Exclusive Free Goods Based on Value irrespective of the material.

Dear Community,
Our Client wants to provide a stock clearence scheme to his customers that
for a billing of INR 100000 or above his customers can make another purchases worth of INR 10000 as free.
how can we customize the same in our system.
Ram Rastogi

Dear Ram,
Our Client wants to provide a stock clearence scheme to his customers that
for a billing of INR 100000 or above his customers can make another purchases worth of INR 10000 as free.
You can acheive this by using Group condition.
Create one condition type( Better copy from K007) and configure as following
Use same access sequence K007
Cond. class   - A Discount or surcharge
Calculat.type - B Fixed amount
Select Group condition check box
Scale basis   -B Value scale
Add this condition type in pricing procedure at appropriate position.
Maintain Condition record for the customer enter Amount as 10000.00 and click on scales
maintain scales as From 110000 Amount 10000
                                        220000 Amount 20000
This will give discount of 10000 on total purchase of 110000
and value of discount will be splitted in all items in proportion of the value.
try creating sales order and Update
Regards
Mayank

Similar Messages

  • Free Goods  based on order value

    Hello,
    We would like to setup a new promo - if your order exceeds $X, get a specified material for free.
    Is it possible to setup and how?
    Thank you for all your help!
    Mila.

    Yes. This scenario is very much possible, although I haven't tried.
    Refer the following SDN thread, which discussed of a similar sort requirement:
    - Exclusive Free Goods Based on Value irrespective of the material.
    In case of any further information or clarification or face any difficulty in applying the same, please do revert.
    Regards
    JP

  • Inclusive and Exclusive Free Goods

    Hello Folks,
    I wish to get confirmation on the following understanding:
    1. Free goods must be of the same material for  Inclusive bonus quantity method.
    2. For Exclusive method it can be either same or different material. Or must it be different material only?
    3. In both inclusive and exclusive, free goods is shown as a separate item entry with the item category TANN, for example.
    Cheers
    John

    Hi John,
    Please note as given below :
    1. Free goods must be of the same material for Inclusive bonus quantity method : It is not mandatory , we can use same material or different material .
    2. For Exclusive method it can be either same or different material. Or must it be different material only?: we can use same material or different material .
    3. In both inclusive and exclusive, free goods is shown as a separate item entry with the item category TANN, for example.: Yes , The item category will be TANN . with 100% discount.
    Thanks and regards
    Veera

  • Free Goods on NET Value.... not by quantity

    Dear All,
    In our company there is a unique scenerio:
    There are three Material Pricing Groups : MC , CD , MP3. Now a particular Bulk Buyer wants that if he orders any items from the above Mat. Pr. Groups... then for 15 and multiples of 15 he will get a value discount on the invoice value.
    For ex: customer orders 5 MC, 30 CDs and 15 MP3. Total is 50 and value before tax is say Rs.2050. Now, 50/13 = 3. The pricing should be (2050/50) * (50 - 3) = 41 * 47 = Rs. 1927

    Your question is about Value discount whereas your subject line says Free goods.
    Can you be more specific?
    In sales transactions, Discount and Free goods are completely different.

  • Exclusive Free Goods

    Dear Experts,
    In transaction VBN1, is there anyway where I can set "Exclusive" and Calculation type "2" as default. This is to prevent the users from accidentally maintaining "Inclusive" free goods. Thanks in advance!

    Hi Sager,
    Thanks for your feedback.However,  it doesnt solve my problem as I would like default it to "Exclusive" and Calcuation type needs to be defaulted to "2" instead of maintaining it manually.

  • Free goods based on selecting 5 material from a list of material

    Is there a way this can be done.
    I know FG cannot be done with 1:2 or 2:1, but if there was a way the list of material can be a selection list or something..Thanks

    first maintain material determination for freegood with multiple options of 5 products.. and then give maintain the freegoods record in CS01...
    Example  for X .. Y free good...
    material determination for Y... 1,2,3,4,5, products...
    so when ever you enter x you will get 1,2,3,4,5 options..
    Try with these.. hope you get your desired solution...
    reward if it helps
    Ramki

  • Free Goods based on Quanity

    Hi All,
    I have a scenario, If we buy M1 material 10 qty - I get M2 material free, If I buy same M1 20 Qty - I get M3 material free, If I buy M1 30 then I get M4 free.  How to handle this in free goods,
    Please let me know in what way can we handle this situation in SAP.
    Appreciate your help.
    Regards,
    Harish.

