Excluding holidays from interest calculation

Hi All,
Question:
How to exclude the holidays from interest calculation (item interest calculation)?
Situation in details:
I have configured the Item interest calculation in SAP. Using the transaction FINT and FINTSHOW interest is calculated and interest invoices are posted as required. Everything works fine... BUT! Now I have to exclude the holidays from interest calculation.
In configuration ( Interest Calculation Global Settings -> Prepare Item Interest Calculation ) I have selected the "Factory Calendar ID" but it doesn't help. I have also checked the calendar - all public holidays for 2009 and 2010 are defined there, however interest calculation still doesn't exclude these days.
Any ideas? Should I do any additional config. somewhere else?
Need your help!
Regards,
Vlad

Hi Vlad,
Unfortunately there is no standard way to do this in SAP (ie via configuration or any particular setting).
You will have to customize the function module behind FINT that uses the calendar and skip holidays when processing.
Regds;

Similar Messages

Exclude Holiday hours from overtime hours and add into regular hours

In our current scenario any holiday hours are included in Overtime hours. We want to exclude these holiday hours from overtime hours
Two examples:
In one week an employee works 35 regular hours, with 8 holiday hours, for a total of 43 hours. Currently, the employee would get 40 hours of straight time, with 3 hours of OT. The change required is that it should have 43 hours of straight time, with no OT.
Another example - In one week an employee submits 42 hours of time, with 8 holiday hours for a total of 50 hours. Currently, the employee would get 40 hours of straight time, with 10 hours of OT. With the change, the employee would receive 48 hours of straight time, with 2 hours of OT.
In summary any holiday hours should be included into regular hours not in Overtime hours.
Which setup changes are required to achive this functionalty?

You can exclude the holiday hours from the OT calculation by excluding it from the earning group setup.
--Shiv

FINT interest calculation on cust overdue items from net due date required

Hi.
I am running FINT option i am running interest calculation from net due date onwards whereas the system is calculating the interest from Next date of due date.
For example: Customer invoice is raised on 01.01.2011 and Net due date is 01.01.2011. I gave the option in the interest calculation - SPRO - FINANCIAL ACCOUNTING(NEW) - ACCOUNTS RECEIVABLE AND ACCOUNTS PAYABLE - BUSINESS TRANSACTIONS - INTEREST CALCULATION - PREPARE ITEM INTEREST CALCULATION, Ref date as as 1 - Value date (Baseline date from Net Payment).
Still the system is calculating the interest from 02.01.2011 instead of from 01.01.2011.
Can anyone help me in this regard.
Regards,
Padmavathi

Hi,
We can calculate interest on items cleared with in the calculation period.
When you are calculating interest on open items, system will check open items as on the Calculation Date.
But if you want to calculate Interest on items cleared with in the calculation period., you have to check Calculate Interest on Cleared Items also.
For Instance: If you are calculating Interest on 31st July for the period of 01.07.2009 to 31.07.2009, in this case
some open items are already cleared with in this calculation period, even though you have to calcuate interest for those cleared items for that many days. System will calculate interest for that many days.
Try with this option, still if you need any help please let me know.
Thanks
Chandra

Exclude a version from the calculation

Hello,
In our model we have a version used uniquely to upload data. When the system starts to calculate, it includes this version. We have tried to lock the version,but it still included in the calculation.
We would like to know if is possible to exclude this version from the calculation in order to optimize the calculation.
Thanks in advance,
Best regards

First of all, thanks for your responses.
We would like to develop option 1 from Michaels' solutions, because we have too much LineItems (about 2000) for the option two. So we think, option 1 will be easier.
The version we are going to exclude is "Initial Charge". Are you suggesting we should make next rule?
       Function CellValue
          RestrictDimension("Versions","Initial Charge")
          CellValue=0
      End Function
In case of excluding a single period from that version, next rule would be correct?
      Function CellValue
         RestrictDimension("Versions","Initial Charge")
         RestrictDimension("Periods","January")
         CellValue=0
      End Function
Thanks again
Best regards!

How to exclude weekends/holidays from BPEL Wait activity?

I can configure the duration of a Wait activity using duration expressions, or specifying some time in the future. However, I have a use case where the Wait should only consider weekdays which are not holidays. Something akin to tying the Wait activity to a business calendar. Don't really need the sophistication of a business calendar, but at least would like to be able to only include weekdays and not weekends. I read somewhere that BPEL uses Quartz to implement the Wait activity.
http://enterpriseglue.com/index.php?option=com_content&task=view&id=37&Itemid=44
However, I can't find a way to configure the Wait for anything other than standard durations. Seems like Quartz does support the notion of business calendars. Here is a sample.
http://www.quartz-scheduler.org/docs/cookbook/FifthWorkingDayTrigger.html
If anybody has found a way to exclude weekends from the Wait activity in BPEL, or has some idea how it might be done, please share.

