.exe to start a .vi ??
So I have recently received a code to examine/modify. It is set up to run a machine, and when the operating computer is turned on, it automatically runs a xxx.exe which opens the top level VI xxx.vi however, the .exe displays a labview symbol rather than folder symbol of a .exe, making me think it was created by labview.
Furthermore, everything(spicifically the run and abort buttons) are removed from the task bar, but there are not any functions on the block diagram that have removed them.
I am just getting introduced to 8.2 from 8.0, (Full) . Can anyone explain to me how this was done, or direct me to somewhere else where more info is available.
Thanks, Kevin
Most likely, the program you are seeing was created using the application builder, which is included for LabVIEW professional and higher (but can be purchased as an addon for e.g. LabVIEW full development system).
To build an applications, you need to start out with a LabVIEW project and then create a new build specification for an application(exe).
For details, have a look at the Application note: Distributing Applications with the LabVIEW Application Builder.
Message Edited by altenbach on 06-14-2007 04:50 PM
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
As described above, I have several instances of plugin-container.exe running, which is OK. It would make me feel safer to know which plugins are running inside each of these, since I would be better able to know whether there is malware running inside one of them, or which website might have made the process start hogging memory.
I am a power user, I usually have 80-100 tabs open, and of course it is hard to track the website or plugin down without having to waste a lot of time.
Could you provide in future releases this information?
Is it already available under one of the about: pages (e.g. config, plugins, memory, etc?)Thanks Efreak! <br><br>
Maybe I was not clear. I usually have 4-5 plugin-container.exe processes running. I know now that the large one that hogs is the Adobe Flash player, but, for example I don't know which plug-in initiated the other plugin-container.exe instances.<br><br>
One of them actually says "googletalkplugin.exe" if you dig deep, which is OK. At least I know why the plugin-container.exe was started. But there are other instances that are just there and there is no way to figure out which plug-in initiated it.<br><br>
This would of course also help figure out if it is really the Adobe Flash plug in that is hogging all the memory, OR even if within Firefox in the about: pages one could figure out which TABS are using which plug-ins.
Like that you could freely choose to terminate the process directly, or close the TAB.<br><br>
1) What I am looking for is a way to determine which plug-in is running under which instance of plugin-container.exe<br>
2) Additionally it would be great to have a summary of which TABS are using which plugins (e.g. in the about:plugins page or yet another about: page)
<br><br>
Thank you -
iTunes will not start on my PC. I get a runtime error from the Visual C++ runtime library when iTunesHelper.exe is started. The message states the application attempted to load the library incorrectly. How is the problem to be resolved?
Click here and follow the instructions.
(99035) -
Jcontrol.exe not starting after creating ssl certificate
hi,
Iu00B4ve got a netweaver AS Java (only) 640 SP19. I tried to create a SSL certificate (Test) with visual admin and after importing "getCert" i wanted to restart the SAP-System. The problem is that jcontrol.exe has not been started and stayed grey (status: stopped).
Hereu00B4s a part of the dev-trace:
[Thr 3796] Thu Nov 20 16:17:36 2008
[Thr 3796] *** ERROR => invalid return code of process [bootstrap_ID103537200] (exitcode=-2) [jstartxx.c 1465]
[Thr 3796] JControlExecuteBootstrap: error executing bootstrap node [bootstrap_ID103537200] (rc=-2)
[Thr 3796] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID103537250]
[Thr 3796] INFO: Unknown property [JLaunchParameters=]
[Thr 3796] [Node: server0 bootstrap] java home is set by profile parameter
Java Home: D:\apps\j2sdk1.4.2_17-x64
dev_bootstrap:
trc file: "D:\usr\sap\CCM\JC10\work\dev_bootstrap", trc level: 1, release: "640"
node name : bootstrap
pid : 1992
system name : CCM
system nr. : 10
started at : Thu Nov 20 16:17:32 2008
arguments :
arg[00] : D:\usr\sap\CCM\JC10/j2ee/os_libs/jlaunch.exe
arg[01] : pf=D:\usr\sap\CCM\SYS\profile\CCM_JC10_iswdmz5
arg[02] : -DSAPINFO=CCM_10_bootstrap
arg[03] : pf=D:\usr\sap\CCM\SYS\profile\CCM_JC10_iswdmz5
[Thr 3736] Thu Nov 20 16:17:32 2008
[Thr 3736] INFO: Unknown property [box.number=CCMJC10iswdmz5]
[Thr 3736] INFO: Unknown property [ms.host=iswdmz5]
[Thr 3736] INFO: Unknown property [ms.port=3611]
[Thr 3736] INFO: Unknown property [system.id=10]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties]
-> ms host : iswdmz5
-> ms port : 3611
-> OS libs : D:\usr\sap\CCM\JC10\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
Instance properties
-> ms host : iswdmz5
-> ms port : 3611
-> os libs : D:\usr\sap\CCM\JC10\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
-> [01] bootstrap_ID10353720 : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
-> [02] bootstrap_ID10353725 : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID103537200 : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
-> [01] ID103537250 : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
[Thr 3736] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 3736] JLaunchRequestQueueInit: create pipe listener thread
[Thr 3564] JLaunchRequestFunc: Thread 3564 started as listener thread for np messages.
