Executable task name 200429

I'm using LV8.5 with NI-DAQmx 8.6.  Getting error code -200429 "Value passed to the Task?Channels In control is an empty string (or I/O control).  The value must refer to a valid task or valid channel"
This error is intermittent, meaning sometimes it works, and sometimes it doesn't .. although it works most of the time.  However, the error only ever occurs with the executable version of the code, not in the development environment.  I have an indicator telling me the task name just before going into the sub vi where the error occurs (usually something like "_unnamedTask<1E1>"), but the indicator passed out of the sub vi that tells me the task name within shows a blank name ... thus the error.  So it appears the task name/reference is not be passed into the sub vi.  Any clues?
-John
Solved!
Go to Solution.

Post your VI's so we can see what is going on inside.

Similar Messages

  • Error "To run a SSIS package outside of SQL Server data tools you must install task name used in package of Integration service or highter.

    Hello Team,
    I am trying to execute a SSIS package from web page. When i try to do that i am getting following error.
    "To run a SSIS package outside of SQL Server data tools you must install <task name used in package> of Integration service or highter."
    In my machine Integration Services are installed and its service is also in running state.
    Please help me on this.
    Thanks,
    Ramesh
    Thanks, Ramesh Arige

    The SSIS package developed using SSIS 2008 Server R2 and Integrations Services 10.0 is exists in my machine. Is this wrong configuration, please help me on this.
    I am using the below code copied from CodeProject
    Thank you so much for responding.
    Ramesh
    Thanks, Ramesh Arige
    Which way are you using from the provided blog? Using 1) C# Code or 2) C# and Stored Procedure?
    Cheers,
    Vaibhav Chaudhari
    MCP, MCTS, MCSA (SQL Server 2012)

  • Full information about DAQmx Task Name - How get?

    Labview 7.1 (information required for solve problem)
    I put in my application a DAQmx Task Name for fast configuration but i want put all information about task in a txt or spreadsheet file. But in Labview 7.1 haven't VIs like (http://zone.ni.com/devzone/cda/tut/p/id/3079):
    - DAQmx Info Query
    - General DAQmx channel Info
    - General DAQmx TEDS Info
    I'm using Analog Input (Voltage and Accelerometers) with several configurations and I need register all data of configuration to re-execute in the future or know about how acquisition data were gotten.
    I think that solve is in property nodes(DAQmx Task, DAQmx Channel, DAQmx Timing), but I believe will be hard work to make. Somebody has this working?
    Leonardo de S. Cavadas
    Maintenance Engineer and Inspection - Bureau Veritas do Brasil
    Engineer Metallurgist with emphasis in Advanced Materials
    Technologist in Computer Science

    Sorry about that, I haven't checked if they were made only for LV 8 and later. Attached is a zip file with all the VIs converted to the version 7.1.
    Some of them were not successfully converted and are presenting fatal errors when opening, probably because they have something not available in 7.1. But I'm sending you anyways, because the three VIs you mentioned in your first post that you wanted, are working fine in LabVIEW 7.1.
    - DAQmx Info Query
    - General DAQmx channel Info
    - General DAQmx TEDS Info
    Please let me know if this is of any help for you or if I can do anything else in this case.
    Best Regards
    Andre Pereira
    Attachments:
    DAQmxTaskInfoQuery.zip ‏586 KB

  • Errors when attempt to execute task 'Approve and Deploy to Product'

    Hello all,
    I updated the pricelists from BCC, an error occurred when I attempted to execute task 'Approve and Deploy to Production', it shows ‘atg.epub.workflow.process.WorkflowProcessResources->invalidTargetName : There is no target with the given name Production.’
    Here is the ATGPublishing server error log:
    atg.process.action.ActionException: atg.epub.workflow.process.WorkflowProcessResources->invalidTargetName : There is no target with the given name Production.
    Can anyone tell me how to resolve this error. Thank you in advance.