Hi Harrie:
Not sure I understand what you did. Suppose, for example, that I am setting the Wait duration to P5D. But I want to wait 5 business days instead of 5 calendar days. Do you first calculate what the end-time would be and then set the Wait expiration instead of the duration? In other words, waiting UNTIL a particular time, instead of waiting FOR a specified duration? Is this how you are doing it?
Tks.

Interest calculation from invoice date

Hi Friend
Customer invoice date : 01.08.2014
Due date is (20 day's) : 20.08.2014
Customer make payment on 25.08.2014,
if we calculate interest in sap count the 5 Day's (21.08.2014 to 25.08.2014)
but client is requirement is interest calculation on 25 days (01.08.2014 to 25.08.2014). any standard setting is there are customization are required....?
Regrd"s
Mallesh

Hello Mallesh,
You need to review your payment terms which are assigned in the Customer/vendor master data.
regards
Ray

Interest calculation on openitems only

Hello All,
How to restrict calculation to Open Items only via configuration when the system calculates interest on arrears. I have checked the options for interest on arrears and there is no option to restrict via customizing.Ofcourse, there is an option to calculate interest on open item in Item interest calculation but looks like the changes made for the item interest calculation (t056UX) will not work here for t056U(calculation on arrears).
In f.2b , It is possible to exclude the cleared documents via dynamic selections as per the SAP note provided long time back. But this is only a work around.
Any suggestions to restrict via configuration for int. on arrears for open items only?

Hi,
While creating reference interest indicators give the calulation from date (your required date). Then the system will calculate from date whatever you have mentioned.
Assign Points if useful
Regards
Ravindra

Inquiry on Interest Calculation using Interest on Arrears for Accounts Rece

Question:How can we calculate interest on the number of days from the document date, but only start selecting the item for interest after the item is past due?
Scenario:
Document date - March 18th
Due date - April 2nd
Desired results:
1) When running interest at the end of march the invoice will not be selected (as it is not past due)
2) When running interest at the end of April, Interest should be assessed for 12 days for March and 30 days for April (if past due, interest is calculated from the original document date and not the past due date).
Attempt:
In config I tried to set up the Interest Indicator (in Prepare Item Interest Calculation) to have Ref Date as Document Date, but the calculation still returns only 19 days for April (using due date).
Does SAP support this business requirement?
Thank you,
Rachel

Hi,
Please make use of the event 2010-Interest: Exclude Items.
Here all the line items on the account are passed one by one and records which are eligible for interest calculations are retained and rest are excluded by RAISE item_blocked.
You can put the check in this event on the amount.
Regards,
Gaurav.

Dunning interest calculation

Hi All,
When I checked table MHND, the dunning interest is calculated in such a way that it doesn't consider the previous dunned date.
Meaning :
Dunning ran on 12-01-09 interest calculated is 500.00 ( 2 docuemnst considerded from bsid as seen from table MHND )
Dunning ran on 15-01.09 interest calculated is 500.00 ( same as above)
Ideally for Dunning ran on 15-01.09 , it should not calculate interest since on 12th it is done..!!
Now queries:
1. Where can i see these interest calculated during dunning run ( any report ? ) other than table..? In std SAP, is this interest
calculated and shown only in the dunning letter ..? Does it have any other financial impact on outstanding..?
2. when I try to run the single dunn. notice, and see sample print out it gives message as
Account D 0004298846 is blocked by dunning run 20090319 MDUN1
why is it so and how to resolve..?
thanks,
Neha

can some one provide some advice on this..?
thanks,
Neha

Bank Interest Calculation on Opening and Closing Balance

Hi Experts,
I have quiry on bank interest calculation. when was run F.52, giving one months (01.04.2008 to 30.04.2008) calculation period that time system calculate interest from 01.04.2008 to 30.04.2008.
System calculate interest on Balance Carryforward amount.
But why the system do not calculate interest on Closing Banlance ?
1) We do not want the system to calculate interest on Balance Carryforward Amount.
2) And we want the System to calculate interest on 30.04.2008 (that is on closing balance).
How this can be done?
Reliable answer get huge points
Regards,
Jemes

vlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
You may have to develope your own ZMB5B program and calculate yourself what is not stored in SAP.