[Thr 3732] WaitSyncSemThread: Thread 3732 started as semaphore monitor thread.
[Thr 3736] NiInit2: NI already initialized; param 'maxHandles' ignored
[Thr 3736] [Node: bootstrap] java home is set by profile parameter
Java Home: D:\apps\j2sdk1.4.2_17-x64
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : D:\apps\j2sdk1.4.2_17-x64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : 1.4.2_17-b06
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 128M
-> root path : D:\usr\sap\CCM\JC10\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : D:\usr\sap\CCM\JC10\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\CCM\JC10\j2ee\os_libs\jstartup.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID1035372
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout: 120000
[Thr 3704] JLaunchIStartFunc: Thread 3704 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
-> stack : 2097152 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: -Denv.class.path=d:\apps\SAPJCo\sapjco.jar
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -Djco.jarm=1
-> arg[ 5]: -Dsys.global.dir=D:\usr\sap\CCM\SYS\global
-> arg[ 6]: -Dapplication.home=D:\usr\sap\CCM\JC10\j2ee\os_libs
-> arg[ 7]: -Djava.class.path=D:\usr\sap\CCM\JC10\j2ee\os_libs\jstartup.jar;.\bootstrap\launcher.jar
-> arg[ 8]: -Djava.library.path=D:\apps\j2sdk1.4.2_17-x64\jre\bin\server;D:\apps\j2sdk1.4.2_17-x64\jre\bin;D:\apps\j2sdk1.4.2_17-x64\bin;D:\usr\sap\CCM\JC10\j2ee\os_libs;D:\usr\sap\Python\.;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;D:\apps\SAPJCo;D:\apps\j2sdk1.4.2_17-x64\bin;D:\usr\sap\CCM\JC10\exe;D:\usr\sap\CCM\SYS\exe\run
-> arg[ 9]: -Dmemory.manager=128M
-> arg[ 10]: -Xmx128M
-> arg[ 11]: -DLoadBalanceRestricted=no
-> arg[ 12]: -Djstartup.mode=BOOTSTRAP
-> arg[ 13]: -Djstartup.ownProcessId=1992
-> arg[ 14]: -Djstartup.ownHardwareId=D2128917885
-> arg[ 15]: -Djstartup.whoami=bootstrap
-> arg[ 16]: -Djstartup.debuggable=yes
-> arg[ 17]: -DSAPINFO=CCM_10_bootstrap
-> arg[ 18]: -DSAPSTARTUP=1
-> arg[ 19]: -DSAPSYSTEM=10
-> arg[ 20]: -DSAPSYSTEMNAME=CCM
-> arg[ 21]: -DSAPMYNAME=iswdmz5_CCM_10
-> arg[ 22]: -DSAPDBHOST=
-> arg[ 23]: -Dj2ee.dbhost=iswdmz5
[Thr 3704] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [bootstrap]
-> arg[ 0]: com.sap.engine.bootstrap.Bootstrap
-> arg[ 1]: ./bootstrap
-> arg[ 2]: ID1035372
[Thr 3708] Thu Nov 20 16:17:34 2008
[Thr 3708] JLaunchIExitJava: exit hook is called (rc=0)
[Thr 3708] JLaunchCloseProgram: good bye (exitcode=0)
and the jvm_bootstrap.out:
Bootstrap MODE:
<INSTANCE GLOBALS>
determined by parameter [ID1035372].
Missing RunningMode property - runningin NORMAL mode.
