Excise Register Not Getting Extracted.

Hello Experts ,
When i extract RG23Cpart1 & RG23C Part2 using J2I5 , the system shown extraction falure inspite of the fact that there are entries in the given period . I have verified by checking the J_1IPART1 & J_1IPART2 table entries . This problem is only for RG23C registers . I am able to extractact RG23A part 1 & 2 successfully.
Pls guide.
Regards
Anis

You need to verify at following path if you have assigned movement type 101 to RG23C at following path
Logistic general--Tax on goods movement -- India--Business transaction --Incoming Excise invoice -- Specify movement type involve excise invoice
I hope your problem will rectify
Regards
Vivek

Similar Messages

  • 103 movement type not getting extracted

    HI Gurus,
    103 movement type is not getting extracted in 2lis_03_bf.
    Do we need to do any config/code for this ??
    Regards,
    Sunita

    hi,
    Your specific error and resolutiobn is explained in
    SAP Note 827178 - 2LIS_03_BF/_UM: Individual documents not extracted
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=827178
    we had done the changes mentioned in the above note and resolved the issue in our system.
    regards,
    Arvind.

  • RG1 Register not getting updated

    Hi,
    Need your help on following.
    We have a scenario wherein the material is a BOM. The actual delivery happens for lower level items (like MS Angels) whereas the billing happens on Header Material (say entire Structure).
    Scenario has following steps
    Sales Order --> O/B Delivery of Lower level Items (PGI) --> Dummy Delivery of Header Material (No PGI) --> Proforma (Header Mat) --> Excise Inv. (Header Mat) --> Commercial Inv wrt Header Delivery
    Their is no prcing at lower item level for which Delivery & PGI takes place. Excise Details have been maintained for Header material.
    Now when we are trying to update RG1 register, its not getting updated. I am aware that RG1 Register is linked to Goods Movement in Delivery & but in our case their is no Goods Movmt. for Header Mat.
    Please guide how to overcome this situation so that RG1 shall be updated.
    Thanks & Regards,
    Khushal Agrawal

    Moving this thread from ERP-MM to [ERP - Sales and Distribution (SD) General |SAP ERP Sales and Distribution (SAP SD);

  • Excise invoice not getting converted into INR from USD for an IMPORT PO

    Hi All
    I have posted one Import PO. Did MIRO for custom and CVD. MIRO doc was in USD which is getting converted into INR as per the exchange rate maintained in OB08.
    Then I did MIGO with the ref of comm invoice of MIRO. Now MIGO doc is posted in INR as per exchange rate maintained in OB08 for custome duty and Freight and base value.
    For Excise invoice , CVD is getting captured but  in excise tab,  base amount is showing in INR  and currency also shows INR which is correct.
    Total Basic duty (BED) , Cess and Hecess iamount s coming in USD but curency is showing INR. After posting the doc also it has not getting converted into INR and the same USD amounts got posted in Excise GLs and currency still showing INR.
    For example:--
    PO value shows
    Base Price -  2040.20   USD
    Custome   -     204.20    USD
    CVD         -      179.54    USD
    Cess on CVD      3.59    USD
    H Cess on CVd  22.44  USD
    Now in excise invoice in Excise item tab
    Base value - 99960 INR (converted at teh rate of 49 , exch rate type M)
    BED -   179.54  INR
    CESS  -  3.59  INR
    HECESS 22.44 INR 
    Here only currency is changed to INR but amounts are still in USD. After posting the doc also same result is coming, hence Registers are getting updated with wrong values.
    Can any one suggest what to do to correct this.
    Regds
    Mukta
    Customization for CVD maintained in Excise config -- company code setting-  exchange rate type for CVD is M.
    OB08 maintained for USD to INR for the current date.

    HI Tej
    All the Import cycle has created three documents.
    1. MIRO doc for custom duties and CVD .--   MIRO posted in USD .  I can see the doc in both currency -  INr and USD via accounting doc - display currency.  I do not have any issue.
    2. MIGO doc - for custom duty and Freight -   MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document-  Display currency and even in the MIGO -- purchase order history tab.
    3. Excise Invoice - for CVD -  EX Invoice posted in diifferent way --
    In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
    in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
    Condition type JCV1 is also marked with currency conversion and accruals.
    Is there any patch or note I need to apply to getting this converted , or any process issue.
    Regds
    Mukta

  • Excise duty not getting calulated in MIRO

    Dear  MM Gurus,
    User has caputured an excise invoice and entered a GR with reference to the excise invoice and posted excise invoice
    then user has reversed GR and without reversing(ie cenvat posting),he has made the GR.
    Then he has posted cenvat (part-II)
    Now during Miro,excise duty amount is not getting calculated
    also excise invoice shows, duty credit is not availed but it is inventorised.
    How to take credit and post MIRO ?
    Thanks & Regards,
    S.S.Reddy

    for excise calclated in miro
    check entry in
    img-logistic general-tax on good movement-india-basic setting-determination of excise duty_-maintain excise default_
    check urs tax procedure & condition here