    Hi,
    in standard sap system u can give gree goods like buy 10 get 1 or 2 free, but not buy 10 and get 1 x mat free, and buy 20 and get 1 y mat free and but 30and get 1 z mat free.
    I believe this may not be available in standard system
    to achieve this  create a ZTABLE and mention all combinations u want to give and connect it to ur free goods combination through development.  for this sit with abaper and u can definitely do it.
    hope u get it
    regards,
    sadanandam kasarla

  • Re: Setting up free goods for a particular amount in the order.

    Hello,
    I have a scenario which I am trying to setup.
    If total amount of the order exceeds $x amount, customer gets a specified free item when promotion code is entered.
    For Promotion code we have a Field setup and we are using for normal pricing.
    Can anyone suggest!
    Thank you!
    Edited by: Das516 on Feb 3, 2012 8:59 PM

    Develop a routine in t.code VOFM ->requirements->free goods to check the order value. Then assign this routine in the requirements column for each condition type in the free goods determination procedure in t.code V/N5. In V/N5, if already any other routine is assigned, then copy it, rename to new number and add additional coding coding in VOFM. Then assign the new routine number in V/N5.
    Regards,

  • Free Goods for multiple line items of the same material

    Hi Friends,
    We have configured Free Goods to a particular material in such a way that if the customer orders 100 qty of Material A then he gets 10 qty of Material B free. This is working fine if there is only one line item of Material A with qty more than 100.
    However, if the order is created in such a way that there are two line items of material A for 50 qty each then the system is not giving the free material B, even though the total ordered qty in the sales order for material A is 100.
    How can this be configured in the system? Please Help.
    Regards,
    Abhishek

    What is the purpose of giving the same material as second line item.
    specify in the first line item itself.
    or els the condition record which you have specified that for 100 material of A gives 10 material of B modify it to 10 of A should give 1 material of B
    The first you will be useful for you.

  • Free Goods determination -acess sequence sales org/ plant/material

    Hi
    I am trying to determine the free goods by choosing the key combination as Sales org/plant/material.
    The system is not determineing the free qty ,instead when i maintain the condition record with customer/Material key combination ,then the system is determineing the free qty.
    I also tried to put acess Sequence Sales org/plant/material above the Acess sequence customer/Material,but still the system not detrmineing the free qty in the order.
    can any one pl gide me how to solve this issue.
    regards
    shashi

    Hi
    Go to the access sequence where Sales org/Plant/Material are maintained as condition table.
    Now select the condition table and then click the node "Fields" on the left hand side of the screen.
    It may give a warning message that "Fields are not yet generated". Just ignore this and Enter once again.
    Do this until it takes you to a screen where you can see fields like KOMK-VKORG, KOMK-WERKS and KOMP-MATNR
    Now create the condition records and check in transaction by creating sales order. It shoudl work.
    Hope this helps.
    You can reward if it helps you

  • CIN - Excise value posting for the material document

    Hi,
    We have assigned the routine 356(FV64A356) in the Pricing Procedure for Depot Sales where Service team issues components for the Service repair job through a Goods Issue(MIGO-261 Mvt Type) document.We are also able to create a excise invoice for the material document.
    The flow is Service Order - Goods Issue - through resource related billing a DMR is generated for the labour as well as the Goods Issued(MIGO-261), from DMR a debit memo is raised to invoice the Customer.
    The formula in the routing is, during the creation of Billing or Proforma document it picks up the excise value posted for the delivery if the excise has been posted,if the delivery is not found, then it continues with the excise value calculated in the sales order (DMR in this case)
    Is there any way or any other routine "to check for the excise value posted for the delivery ,if the delivery is not found, then check for the material documents if any linked to DMR(through Service Order)".
    Could anyone help in this regard.
    Thanks,
    Ramki.