Instance [ID1035372] will run in [NORMAL] mode, performing action [NONE]
Discovered property [instance.en.port] with value [3211] !
Discovered property [instance.en.host] with value [iswdmz5] !
Synchronizing file [.\.hotspot_compiler].
...Synched ok!
Synchronizing file [..\..\SDM\program\.hotspot_compiler].
...Synched ok!
Synch time: 922 ms
I hope this is enough information. Before importing the certificate from the SAP Support Portal the AS Java runned perfectly.
regards
Tobias NagelAdditional information:
When I deactivate SSL by switching from automatic starting to manual starting in the configtool the jcontrol.exe process starts without any errors. -
Creative Cloud Setup.exe not starting up.
I am running windows 8.1 on my laptop and I am having difficulties getting the CreativeCloudSet-Up.exe to start. I tell the program to run, but nothing occurs after that on my computer. After futher Inspection by using the task manager, I see that the application is physically running on my computer but yet the installer is not appearing on my screen. I also have tried launching the creative cloud setup application as administrator. Also, I am fairly sure that the setup app is broken because no quatily setup app would be only 657 kilobytes, unless your living in the 90's/early 2000's. Bottom line, how do I get the creativecloudset-up.exe to run correctly in stead of just hanging on my computer and displaying nothing.
Here are my laptops specs:
intel i5 processor
Nvidia geforce 820M
8 gb ramChristopher King 214 I would recommend utilizing the steps listed in Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to install the Creative Cloud Desktop application. You may want to try utilizing a different web browser. I would also recommend checking the settings of the security/firewall software to ensure they are allowing the download and installation process to occur.
-
Fixbspflvr_nt64.exe cannot start or run due to incompatibility with 64-bit
Hello Folks,
Before doing an upgrade from DB2 9.5 FP 4 to 9.7 FP 2, when executed fixbspflvr_nt64.exe as per SAP Note 1332109 got
the following message:
"The program or feature fixbspflvr\fixbspflvr_nt64.exe" cannot start or run due to incompatibility with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows copatible version is available"
We are using AMD64 hardware. Did some one had the same issue and got resolution, please share...
Thanks,
ShyamHi Shyam,
Did you get any solution from SAP?
I am facing the same problem. I am unable to start my upgrade. I have raised SAP OSS message but I am yet to recieve a reply.
The tool is no longer available on IBM website too as they have released Fix pack 3.
Yuur help will be appreciated.
Thanks and Regards,
Karan Shah -
How can one powershell.exe session start up a new powershell.exe session in a new window?
How can one powershell.exe session start up a new powershell.exe session in a new window?
Er... good luck with that. :) If you know the shortcut that was used to launch the current window, you could pass that shortcut path to Start-Process, but that would only work if you did not move or resize the original window, etc. For
example, on my computer I can do this:
Start-Process 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Accessories\Windows PowerShell\Windows PowerShell.lnk' -
Tecra M9 - TPSMain.exe cannot start because CpePerf.dll not found
Hi and help,
have searched the web and found other forum threads with similar issues.
Tried all the suggestions to no avail. I am not great on the computer but can find my way around. Anyway....
After login messge following messages pop up in succession, along the lines of : TPSMain.exe cannot start because CpePerf.dll not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found
Computer works fine but Power Saver does not auto start and neither can i select it to from control panel.."toshiba power saver is not running",
so select it from Power options..."failed to start as CpuPerf.dll is not running"
Did all the searching on net and followed all advice... i.e. unistall power saver in safe mode, unistall toshiba common utilities neither can unistall fatal error 0x7e
So download Ccleaner, run checks, unistall with Ccleaner same fatal error.
Been on Toshiba support and tried to install Power Saver......same problem won't install .
So help help help if possible.
Computer is working fine but messages popping up are annoying and i would love power saver to prolong battery.
Tried system restore, though i doubt this affects the files...another problem "system restore could not complete"...tried this several times and cannot system restore either....what is going on???????
any help please
TimCheers for the advice Andrei,
so you suggest there is nothing i can do other than restore from Toshiba recovery disc. Do you think somebody with a bit more knowledge could do sort it out with a less drastic approach..i.e is it worth taking it into a shop? Or do you think they will just have to go down the same route?
If i follow your plan is it just a simple case of downloading all my docs, photos, bookmarks to an external hd and then inserting the recovery disc and following intructions.?? I guess this disc then formats the HD and then reinstalls all the components the laptop came with??? is it infact a drastic approach, or quite simple as a procedure...what do i stand to looose?
