Excise Duty Payment Process in CIN

Hi Experts
Can any body help me to know process for payment of Excise duty in CIN.
Regards
Vijay Puri

Hi
For details about excise please go through the below link.
http://help.sap.com/saphelp_47x200/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Regards
MBS

Similar Messages

Excise duty payment

Hello Experts
How Can we manage payment/Setting off Excise duty in SAP 8.8?
regards
Manoj

Hi Manoj........
If you know about Tax Payment Wizard. This helps to pay the taxes as per liability.
There is no need to raise extra manual JV what all you need to do is within date range you have to run the Tax Payment Wizard which will give you the difference of Excise duty whether to pay or receive from tax authority. Its effect also goes directly to Excise Register......
Try once.......
Regards,
Rahul

Monthly Excise Duty Debit process

Can anybody explain the process to debit monthly excise duty from PLA and RG23A part II/RG23C part II.
As per my knowledge process is that :
Select J1IH - other adjustment- pop up comes and put data as per pop up- select RG23A/C/PLA any one at the time one then enter go to next page then select header and put duty amount at BED enter - select G/L account and save - excise JV created and account no generated with sr no.
Similarly follow same procedrue for debiting from PLA.
is it correct procedure or any other process in the system ?
please help me. This is most urgent.

First you will have to update all your registers i.e RG1,RG23A& RG23C part I. using transaction J1I5,
Then use the J2I5 extract registers to update the value in RG23A & RG23C part II
J2IUN transaction for monthly utilization.
U will see excise payable against which you will see bakances in different registers you can select the register from which you have to utilize the exice duty.
I think you can now utilize the credit taken.
Reward If useful.
Regards

Excise Duty Rate Chnge -No CIN

Hello
Changes in budget rate for excise.PO with old rate
already entered.No CIN.Need to write a validationor
(how can i do it) that On MIRO,if tax rate(which has
been manually enterd in PO) is 16%,should change to
14%(shud i create a new Tax code for the same)
Please help.WOuld be highly appreciated.

Dear Friend
For Budget changes you just maintened excise rate is J1ID for each material.
you have maintane 16% upto 29-2-08 and from 01-03-08 to 31-03-9999 you have to maintned 14%.
so at the time of doing miro depend upon posting dtae syatem will propose excise .
Hope this will hgelp you
Jain
Assign Points

REVERESE SUBCONTRACTING WITH EXCISE DUTY

Job Work done by Client with excise duty
Business Process,
                             Raw material got from the Customer & it is processed by Client finished goods are made the same will be delivered to the Customer with excise duty.
Details:
1     Sales order will be created with the details of raw materials that customer agreed to give & finished product that customer need after getting the P.O from the customer.
2     Customer will send the material with excise invoice (paid by customer).
3     Client receives the material post the customer excise invoice with part-1 & part-2 entry in the RG23A register.i.e Cenvat credit taken by Client for the customer material.
4     The received Raw material processed by Client converted to finished product with RG1 entry.
5     Finished send to the customer with excise duty paid by Client
6     As excise duty liability is with Client every month excise duty difference between credit taken & paid is settled with customer.
E.g. For August month
          Cenvat credit taken for raw materials Rs-10000
          Excise duty paid by the Client Rs-50000
          Difference to be paid by the customer to Client is Rs-40000
Pl guide me how to map this process in cin
Regards
Umapathy.M

Hai,
The pre requisties for this scenario in CIN part is
1. Create the input raw material with UNBW material type.
2. Create the customer as a vendor.
3. Maintain the input material in J1ID with material type raw material & chapter ID.
4. Maintain the excise details for this vendor with excise indicator.
5.Maintain the assessable value for this material in J1ID. This has to be flow for excise calculation.
6.Maintain the excise tax rates for the Chapter id in J1ID.
7.Mainain the 501 Mvt type in IMG - Logistics general - Tax on goods & movements - India - Business transactions - Incoming excise invoices - specify which mvt type involves excise invoices.
8.Maintain the settings for register entries & GL accts in Acct determination in IMG - Logistics general - Tax on goods & movements - India - Acct determination for the excise transaction type EWPO.
The steps involves are
1.Create a sale order with excise tax code conditions for the processed fininshed product.
2.Do the MIGO with other receipt for 501 Mvt type to receive the raw material. Capture the excise invoice in the MIGO itself.
3.Post the excise invoice by J1IEX.
4.Do the process with PP cycle.
5.Send the finished product with SD route.
6.Do the Billing & outgoing excise invoice.
7.The SD Pricing procedure has to be configured as per the requirement.
8.Check the accting entries at the Customer acct.