    Check this in your production BCC component browser.
    /dyn/admin/nucleus/atg/epub/workflow/process/WorkflowProcessManager/?action=seedefinition&process=/Commerce/editCommerceAssets.wdl
    Search for approveAndDeployProject, you will find the target. Make sure its correct and same String value is used in BCC when creating sites.
    And make
    atg/epub/Configuration.properties
    queryWorkflowTargetByID=false
    Otherwise send me the contents from dyn/admin
    Peace
    Shaik

  • Error generating report job with the task name 'FSRM_Report_Task

    Since this morning we have been having a problem with FSRM on Windows Server 2008 R2, it is no longer running storage reports (both scheduled and on-demand).
    We get the following in the event logs:
    Log Name:      Application
    Source:        SRMREPORTS
    Date:          09/06/2014 08:09:55
    Event ID:      752
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      FILESERVER2.curriculum.riddlesdown.local
    Description:
    Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
    Context:
     - Exception encountered = Invalid argument: StorageType = '101'
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SRMREPORTS" />
        <EventID Qualifiers="0">752</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-09T07:09:55.000000000Z" />
        <EventRecordID>42920</EventRecordID>
        <Channel>Application</Channel>
        <Computer>FILESERVER2.curriculum.riddlesdown.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
    Context:
     - Exception encountered = Invalid argument: StorageType = '101'
    </Data>
      </EventData>
    </Event>
    We have uninstalled and reinstalled the FSRM role service but are still having the same problem.
    Anybody have any ideas?

    Hi,
    From the error message, it failed because of "invalid argument: storagetype = '101' ".
    101 means the storage type is "system" + "cache". Is there any change on your storage before the issue occurs? For example whether the source storage is changed?
    FsrmStorageModuleType enumeration
    http://msdn.microsoft.com/en-us/library/dd392346(v=vs.85).aspx
    If you have any feedback on our support, please send to [email protected]

  • MS Project - can you merge from a spreadsheet/access database based on task names?

    I'm wondering if it's possible to import data on certain tasks from a spreadsheet or access database. I know you can import tasks and append them, but I was hoping to:
    - Match a task name with the task name on the spreadsheet/access database
    - Update that task in MS project with information/fields in the spreadsheet/access database
    Can this be done? Thanks.

    Hi,
    In regarding the issue, my understanding is that you want to use Excel spreadsheet as database for the Project.
    I recommend you develop an import map that includes the key fields. Please refer to the link and do it step by step:
    http://www.techrepublic.com/blog/tech-decision-maker/importing-a-vendors-excel-schedule-into-microsoft-project/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If I misunderstanding something, please let me know and upload some sample about the Excel spreadsheet.
    Regards,
    George Zhao
    TechNet Community Support

  • How to change the output executable file name(a.prj:(output)--- b.exe)

    LabWindows / CVI： how to change the output executable file name
                For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
    I will try to save as a.prj b.prj, a.cws save as b.cws
    eg:a.prj  ---->(output)--->b.exe
    Solved!
    Go to Solution.

    You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
    See the complete description of available options here.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to Determine Task Key based on Task Name?

    Hi all, I'm trying to implement addProcessTaskInstance and I can't seem to dynamically obtain the task key. I want to find this based on the task name since this will be consistent through environments, but due to multiple development streams going on at once I can't be guaranteed that the task key will be the same in each in environment (i can be guaranteed it won't be actually). I'd rather not hard code the key in a variable in each environment if I can avoid it.
    Thanks,
    Ryan

    Hi Ryan,
    you could also use api to retrieve the task key.
              HashMap map = new HashMap();
              map.put("Process Definition.Tasks.Task Name", your_task_name);
              tcResultSet localtcResultSet = tcUtilityFactory.getUtility(tcDataProvider, "Thor.API.Operations.TaskDefinitionOperationsIntf").getTaskDetail(your_form_key, map);
              taskKey= localtcResultSet.getLongValue("Process Definition.Tasks.Key");
    This would be slower than database query though.
    Regards,
    Ece