Also how do i save xp as this is a version i installed when working/ using my laptop for my previous employer and i no longer have access to the discs/product key.
also could you confirm if this procedure would sort out system restore. I have tried restoring again to several restore points and the procedure will not complete, so this function is definitely not working anymore.
Sorry for more questions but as you can see this is not familair territory for me!!
many many thanks
Tim -
How do I prevent iTunesHelper.exe and iPodService.exe from start-up?
How do I prevent iTunesHelper.exe and iPodService.exe from starting every time I boot my PC. I want them to start only when I start iTunes.
Thanks!
Dave
St. LouisHi,
iChat version through from version 2 to version 6 allowed you to choose whether to Save Transcripts of iChats.
It was a setting in the App Menu > Preferences > Messages pane.
In Messages beta this now longer happens and "Saving" is obligatory.
By default the Chats are stored in a folder called iChats and this is normally in the Documents folder. (they are still called iChats in Messages).
In addition Messages Beta also stores some iMessage info in the Home Folder/Library/Messages
You can access this via the Finder > Go Menu and holding the ALT ley to see the Library listing (It is normally invisible)
The info is held in the chat-db database.
At present you cannot turn Off saving the transcripts.
10:17 PM Friday; June 8, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
HelpPane.exe automatically starts with Windows 7 64bit.
HelpPane.exe automatically starts with Windows 7 64bit. I have to start task Manager and disable it or else it keeps popping up. I cant find where to disable this service from startup. Please Help.
Hello
I found a simple yet effective solution for this problem, my friend had the same issue so instinctively as a technician, I suspect this was a malware of somekind so I re-formatted and installed Win7 funny it's still there, so I did a Hard disk wipe using
Dalvik's and re-partitioned and formatted again, to my surprise it still have the same problem.
So I ask Mr. Goo' old Mr. Google for answer, but I've found more complications, sorry for the story, so without further a do, the solution.
Boot to safe mode. (may also work in "normal mode")
Go to Task Manager>
Click the Services Tab>
Right click "HelpPane.exe" or Help and support service>
Select Properties>
Click the Security tab>
Click the Advanced tab (for permissions options)
Then select the "permissions entries" one at a time>
Click Change Permissions>
Then click Edit>
CLEAR ALL THE CHECK BOX FOR ALL ENTRIES
This should prevent access to the HelpPane.exe to all users/programs.
This resolved my friends Windows 7 "Help and Support thingy" issue, hope it does yours too.
Message me for questions and/or clarifications/corrections.
Thank you -
No sound, explorer.exe not starting, no event viewer
I set up a new PC recently and installed Windows 7 Pro. Approximately once every few days I get a problem which, oddly, has several seemingly different manifestations. I mean that if I see one of these, all the others can be observed as well, until I reboot.
These manifestations are:
Windows Media Player will not play an audio file (.wav, .mp3), usually just hanging. VLC player will not hang but will not produce sound either. Video content is played OK though.
Explorer (if started by left clicking on the toolbar button) will bring up the message “Invalid signature” and won’t start. If started by right clicking and then selecting one of the folders in the “last used” list it will start OK though.
Computer – Manage will dim screen and display a UAC message (normally it would start straight away). After getting through this message, the “Computer Management” window will duly pop up, but it will be missing the Event Viewer item in the left panel.
I could find nothing suspicious in the event logs.I'm adding another image: Task Manager:
I thought it's worthwhile because total CPU usage shows 12% (and it stayed for a while around that value), but each individual process was consuming 0%.
There were a few error messages in Application and System logs but I think I saw them quite often, so they were not specific for this occasion. They are:
WMI error:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events
cannot be delivered through this filter until the problem is corrected.
User Profile Service warning:
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
10 user registry handles leaked from \Registry\User\S-1-5-21-1620775572-3903616698-3239891420-1000:
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary\Scanner
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary\Scanner
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Microsoft\SystemCertificates\My
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Microsoft\SystemCertificates\CA
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Microsoft\SystemCertificates\Disallowed
Search error:
Unable to initialize the filter host process. Terminating.
Details:
This operation returned because the timeout period expired. (HRESULT : 0x800705b4) (0x800705b4)
Distributed COM error:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
and APPID
{344ED43D-D086-4961-86A6-1106F4ACAD9B}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Service Control Manager error:
A timeout was reached (30000 milliseconds) while waiting for the Optimizer Pro Crash Monitor service to connect.