REVERSE SUBCONTRACTIN WITH EXCISE DUTY

Job Work done by Client with excise duty
Business Process,
                             Raw material got from the Customer & it is processed by Client finished goods are made the same will be delivered to the Customer with excise duty.
Details:
1     Sales order will be created with the details of raw materials that customer agreed to give & finished product that customer need after getting the P.O from the customer.
2     Customer will send the material with excise invoice (paid by customer).
3     Client receives the material post the customer excise invoice with part-1 & part-2 entry in the RG23A register.i.e Cenvat credit taken by Client for the customer material.
4     The received Raw material processed by Client converted to finished product with RG1 entry.
5     Finished send to the customer with excise duty paid by Client
6     As excise duty liability is with Client every month excise duty difference between credit taken & paid is settled with customer.
E.g. For August month
          Cenvat credit taken for raw materials Rs-10000
          Excise duty paid by the Client Rs-50000
          Difference to be paid by the customer to Client is Rs-40000
How to map this process in CIN
Regards
UMAPATHY.M

,

Y Excise duty ..?

hi all
For what kind of material we have to capture, post and utilize the excise duty in manufacturing plant.
Because , we are procuring the more spare parts for our plant.
But for that spare parts also excise duty we are paying to vendor .
How to utilize ..
Please explain me the process..
thanks
sap-mm

hi,
This component enables you to analyze tax-relevant movements of goods that are subject to excise duties. It calculates the amount of the excise duty payments and, upon request, prints the results on forms for submission to the appropriate authorities.
Excise duties are duties that the state imposes as taxes on the use or consumption of certain goods. The liability to pay taxes is incurred when taxable goods are moved under customs seal from a location to a taxable location.
The state imposes excise duties, for example, on petroleum products, tobacco, alcohol and alcoholic beverages.
Now as per your requirement, for the SPARE PARTS:
This component:
·        Is used in XX countries, but can also be used in countries outside the XX.
·        Is geared (in the standard system delivery) to meet the requirements of the XX industry
·        Can be adapted to map excise duties in other (Automobile etc) industries.
Hope it satisfies you...
You can also check the Sap note 716971
Hope it helps..
Regards
Priyanka.P

Sample invoice with excise duty only

Hello Experts,
User is sending free samples to customers. Presently, normal sales invoice is raised and credit note is issued in SAP. We need a separate Sample Invoice with zero value but with Excise
Duty Payment.
How to achieve this requirement? suggestions?
Regards,
Raj

Dear Raj
Check these threads for making sample sales
[Sample sales |Sample sales]
[Sample sales scenario configuretion |Re: Sample sales scenario configuretion]
thanks
G. Lakshmipathi

Subcontract with full payment of excise duty

hi gurus
Can any one provide me itutor link of subcontract with full payment of excise duty,import cycle,import under custom bonded ware house
Thanks in advance
Roc

hi
This is a subcontracting under full payment of duty scenario.
Refer this link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Subcontracting Under Full Payment of Duty
Purpose
This procedure illustrates how you use the system to send materials to your subcontractors for processing using normal excise invoices.
Prerequisites
You have created a condition type for manually entering excise duty in the subcontract order. In the standard system, you can use condition type JEXC, maintain in pricing procedure.
Process Flow...
1. Create a
tract order for the subcontractoru2019s services.Enter excise manually in the condition type JEXC & take a tax code for VAT calculation.
2. Do the transfer posting for the materials that you want to send to the subcontractor.
3. Create an outgoing excise invoice for the materials by J1IS & J1IV.
4. You send the materials to the subcontractor, together with the excise invoice.
5. The subcontractor processes the materials and returns them to you, together with another excise invoice.
6. Captures the subcontractoru2019s excise invoice, using the purchase order as the reference document.
7. Do the goods receipt & refer excise invoice in excsie tab.
8. Posts excise invoice.
9. The accounts payable clerk posts the subcontractoru2019s invoice.
for imports
Import scenario
To map Import procedure into SAP , follow the following steps :
1.Create material master of import goods.
2.Create vendor master record of import vendor and Customs clearing vendor.
3.Maintain CIN settings.
4.Maintain J1id.
5.Maintain Pricing procedure SAP standard JIMPOR..,maintain required conditions..JCDB,JCV1...
6.Assign the schema to respective import vendor in Purchasing view of VMR.
7.Create import PO ,check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned..This can be done by In condition tab select condtion then click on display,then enter.
Save the PO.
8.MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
9.Capture Excisse invoice--j1iex.
10.MIGO.
12.Post Excise Invoice.
13.MIRO...Payment to vendor(import vendor)
http://help.sap.com/erp2005_ehp_01/helpdata/en/95/3ca40a110511d4b5ae006094b9ec21/frameset.htm
regards
kunal
award if helpful

Process flow of excise duty from procurement to sales accounting entry with amount.