  • Task name appears instead of workitem text

    Hi,
      I have a dialog task. Whn I test the WF frm my system, I am getting the workitem text specified for the task in PFTC and its working fine. but when i test the same workflow in another system with the same user id & pwd, i am not getting the workitem text. Instead the task name is displayed in the inbox.
    Any settings needs to be checked? Plz let me know.
    Thanks,
    Sivagami

    Hi, thr was no translated text maintained for the workitem text .the prob is solved.

  • Task Name Field, "Blank" ("") in 2007, "Empty" (Empty) in 2010, HOW TO FILD/FILTER for empty?

    In MS Project 2007, I can use VBA code in Excel and determine if the selected task “Name” field is blanks by using the code “pj.Activecell.text <> “”.
    In MS Project 2010, blank name cells are no longer “” (or blank), they are “Empty”. How do users filter for a non-standard value of “empty” then the text of “empty” is not in the task “Name” cell?

    Hi Dan,
    Since I almost know nothing about VBA and I can only read but not write code, I'll let John or Rod (VBA kings on this forum) jump in.
    But here is what I go recording the macro:
    Sub Macro1()
    SetAutoFilter FieldName:="Name", FilterType:=pjAutoFilterIn, Criteria1:=""
    End Sub
    Also ensure to have the latest version of Project 2010 since I noticed different behaviour with blank lines with 2 different versions.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • How can I configure MA to display "speaking" OpCode and Task names

    If you have a custom ETW Eventsource definition: PerfView reads and Displays from the etl files the OpCode and Task values not as integer but as defined in EventSource inner classe for Task and in the
    System.Diagnostics.Tracing.EventOpCode. My question is, how can I configure the MA to display the values not as "magic numbers" or can MA get this feature?
    Regards,
    Alexander
    Kind regards, Alexander

    Hi Paul,
    please take a look to the attached picture. I've tried to make a comparison between automatically behavior of PerfView and Message Analyzer by displaying of the same performance log. The Message Analyzer got metadata, generated with wevtutil. The related
    part of the manifest is here:
    <tasks>
    <task name="ReadingFromGdb" value="1"/>
    <task name="LogReadPreInvoke" value="65532"/>
    </tasks>
    <opcodes>
    </opcodes>
    <keywords>
    <keyword name="Perf" message="$(string.keyword_Perf)" mask="0x8"/>
    <keyword name="Gdb" message="$(string.keyword_Gdb)" mask="0x10"/>
    </keywords>
    <events>
    <event value="8" version="0" level="win:Verbose" message="$(string.event_LogGdbReadPreInvoke)" keywords="Perf Gdb" opcode="win:Start" task="ReadingFromGdb" template="LogGdbReadPreInvokeArgs"/>
    </events>
    <templates>
    <template tid="LogGdbReadPreInvokeArgs">
    <data name="fullName" inType="win:UnicodeString"/>
    <data name="methodName" inType="win:UnicodeString"/>
    </template>
    I hope, it helps you to understand details of my questions.
    Regards,
    Alexander
    Kind regards, Alexander

  • How can I localize the text of process names, task names and user actions within a process?

    I'm very interested in using the capabilities of Adobe LiveCycle Process Management for my project, however I have one rather large concern...   I hope someone here can tell me whether there's a way to address it.
    Since I work for the Government of Canada, I have to meet certain requirements relating to bilingualism of the user interface.  It's my understanding that the Workspace portion of LiveCycle has already has support for French.
    But what about the design of my processes?  How can I display text to a user in the language of their choice when they're interacting with my processes? ... in particular, I'm thinking about the process name, task names, and user actions.
    I hope that this is possible without too much pain.  I imagine this must be a pretty common requirement!
    Thanks in advance to all who respond.