  • Delta  reocrds are not getting extracted . Problem with delta Quaue

    Hello friends .
    Could you please help me in this scenario ?
    It’s related to delta load from application 12 ,  - 2LIS_12_VCITM.
    Some how data is not getting transferred from LBWQ to RSA7 . There are more than 200000 entries in LBWQ , but the job is not able to transfer any entries to RSA7.
    For rest other application , data is going correctly .
    The job status showing is correct , like XXXXX LUW are transferred … there is no error in Job log , it technically correct .
    I have found one notes , in SAP service market place , but still it doesn’t match with my job status . My job status is NOTESID  ..where as per the notes it should WKEDPI*** ( something like this ) .
    I have taken below steps to solve this problem but still it doesn’t work .
    1.     Removed job from schedule ( the job for LBWQ to RSA7 ) and Executed the job manually .
    2.     Executed Program RMSBW12.
    3.     Deleted the Delta Q from RSA for application 12 and regenerated the same once again by running the infopackage , early delta initialization with out data transfer , . Once Delta Q is generated , run the job once again .
    I hope , I tried with all correct way ..but still I could not able to transfer the data .
    But with all above steps , still data is not transferred . Daily infopackage is running as per the schedule , and bringing only 0 record . If it still doesn’t work then I have to do Re-initilization .  and this is big cost for us . as we have to lock the sys for users and so on .
    Could you please give me some tips , that how can I transferr the data from LBWQ to delta Q ( RSA7) . If it works then definitely , I will save my lot of time .
    Please suggest me , how can I proceed . Please save me from this situation.
    Many many thanks in advance.
    Regards,

    Hi Akshay,
    Go to SMQ1 and check MCEX12 Queue. If your delta records are piling up in SMQ1 and not being transfered to RSA7, you need to check your back gound job control option once again.
    The back ground collector job will collect the recrords from SMQ1 and push to RSA7.
    Try to execute RMBWV312 program in SE38 and manully push all the recrods to RSA7. Once all the records are available in RSA7 you will find the MCEX12 queue will be cleared in SMQ1.
    Cheers
    Praveen

  • Excise duty not getting captured for export scenario-Urgent

    Dear All,
    When I am creating the export sales scenario then excise component is showing in condition records, even while creating the excise invoice the excise component reflects in the invoice. But once the excise invoice is saved & i go to display of excise invoice then the excise components are coming as zero.
    During creation of excise invoice if i click on utilization button and come back on main screen without any changes, then also the excise component are getting nil.
    Can anybody please suggest the reason & solution for this.
    Thanks & Regards,
    Antima

    Dear Antima
    1)  Go to Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations.  Here see for your Excise Registration, whether the box is selected for "AED" and "AT1".
    2)  Go to Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Groups.  Here see for your Excise Group, the box is ticked for "Automatic Posting".
    I think somewhere your settings in this area (Tax on Goods Movements) is missing and I cant figure out exactly.  Anyway please check the above two areas.
    thanks
    G. Lakshmipathi

  • WAR file is not getting extracted even though server.xml is configured

    Hi all,
    I'm using tomcat 4.1...
    I created the rmitunneler.war file which contains one servlet and configured the server.xml as the following:
    <Context path="/rmitunneler"
    docBase="/opt/uas/rmitunneler"
         crossContext="false"
         debug="0"
         reloadable="true"
         allowLinking="true"
         caseSensitive="true" />[/b
    I also put the war file in /opt/uas/rmitunneler and restarted tomcat, but the war file didn't get extracted. I tried to put the war file one directory above (/opt/uas) - but again with no success.
    What could be wrong?

    From the Tomcat document :
    "The Document Base (also known as the Context Root) directory for this web application, or the pathname to the web application archive file (if this web application is being executed directly from the WAR file). You may specify an absolute pathname for this directory or WAR file, or a pathname that is relative to the appBase directory of the owning Host."
    I believe you need to put the file name in the docBase:
    docBase="/opt/uas/rimtunneler.war"

  • Excise Invoice not getting printed directly.

    Hi ;
    Our client earlier using J1Ip with sp01 for printing excise invoices.
    As per new requirement through J1IP only direct printing is required so that there is no need to go SP01.
    I have using print immediately setting in VF02. As well as VV31 also maintained.
    Still system is genearting spool request & need to go to Sp01 to print the invoice.
    Can somebody help me in this regards;
    Thanks;
    Anita

    Hi
    Anita
         As told by u everthing is corect. Please check the SAP LPD is getting open or not while u firing print out ? Please load lpd files again.
    Hope this will help u.

  • 0NOTIFICATN Status - Newly defined status does not get extracted?

    Hi All,
    There are few status defined in the SBIW under NTF1 and when extracting 0NOTIFICATN all these status are showing up. I need a new status need to be brought in from ECC. I went and added the status DLFL in the status maintenance of SBIW and when extracting 0STATUSNTF1_TEXT, I see the newly added status shows up, but However when I extract 0NOTIFICATN_ATTR, the new status does not come for any of the notifications.
    Does any one know why it is not picking up the new status that I defined? Is there any other steps missing to get the status?
    Any help is appreciated.
    Thanks,
    Alex.