    Hi,
    While creating the excise challan using J1IF01 you can see a excise invoice selection tab, Select the J1IF01 line item & click on this tab, here you can select the excise invoice from which the base amount will be determined.
    Thanks & Regards,

  • Populating parts of form based on Value entered in the first field

    Hello,
    I am trying to create a form, where user will enter the serial number of his equipment and I want him to click a verify button next to it.Upon clicking the verify button I want the Item Description field of the form to be updated ( this info is pulled from a backend MySql DB).Also, the text fields corresponding to the Equipment Site to be populated.After checking all the info, user should be able to click a submit button at the end of form and this information should be written to another table.I attached a Insert record server behaviour to form.Essentially, I want to attach a different action to both buttons on the form.In my view this is same a when we fill those registration form and based on our country, our state drop down gets populated.It seems this is doable, but I am not able to figure out how.I would really appreciate any help
    Thanks

    This is very simple if you understand PHP code. Basically, you give the two buttons different names, and use PHP conditional logic to control what happens. Call one button "verify" and the other "insert". If you use the POST method, you control the script like this:
    if (array_key_exists('verify', $_POST) {
      // create a recordset to retrieve the details ready for display
    } elseif (array_key_exists('insert', $_POST) {
      // insert the details in the the new table
    If you're not comfortable coding PHP yourself, the easy way to do it with Dreamweaver server behaviors is to use separate pages. In the first page, just create a form for the user to enter the serial number. Use the GET method to send the serial number to a separate page. In the new page, use the URL parameter containing the serial number to create a recordset to populate the insert form. Then apply an Insert Record server behavior using the POST method to insert the details into a new table.

  • Set default values for StartMonth and EndMonth Parameter based on value selected from the previous parameter(Not cascading)

    I have a scenario where it has multiple parameters like.....
    Period which consists of "Year,Quarter,Month" as a values.
    When user selects "Year" value in "Period" Parameter then "FromMonth" has to set its default value as 36th month from now.
    Example: If user selects "Year" then "FromMonth" has to show "April-11".
    When user selects "Year" value in "Period" Parameter then "EndMonth" has to set its default value as current month.
    Example: If user selects "Year" then "FromMonth" has to show "March-14".
    If user selects "Month" Value in "Period" Parameter then it has to allow user to select the Month Range and again if user selects "Year" value in "Period" Parameter then StartMonth has to show 36th month from now and
    End Month has to show current month.
    Please help me how to resolve this issue.
    Thanks in Advance.

    Hi  Vasu_479,
    First, you need to create a dataset to set the StartDate and EndDate parameter's value using the query provided by Visakh. And then use the StartDate and EndDate parameter to filter the data in MDX query. Here is a sample query for your reference.
    select
    {[Measures].[Internet Sales Amount]
    } on columns,
    {[Date].[Date].members} on rows
    from(
    select
    STRTOMEMBER("[Date].[Date].&["+@StartDate+"]"):STRTOMEMBER("[Date].[Date].&["+@EndDate+"]")
    ) on columns
    from [Adventure Works]
    Hope this helps.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Free Goods not getting Determined at the Order Level

    Dear All,
    I have activated free goods settings and also maintained free goods master record for exclusive free goods.However when I am entering the main line item the second line item in the sales order which should contain the free qty is not coming,please advice what needs to be done.
    Kind Regards
    Atul

    Hi Jelena,
    Thanks for your post with this I could find out what was happening.The following is the analysis once I switched on the free goods determination at the order level and below was the system response.
    Diagnosis
         There are certain business transactions where it is not possible to
         determine free goods in the SAP standard system: reason 3
         Explanation of reasons
         1      Document category is not from sales order category (VBTYP <> 'C'
         2      Lower-level item
         3      Bill of material
         4      Product selection
         5      Configurable item
         6      Scheduling agreement/forecast delivery schedule
         7      Item with active ingredient management
         8      Item without schedule lines
    I had found that in my item category the structure scope was marked as A where it was exploding the single level bill of material.Once this configuration was turned blank which is no explosion the free goods were getting determined.
    Kind Regards
    Atul

  • Ordered item to absorb the cost of the free goods

    We have created an exclusive free goods agreement and we would like the ordered item to absorb the cost of the free goods.  In order to transfer the correct information to CO-PA from SD billing, what should we do? Can anybody explain briefly?

    Hi Yasar,
    we do the setting for this in copy controls from delivery to billing.
    pl go to t.code VTFL, select the item which is required to abasorb the cost.
    there you will find a check box " cummulate cost ". Tick it here, this will make the cost of the free item to be transferred to the main item. This can also be used even incase of BOM's.
    regards
    sadhu kishore

Maybe you are looking for