Excise duty not getting captured for export scenario-Urgent

Dear All,
When I am creating the export sales scenario then excise component is showing in condition records, even while creating the excise invoice the excise component reflects in the invoice. But once the excise invoice is saved & i go to display of excise invoice then the excise components are coming as zero.
During creation of excise invoice if i click on utilization button and come back on main screen without any changes, then also the excise component are getting nil.
Can anybody please suggest the reason & solution for this.
Thanks & Regards,
Antima

Dear Antima
1)  Go to Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations.  Here see for your Excise Registration, whether the box is selected for "AED" and "AT1".
2)  Go to Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Groups.  Here see for your Excise Group, the box is ticked for "Automatic Posting".
I think somewhere your settings in this area (Tax on Goods Movements) is missing and I cant figure out exactly.  Anyway please check the above two areas.
thanks
G. Lakshmipathi

Similar Messages

  • Add. Excise duty not picking up for capital items - Country India version

    Hi
    While capturing duty using T.code J1IEX for Imported capital items Additional Excise duty is not getting captured properly. 50% should have been captured fot the current year and the balance carried forward to the next year.
    Help reqd.

    Hi,
    Have u defined AT2 in Specify Excise Accounts per Excise Transaction and CENVAT on hold under CAPE transaction type. Have u defined G/L account for these under Specify G/L Accounts per Excise Transaction.
    whether material in question has been defined as Asset type in J1ID. check all these configuration.
    Regards,
    Venkatesh

  • Excise Duty Not  geting calculated in Export excise Invoice

    Hi;
    As subject line specifies; in J1IIn for export excise invoice after pressing the calculate button system does not calculate the excise duty in document. This leads to no value in ARE1 & no consumption of  bond Value.
    Kindly let me know  what kind of data is missing.
    Avinash

    Hi Avinash,
    Could you help yaar ...if you got solution for it ..I am facing same problem..We are going live very soon,
    help of ur's could help me lot ..My mail id [email protected]
    Thanks in advanec in for your help.
    regards,
    Vijay Khochare

  • Excise duty not getting calulated in MIRO

    Dear  MM Gurus,
    User has caputured an excise invoice and entered a GR with reference to the excise invoice and posted excise invoice
    then user has reversed GR and without reversing(ie cenvat posting),he has made the GR.
    Then he has posted cenvat (part-II)
    Now during Miro,excise duty amount is not getting calculated
    also excise invoice shows, duty credit is not availed but it is inventorised.
    How to take credit and post MIRO ?
    Thanks & Regards,
    S.S.Reddy

    for excise calclated in miro
    check entry in
    img-logistic general-tax on good movement-india-basic setting-determination of excise duty_-maintain excise default_
    check urs tax procedure & condition here

  • Custom duty is not getting captured

    Dear all,
      I have configured import pricing procedure and craeted PO with that pricing procedure.While capturing the Custom duty in miro,value and Quantity is not getting captured in it.As per the procedure import purchasing i m following steps given below
    1) I m creating Import PO
    2)Capturing custom duty in miro with defining commissioner of customs as a vendor
    3)Capturing excise invoice at the time of good receipt
    4)Posting excise invoice.
    5)Miro for capturing the goods cost for normal vendor 
       Pls. help me out for this.
    Thank and Regards
    Vaishali G.

    hi vaishali,
    i have confgiured, a import pricing schema, and enters all values manully in po, and its not calculated in invoice tab like local purchase,.
    can u tell me, what will be the finace impact of this, and is it correc to do this, does this will have any entry on CIN  tables.
    pls reply,
    asif

  • Select-option value is not getting captured in at selection-screen on value

    In Selection screen , we have Select-option and  a parameter.
    Based on the values given in Select-option, the values of Parameter should get populate.
    To achieve this functionality,
    I  used  At selection u2013screen  on value request  for <parameter>  EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
    But the Select-option values are not getting captured in this event,unless u press Enter key.
    Is there any other way to achieve this functionality.
    Please Guide me.

    When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
    Jonathan
      data:
        l_repid             type syrepid.
      l_repid = sy-repid.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          dynpprog         = l_repid
          dynpnr           = '1000'
          dynprofield      = 'S_FIELD-LOW'  "Select options - low value
    * etc

  • Profit Center is not getting captured in Vendor line item from MIRO.

    Dear Friends,
    Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
    We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
    Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
    I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
    Looking forward for your kind cooperation in this matter
    Thanks & Regards,
    Naveen Kumar.

    Hello Naveen,
    I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
    The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
    About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
    - 826357     Profit Center Accounting and new general ledger in
    I hope this helps. If not, please provide an example of your requirement.
    Thanks and regards,
    Suresh Jayanthi.

  • Excise Invoice cannot be captured for RG1(Finished Goods) material

    Dear Friends,
    While creating GR and choosing the option only capture Excise Invoice system showing error as follows:
    Excise Invoice cannot be captured for RG1(Finished Goods) material
    Message no. 4F276
    The Material is a Raw Material(ROH) and Price control is "V".Pl tell me and earlier 3 times GR is done on this material w/o error.
    Pl help me how to get rid of this error.
    Regards,
    Ask

    In GR check in Excise item tab under excise item whether it is showing Raw Material or Finished goods?
    Simulteneously check in J1ID for the said material & chapter-id combination what material type has been maintained?
    Regards,
    Indranil

  • VA00 condition type not getting determined for the returns order

    Hi All,
    I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
    When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
    Note:VA00 condition type is getting deleted from the  internal table tkomv[].
    If any one came across  this scenario can you please help me.
    Request your valuable inputs