Service Control Manager error:
The Windows Modules Installer service terminated with the following error:
The handle is invalid. -
Winword.exe process starts at startup after installing Adobe Acrobat X Standard
I installed Adobe Acrobat X Standard on a Dell Latitude D610 running Windows XP Service Pack 3. Every time the machine is started up, Winword.exe appears in the Processes tab of task manager using up to 100% of the CPU. Word itself does not open. If I cancel the Winword.exe process, CPU usage drops to more usual levels. Starting Word also pushes CPU usage up to 100%. This did not occur before Acrobat X was installed. I used System restore to restore to a point before Acrobat was installed and the problems with Word did not occur. Re-installed Acrobat X and the problems re-appeared. System restore back to a previous point and the problems disappeared. I am using Word 2000.
Any ideas or suggestions would be welcome.
Thank you.I don't believe Acrobat X supports Word 2000. There could be some strange incompatibility. Since you have a bright and shiny Acrobat X, maybe its time to update Word and Windows, if for no other reason that the more modern versions are much more secure.
-
HI All,
I seem to be having some issues with getting BO XI running. THis is what anyone gets when logging into BO:
Error: Server ****** not found or server may be down (FWM 01003) null
Nothing has changed in terms of server ports no datasource. Now there have been numerous posts/resolutions on this, however none of them seem to work for me.
I have:
Restarted SIA and Apache Tomcat (in the recommended order)
Restarted the server
Checked the ODBC connection (localhost, MySQL installed as default alongside BO)
I have noticed that CMS.exe is shutting down a few seconds after SIA is started which looks like its casuing the issue, and the Event Viewer mentions it maybe either ports or the datasource. Both of these appear fine, so Im not sure what it is.
Any ideas?
Thanks,
Edited by: Systems Administrator on May 3, 2010 8:24 AMDoes your server have more that 1 network cards setup?
Try to add the name and IP address of the host directly in the hosts file.
Can you please check in <BOBJ installation directory>\BusinessObjects Enterprise 12.0\logging for errors in the log files of the CMS and the SIA?
Regards,
Stratos -
Hi,
UTLite33.exe from Campus Manager 3.3 does not want to start, it gives the following:
"UTLite33.exe is not a valid Win32 application"
ThanksIf you are getting this message on a system running Windows 7 64 bit, please refer to this article for the solution:
https://supportforums.cisco.com/message/3557044
Basically you need to copy the utlite33.exe to your Windows directory, right click on it and set it to Windows XP compatibility mode. Log out and back in and if your script calls it to run, you should see it under Task Manager > Processes. -
Error showing disp+work.exe while starting management console
Hai,
I tried to install ABAP 7.01 trial version to practice webdynpro.. I did almost like
installing msloopback adapter
installed maxdb
installed AS
installed SAPGUI
When I try to start management console it is giving disp+work.exe error .
With reference to previous threads I tried changing the myname property in stderr2.
My computer name was given as d5 but in the following error it is telling as d5-88bb1f5849dc_NSP_00 .
I changed my computer name as d5 in controlpanel->system->computername.
In management console below NSP server a blue box showing my computername with this extension 88bb1f5849dc... I think because of this the max char exceeds 20. Any idea to fix this....
*************************log file
DP_FATAL_ERROR => main: rdisp/myname=d5-88bb1f5849dc_NSP_00 exceeds 20 characters
DISPATCHER EMERGENCY SHUTDOWN ***
DISPATCHER EMERGENCY SHUTDOWN => main: rdisp/myname=d5-88bb1f5849dc_NSP_00 exceeds 20 charactersSure,.....
D:\SAP\NSP\SYS\exe\run\disp+work.EXE=>sapparam(2): fopenU("D:\SAP\NSP\SYS\profile\NSP_DVEBMGS00_d5-88bb1f5849dc","r"): No such file or directory
D:\SAP\NSP\SYS\exe\run\disp+work.EXE=>No Profile used.
