Excise Field sequence change required_MIGO screen

Dear All,
While posting Goods Receipts (GR) against a PO having excise component through MIGO, there is a 'Excise item' tab in detail data where we have to put all the required excise components.
Sequence of the excise components are:
Base Value
BED
AED
NCCD
SED
ECS
SECess
but as per the business requirement we need to change the field sequense as :
Base value
BED
ECS
SECess
AED
NCCD
SED
so where i have to change this field sequence, is there any configuration setting?
Because in MIGO field selection i am not able to find these fields.
Is it related to CIN and do i need to change the field sequence there only ?
Thanks
Shubham

Hi
The flow for calculation can be controlled through the TAX Procedure.
Normally calculation flows is matters.
regards
Prasanna

Similar Messages

Field sequence Change in Sales order after adding new field( Resolved)

Hi I have added a new filed into sales order/item overview.(addded thr se51-layout ) . but when i go to va01/02/03, i noticed that the field sequence is changed due to my new field.(but when i see the layout its differnt and correct.)( even i checked changing the groups also)
Is there something i need to do..?Please advise. Thanks a lot.
<b>Answer:</b>
Table view is configurable in VA01/02/03.( No matter where you add the new fields)
Users can always move them to desired position.
Message was edited by: Deadlock1
Message was edited by: Deadlock1
Message was edited by: Deadlock1

Hi
In the comments for the subroutine, it says:
*       Parameter new_pricing controls the new pricing in the calling *
*       form. It can be filled according the the allowed values       *
*       of domain KNPRS (Pricing type), for example:                  *
*       ' ' = no new pricing                                          *
*       B   = Carry out new pricing                                   *
*       C   = Copy manual pricing elements and redetermine the others
So, you must write:
If VBAP_WERKS NE *VBAP_WERKS.
new_pricing = 'B'.
Endif.
Regards
Eduardo
Edited by: E_Hinojosa on Aug 25, 2011 8:21 AM

Adding Custom Fields for Change Request in EHS

Hi,
I need to add custom fields in Change request screen, where I am not able to identify for BO and node to do same.
Its Configuration name /MOC/F_ISS_ROOT_OBJECT_INFO.
I tried with /IAM/ISSUE and /IAM/ACTIVITY BO.. but it is not working.
Not able to identify the correct table for adding fields.Pls help me on the same.
Regards,
Reny Richard

Reny,
Why don't you check for the ST05, so that you can grasp some of the table names. Should be useful to you
http://scn.sap.com/community/abap/testing-and-troubleshooting/blog/2007/09/05/the-sql-trace-st05-quick-and-easy
BR,
RAM.

How to change the field sequence in Customer master record.

Dear Friends,
We are required to chage the sequence of customer master record fields that are available under different tabs of 'General Data', 'Company Code Data' and Sales Area Data.
Our client requirement is to place all mandatory fields in the first screen of customer master record. Here the intention is to save the user time instead going and clicking multiple tabs/screens to fill information on only one or two tabs. Please suggest us the availabe solution in SAP for this requirement.
Thank you
Raghu Ram.

Hi
Step 1: Take help of a FI guy and:
The fields can be suppressed by configuring through Financial accounting > Business Partners > Customers > Account groups.
Step2 : The challenge inyou project is to have a single tab with the allowed fields
A technical guy can only help you out on this . Again This would be a huge effort since first you need to change the code for customer master. As customer master is a source of data for various documents in SD , at each place you will have to do changes in th code...I don't think it is feasible.
Instead of doing this , create an external interface for transferring the value to SAP through BAPI. this would involve integration and may be as per defined SAP standards you can use CSV files or XML files for the integration process.
This would be a better option than fiddling with SAP system
Regards
Nikhil

Book for Screen Sequence Change BP

Hi,
We are trying to change the screen sequence for BP. Our requirement is to make available an already exsisting field on to another tab page of BP. Is this possible? Is there a cookbook or some documentation we can refer to in order to change the seceen sequences.
Currently we are exploring it thru BUPT
All help is welcome
Sulakshana

Hi ,
You cannot move individual field you can only move a view ... so all the fields in that view including the one you want will move to the new tab page.
Thanks and Regard,s
SUmeet

How to capture the user change in an input field on a selection screen?