    You can completely change the content of whole pdf by using "renderPDFForm" operation under service "FormsService". in this operation there is Template category where you can set the Locale.
    And if you need to change the other workspace options like Complete, Save as Draft , you can then import workspace ui project and then change apppropriate values.
    Thanks,
    Prashast

  • Execute Task works in one area but not the other

    I have two Execute SQL Tasks.  Each executes the same stored procedure from the SQL Statement property with a different parameter and they insert into the same table.  One is at the end of the package and only runs if a Rollback
    is done and it works fine.  The other runs when a script is performed and returns Failure.  When I run the other package and the Script fails the Execute SQL Task gets a green check mark but the table is not updated.
    I've messed with the properties and still no luck. 
    I can right-click on the SQL Task choose "Execute Task" and it works.
    I've run out of ideas.

    uspGenerateTasksForFailedSSISPackage is a stored procedure that inserts into a table. 
    ALTER PROCEDURE [dbo].[uspGenerateTasksForForFailedSSISPackage] 
     @strTaskDescription varchar(max) = NULL
     WITH RECOMPILE
    AS
    BEGIN
    SET NOCOUNT ON;
     Declare
      @dtEnteredDateAndDueDate date = GetDate(),
      @intTodoCategoryCode int = 13,
      @strEnteredBy varchar(20) = 'AUTO'
       INSERT INTO ToDos (UserID, EnteredBy, EnteredDate, DueDate, Description, CategoryCode)
       Values (@strEnteredBy, @dtEnteredDateAndDueDate, @dtEnteredDateAndDueDate, @strTaskDescription, @intTodoCategoryCode)

  • GRC PC3.0 Task name in work inbox = WI Text - cannot access the task detail

    Hi all
    We are using PC 3.0 -ECC6 has been upgraded to 6.05
    We cannot access PC tasks from the work inbox - this is true for all the users
    We can view the task - task name = WI TEXT
    Cannot click on the object name to get to task details
    Your help will be appreciate in case you face the same kind of issue
    Thanks
    Joelle

    SAP Note 1546241 solved the issue

  • What is the Executable file name of my new RXi report

    Hi friends,
    Im registering a new RXi report in oracle 11i. Can anyone pls tell me how can i identify the newly developed RXi Executable file name and its Execution method? Ive been searching for it for last several weeks but not found any. pls help me.
    Thanks in advance.
    LISAN

    Which module are you working in ? Pl see if these MOS Docs can help
    430075.1 - FAQ: RXi Reports (JGRX/RXJG, FARX/RXFA, APRX/RXAP, ARRX/RXAR)
    261318.1 - About RXi Executable Names
    HTH
    Srini

Maybe you are looking for

  • Unable to proceed in change document are not updating in CDHD, CDPOS tables

    Hi all, This is a question related to Change document. I created one custom Change document object ‘ZBUDGETS’. As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ‘ZBUDGETS’. I included some of

  • Can You Change The Video Thumbnail In iTunes?

    I have a few home made videos that are loaded on my itunes Movies. I would like to change the thumbnail view that iTunes displays. I know how to add thumbnail artwork by right clicking on the video file and selecting get info, but that is not what I

  • How to set airport extreme as primary base??

    Hi I have just spent literally all day trying to get rid of the flashing amber, finally I now have a steady green light. What I would like to know is what is the benefit of having the Airport extreme as my primary base and how do I do it. regards TIA

  • How do I get the rowid or the DataModel from a DataTable inside a DataTable

    Hi, I have a simple application which I cannot get to work. I have two entity classes: Parent and Child. I want to create a page which lists all of the Parents, and in a column of the Parent row has an inner dataTable which displays the Children of t

  • Hotspot ios 5.0.1 problems

    Since the upgrade I've been having problems is the hotspot function.  Connects to my laptop but no access to internet.  Anyone else with the same problems or solutions?  I've tried reseting my network settings but stil nothing. Thanks for the help.