    Dazed,
    I think you can assign any status to any STATUS* field. If you look closely you can see same status such as 'DLT' etc is assigned to multiple status. I am thinking more in line with order of status may be working here.
    01 - OSNO
    02 - NOPO
    03 - NOPR
    04 - NOCO
    05 - DLFL
    but the record has status in the following order
    NOCO OSTS DLFL. Since it finds NOCO before DLFL and the value of NOCO is given 04 and DLFL is given 05. NOCO seems to be taking the priority. I just want some one to confirm the way it behaves. Because the system is already defined with first 04 values and has been running the process for the past 2 years, and now I want to introduce the 05 as a new status.
    Does it makes sense?
    Alex.

  • STO - Excise tab not getting displayed in material document after posting.

    Dear all,
    We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
    It is plant to plant stock transfer with excise, the process that we are following as given below:
    1) STO PO - ME21N
    2) Outbound delivery - VL10B - Post PGI in VL02N
    3) Outgoing excise invoice - J1IIN  - With the key DLFC.
    4) GR - MIGO with excise invoice capture.
    During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
    But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
    Request to please do let us know if we have missed out on any configuration or master data.
    Regards,
    mahesh.

    Hi,
    Do the all customization setting for CIN for reference check the following link for India. and Material management
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    You have to maintain Excise master data for material,vendor and PLant in J1ID .
    reward if helpful,

  • FIM - Data is not getting extracted from BPC

    Hello,
    I have created FIM job to load data from BPC NW to PCM. The FIM job is getting executed successfully. But there is no data loaded into PCM. I can see data in BPC.
    I have checked data services job log. It also shows successful completion. But there is no record in the target table of extraction dataflow.
    Can anyone please help in finding the issue and resolving.
    FIM version is 10.
    Thank a lot in advance!
    Regards,
    Rajesh

    Hi,
    An error log is found at BPC side corresponding to the FIM job execution. Log is given below.
    Can anyone help me to understand the issue here and how to resolve?
    C Tue Feb 17 16:13:47 2015
    C  *** ERROR =>   execute() of C_0792, internal error : no result set
    [dbsdbsql.cpp 1579]
    C  {root-id=001B21585E281EE4ADD4D9C1E11853C4}_{conn-id=001B21585E281EE4ADD4D9C1E11873C4}_1
    C  *** ERROR => EXECUTE C_0792 on connection 0, rc=-9300
    [dbslsdb.cpp  9682]
    C  SQLCODE    : -9300
    C  SQLERRTEXT : Internal error : no result set
    C  sc_p=7f0b4afe8150,no=792,idc_p=(nil),con=0,act=1,slen=171084,smax=171264,#vars=0,stmt=7f06a0ddd3b0,table=
    C  MDX SELECT
    C    NON EMPTY {
    many lines with actual BPC data
    C  NTH1].&[TRGT_20_22_PPMD] } } ON 0
    C  FROM [eSight02_CORPORATE] CELL PROPERTIES VALUE  ;
    B  ***LOG BY2=> sql error -9300 performing OPC [dbds         437]
    B  ***LOG BY0=> Internal error : no result set [dbds         437]
    Thanks and Regards,
    Rajesh

  • Excise Invoice not getting Cancelled

    Dear Gurus,
    I am facing a problem in canceling the Excise Invoice as it is giving an error that FI/CO Interface: Update call without successful check.
    please help.
    Thanks in Advance
    Ameet Singh

    Maintain the Cancellation Excise Invoice Type CEIV in IMG path Logistics-General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction.  Also ensure that the respective G/L account is assigned in the next tab.
    G. Lakshmipathi

  • Product description- is not getting updated..

    Hi APO Expert,
    I am getting error in description of product - it is not getting updated..
    Material description is changed in R/3 same is not getting extracted in APO. However, other forecast data and transaction data of extracted successfully. Please note Product start data is maintained from few days onwards.
    Regards

    Hi Rushikesh,
    Go to CFC9 in R/3 and check what value do you see for material master change transfer:
    1) If it's blank, you won't get changes from R/3 to APO. If your CIF jobs run daily, then change the value of 1. Changes will come to APo after CIF job for material will finish.
    2) If it's 1, then you need to re-CIF the material to get the changes in APO
    3) if it's 2, only then the changes are supposed to happen immediately when you change the description in R/3. If your setting is 2, then you need to check if an active integration model (IM) exists for your product or not. Go to CFM5, give your product and check if an active IM exists.
    PS: not clear regarding your comments about forecast. Forecast could go from APO to R/3, and not the other way around.
    Thanks - Pawan

  • Excise register in SD

    Dear All
    Which excise  register wil get updated on SD transaction,whether all invoices created will reflect in RG register or utilised part will get rfelected
    Can any one send screen shot of excise register
    My mail id is [email protected]
    Regards

    Hi,
    It will be updated with all the excise invoice created in J1iin, ji1h and j1is and also the utilisation details when you run the j2iun.
    Regards,
    Murali

Maybe you are looking for