I am coding a selection screen in which there are two input fields. The first field takes a Unix directory from the user input. Based on the input value, the second field will be populated with a the name of a file under the corresponding directory.
My question is how I can make the program capture the user input without having to make the user press ENTER after they enter the value in the first field?
Any help will be greatly appreciated.

Venkat,
Actually you led me to the real solution! It's the function module DYNP_VALUES_READ that does the trick for me. This function enables the program to capture dynamic user changes without recourse to PAI. Please refer to the code below:
REPORT   zreiabsintf MESSAGE-ID zreiabsintfmc.
*<HGDC------------------------------------------------------------------
* Selection screen for the conversion program
*HGDC>------------------------------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-001.
PARAMETERS: p_indir   LIKE epsf-epsdirnam OBLIGATORY,                   " Inbound file directory
            p_infile LIKE epsf-epsfilnam DEFAULT gc_infile OBLIGATORY, " Inbound file name
SELECTION-SCREEN END OF BLOCK input.
*<HGDC------------------------------------------------------------------
*   Displays a file-open dialog when the user clicks the search
*   help button next to the inbound file text field. The user
*   can select the inbound file visually.
*HGDC>------------------------------------------------------------------
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_infile.
* Capture any user change to the directory.
PERFORM check_dir_change.
* Display the file open dialog
PERFORM file_open_dialog CHANGING p_infile.
*<HGDC------------------------------------------------------------------
* Global constants
*HGDC>------------------------------------------------------------------
CONSTANTS:
    gc_indir LIKE epsf-epsdirnam
              VALUE '/interfaces/<SID>/inbound/',      " Default inbound directory template
    gc_infile LIKE epsf-epsfilnam VALUE 'input'.       " Default inbound file name
*<HGDC------------------------------------------------------------------
* Global data
*HGDC>------------------------------------------------------------------
DATA:
    gs_dynpfields   TYPE dynpread,                        " Fields of the current screen
     gt_dynpfields   LIKE STANDARD TABLE OF gs_dynpfields. " Table of the screen fields
*&      Form file_open_dialog
*       Opens a dialog window for the user to choose a file in
*       the specified Unix directory.
*      <--P_FILE is the file to be selected.
FORM file_open_dialog CHANGING p_file.
* Validate the directory.
OPEN DATASET p_indir FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
    MESSAGE i001(zreiabsintfmc) WITH p_indir.    " Unable to open the given directory
    EXIT.
ENDIF.
CLOSE DATASET p_indir.
* Call the dialog window to open a file in the directory.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = p_indir
    IMPORTING
      serverfile       = p_file
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc NE 0.
    MESSAGE i002(zreiabsintfmc).                 " Failed to open the file.
    EXIT.
ENDIF.
ENDFORM.                    " file_open_dialog
*&      Form check_dir_change
*       text
* --> p1        text
* <-- p2        text
FORM check_dir_change .
CLEAR gs_dynpfields.
CLEAR gt_dynpfields.
gs_dynpfields-fieldname = 'P_INDIR'.
gs_dynpfields-fieldvalue = p_indir.
APPEND gs_dynpfields TO gt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = gt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_dynpfields INTO gs_dynpfields INDEX 1.
p_indir = gs_dynpfields-fieldvalue.
ENDFORM.                    " check_dir_change
Thanks for all your answers! The problem is now solved.
Edited by: Ning Hu on Apr 9, 2008 11:32 AM
Edited by: Ning Hu on Apr 9, 2008 11:34 AM

How to change the screen element of a single field in a table control

Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          wa_tc_zvoyg_col-screen-intensified = 1.
          MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
          screen-intensified WHERE screen-name = screen-name.
        endif.
      endloop.
    endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          screen-intensified = '1'.
          modify screen.
        endif.
      endloop.
    endif.
endloop.
Thanks in advance.

Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra

Add fields to Sales Order Mass Change selection screen

Hi,
Li & Fung customer customer needs to include following fields in the selection screen (Header Level) and the display output in Sales Order Mass Change (/AFS/MDC).
-     VBKD-BSTKD_E
-     VBKD-KDGRP
According to the SAP documentation we have done the configuration (Add details of custom fields) and implemented the BADI u2018/AFS/MDC_SELECT_CUSTOM_FIELDSu2019 with following methods.
-     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_HEADER
-     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_CUSTOM_DATA
Data selection part works perfectly, but if we do not enter any values in any custom field in the selection screen, then the BADI is not working. The output displays the columns without any value for the custom field. However, for VBKD-KDGRP is added as a custom field in the selection, but it already exists in the output display by standard, and it does display the value.
The system should display all custom fields values even if we did not input them as part of the selection screen
I would like to know if we have missed something, or is it the expected behavior of this enhancement, which seems to be inconsistent. Also please advise if there are any other methods available to solve this issue.
thanks very Much.
Nilmini

Hi Nilmini,
In My case, I have added custom fields to MDC change screen by using /AFS/MDC_CHANGE_CUSTOM_FIELDS but its not appearing in Grid list display. Would like to appreciate if you can Help me to achieve this.
Regards,
Jelli

P.O change if i change only screen exit field the data is not saving

Hi ,
In the purchase order header custom tab i am added a screen exit field .In the purchase order creation mode the screen exit field is saving.But in the change mode if i am changing only the screen exit field then it is showing as 'no data to save' and not saving .But at the same time if i am changing some standard field with the screen exit field then both the field is saving.
I have to activate any field to save the screen exit field.Please let me know any exit to be activated for saving the data.
With Regards,
Ambrose

Hi
Pls keep a break-point in the PAI of Screen exit and check, whether it stops in change mode
Regards
Madhan D

Add fields in the SRM Change PO Screen

Hi SRM Gurus,
I have a requirement to add a buyer id and country id in the Change Purchase Order (Extended Search of the Find Screen).
Can anyone suggest which structure needs to be extended for adding the 2 fields so that it appears in the Change Purchase Screen as a searcheable criteria...
Thanks in advance.
Thanks and Regards,
Anu

Hi Anu,
Try the OSS Note 672960.
Here you will find all the structures that needs to be extended as well as the procedure to do it.
Hope this helps.
Thanks,
Pradeep

Field Description change in Standard screen

Hi All,
Can any one tell me how to change Field Description in standard screen.? No user exits available and without access key.
Ex :- if field description is DATE. i want to change it to 'Test Date'.
i dont want to change it Data element level.
Please do not give CMOD solution
Thanks
Sameer

Hi
If you don't want to use CMOD (changing the description for all system) nor use access key, changing the standard, you can create your own report, with the same screen, changing the name and after do a SUBMIT with your selection screen on the standard selection screen (standard report). Of course, it will be a customer development. It's an idea.
I hope this helps you
Regards
Eduardo

Work center screen sequence change

Dear Guru,
Can you guide me how to change the screen sequence of work center.
Regards,
Sanjay Sahoo

Dear Sandeep,
My requirement to change in sequence in Tab page.
I changed the sequence in OP13, But screen sequence does automatically change as per sequence maintain in OP13.
If we use the navigation tool, then only system take you to the next Tab Page which we maintain in the OP13.
Can it be possible to diaplay the Tab Page sequence as per OP13 at the time creation of work center?
Regards,
Sanjay Sahoo

How to change the screen field text in runtime

Hi ,
I want to change the screen button text in runtime IN ABAP dynpro screens. if anybody know this please post some helpful answer
Regards,
Anil kumar G

Hi Anil..
We can change the Text of a Pushbutton dynamically.
For this:
1. Declare a Global variable with the Same name as the Button in TOP include
Eg:   Data: Button1(30).
2. In the PBO module of the Screen assign the Text to this variable:
   Eg:
    Module set_text OUTPUT.
        Button1 = 'This is the text'.
    ENDMODULE.
<b>REWARD IF HELPFUL.</b>

How could I modify change ESS screen fields?

How could I modify the labels, of a webdynpro from ess. For Example in ESS's option "Working time" in the menu "Leave Request", we want to change the label "Type of Leave" for "Type of Abscense".
thanks

Hi, by using iview Personalization:
Go to Content Admin > Portal Content, look for your iview. Open in preview mode and press Ctrl + Right Click under the field to change its properties.
Regards

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

Excise Field sequence change required_MIGO screen

Similar Messages

Maybe you are looking for