Dear Expert ,
Kindly any one help the process flow of excise duty calculation from procurement to sales accounting entry with amount. for example.- if material amount is Rs. 10,0000 and excise duty is 8% , edu ecss 2 % , and sec ecss 1%. I want know the accounting entry on- MIGO, J1IEX, MIRO, F-43 AND , PGI, BILLING DOCUMENT, J1IJ , TR6 CHALLAN, J2IUN.
Regards
Akshaya

Hi,
In case of
A. Procurement : there are two types of procurement viz. Local and Import
LOCAL
1. MIGO
Inventory A/c Dr
To GR?IR
2. J1IEX
CENVAT Receivable (Basic) A/c - Dr
CENVATReceivable (Ecess) A/c - Dr
CENVAT Receivable (S & H) A/c - Dr
To CENVAT Clearing
3. MIRO
CENVAT Clearing A/c - Dr
To Vendor A/chrough
4. F-43
No excise entry through SAP direct posting but through manual posting in case using TAXINN procedure.
5. TR6 Challan
PLA Payment (Basic) A/c - Dr
PLA Payment (Ecess) A/c - Dr
PLA Payment (S & H) A/c - Dr
To PLA on Hold A/c
IMPORT
1. MIRO
ECS+SECS on Cus+CVD A/c Dr (consists of ECS on custm+cvd and S & H on custm+cvd)
CVD Clearing A/c Dr (consists of Additional Duty CVD and CVD)
Customs Clearing A/c Dr (consists of Basic Customs)
To Customs Vendor
2. MIGO
Inventory A/c - Dr
To GR/IR A/c
To Customs Clearing (consists of Basic Customs)
To ECS+SECS on Cus+CVD (consists of ECS on custm+cvd and S & H on custm+cvd)
3. J1IEX
CENVAT Receivable (Basic) A/c - Dr
CENVATReceivable (Ecess) A/c - Dr
CENVAT Receivable (S & H) A/c - Dr
To CVD Clearing
4. F-43
No excise entry through SAP direct posting but through manual posting in case using TAXINN procedure.
5. TR6 Challan
PLA Payment (Basic) A/c - Dr
PLA Payment (Ecess) A/c - Dr
PLA Payment (S & H) A/c - Dr
To PLA on Hold A/c
Sales
1. PGI
COGS A/c Dr
To Inventory
2. Billing Document
Excise
ED Suspense A/c Dr
To Liability for BED
To Liability for ECS
To Liability for S & H
Customer
Customer A/c Dr
To ED Suspense A/c
To Revenue
To VAT / CST
Hope your doubts are clear.
Regards,
Tejas

End to End Excise duty process ..?

Hi all
Can anybody explain me the step to be carried out after below steps in excise duty proces (CIN process ).
1.Created PO with Excisable material,-ME21N
2.GR done for excise material PO -MIGO
3.Capture and post Excise invoice -J1IEX
4.Now i have checked in J2I9, its showing opening balance-X amount and closing balance as X amount. Credit availed for this month is Y amount.
How to proceed further to complete end to end excise transaction .
5.How to utilise the amount....?
6.How to pay the duty payable to CENVAT office .
Explain step byt step to complete entire Excise duty scenarion (CIN scenario).
Thanks
Sap-mm

Duplicate Post of: /thread/1550764 [original link is broken]

Subcontracting with full payment of excise duty

Hello friends,
Can u plz give the complete configuration details for setting up Subcontracting with full payment of excise duty, Cenvat, Edcess.
Purushotham

Hi,
Process Flow for Sub contracting with Excise duty
1)The purchasing clerk creates a subcontract order for the subcontractors srvices.
2)The warehouseman creates a transfer posting for the materials that you want to send to the subcontractor.
3)The excise clerk creates an outgoing excise invoice for the materials.
4)You send the materials to the subcontractor, together with the excise invoice.
5)The subcontractor processes the materials and returns them to you, together with another excise invoice.
6)The excise clerk captures the subcontractors excise invoice, using the purchase order as the reference document.
7)The warehouseman enters the goods receipt.
8)The excise supervisor posts excise invoice.
The accounts payable clerk posts the subcontractors invoice.
For this one only u require Account dtermination for ETT for OTHER in Logistic general-Tax on goods movement-India-Account determianation.
Raghu

Job Work with Payment of Excise Duty

Dear Gurus,
We have done full process of job work without payment of excise duty. but we also want job work with payment of excise duty. we didn't found any way to do this job.
When we make subcontracting entry with 541 mvt type and then make its excise challan with J1IF01, the all field related to excise value is disable thats why we can not put the value in it.
Please suggest something.
Regards
Pawan Sarda

