting  scenario with excise duty??
    For example , i have cerated subcontracting PO for A material is finished material is exciseable.
    To produce A material , i have provided ,B,C,D materials to subcontractor , those materials also exciseable .
    this is my scenario , explain me with transaction code (Step by Step).
    Explain me about excise duty accounting folw for above scenario.??
    Thanks
    SAP-MM

    Hi,
    During J1IS: -
    CENVAT Payable BED - Cr
    CENVAT Payable ECS - Cr
    CENVAT Payable SECess - Cr
    Excise Duty Paid - Dr
    During J1IEX: -
    CENVAT Input BED - Dr
    CENVAT Input ECS - Dr
    CENVAT Input SECess - Dr
    CENVAT Clearing - Cr

  • Subcontracting with excise duty ??

    Hi experts
    Can anybody explain me , how subcontracting procees haes been done with excsie duty ?
    In short somebody can explain me  here only , with any link.
    I should know , how the excise invoice has being created and how capture and post the same will be happened ??
    While sending the material for job work. the excise duty value 'll be less .
    While receving as finished goods from subcontractor excise value will be more , so hopw this will happen in real time .....???????
    Thanks
    SAP-MM

    Hi.
    Your scenario comes under u201CSubcontracting Under Full Payment of Dutyu201D .
    The basic requirement is that in your pricing you should have manual condition (JEXC) for entering the excise duty of the finished goods which you are getting from the subcontractor.  
    Rest of the thing is normalu2026
    1.First create a sub cont PO as usual. But under conditions you should enter the Excise duty liable on that finished goods 
        against the condition JEXC.  Later you maintain the BOM.
    2. Do the transfer posting of the child components.
    3. Based on this transfer posting document create a out going excise invoice at J1IS. Here what ever the excise duties comes
        will be the excise duties of child components.
    4. After this physical send the child components along with the excise invoice.
    5. Later the subcontractor process those child components and send you the finished goods along with his excise invoice.
        This excise invoice will contains the excise duty applicable on the finished material. Anyway you have maintained this at the 
        time of PO creation against JEXC condition. If you found any difference in the excise value what you maintained in PO and
        that form the subcontractor excise invoice, then amend the PO to the correct value.
    6. After that first before GR only capture (not Post) the excise invoice with reference to PO.
    7. After that DO the GRu2026
    8. After that Post the excise invoice.
    9. Finally do the payment by MIRO to the subcontracting vendoru2026
    Hope this will clarify your doubt.

  • Subcontract with full payment of excise duty

    hi gurus
    Can any one provide me itutor link of subcontract with full payment of excise duty,import cycle,import under custom bonded ware house
    Thanks in advance
    Roc

    hi
    This is a subcontracting under full payment of duty scenario.
    Refer this link
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
    Subcontracting Under Full Payment of Duty
    Purpose
    This procedure illustrates how you use the system to send materials to your subcontractors for processing using normal excise invoices.
    Prerequisites
    You have created a condition type for manually entering excise duty in the subcontract order. In the standard system, you can use condition type JEXC, maintain in pricing procedure.
    Process Flow...
    1. Create a
    tract order for the subcontractoru2019s services.Enter excise manually in the condition type JEXC & take a tax code for VAT calculation.
    2. Do the transfer posting for the materials that you want to send to the subcontractor.
    3. Create an outgoing excise invoice for the materials by J1IS & J1IV.
    4. You send the materials to the subcontractor, together with the excise invoice.
    5. The subcontractor processes the materials and returns them to you, together with another excise invoice.
    6. Captures the subcontractoru2019s excise invoice, using the purchase order as the reference document.
    7. Do the goods receipt & refer excise invoice in excsie tab.
    8. Posts excise invoice.
    9. The accounts payable clerk posts the subcontractoru2019s invoice.
    for imports
    Import scenario
    To map Import procedure into SAP , follow the following steps :
    1.Create material master of import goods.
    2.Create vendor master record of import vendor and Customs clearing vendor.
    3.Maintain CIN settings.
    4.Maintain J1id.
    5.Maintain Pricing procedure SAP standard JIMPOR..,maintain required conditions..JCDB,JCV1...
    6.Assign the schema to respective import vendor in Purchasing view of VMR.
    7.Create import PO ,check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned..This can be done by In condition tab select condtion then click on display,then enter.
    Save the PO.
    8.MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
    9.Capture Excisse invoice--j1iex.
    10.MIGO.
    12.Post Excise Invoice.
    13.MIRO...Payment to vendor(import vendor)
    http://help.sap.com/erp2005_ehp_01/helpdata/en/95/3ca40a110511d4b5ae006094b9ec21/frameset.htm
    regards
    kunal
    award if helpful

  • Job Work with Payment of Excise Duty

    Dear Gurus,
    We have done full process of job work without payment of excise duty. but we also want job work with payment of excise duty. we didn't found any way to do this job.
    When we make subcontracting entry with 541 mvt type and then make its excise challan  with J1IF01, the all field related to excise value is disable thats why we can not put the value in it.
    Please suggest something.
    Regards
    Pawan Sarda

    Hi
    As per my knowledge,If you are sending your material with full excise value to your subcontracting vendor means its one type of saleing
    Here you are sending material material with excise duty means its sure you dont get back your material in 180 days ,so while doing finsihed material your vendor will send finsihded material along excise value and you will capture tha excise value
    I think In this scenario subcontracting Challan  don't come in Picture  
    steps are follows
    subcontracting under Full Payment of Duty
    Creation of Subcontracting PO (ME21N)
    Transfer Posting of Components to Subcontractor (MB1B/ME2O/MIGO)
    Creation of Outgoing Excise Invoice w.r.t. Transfer Posting Document (J1IS) - Used to send the components to Subcontractor's. Here 57F4 Challan is not created.
    Capture Vendor Excise Invoice at the time of GR of Finished Goods w.r.t. Subcontracting PO (MIGO)
    Post Excise Invoice for FG received from Subcontractor (J1IEX)
    Regards
    Kailas Ugale

Maybe you are looking for