    Hi,
    Please check the copy control setting in VTAA.
    Maintain the pricing type as "D" at item category level for the respective document type .
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • SAP R/3 -- Not getting prompted for password on Heterogeneous Sys. Copy

    Thank you in advance.  I am part of a project team that is testing the potential of moving from UNIX (AIX 5.3) to Linux (RHEL 4 or 5).  We are running SAP R/3 on IBM P570 with DB2 v9.1 and when we run this program:  Installation master sapinst
    We are not getting prompted for the user password but when we run the same cd on a different system we get prompted for the user's password.  Can anyone point me in the right direction on what is wrong?  If you need more info let me know.
    Thanks,
    Erik

    @ Sven & Markus
    Well I have checked all the logs and there are no errors.  What I have found out is that it successfully runs but there is 0 ouput, in essence it isn't exporting any data.
    Here it shows that it completed successfully but in the export directory there isn't data when there should be.
    INFO       2009-10-08 17:34:19.270 [sixxcstepexecute.cpp:544]
    The installation of component Execution of Service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy
    > IBM DB2 for Linux, UNIX, and Windows > Source System Export > Central System > Based on AS ABAP > Database Instance Export has been completed successfully  has been completed successfully.
    See here:
    /dev/exportlv    119.25    119.23    1%       16     1% /export
    Thanks,
    Erik

  • Payment Terms not getting updated for local Purch Org Vendor Combination

    Hi
    I have updated the vendor master with new payment term in EBP. The same got updated for Back End Pucrh Org. But it is not getting updated for local Purch Org. I am using extended classic scenario and have BE and local Purch Org.
    I anybody can tell me the solution on how to update payment terms for Vendor with local Purch Org. Thanks
    Regards
    Vinod Raorane

    Hi
    Which SRM version are you using ?
    <u>How you replicated the Vendor master in EBP ? Which transactions or programs you used ?
    Have you used  BBPGETVD Transaction or any other program ?
    And also checked the log of SLG1 transaction. ?
    Can you see the updated details in  BBPMAINTINT Transaction for that vendor
    Any other logs you noticed in SLG1 or ST22 Transaction ?</u>
    Please refer to following links.
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/43/1f8c03b8c606f4e10000000a422035/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/d3/4b9c3b122efc6ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/81/e08194b6e4734f8dde536e8b8ac4a0/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/92/fd7d3cb7f58910e10000000a114084/frameset.htm</b>
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • Excise duty not capured..?

    Hi gurus
    Can anybody giv  some inputs..
    I hav recd goods, excise duty not capured thru J1IEX, material was consumed,
    In this case how can i capture the excise duty after MIGO..?
    Please explain me some inputs..?
    Thanks
    sap-mm

    Hi,
    You can pass JV with transaction code J1IH by selecting "additional excise' tab.you can give the amounts and also excise invoice number
    regards.
    prasad

  • Excise Duty Not appering in GR

    Dear all ,
    Excise Duty Not appering in GRn for PO  ,what may be the possible reasons ?
    Pl guide

    Hi,
    Pls check the J1ID
    1. Material maintained in J1ID for that plant
    2. Input and output material declared for the plant
    3. Vendor excise maintained
    4. Excise indictaor for the vendor maintained
    5. Plant excise details maintained in J1ID

  • Role Tab(section) is not getting captured through CATT script on PI/XI.

    Role Tab(section) is not getting captured through CATT script on PI/XI system
    I am trying to create CATT script for user creation and role assignment on PI/XI. Every screen except ROLE and GROUPS is getting captured.

    Hi Plaban,
    I have had the same problem in the past but I didn't investigate too far. 
    What I prefer to do is have 2 scripts.
    1. User Creation using SU01
    2. Role assignment using SU10

  • Partner details are not getting captured to the purchase order from the ven

    Hi,
    Issue : ( ECC PO)
    Partner details are not getting captured to the purchase order from the vendor master.
    We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
    Any suggestions are highly appreciated.
    Regards
    Sudhakar

    Hey Sudhakar,
    I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
    If this is working properly for standard POs, then,
    Go to Partner detrmination under Purchasing>  Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
    and enter teh appropriate document type and refer it to the procedure you have for NB Pos

Maybe you are looking for

  • Sales Order- Invoice Cancelled

    Hi Gurus, Our case is Order related invocie. I created a Sales order and generated an invoice against to this sales order. and due to some reasons i canceleed the invoice. No when i check the report for Open sales orders the system is showing this sa

  • Built-in microphone not working

    I can't get my Imac's microphone to work, all that is heard is static and doesn't seem to pick up any sound at all. Anyone know how to solve this?

  • Problems with itunes starting up

    I can start itunes but i can't do anything with it. it just sits there and does nothing whatsoever no error messages pop up  so i can't exactly judge whats wrong with it help me please.

  • Query optimization...provide thoughts..

    Could someone suggest improvements to my query? SELECT 'B'||','||GC.GEO||','||GC.PROD||','||','||','||','||','||','||SUM(GC.FACT_AMT)||','||GC.CURRENCY||','||GC.DUE_PERD||','||GC.MEASR content FROM (SELECT FD.GEO,FD.PROD,PROFT_CTR,FD.MEASR,(FACT_AMT_

  • Auto complete of urls missing in safari 6.0

    am a newbie to mac and slowly learnin on... my safari got updated recently. in the previous versions just entering the name and pressing enter would automatically take me to the site i wanted. Eg:  hotmail + enter would take me to www.hotmail.com ...