Hi
As per my knowledge,If you are sending your material with full excise value to your subcontracting vendor means its one type of saleing
Here you are sending material material with excise duty means its sure you dont get back your material in 180 days ,so while doing finsihed material your vendor will send finsihded material along excise value and you will capture tha excise value
I think In this scenario subcontracting Challan don't come in Picture
steps are follows
subcontracting under Full Payment of Duty
Creation of Subcontracting PO (ME21N)
Transfer Posting of Components to Subcontractor (MB1B/ME2O/MIGO)
Creation of Outgoing Excise Invoice w.r.t. Transfer Posting Document (J1IS) - Used to send the components to Subcontractor's. Here 57F4 Challan is not created.
Capture Vendor Excise Invoice at the time of GR of Finished Goods w.r.t. Subcontracting PO (MIGO)
Post Excise Invoice for FG received from Subcontractor (J1IEX)
Regards
Kailas Ugale

Cin excise duty entry

hi,
need the advice. please help.
1) for manufacturing, when purchase, the input tax will debit cenvat account, say 100inr. when sales, output tax will credit cenvat account, say (120)inr.
may i know if 100inr is excise duty paid and 20inr (120-100) is excise duty payable?
2) so actually the total duty paid is 100 + 20 = 120inr, correct?
3) may i know what is the difference for excise duty paid / excise duty payable and cenvat receivable account?
3) may i know how is the double entry for point 1 from purchase to sales until RG and pla?
thanks

Hi,
Pl. go through the following carefully. If u see the config. of CIN the column names Excise Account Assignment Table are like RG23A BED etc., Hence the account description(user's discretion) can be CENVAT Account or RG23A account.
Apart from this there are entries in RG23 registers which are Statutory requirement.
Pl. do not get confused with Account and Register. Account will have only the amounts where as registers will contain no. of particulars.
Check the accounting entries for the whole process
What should be my accounting entry in procurement?
For Domestic Procurement of Raw Material
 During GR
 Material Stock Dr.
 GR/IR clearing Cr.
 During Excise Invoice Credit
 Cenvat Account OR RG 23A Dr.
 Cenvat Clearing Cr.
 During Invoice Verification
 Cenvat Clearing Dr.
 GR/IR Clearing Dr.
 Vendor Payable Cr.
For Domestic procurement of Capital Goods
 During GR
 Material Stock Dr.
 GR/IR clearing Cr.
 During Excise Invoice Credit
 Cenvat Account/ RG 23C A/c (CVD) A/c Dr. (50%)
 Cenvat On-hold/ RG 23C A/c (CVD) A/c Dr. (50%)
 Cenvat Clearing Cr.
 During Invoice Verification
 Cenvat Clearing Dr.
 GR/IR Clearing Dr.
 Vendor Payable Cr
Subsequent of Capital Goods
 Cenvat Account/ RG 23C A/c (CVD) A/c Dr. (50%)
 Cenvat On-hold/ RG 23C A/c (CVD) A/c Cr. (50%)
For Excise Duty Credit of Raw Material without PO
 Cenvat Account OR RG 23A Dr.
 Cenvat Clearing Cr.
For Excise Duty Reversal through Excise JV
 Cenvat Clearing Dr. Cenvat Account OR RG 23A Cr.
What should be my accounting entry when the goods are issued through MM and excise invoice is created (J1IS & J1IV)?
During Excise Invoice Creation
 Cenvat Suspense Account Dr.
 Cenvat payable Cr.
Note: Cenvat Suspense Account should be cleared apprpiately using FI JVs.
For TR6C Challan
PLA Account Dr.
PLA on hold Account Cr.
During Fortnightly Utilization
Cenvat payable Dr.
Cenvat Account/ RG23A/RG23C Cr.
PLA Account Cr.
Thanks,
Vijay

REVERSE SUBCONTRACTING PROCESS WITHOUT EXCISE DUTY

Business Process,
                             Raw material got from the Customer & it is processed by Client,finished goods are made the same will be delivered to the Customer without excise duty.
Details:
1.     Sales order will be created with the details of raw materials that customer agreed to give & finished product that customer need after getting the P.O from the customer.
2.     Customer will send the material with annexure -2 with first part updated.
3.     When the client receives the material in the Annexure -5 register first portions qty is updated.
4.     Raw material issued to production, the issued qty updated in Annexture-5 register is updated in the second portion.
5.     Finished product received by stores from production the received qty updated in Annexture-5 register in the second portion.
6.     The received Raw material processed by client converted to finished product partly. Part of the finished product is issued to the customer against the sale order with annexture-6 with Annexure -5 register second portion update.
7.     All the remaining raw materials converted to finished product & it is the last consignment issued to the customer against the sale order with annexture-2 part-2 updated. And the issued qty is updated in the Annexture-5 register second portion updated.
8.     In this process all the movements of the material is updated in the Annexture-5 register.
Pl giude to maintain the above process ican be mapped in cin
Regards
UMAPATHY.M

This can be mapped in SAP but there is no standard Tcode to do this. You have to develop Z Transaction code with the help of ABAPer.

Excise Duty Payment Process in CIN

Similar Messages

Maybe you are looking for