D:\SAP\NSP\SYS\exe\run\disp+work.EXE=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Wed Feb 04 15:36:08 2009
ERROR => D:\SAP\NSP\SYS\exe\run\disp+work.EXE stopped: DpCheckProfile [dpxxdisp.c 1005]
this is what the error log....Can u pls just tell me how to change the parameter in the configtool under the secure store
Edited by: rupachandran gangadharan on Feb 4, 2009 5:13 PM
Edited by: rupachandran gangadharan on Feb 4, 2009 5:13 PM
Edited by: rupachandran gangadharan on Feb 4, 2009 5:14 PM -
Hi all,
We have a java stack N01 on our machine. We are unable to start the server successfully.. Problem is
jcontrol.exe is not starting. Its status is "Some Processes running" all the time.
In the AS JAVA Process Table of SAPMMC::::: SDM is starting successfully but dispatcher and server0 are not starting. Their status is "Starting FrameWork" all the time.
I gone through many forums in SDN but couldnot find a solution.
I am unable to start Visual Admin and ConfigTool also. I couldnot find any error message in the developer trace also.
I am trying to resolve this issue since 1 week but couldnot find a solution. Any help is greatly admired.
regards,
Ramakanth.DEV_DISPATCHER FILE..............
trc file: "D:\usr\sap\N01\JC03\work\dev_dispatcher", trc level: 1, release: "701"
node name : ID32078700
pid : 1576
system name : N01
system nr. : 03
started at : Wed Apr 28 17:09:52 2010
arguments :
arg[00] : D:\usr\sap\N01\JC03\exe\jlaunch.exe
arg[01] : pf=D:\usr\sap\N01\SYS\profile\N01_JC03_paritas
arg[02] : -DSAPINFO=N01_03_dispatcher
arg[03] : pf=D:\usr\sap\N01\SYS\profile\N01_JC03_paritas
[Thr 4028] Wed Apr 28 17:09:52 2010
[Thr 4028] *** WARNING => INFO: Unknown property [instance.box.number=N01JC03paritas] [jstartxx.c 841]
[Thr 4028] *** WARNING => INFO: Unknown property [instance.en.host=paritas] [jstartxx.c 841]
[Thr 4028] *** WARNING => INFO: Unknown property [instance.en.port=3204] [jstartxx.c 841]
[Thr 4028] *** WARNING => INFO: Unknown property [instance.system.id=3] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\N01\JC03\j2ee\cluster\instance.properties]
-> ms host : paritas
-> ms port : 3904
-> OS libs : D:\usr\sap\N01\JC03\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\N01\JC03\j2ee\cluster\instance.properties
Instance properties
-> ms host : paritas
-> ms port : 3904
-> os libs : D:\usr\sap\N01\JC03\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\N01\JC03\j2ee\cluster\instance.properties
-> [01] bootstrap_ID32078700 : D:\usr\sap\N01\JC03\j2ee\cluster\instance.properties
-> [02] bootstrap_ID32078750 : D:\usr\sap\N01\JC03\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID32078700 : D:\usr\sap\N01\JC03\j2ee\cluster\instance.properties
-> [01] ID32078750 : D:\usr\sap\N01\JC03\j2ee\cluster\instance.properties
[Thr 4028] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 4028] JLaunchRequestQueueInit: create pipe listener thread
[Thr 6788] WaitSyncSemThread: Thread 6788 started as semaphore monitor thread.
[Thr 4200] JLaunchRequestFunc: Thread 4200 started as listener thread for np messages.
[Thr 4028] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 4028] CPIC (version=701.2009.01.26)
[Thr 4028] [Node: dispatcher] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_17-x64
JStartupIReadSection: read node properties [ID32078700]
-> node name : dispatcher
-> node type : dispatcher
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_17-x64
-> java parameters : -verbose:gc -Djava.security.policy=./java.policy
-> java vm version : 1.4.2_17-b06
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> stack size : 2M
-> root path : D:\usr\sap\N01\JC03\j2ee\cluster\dispatcher
-> class path : .\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\N01\JC03\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\N01\JC03\exe\jstartup.jar;D:\usr\sap\N01\JC03\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50000
-> shutdown timeout : 120000
[Thr 4028] JLaunchISetDebugMode: set debug mode [no]
[Thr 7348] JLaunchIStartFunc: Thread 7348 started as Java VM thread.