Customer Interest Calculation - Customer Receipt

Hi All,
We have implemented Item Interest Charges for Customer w.e.f Feb 12
We executed the Interest Run for Jan.12(our first cycle). and the system has posted Interest document for all relevant customer with applicable interest rates in Jan12.
In Feb12, we received a receipt from a customer for (whom we executed the Interest run) specific to a sales invoice.
When we tried to clear off the sales invoice the system does not allows to process customer receipt because interest amount has not been paid by customer.
Accounting department don't want to process Partial/Residual payment for the above transaction.
Now our management requires that we must have an option to set off the interests charges separately and the interest charge must not be included with sales invoice on customer receipt.
Lets take an example (for one customer with same currency)
Sales Invoice 1. 10000EUR
Sales Invoice 2. 5000EUR
Sales Invoice 3. 15000 EUR
Total Open item 30000 EUR
Interest Calculated for the above invoices (line item) Doc No Interest .1
Interest Amt : 100 EUR (Sales Invoice 1)
Interest Amt : 50 EUR (Sales Invoice 2)
Interest Amt : 150 EUR(Sales Invoice 3)
Overall Balance end of Jan12 (after Interest Run) : 30300 EUR.
We received a payment for Sales Invoice.1for 10000 EUR on 5 Feb 12(customer has not paid the interest amt for sales invoice.1)
When we process customer receipt (F-28 or F-30), the system is showing an details as Gross : 10000, Partially Paid Amt 100- and when we select the specific invoice the system displays an overall 10100 EUR.
Now our Question is that, is it possible to clear individual sales Invoice (with its original value) and Interest charge separately.
i.e as per the above case 10000 EUR separately & 100 EUR separately or entire interest amount (300EUR) separately, two different customer receipts.
As customer state that he will pay the Internet amount separately (as we have generated the Invoice for interest charges) might be complete 300 EUR in single payment or partial.
Can you provide any lead/workaround to overcome this scenario.
We are in ECC 6.2.
Do revert
Regards,

Found the solution. Just remove the tick from Include Invoice ref.in editing option.

Interest Calculation on only future Open items

Hi,
We are adopting the interest calculation functionality, we do not want to calculate interest on past open items, i.e, if we go-live on 15.06.08 we do not want to calculate interest on open customer items before this date. We want to calculate interest for all future open items after 15.06.08.
Does anybody has any answer for this. Can you please guide me in this.
Thanks,
Srini

Hi,
While creating reference interest indicators give the calulation from date (your required date). Then the system will calculate from date whatever you have mentioned.
Assign Points if useful
Regards
Ravindra

Arrears Interest Calculation on AR Balances

Hi,
I am trying to calculate the Interest on AR Balances and was able to successfully post the entries also. But the problem is the next month when I am running the interest calculation, I want the system to avoid calculating Interest on the document posted for Interest Charges last month to the customer account.
For example, I have an open item when the first time I calculate Interest. The programs calculates Interest and posts a document. Next month, I want the system to calculate interest only on the original invoice or just the invoices, but not on the document posted for Interest, last month.
Thanks,
Madhav

Hi,
Took an alternative approach to resolve the problem. Created a seperate document type for posting the Interest Journal Entries and when executing the Interest Calculation, excluded this document type.
Thanks,
Madhav

Interest calculation on security deposit H

Hi,
I have configured the special GL Indicator H and i received the amount against the Indicator H against the Customer. Now i want to calculate the Interest on Security deposit.
1. it possible to calculate the interest on SD?
2. Same customer is applicable for open item interest.
If i am getting any answer it would be greatful for me.
Please i am waiting for your reply Eagerly.
Thanks
Sriram.

Dear Sriram,
It is possible:-
1.You have to create Interest Calculation Type for Customer SD Int Calculation say (R1)
2.Go to OBAA and maintain R1 there.
3.Go to Prepare Sp GL Transaction Interest Calculation (Maintain R1 - D - H - R1
4.In OBAC Maintain R1and select from date
5. Define Time dependant interest terms
6.In OB83 define the rate of interest
7.Go to OBV3 and maintain Account Determination for Int Posting (Select Account Symbol for Posting Key and again Assign GL code to same Account Symbol)
8. Maintain R1 in the Customer master to whom Interest will be payable.
Then Run Interest calculation posting T Code:-f.52
Regards,
Alok

Interest Calculation on Arrears

Hello, I have configured interest calculation for A/R and I am using FINT transaction to run an interest calculation by item. I have 3 problems:
1.- Even I mark "Test run" in transaction FINT, it will do the posting.
2.- Even I select only one item and select the " Process selected item" icon, it processes all items in the run, using FINT
3.- Even the "only debit" flag is selected in the configuration, when i do the run in FINT, it's bringing credits and debits.
Would somebody please tell me how to correct these 3 issues. Thank you!

HI,
Please check the configuration in transaction code OB82, wherein you have 2 different options.
1. Interest on the open items plus items that are cleared from the last interest calculation date till the time you are running the calculation now. The item can be cleared either thru a payment or credit memo or adjustments etc.
2. Similar to option 1, but the cleared items are considered only if the item is cleared against a payment. This will not consider the items cleared thru credit memo etc.
Assign points accordingly.
Thanks,
Madhav Nanduri

Excluding holidays from interest calculation

Similar Messages

Maybe you are looking for