[Thr 7348] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [dispatcher]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -verbose:gc
-> arg[ 4]: -Djava.security.policy=./java.policy
-> arg[ 5]: -Dsys.global.dir=D:\usr\sap\N01\SYS\global
-> arg[ 6]: -Dapplication.home=D:\usr\sap\N01\JC03\exe
-> arg[ 7]: -Djava.class.path=D:\usr\sap\N01\JC03\exe\jstartup.jar;D:\usr\sap\N01\JC03\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
-> arg[ 8]: -Djava.library.path=C:\j2sdk1.4.2_17-x64\jre\bin\server;C:\j2sdk1.4.2_17-x64\jre\bin;C:\j2sdk1.4.2_17-x64\bin;D:\usr\sap\N01\JC03\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Program Files\Intel\DMIX;C:\j2sdk1.4.2_19;D:\usr\sap\SM1\DVEBMGS01\exe;D:\usr\sap\trans\bin;D:\usr\sap\N01\SYS\exe\uc\NTAMD64
-> arg[ 9]: -Dmemory.manager=256M
-> arg[ 10]: -Xmx256M
-> arg[ 11]: -Xms256M
-> arg[ 12]: -Xss2M
-> arg[ 13]: -DLoadBalanceRestricted=no
-> arg[ 14]: -Djstartup.mode=JCONTROL
-> arg[ 15]: -Djstartup.ownProcessId=1576
-> arg[ 16]: -Djstartup.ownHardwareId=P0481508315
-> arg[ 17]: -Djstartup.whoami=dispatcher
-> arg[ 18]: -Djstartup.debuggable=no
-> arg[ 19]: -Xss2m
-> arg[ 20]: -DSAPINFO=N01_03_dispatcher
-> arg[ 21]: -DSAPSTARTUP=1
-> arg[ 22]: -DSAPSYSTEM=03
-> arg[ 23]: -DSAPSYSTEMNAME=N01
-> arg[ 24]: -DSAPMYNAME=paritas_N01_03
-> arg[ 25]: -DSAPDBHOST=paritas
-> arg[ 26]: -Dj2ee.dbhost=paritas
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 7348] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [dispatcher]
[Thr 6988] Wed Apr 28 17:09:53 2010
[Thr 6988] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 6988] Wed Apr 28 17:09:54 2010
[Thr 6988] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 6988] JLaunchISetClusterId: set cluster id 32078700
[Thr 6988] Wed Apr 28 17:09:55 2010
[Thr 6988] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 6988] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Wed Apr 28 17:10:00 2010
[GC 69952K->4805K(253440K), 0.0204734 secs]
[Thr 6864] Wed Apr 28 17:10:01 2010
[Thr 6864] JLaunchISetP4Port: set p4 port 50304
[Thr 4200] Wed Apr 28 17:10:54 2010
[Thr 4200] JLaunchRequestFunc: receive command:17, argument:0 from pid:4844
[Thr 4200] JLaunchIShutdownInvoke: set shutdown interval (stop:1272454854/end:1272454974/TO:120)
[Thr 4200] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 4200] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 6544] Wed Apr 28 17:11:29 2010
[Thr 6544] JLaunchISetTelnetPort: set telnet port 50308
[Thr 6544] JLaunchISetTelnetPort: set telnet port 50308
[Thr 4028] Wed Apr 28 17:12:56 2010
[Thr 4028] *** WARNING => Reached shutdown timeout -> terminate [jlnchxxi.c 362]
[Thr 4028] JLaunchCloseProgram: good bye (exitcode = -4)
Edited by: vramakanthv on Apr 28, 2010 1:56 PM
Maybe you are looking for
-
Turkey: year end close RFSUMB00 / fiscal year variant
Hello guys, I am wondering if anyone of you have had this requirement before. Running RFSUMB00 on a Turkish company code will blow away the balances from all G/L accounts so that each individual account has a balance of 0. Questions: 1. How do you ma
-
Hi, I'm creating a Boggle game in Java and I'm in need of help importing what outputs on the 'status' into the JTextArea called 'textL' which is the left text area of the program. If you run the program, it should show a main panel with two text area
-
HI I am trying to create DTP for a master data infobject, before i do any change, i m getting a message "Enter a valid value" and am unable to proceed further plz help Regards
-
Iweb problems now mobileme no longer exists?
Hi, I recently downloaded Mountain Lion and have icloud as I understood this would allow me to use iweb and publish my site via icloud. I have since learnt that you can no longer do this. I'm not very technical but just wondered if someone can help.
-
Restoring a switch after a swapout
Hello all I'm looking to update our documentation on MDS9000 switch recovery - specifically replacing the whole switch after an swapout. The MDS cookbook has a procedure for replacing one but makes no mention of what to do differently if the switch i